Samsung NF310 A01 - User Manual (XP/Windows7)_17.5 MB, pdf, ENGLISH
Samsung NF310 A01 - User Manual (XP/Windows7)_17.5 MB, pdf, ENGLISH
Samsung NF310 A01 - User Manual (XP/Windows7)_17.5 MB, pdf, ENGLISH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Upgrading Memory<br />
Chapter 3<br />
Settings and Upgrade<br />
80<br />
A memory is installed in the memory slot at the bottom of this<br />
computer. The procedures to replace the memory are described<br />
below.<br />
• Replace new memory only after shutting the computer<br />
down completely. Do not replace memory when the<br />
computer is in Sleep mode. Disconnect main power plug<br />
and remove the battery before continuing.<br />
• The images used for the illustration are of a representative<br />
model, therefore the images may differ from the the actual<br />
product.<br />
• You must use only memory modules with the specifications<br />
(DDR2 or DDR3) printed on the memory slot that appears<br />
when you open the memory compartment cover at the<br />
bottom.<br />
Replacing the Memory<br />
1<br />
2<br />
Remove the screw on the memory compartment cover at the<br />
bottom of the computer using a screw driver.<br />
Fixing Screw<br />
Pull the memory module latches outward. The memory<br />
module will pop up.<br />
Remove the memory module out at an angle of 30 degrees.<br />
e.g) in the case of using DDR2
Change language