Your Poolcare Solution Instruction Manual La solution ... - Poolmaid
Your Poolcare Solution Instruction Manual La solution ... - Poolmaid
Your Poolcare Solution Instruction Manual La solution ... - Poolmaid
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10.<br />
power supply controller.<br />
STEP 1<br />
a.<br />
b.<br />
STEP 2<br />
Use mounting brackets<br />
provided to fix power<br />
supply controller in upright<br />
position.<br />
The power supply<br />
controller and transformer<br />
should always be installed<br />
in a sheltered position ie.<br />
filter housing etc. Must be<br />
away from possible water<br />
splashing e.g. pump lid or<br />
other sources. Never lay<br />
power supply controller or<br />
the transformer flat on the<br />
ground.<br />
* It is recommended that<br />
a registered electrician<br />
CONNECTS the transformer.<br />
Connect the 12/18 Volt cable to<br />
the 12/18 Volt transformer supplied<br />
with chlorinator.<br />
a. Ensure that transformer<br />
input and output wires face<br />
downward not sideward or<br />
upward. The transformer<br />
must be connected to<br />
a continuous supply<br />
and not be switched via<br />
pump timer (mono units).<br />
Self-cleaning units can<br />
be connected by the<br />
timer<br />
Transformer<br />
1 V/18V<br />
1 V/18V power<br />
supply controller<br />
cable<br />
Pipe Clip held in position<br />
with PVC Cement<br />
Wall or pipe mounting<br />
bracket for Power<br />
Controller<br />
Transformer cover<br />
Power supply<br />
controller<br />
Cell<br />
cable