Graco JUNIOR MINI - JUNIOR MINI mode d'emploi
Graco JUNIOR MINI - JUNIOR MINI mode d'emploi
Graco JUNIOR MINI - JUNIOR MINI mode d'emploi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 The shoulder harness MUST lay across child’s shoulders according to height<br />
(Fig. 9).<br />
The position of shoulder harness MUST be set slightly above child’s shoulders.<br />
Installation to the Vehicle<br />
(Rear Facing Mode, for child under 13 kg)<br />
GB<br />
Note that this <strong>mode</strong> must ONLY be used for child weighing under 13 kg (approximately<br />
1 year old or under) (Fig. 11).<br />
DO NOT install on vehicle seat equipped with safety airbags (Fig. 12).<br />
It is highly recommended to have your car seat installed at the back seats of<br />
your vehicle.<br />
Note that you MUST adjust the car seat to the most reclining angle, or angle<br />
5, in rearfacing Mode. (Turn to page 16 for adjustment details)<br />
Both top bar and inner cushion MUST be installed in rearfacing <strong>mode</strong>.<br />
1 Attach the inner cushions to the seat (including the Head Pad, Seat Pad, and<br />
Protective Crotch Strap)<br />
• Inner cushion is designed to provide extra protection and comfort for infant<br />
under 6 months old .<br />
• Child under 6 months MUST use this car seat with inner cushions<br />
(Fig. 13).<br />
• The inner cushion is removable for washing.<br />
Fig. 13.1 Protective crotch strap<br />
Fig. 13.2 Head pad<br />
Make sure to adjust the shoulder harness to the appropriate height when using<br />
the inner cushions. (Turn to page 16 for adjustment details)<br />
2 Use of top bar (Fig. 14).<br />
Note that the insertion is directional.<br />
Do not use the top bar as a lifting handle.<br />
3 Buckle the vehicle seat belt (Fig.15).<br />
4 Installation of vehicle seat belts (Fig.16).<br />
17