Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - SLV
Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - SLV
Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - SLV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGLISH 9<br />
Charging<br />
Charging takes approx. 1 h<strong>ou</strong>r.<br />
A fully charged shaver has a shaving time of up to 50 minutes.<br />
Note: Y<strong>ou</strong> cannot use the appliance while charging.<br />
Charge the shaver before y<strong>ou</strong> use it for the first time and when the display<br />
indicates that the battery is almost empty .<br />
Charging with the adapter<br />
1 Make sure the appliance is switched off.<br />
2 Insert the small plug into the appliance (1) and put the adapter in<br />
the wall socket (2).<br />
Charging in the SmartClean system<br />
1 Put the small plug in the SmartClean system.<br />
2 Put the adapter in the wall socket.<br />
3 Press the top cap to be able to place the shaver in the holder<br />
(‘click’).<br />
4 Hold the shaver upside down above the holder. Make sure the front<br />
of the shaver points towards the SmartClean system.<br />
5 Place the shaver in the holder (1), tilt the shaver backwards (2) and<br />
press down the top cap to connect the shaver (‘click’) (3).<br />
Note: The battery symbol lights up to indicate the appliance is charging.
Change language