UGI 4462 / UGI 45N - Ugitech
UGI 4462 / UGI 45N - Ugitech
UGI 4462 / UGI 45N - Ugitech
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>UGI</strong>PLEX<br />
Acciaio inossidabile<br />
Duplex<br />
<strong>UGI</strong> <strong>4462</strong> / <strong>UGI</strong> <strong>45N</strong><br />
C ≤0.03 • Si ≤1 • Mn ≤ 2 • Ni 5-6 • Cr 22-23 • Mo 2.5-3.5 • N 0.11-0.20 • P ≤0.035 • S ≤0.01<br />
Conformità alle norme<br />
EN 1.<strong>4462</strong> (X2CrNiMo22-5-3), ASTM A182-F51, ASTM A182-F60<br />
UNS S32205, UNS31803, SIS2377, SUS329J3L, certificazione Norsok.<br />
Proprietà fisiche<br />
Densità 7.8<br />
Calore specifico 450 J.Kg -1 .°C -1<br />
Conduttività termica 16 W.m -1 ;°C -1<br />
Coeff. di dilatazione termica, 20-300°C 14 μm.m -1 .°C -1<br />
Resistività elettrica 70 μΩ.cm<br />
Modulo di Young 200 GPa<br />
Coefficiente di Poisson 0.333<br />
Proprietà Meccaniche: (Valori tipici a temperatura ambiente, allo stato ipertemprato)<br />
Prova di trazione<br />
YS 0.2% (Mpa) UTS (Mpa) El (%)<br />
Ricotto Solubilizzato 550 660-860 25<br />
Ricotto Solubilizzato<br />
e Trafilato<br />
Resilienza<br />
650 850-1050 25<br />
Temperatura (°C) Temperatura ambiente -50<br />
KV (Joules) 300 140<br />
Disponibile con:<br />
PREN ≥ 33 o PREN ≥ 35
Forgia<br />
> Riscaldamento lento fino a 1200°C<br />
D7910 -<br />
> Fucinatura tra 1200°C e 900°C<br />
><br />
03/09 -<br />
Raffreddamento rapido (> 100°C/s)<br />
Lavorazione<br />
contrattuale non<br />
> Tornitura: Avanzamento se possibile superiore a 0,25 mm. Utensili in carburo SNMG120408 raccomandati<br />
per ottenere una frammentazione dei trucioli ottimale. I valori Vb sono tipicamente di 200m/min.<br />
15-0,15<br />
documento -<br />
> Foratura: Si raccomanda una lubrificazione ad alta pressione ed<br />
<strong>Ugitech</strong> :<br />
è consigliato l'uso di utensili in carburo rivestito.<br />
photos<br />
Saldatura<br />
Crédit -<br />
Non è necessario un preriscaldamento<br />
Il metallo d'apporto raccomandato per la saldatura ad arco è l'SMA<strong>45N</strong> di <strong>Ugitech</strong><br />
(conforme a: EN 12072: 22.9.3NL, AWS-SFA5.9: ER2209 e BS2901 Part. 2: 22.8.3 S92)<br />
www.thuria.com - Titoulet &<br />
Disponibile sotto forma di<br />
Dumas :<br />
Barre, Billette, Vergelle, Filo trafilato, Filo per saldatura (SMA<strong>45N</strong>)<br />
Per ulteriori informazioni, siete pregati di consultarci. Imprimeurs<br />
Specifiche<br />
<strong>UGI</strong>TECH<br />
Avenue Paul Girod<br />
73403 <strong>UGI</strong>NE Cedex<br />
FRANCIA<br />
Tel. +33 (0)4 79 89 30 30<br />
Fax: +33 (0)4 79 89 34 34<br />
IT_Fiche format A4 recto verso adresse au verso<br />
<strong>UGI</strong> <strong>4462</strong> / <strong>UGI</strong> <strong>45N</strong><br />
www.ugitech.com<br />
28