Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
REFER<strong>EN</strong>CE<br />
87<br />
Diagnostics<br />
If the Following Messages Appear<br />
If the following messages appear, check the status again, referring to the cause and action.<br />
(PND): Display on the PND screen.<br />
(LCD): Display on the Sub-display.<br />
Message Cause Action<br />
In CD/MP3 WMA/DVD <strong>mode</strong><br />
DISC CHECK (PND)<br />
INF3 (LCD)<br />
DISCS ARE DIRTY OR<br />
DAMAGED<br />
The loaded disc is dirty or upside<br />
down. Check it for proper<br />
orientation and verify it is clean.<br />
DISC CHECK (PND)<br />
INF5 (LCD)<br />
CD PLAYER FAILS<br />
MECHANICALLY<br />
The CD player is inoperative for<br />
some reason.<br />
DISC ERROR (PND)<br />
INF6 (LCD)<br />
WH<strong>EN</strong> THE CD PLAYER<br />
INTERNAL TEMPERATURE IS<br />
HIGH (TO PROTECT PICKUP<br />
UNIT)<br />
● The temperature in the CD<br />
player is too high for operation<br />
to continue. Wait till it cools<br />
down.<br />
● Resume playing after the<br />
“High temperature sensed and<br />
CD stopped” message<br />
disappears. If the CD still<br />
cannot play, have your dealer<br />
repair it.<br />
DISC ERROR (PND)<br />
INF7 (LCD)<br />
NO SUPPORT (PND)<br />
ERR (LCD)<br />
DISC CHECK (PND)<br />
INF3 (LCD)<br />
DISC ERROR (PND)<br />
DISC ERROR (PND)<br />
INF6 (LCD)<br />
Pass code incorrect (PND)<br />
- - - - (LCD)<br />
Parental lock enabled (PND)<br />
ERR (LCD)<br />
Currently this function is disabled.<br />
(PND)<br />
- - - - (LCD)<br />
AN INTERNAL POWER SUPPLY<br />
FAILURE IS OCCURRING<br />
NO CORRECT FILE IN CD<br />
The CD/MP3 WMA/DVD is dirty,<br />
scratched, warped or upside<br />
down.<br />
The CD/MP3·WMA or DVD player<br />
is not operating for some reason.<br />
The temperature of the CD/<br />
MP3·WMA or DVD player has<br />
become unusually high.<br />
This message is displayed when<br />
the pass code that has been<br />
entered is not correct.<br />
Viewing restrictions are enabled.<br />
A function that has been disabled<br />
was selected with the menu.<br />
● Turn the ACC off once before<br />
turning it on once again to<br />
resume operation.<br />
● If this condition persists,<br />
please contact your dealer.<br />
Confirm the file.<br />
Clean the disc if it is dirty. Insert<br />
the disc correctly if it is<br />
upsidedown. Do not use the<br />
scratched or warped disc.<br />
Eject the disc.<br />
Without performing any other<br />
operations, wait until the<br />
temperature comes down * .<br />
Enter the correct pass code.<br />
Change the setting for viewing<br />
restrictions and start again.<br />
(See page 69)<br />
Follow the directions on the<br />
screen and start again.