Toyota Ipod Integration Kit English, French, German, Dutch, Italian - PZ420-00261-ME - Ipod Integration Kit English, French, German, Dutch, Italian - mode d'emploi
Toyota Ipod Integration Kit English, French, German, Dutch, Italian - PZ420-00261-ME - Ipod Integration Kit English, French, German, Dutch, Italian - mode d'emploi
Toyota Ipod Integration Kit English, French, German, Dutch, Italian - PZ420-00261-ME - Ipod Integration Kit English, French, German, Dutch, Italian - mode d'emploi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating Instructions<br />
Radio Image<br />
A sketch of the radio design with reference<br />
to the button functions can be found in the<br />
vehicle owner’s manual in the section related to<br />
audio operation.<br />
Connecting iPod<br />
Plug the dock connector coming from the<br />
adapter unit in your iPod player.<br />
m Connect only the dock connector to the<br />
iPod so that this unit works properly.<br />
When the ignition is set to ACC or ON, the iPod<br />
will be activated automatically. A check mark<br />
will appear on the iPod’s screen and after a few<br />
seconds it will be replaced by the brand vehicle<br />
logo. iPod is ready to be used.<br />
While the iPod is connected to this unit, the iPod<br />
itself cannot be turned on or off; the battery of<br />
the iPod will be charged automatically.<br />
When the iPod is connected while playing, the<br />
song will be paused.<br />
When the ignition is switched to OFF the iPod<br />
will be put into sleep <strong>mode</strong>. With the ignition<br />
set to off, the iPod will not be charged.<br />
The iPod Adapter Unit supports the following<br />
iPod <strong>mode</strong>ls: iPod Generation 4, iPod Photo,<br />
iPod Nano, iPod Mini, iPod Generation 5.<br />
Note:<br />
- For information related to the iPod player,<br />
please visit the Apple website.<br />
Disconnecting iPod<br />
iPod can be disconnected from his unit at<br />
any time. When removing the iPod from this<br />
unit when the ignition is ON, the vehicle logo<br />
disappears and the iPod is returning to its<br />
normal operation after a few seconds.<br />
Power On/Off<br />
Press [PWR-VOL] knob to switch the power on.<br />
Press [PWR-VOL] again to switch the power off.<br />
Volume Up/Down<br />
Turn [VOLU<strong>ME</strong>] clockwise to increase the volume.<br />
Turn [VOLU<strong>ME</strong>] counter clockwise to decrease<br />
the volume.<br />
Selecting iPod Mode<br />
Press [DISC] on the head unit to select iPod<br />
<strong>mode</strong>.<br />
Each time [DISC] is pressed, the <strong>mode</strong>s change<br />
as follows:<br />
Internal CD or CD CH ‡ external CDCH1 (=iPod)<br />
‡ (external CDCH2) ‡ internal CD or CD CH.<br />
Note:<br />
- As the iPod adapter is connected through<br />
the external CD changer interface, the radio<br />
will indicate the external CD Changer <strong>mode</strong>.<br />
Equalizing within iPod Mode<br />
Press [EQ] or [CONTROL] on the head unit to<br />
adjust the settings of Bass, Treble, Balance and<br />
Fader.<br />
Note:<br />
- Also the EQ settings on the iPod will effect<br />
the sound. To adjust the iPod EQ settings,<br />
please refer to iPod User manual.<br />
Playlist Concept<br />
The iPod adapter can play music titles of the<br />
iPod which are organized in Playlists.<br />
The iPod interface does not support the<br />
functions selected by artist, by album, by genre.<br />
We recommend to organise the iPod content in<br />
Playlists using iTunes.<br />
The Playlists will be equal to and listed in the<br />
same order as on the iPod and on the head<br />
unit, except for the first one.<br />
iPod