Brother PJ-723 - Manuel des modèles P-touch/ Référence des commandes

P-touch Template Command Reference
6. Control Code Lists
6.1 Setting and retrieving commands for P-touch Template mode
ASCII Code Binary Code Static/Dynamic Description
^PT 5E 50 54 Dynamic Select print start trigger
^FF 5E 46 46 Start printing
^PS 5E 50 53 Dynamic Specify print start command text string
^PC 5E 50 43 Dynamic Specify print start received character count
^SS 5E 53 53 Dynamic Specify delimiter
^TS 5E 54 53 Dynamic Select template
^LS 5E 4C 53 Dynamic Specify line spacing with line feed
^CC 5E 43 43 Dynamic Change prefix character
^RC 5E 52 43 Dynamic Specify line feed command text string
^CN 5E 43 4E Dynamic Specify number of copies
^QV 5E 51 56 Dynamic Specify QR Code version
^FC 5E 46 43 Dynamic FNC1 replacement setting
^II 5E 49 49 Initialize
^OP 5E 4F 50 Perform printer operation (feed)
^SR 5E 53 52 Status request
^VR 5E 56 52 Retrieve version information
^CR 5E 43 52 Line feed in object
^OS 5E 4F 53 Select object (object number)
^ON 5E 4F 4E Select object (object name)
^DI 5E 44 49 Direct insert object
ESC ia 1B 69 61 Dynamic Select command mode
Note
* The commands listed above must be used in P-touch Template mode.
* These commands (except ESC ia) cannot be used in ESC/P Legacy / Raster mode or ESC/P
Brother mode.
* With dynamic commands, settings specified with a command are temporarily saved and applied
until the printer is turned off.
- 31 -
6. Control Code Lists