FR - Mode d’emploi - LaBina One
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Using the pigmentation device for the first time<br />
Turning on the device<br />
Figure:<br />
Back of the control unit<br />
w Start the control unit by pressing the green On / Off key. The front panel lights<br />
up.<br />
w Turn off the control unit by pressing the greenOn / Off key again.<br />
NOTE: Protect the pigmentation device from excessive<br />
voltage Disconnect the control unit and mains adapter from the<br />
power supply, when it is not needed.<br />
Keys<br />
Always start the handpiece with the needle<br />
cartridge inserted to prevent damage to the<br />
handpiece.<br />
Speed keys<br />
Start key<br />
Start the handpiece<br />
Pause key<br />
Handpiece paused<br />
Minus key<br />
Reduce stroke speed<br />
Plus key<br />
Increase stroke speed<br />
120<br />
If the pigmentation device is not required for a long time, it is recommend that you<br />
disconnect the control unit’s mains adapter from the power supply.<br />
Display dimming in standby mode<br />
To extend the display life and comply with the energy saving guidelines, the device<br />
has a screen saver and an automatic<br />
standby function.<br />
The screen saver dims the screen after 10 minutes of no button being pressed<br />
or handpiece being used. The automatic standby function takes effect after 60<br />
minutes of no button being pressed or handpiece being used. To restart the control<br />
unit, press the On / Off key on the back.<br />
Date and time<br />
11:06<br />
04.05.2023<br />
11:06<br />
04.05.2023<br />
<strong>LaBina</strong> ® <strong>One</strong><br />
w Pressing the Start key starts the selected handpiece and needle stroke. The<br />
needle in the needle cartridge moves at the stroke speed shown on the display.<br />
The Start key icon automatically changes to a pause icon.<br />
w Pressing the Pause keystops the handpiece and the needle stops moving in the<br />
needle cartridge. The Pause key icon changes back to the Start icon.<br />
w The desired working speed can be set by pressing the Minus key and Plus key.<br />
10