Samsung 23''Série5 Moniteur station d'accueil C23A550 (LC23A550US/EN ) - Manuel de l'utilisateur 4.07 MB, pdf, Anglais
Samsung 23''Série5 Moniteur station d'accueil C23A550 (LC23A550US/EN ) - Manuel de l'utilisateur 4.07 MB, pdf, Anglais
Samsung 23''Série5 Moniteur station d'accueil C23A550 (LC23A550US/EN ) - Manuel de l'utilisateur 4.07 MB, pdf, Anglais
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7<br />
Setup and Reset<br />
7.1.4 USB Super Charging<br />
A source <strong>de</strong>vice's battery can be charged quickly via USB 3.0 port on the product.<br />
• Data transmission is not available if USB Super Charging is on.<br />
• To enable standard charging or data transmission, set USB Super Charging to off.<br />
• The input source does not need to be changed.<br />
Configuring USB Super Charging<br />
1 Press [ m ] on the product.<br />
2 Press [ ] to move to SETUP&RESET, and press [ ] on the product.<br />
3 Press [ ] to move to HUB, and press [ ] on the product.<br />
4 Press [ ] to move to USB Super Charging, and press [ ] on the product. The following screen<br />
will appear.<br />
HUB<br />
USB Connection<br />
Analog<br />
HDMI<br />
USB Super Charging<br />
Disconnected<br />
Disconnected<br />
Disconnected<br />
Off<br />
1 Port<br />
2 Ports<br />
Return<br />
• Off: Disable USB Super Charging.<br />
Move<br />
Enter<br />
• 1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.<br />
Quick battery charging is available only through one USB 3.0 port (it is found on the left si<strong>de</strong><br />
and is the port closest to you when facing the front of the monitor).<br />
• 2 Ports: Enable two USB 3.0 ports for quick battery charging.<br />
5 Press [ ] to move to the option you want, and press [ ] .<br />
6 The selected option will be applied.<br />
7.2 Eco Saving<br />
Adjust the power consumption of the product to save energy.<br />
7.2.1 Configuring Eco Saving<br />
1 Press [ m ] on the product.<br />
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.<br />
7 Setup and Reset<br />
63
Change language