Toyota Bluetooth SWC English French German Dutch Italian - PZ420-00291-ME - Bluetooth SWC English French German Dutch Italian - mode d'emploi

Connecting your phone to the Bluetooth ®
hands-free system
Before you can use this system, you must complete a Bluetooth ® connection between your car and
your phone. You establish a Bluetooth ® connection between car and phone with a paired link.
When you set up a paired link, the system remembers the phone’s ID. Once the car and phone are
paired, the system automatically connects to your phone every time you turn on the ignition.
This system supports paired links with up to 4 phones.
Note:
The process of initiating a Bluetooth ® connection with a phone varies per phone
manufacturer. For more information, refer to the user’s guide for your phone.
Initial pairing
Note:
Use this procedure only if there are no handsets paired to the system.
Seated in the car and ignition turned on:
Action
1 Press and hold the mode button.
2 When prompted, say “Pair phone”.
The system responds: Set your phone in scan mode and enter 1234 when prompted
for the passcode.
3 When the phone displays the device name ‘TOYOTA’, select the device.
The phone displays the passcode entry screen.
4 Enter the passcode (1234).
The phone displays “pin verified,” and the system says: Pairing complete. Connection in
progress.
Note:
Some phones ask you to accept the Bluetooth ® link. Enter yes.
Upon successful completion, the system says: Connection is complete. Phone ready
for use.
10 Using your Bluetooth ® hands-free system