ACCUFRESH 5 plus - Ansmann
ACCUFRESH 5 plus - Ansmann
ACCUFRESH 5 plus - Ansmann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
GB OPERATING INSTRUCTIONS <strong>ACCUFRESH</strong> 5 MOBIL<br />
USE OF THE CHARGER<br />
Charger / Discharger for 1-4 nickel/cadmium and nickel/metal-hydride rechargeable batteries size Micro<br />
(AAA), Mignon (AA), BABY (C), MONO (D) and a 9 Volt block NiCd/NiMH.<br />
DISPLAY<br />
LED green on (1): Charging of cylindrical cells.<br />
LED green flashes: Trickle charging of cylindrical cells.<br />
LED red on (2): Charging of 9 Volt block.<br />
LED yellow on (3): Discharging of cylindrical cells.<br />
Slide-switch (NiCd/NiMH) (4): Choose position NiCd or NiMH, according to the cells inserted in<br />
the charger.<br />
Discharge button (5): Push this button to start the discharging process of the cylindrical cells. (The 9 V<br />
block will not be discharged.)<br />
ATTENTION<br />
This charger is designed for charging of rechargeable nickel/cadmium and nickel/metal-hydride<br />
batteries. Do not insert other types of batteries. Danger of explosion!<br />
ENVIRONMENTAL REFERENCE<br />
By using rechargeable batteries and ANSMANN chargers you conserve the environment and safe money<br />
by doing so. Rechargeable batteries are not to be disposed in domestic waste. Give used batteries back<br />
to your dealer or rather to the battery collecting point.<br />
CAUTION<br />
Keep your charger in a dry place (indoor use only). Danger of fire and electric shock! Damaged<br />
power cables are to be taken to authorized dealers.<br />
COMMISSIONING<br />
Plug the power plug into a convenient mains socket (cf. identification plate) and place the batteries into the<br />
battery mounting adapter on the charger. The charger will then start up automatically.<br />
Insertion of the cylindrical cells :<br />
Push the contact bow (6) to the right. Insert the battery/ies up to the bottom of the charging box (shaped<br />
like a V). (Always insert batteries with correct direction of poles according to the symbols in the charging<br />
box!). The charging time for NiCd cylindrical cells is approx. 8h and 16 h for NiMH cylindrical cells<br />
(if the slide switch is adjusted to the right position). (Further details cf. table of charging times ). After<br />
termination of the charging process automatic switch over to trickle charging is made. The cells can stay<br />
in the charger unrestrictedly, with full capacity and without danger of overcharging. Before charging<br />
a defined predischarge of the cylindrical cells can be started via the discharge button (PRESS). Thus<br />
the feared memory effect (capacity loss) is avoided. After discharge, the fast charging process starts
Change language