23.02.2016 Views

Dirt Devil Verso - Bedienungsanleitung Dirt Devil Verso Nass/Trocken Handstaubsauger M410

Dirt Devil Verso - Bedienungsanleitung Dirt Devil Verso Nass/Trocken Handstaubsauger M410

Dirt Devil Verso - Bedienungsanleitung Dirt Devil Verso Nass/Trocken Handstaubsauger M410

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

3 Before use<br />

3 Before use<br />

3.1 Unpacking<br />

1. Unpack the appliance and all its accessories.<br />

2. Check the contents for completeness and<br />

possible damages (Fig. 1).<br />

NOTE:<br />

Immediately contact your dealer if you have<br />

found damage resulting from transport.<br />

ATTENTION:<br />

Always transport or ship the appliance in its<br />

original packaging to avoid damage. Keep<br />

the packaging for such an event. Dispose of<br />

no longer needed packaging material<br />

according to the laws of your country of residence.<br />

3.2 Setting up the charging station<br />

ATTENTION:<br />

Select a place for the charging station<br />

where the appliance is stable and always<br />

protected from heat and moisture during<br />

charging.<br />

A<br />

B<br />

NOTE:<br />

Upon delivery, the mains adapter's power<br />

cord is already connected to the charging<br />

station.<br />

If the mains adapter's power cord has unexpectedly<br />

come out of its socket (e.g. by getting<br />

caught when setting down the appliance)<br />

or if you have purposefully removed the power<br />

cord, you can re-attach it to the charging station<br />

as follows:<br />

2<br />

A<br />

3<br />

B<br />

1. Connect the mains adapter to the provided<br />

socket in the charging station (Fig. 2/A,<br />

B).<br />

2. Feed the mains adapter's power cord<br />

through the hole at the base of the charging<br />

station (Fig. 3/A).<br />

3. Pull the cable relief of the mains adapter's<br />

power cord through the hole until it cannot<br />

be pulled any further (Fig. 3/B).<br />

NOTE:<br />

The cable relief is intended to prevent the<br />

mains adapter's power cord, that has just<br />

been inserted, from coming out of its socket<br />

if the cable is unintentionally pulled on.<br />

18

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!