Graco JUNIOR MINI - JUNIOR MINI mode d'emploi

Parts List
Fig. 1.1 5-point safety buckle Fig. 2.1
Fig. 1.2 Harness adjuster
Fig. 2.2
Fig. 1.3 Angle adjustment button
Fig. 1.4 Secondary latch
Fig. 2.3
Fig. 1.5 Top bar juncture
Fig. 2.4
Fig. 1.6 Rear facing seat belt hook Fig. 2.5
Fig. 1.7 Body
Fig. 2.6
Fig. 1.8 Protective shoulder straps Fig. 2.7
Fig. 3
Reclining Adjustment
Rear facing seat belt
Lock-off latch for forward
facing mode
Front belt cover
Base
Rear cover
Instruction manual
Harness height adjuster
button
Anti-slippery pad
16
After adjustment, please move the car seat back and forth to make sure if
the car seat is securely fastened to the vehicle seat.
Forward Facing Mode (for child between 9~18kg)
There are four reclining angles 1~ 4 (Fig. 5). Simply press the angle adjustment
button to adjust the car seat angles (Fig. 4) – Push up.
Rear Facing Mode (for child under 13kg)
Press the secondary latch first and then the reclining adjustment button (Fig. 6).
Car seat installed in this mode MUST be adjusted to angle 5 (Fig. 5).
Beware of finger entrapment when performing this task.
Shoulder harnesses Height Adjustment
Improper adjustment of shoulder height may throw your child off the car
seat when accident occurs.
Make sure the shoulder height is not too high or too low before installing
this car seat.
1 Open the rear cover located at the seat back (Fig. 7)
2 Move the slide lever up or down by pressing the harness height adjuster
button (Fig. 8). There are four pitches of shoulder height for adjustment.
3 Adjust the shoulder harness to appropriate height of insertion outlet cover
after the height adjustment (Fig. 10).