GU-71-05 Rotational Scrapper - Acuster

Juan de la Cierva, 1; Políg. Ind. del Sud-Oest08960 SANT JUST DESVERN (Barcelona) - SPAINTel. (+34)93 470 30 70 - Fax (+34)93 473 00 77E-m ail: info@ grupoacuster.comUSER’S GUIDEMANUAL ROTATIONAL SCRAPER FOR PE PIPESRANGE: from 63* mm up to 200 mmDescription:The manual rotational scraper 63*-200 (Part number 171375) is designed exclusively for the easyscrape of external surface pipe ends manufactured in plastic resin of polyethylene (PE),polypropylene (PP), etc. This operation must be done as preliminary preparation before carry outan electrofusion joint. The aim is to remove the oxidate skin of the area to be fused.* for SDR 17 or higher on 63 mm pipes.Components:1 Handle2 Expander rod3 Expander lock lever4 Adjusting diameter knob5 Expander shear grips6 Blade7 Quick adjusting feeding deviceWeights and dimensions:Transport casing (exterior dimensions):Weight (scraper / with transport casing):430x370x140 mm2.050 Kg / 3.300 KgHandling and maintenance:Like any tool, the scraper should be used carefully and always keep it in optimum state ofcleanliness and maintenance. It requires no specific maintenance: just keep it clean, provide agood treatment on the use and have it stored in the carrying case if not used.Be careful with the blade: sharp edges, avoid touching it with your hand !.Spare parts:The only component susceptible to be replaced by wear and tear is the blade (6). For othercomponents, consult.Edition: June 2013Revision: No. 1Page 1 of 2Publication: GU-71-05EN