easy cleaning tm - Franke PIM - Login

More documents

Recommendations

Info

Hood body installation • Before hooking the hood body it is necessary to tighten 2 Vr screws placed in the fixing points of the body. • Hook the hood body on the 12a screws. • Tighten completely 12a support screws. • The correct hood body position can be levelled with Vr screws. • Fix the hood definitively by tightening the 12a security screw. Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is left to the installer. • To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet. • Fix the pipe in position using sufficient pipe clamps (not supplied). • Remove possible charcoal filters. EN RECIRCULATION VERSION AIR OUTLET • Insert the connection extension pieces laterally 14.1 in connection 15. • Insert the Connector 15 into the Support bracket 7.3 and fix it with a screw. • Make sure that the outlet of the extension pieces 14.1 is horizontally and vertically aligned with the chimney outlets. • Connect the air outlet connection 15 to the hood body outlet using either a flexible or rigid pipe ø 150 mm, the choice of which is left to the installer. • Ensure that the activated charcoal filters have been inserted. 7.3 15 12a ø 150 9 Vr 14.1 ø 150 ø 120 6
ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan. EN Flue assembly Upper exhaust flue • Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1, making sure that they are well seated. • Secure the sides to the brackets by using the 4 screws 12c (2,9 x 9,5) supplied. • Make sure that the outlet of the extensions pieces is aligned with the chimney outlets. Lower exhaust flue • Slightly widen the two sides of the flue and hook them between the upper flue and the wall, making sure that they are well seated. • Fix the lower part laterally to the hood body by using the 2 screws 12c (2,9 x 9,5) supplied. 2 2.1 2.2 7.2.1 12c 12c 12c 7
Page 1 and 2: GB DK SE NO FI Instructions for use
Page 3 and 4: RECOMMENDATIONS AND SUGGESTIONS The
Page 5: INSTALLATION EN Wall drilling and b
Page 9 and 10: MAINTENANCE EN Cleaning the Comfort
Page 11 and 12: EASY CLEANING TM Before carrying ou
Page 13 and 14: REASSEMBLY N.B. To avoid reassembli
Page 15 and 16: APPARATBESKRIVELSE DK Dimensioner K
Page 17 and 18: Montering af emhætte • Inden man
Page 19 and 20: BRUG DK T1 T2 T3 L Betjeningspanel
Page 21 and 22: DK Lugtfilter (Filtrerende version)
Page 23 and 24: • Sideristene, der beskytter roto
Page 25 and 26: REKOMMENDATIONER OCH TIPS Denna bru
Page 27 and 28: INSTALLATION SE Montering av väggf
Page 29 and 30: ELEKTRISK ANSLUTNING • Anslut fl
Page 31 and 32: UNDERHÅLL SE Rengöring av Confort
Page 33 and 34: EASY CLEANING TM Innan du påbörja
Page 35 and 36: ÅTERMONTERING N.B. För att undvik
Page 37 and 38: EGENSKAPER NO Dimensjoner Deler Ref
Page 39 and 40: Montering av kjøkkenviftens hovedd
Page 41 and 42: BRUK NO T1 T2 T3 L Kontrollpanel KN
Page 43 and 44: NO Aktivt kullfilter (filtreringsve
Page 45 and 46: • For å fjerne beskyttelseristen
Page 47 and 48: OHJEET JA SUOSITUKSET Nämä käytt
Page 49 and 50: ASENNUS FI Seinän poraus ja tukien
Page 51 and 52: SÄHKÖLIITÄNTÄ • Liitä liesit
Page 53 and 54: HUOLTO FI Confort Panel -osien puhd
Page 55 and 56: EASY CLEANING TM Ennen EASY CLEANIN
Page 57:
KOKOAMINEN Huom. Puhaltimet on varu
show all

easy cleaning tm - Franke PIM - Login

Create successful ePaper yourself

Delete template?

Save as template?