You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pullers<br />
Pullers<br />
Heavy Duty Adjustable Wheel Bearing Lock<br />
Nut Wrench<br />
Part No.<br />
AN100<br />
Description<br />
Adjustable jaws with lock fitting suitable<br />
for both hexagon and octagon wheel<br />
bearing lock nuts.<br />
FEATURES<br />
• Capacity:<br />
6 pt. lock nut: 1 13 ⁄16” (46mm) to 5 1 ⁄16” (128mm).<br />
8 pt. lock nut: 2 3 ⁄8” (60mm) to 5 1 ⁄8” (130mm).<br />
• Three pairs of pins included, diameters:<br />
1⁄4” (6mm), 5 ⁄16” (8mm) and 3 ⁄8” (10mm).<br />
Hexagon Octagon Pin Type<br />
Triangle Separators<br />
Part No. Opening Capacity Weight<br />
P3160 1 1 ⁄16" - 6 1 ⁄4" 5 lbs.<br />
P3210 2" - 8 1 ⁄4" 12 lbs.<br />
10 Ton Capacity, Large Gear and Pulley Puller<br />
Part<br />
No. Screw Size<br />
Spread<br />
Range<br />
Block<br />
Opening<br />
Block<br />
Dimensions Weight<br />
P310 3 ⁄4” -16” x 11 5 ⁄8” 2” to 7 3 ⁄4” 9⁄16” 8 1 ⁄4” x 1 3 ⁄8” x1” 4.4 lbs.<br />
• To be used with 3 ⁄4” dr. breaker bar or ratchet.<br />
• Designed for professional usage.<br />
Timing Gear Puller<br />
Pitman Arm Puller<br />
Bearing Separator<br />
Pulley Pulling Attachment<br />
Part<br />
No. Screw Size<br />
Spread<br />
Range<br />
Block<br />
Opening<br />
Block<br />
Dimensions Weight<br />
P309 3 ⁄8”-16” x13lg 1 1 ⁄2” to 4 1 ⁄4” 7⁄16” 4 7 ⁄8” x 1 3 ⁄16” 1.6 lbs.<br />
Part No. Description Weight<br />
P190 Pulls tie rod ends on front wheel drive cars 2.0 lbs.<br />
Part No. Description Threads Weight<br />
P500 1⁄4” - 15 ⁄16” capacity 5 ⁄16” - 18 0.6 lb.<br />
Part No. Description Threads Weight<br />
P507 1 3 ⁄4” - 5 7 ⁄8” capacity 5⁄8” - 18 4.3 lb.<br />
*Use for servicing crankshaft pulleys & timing gears<br />
Can be used with No. 995, 999A and PO10A<br />
Can be used with No. P312, 1002, PO12, 1004 and PO12L<br />
Pilot Bearing Puller<br />
Harmonic Balancer Puller<br />
Bearing Separator<br />
Part No. Description Threads Weight<br />
P509 1⁄2” - 9” capacity 5⁄8” - 18 12.5 lb.<br />
Can be used with No. 1003, 1006, PO14 and PO17<br />
Bearing Separator<br />
Part No. Description Threads Weight<br />
P501 0” - 2 1 ⁄4” capacity 7⁄16” - 20 1.4 lbs.<br />
Can be used with No. 1001, PO11, 999LA, PO13A or P309<br />
Part No. Description Threads Weight<br />
P503 0” - 4 1 ⁄4” capacity 5⁄8” - 18 5.5 lbs.<br />
Part<br />
No. Description<br />
Jaw<br />
Spread<br />
Centre<br />
Rod<br />
Weight<br />
P498 2-Jaw Slide Hammer 1⁄2” to 1 1 ⁄2” 1⁄2”-13” x 13 lg. 3.6 lbs.<br />
Part No. Description Weight<br />
P200 Span 1 1 ⁄2” to 4 1 ⁄2”, 6 ton 2-Way 2.5 lbs.<br />
Contains 5 sets of side bolts, includes:<br />
2 each: 3 ⁄8” - 16” x 4” 3 each: 3 ⁄8” - 24” x 2”<br />
3 each: 5 ⁄16” - 18” x 2” 3 each: M8 - 1.25” x 80mm<br />
3 each: M10 - 1.50” x 50mm<br />
292<br />
Can be used with No. 1002, PO12, 1004, PO12L<br />
293
Change language