Dirt Devil Verso - Bedienungsanleitung Dirt Devil Verso Nass/Trocken Handstaubsauger M410
Dirt Devil Verso - Bedienungsanleitung Dirt Devil Verso Nass/Trocken Handstaubsauger M410
Dirt Devil Verso - Bedienungsanleitung Dirt Devil Verso Nass/Trocken Handstaubsauger M410
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 After use<br />
5.1 Emptying the dust container<br />
9<br />
10<br />
The compact dust container can only store<br />
a limited amount of dirt and liquid. So it is best<br />
to empty it after each vacuuming session.<br />
Make sure you always empty the dust<br />
container before and after vacuuming.<br />
1. Hold the appliance and dust container so<br />
they point down.<br />
2. Hold both the dust container and the motor<br />
unit firmly with one hand on each.<br />
3. Now pull back the three-in-one switch to<br />
release the dust container from the motor<br />
unit (Fig. 9).<br />
4. Remove the permanent filter from the dust<br />
container using the tab provided for this<br />
purpose (Fig. 10).<br />
5. Carefully tap out anything remaining or remove<br />
it by hand.<br />
6. Also clean the dust container (Chapter<br />
5.2, "Cleaning the dust container") and the<br />
filters on this occasion, Chapter 5.3,<br />
"Cleaning the filters".<br />
GB<br />
5.2 Cleaning the dust container<br />
WARNING:<br />
Danger of electric shock! When cleaning<br />
the dust container, always make sure that<br />
the motor unit (Fig. 1/5) by no means gets<br />
wet.<br />
1. First, disconnect the dust container from<br />
the motor unit (Fig. 9) and empty it<br />
(Fig. 10).<br />
2. Now rinse out the dust container with running<br />
cold or hand-warm water (Fig. 11).<br />
ATTENTION:<br />
Do not use hard brushes, cleaning or scouring<br />
agents or alcohol, as these might damage<br />
the appliance's housing.<br />
3. Use this opportunity to clean the filter inserts,<br />
Chapter 5.3, "Cleaning the filters",<br />
before putting them back in, Chapter<br />
5.4, "Fitting the filters".<br />
4. Let the dust container dry completely before<br />
putting it back onto the motor unit,<br />
Chapter 5.5, "Assembling the appliance".<br />
11<br />
21