Samsung i8 (EC-I8ZZZBBA/E2 ) - Manuel de l'utilisateur 8.99 MB, pdf, Anglais

Starting the Recording mode
How to use the Program mode
Selecting the automatic mode will configure the camera with optimal
settings and you can manually configure various functions.
1. Select the Program mode by pressing
the M (Mode) button (p.20).
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
Refer to page 37-42 for more
information about the Program mode menus.
How to use the DIS(Digital Image Stabilization) mode
This mode will reduce the effect of camera shake and help you get a
well exposed image in dim conditions.
1. Select the DIS mode by pressing the
M (Mode) button. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
00016
01:00 PM
2008/01/01
00016
01:00 PM
2008/01/01
• Things to watch out for using the DIS mode
– The digital zoom will not operate in the DIS mode.
– If the lighting conditions are brighter than fluorescent lighting conditions,
the DIS will not activate.
– If the lighting conditions are darker than in fluorescent lighting
conditions, camera shake warning indicator ( ) will be displayed. For
best results only take pictures in situations where the camera shake
warning indicator ( ) is not displayed.
– If the subject is moving, the captured image may be blurred.
– Avoid moving the camera while the [Capturing!] message is displayed
to achieve a better result.
– As the DIS uses the camera’s digital signal processor, it may take a
little longer for the camera to process and save the images.
– If the image size is ( ) or ( ) ,the DIS mode can’t be selected.
How to use the FUN mode
In this mode, you can take pictures with various effects easily and
simply.
Select the FUN mode by pressing the
M (Mode) button.
Refer to page 46-52 for more
information.
00016
01:00 PM
2008/01/01
021