easy cleaning tm - Franke PIM - Login

EASY CLEANING TM
Before carrying out Maintenance on the
EASY CLEANING Suction Unit:
• Disconnect the hood by switching off the
twopole switch on the mains power supply
line, or by switching off the main power
switch.
• Remove the grease filters from the hood.
• If the hood is of the recirculation type, remove
the odour filters:
• For hoods with a flat cartridge (A): turn the
fastening elements provided;
• For hoods with a bayonet cartridge (B):
turn as indicated and extract.
EN
Removing the Grease Filters
Disconnecting the EASY CLEANING Suction Unit
• Disconnect the power connector Ca and the
control and lighting connector Cmd on the
sides of the unit.
• For wall-mounted hoods and free-standing
hoods with square chimney, turn the levers
Lb locking the suction unit, so that they
disconnect from the pins.
• For free-standing hoods with round chimney,
unscrew the plugs Vb locking the suction
unit.
• Pull the suction unit forwards so that it unhooks
from the support pins, and remove it
downwards through the air outlet.
A
Ca
Lb
Cmd
Vb
B
1
11