gerät Bedienungs- anleitung - Rothenberger Industrial

More documents

Recommendations

Info

30957E_Anleitung 16.10.2009 8:21 Uhr Seite 8 GB IGNITING AND ADJUSTING THE TORCH: 1. Connect the propane regulator to the gas bottle. Ensure that the connection is tight. 2. Then connect the recommended safety valve and only then connect the gas hose to the safety valve and the propane handle. Again ensure the connections are tight. 3. Open the bottle cut-off valve first. 4. Then open the control valve on the tool (large control knob with +/- symbol). When using small torches or freshly refilled gas bottles, allow the captured air to escape. 5. Ignite flame on lower edge of the torch nozzle. 6. Increase gas flow with the integrated valve for full output. Ensure that the flame aspect does not burn away from the nozzle edge as it will reduce output and temperature. 7. Retention flame persists until the gas throttle is actuated. By pressing the economizer lever the torch gains full capacity as previously set. 8. For short work interruptions release economizer lever and the tool reduces the flow of gas and the retention flame returns. It is essential that the torch holder is mounted in full accordance with the assembly diagram. 9. Avoid torsional stress of the hose. FEATURES 1 Torch 2 Pipe 3 5.0 m hose, R3/8’’ threaded connection on both sides 4 Safety economizer valve – handle 5 Torch holder 6 Economizer lever 7 Control valve for regulating flame size 8 Safety valve (accessory) 9 Propane regulator (accessory) WORK COMPLETION – SHUTTING OFF THE TORCH Always close the torch valve. Reduce hose pressure to normal atmospheric pressure. Before taking prolonged breaks or after work completion, close bottle valves and allow the torch to burn off any excess gas. Then close gas regulator and allow hot parts to cool. Wait until parts and components have fully cooled before disassembling and stowing gas equipment. STORAGE AND TRANSPORT CONDITIONS Before taking prolonged breaks or transporting equipment, always disconnect the hose from the vessel. Always transport gas vessels in an upright position. Warning: Compressed gas cylinders (and single-use oxygen bottles) are non-refillable vessels. Refilling is prohibited by law and any attempt poses an urgent safety hazard. Have refillable vessels filled by authorized, qualified stations. Improper refilling and handling can lead to serious accidents. 8
30957E_Anleitung 16.10.2009 8:21 Uhr Seite 9 RECYCLING Worn out machines must be recycled at a suitable recycling facility. Do not dispose of in the household waste. Further information is available from your local council. 9 GB
Page 1 and 2: 30957E_Anleitung 16.10.2009 8:21 Uh
Page 7: 30957E_Anleitung 16.10.2009 8:21 Uh
Page 59 and 60:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 61 and 62:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 63 and 64:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 65 and 66:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 67 and 68:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 69 and 70:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 71 and 72:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 73 and 74:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 75 and 76:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 77 and 78:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 79 and 80:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 81 and 82:
30957E_Anleitung 16.10.2009 8:21 Uh
Page 83 and 84:
30957E_Anleitung 16.10.2009 8:21 Uh
show all

gerät Bedienungs- anleitung - Rothenberger Industrial

Create successful ePaper yourself

Delete template?

Save as template?