£ Cost versus £’s benefit

£ Cost versus £’s benefit
RABΞScreen Air intake screens, when purchased from RAB Specialist Engineers, are a truly
cost effective solution to airborne debris. Why do we say that?
It is because the RABΞScreen air intake screen, manufactured in Chicago and fitted by one of
our distributor installers (or your own engineers) is not expensive.
In a recent example, a screen for a 9m 2 opening cost less than £100.00 per m 2 .
If you compare that to 25mm thick filter media at £20.00 per m 2 you might think that it is quite
expensive.
However, what you don’t get with a RABΞScreen air intake screen is:
Standard Media
Replacement every 4-6 weeks
Disposal of the dirty media every 4-6 weeks
Cutting and fitting new media every 4-6 weeks
Purchasing and storage of replacement rolls of media.
The RABΞScreen filter is cleanable and will last for 10 years or more so that you do not need to
do any of the above.
Magnetic air intake
screen
This is because the RABΞScreen air intake screen is manufactured from high abrasion polymer
coated, polyester mesh which can be easily cleaned in position using a vacuum cleaner, brush
or hose.
What’s more, the RABΞScreen improves airflow and increases particle capture so, not only do you
have a more efficient filtration system, you can also reduce the speed of your fans to improve
energy efficiency.
Why buy a short term solution when you can fit an air intake screen.
Guaranteed for 10 years
Reduce your filter costs by up to 60%
Increase airflow and save energy at the same time.
. RABΞScreens for air intake protecon
in all systems