FR - Mode d’emploi - LaBina One
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Timer<br />
Opening the timer menu<br />
Pressing the Alarm key opens the<br />
timer feature.<br />
The default display for the timer is the<br />
last selected timer time.<br />
Setting the timer time<br />
Pressing the Timer key again<br />
changes the display to the timer time<br />
setting feature.<br />
00:30,00<br />
00:30,00<br />
Starting the timer<br />
Pressing the Start key starts the time<br />
display running backwards from the<br />
defined time.<br />
Pausing the timer<br />
Pressing the Pause key pauses the<br />
time display.<br />
Restarting the timer<br />
By pressing the Start key again<br />
the time display continues running<br />
backwards.<br />
01:30,00<br />
01:29,57<br />
01:29,56<br />
Use the Left and Right keys to<br />
select the digit to be changed.<br />
The underscore acts as the cursor<br />
and moves to the selected position<br />
with each tap of the key.<br />
00:30,00<br />
End of the timer<br />
Just before the timer ends, the control<br />
unit issues a beep in the last three<br />
seconds.<br />
Use the Up and Down keys to<br />
change the values at the cursor<br />
position.<br />
Once the timer has expired, the time<br />
display jumps back to the last stored<br />
value.<br />
01:30,00<br />
Press the Confirm key to accept<br />
the set values.<br />
01:30,00<br />
01:30,00<br />
NOTE: Using the timer<br />
The timer can be used to measure the anaesthetic exposure time.<br />
12