Brother QL-720NW - Manuel des modèles P-touch/ Référence des commandes
Brother QL-720NW - Manuel des modèles P-touch/ Référence des commandes
Brother QL-720NW - Manuel des modèles P-touch/ Référence des commandes
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
P-<strong>touch</strong> Template Command Refe<strong>rence</strong><br />
^RC<br />
Specify line feed command text string<br />
ASCII: ^ R C n1 n2 data<br />
Decimal: 94 82 67 n1 n2 data<br />
Hexadecimal: 5E 52 43 n1 n2 data<br />
Parameters<br />
0≤n1≤2<br />
0≤n2≤9<br />
00h≤data≤FFh<br />
Description<br />
• Specifies the text string for the line feed command.<br />
(n1*10)+n2: Length of the text string (can be set between 1 and 20)<br />
data: Text string (The maximum number of characters that can be set is 20 characters (bytes).)<br />
• The default text string for the line feed command is “^CR”.<br />
• This command is a dynamic command.<br />
Remarks<br />
• Invalid if more than 20 characters have been specified<br />
Example<br />
• To change the text string for the line feed command to “0Dh 0Ah”:<br />
Since the text string to be specified (data) contains 2 characters, n1=0 and n2=2. Therefore, the<br />
command will be as follows.<br />
^ R C 0 2 0Dh 0Ah<br />
(5Eh 52h 43h 30h 32h 0Dh 0Ah)<br />
- 35 -<br />
7. Control Command Details