Technical Data - Sicis

- Insert the fluorescent light bulb in the lamp socket (insert it in the lamp socket and rotate until it locks, holdingit from the plastic side. Use only light bulb respecting model and power rating indicated on the product;- Lift the covering canopy, and act with an oscillatory movement in order to put the lamp mount on thesphere; fasten it, intersecting first two fins, and then the others two;- Now that the four fins are inside the sphere, control that the two pivots on the lamp mount, fit together withthe holes on the sphere (see drawing). Fasten the sphere on the mount using the proper screws;- Bring down the covering canopy and fasten it tightening the screw on the tube;- Connect again the power.REPLACING THE LIGHT BULB- Verify the compliance with the SAFETY NOTES (see box above);- Lift the metal covering canopy unscrewing the lock screw;- Lift the sphere with an oscillatory movement, taking off first two pins, and than the others two;- Elicit the light bulb from the lamp socket, holding it from the plastic side, rotating and pulling it with amovement perpendicular to the lamp socket;- Substitute the bulb with another fluorescent bulb of the same watt power. To connect it, insert the bulb in thelamp socket and rotate until it locks, holding it from the plastic side;- Mount again the sphere: lift the covering canopy, and act with an oscillatory movement in order to put thelamp mount on the sphere; fasten it, intersecting first two fins, and then the others two;- Now that the four fins are inside the sphere, control that the two pivots on the lamp mount, fit together withthe holes on the sphere (see drawing). Fasten the sphere on the mount using the proper screws;- Bring down the covering canopy and fasten it tightening the screw on the tube;- Connect again the power.CAUTIONS- Respect the model and the Watt nominal power of the lamp as indicated on the appliance;- Do not cover the lamp (for instance with cloth, foulards, a.s.o.);- Use the lamp only in the expected position;- Switch off the power of the electrical system before carrying out any work on the lamp (for example toreplace the light bulb) or before cleaning it;- To clean the lamp use only a soft, damp cloth;- For your safety do not modify the lamp;- If you should need to replace the electrical wire (for example if it should be damaged), it’s necessary to askfor assistance, where you bought the lamp, or to a professional, in order to maintain the original arrangementof the lamp;- The information contained on this instructions, could be integrated or modified from our company withoutadvance warning;- Our company guarantees the respect of its products to the European laws in force concerning security andEMC;- We accept no liability for any damages to the product, goods and/or people, because of incorrectinstallation and/or changes made to the lamp using equipments and/or electrical/electronic components notsuitable;- The total or partial reproduction of the information contained in this instructions is strictly forbidden.APPLIANCE DISPOSAL – WEEE- At the end of its life, this product complies with the EU directive 2002/96/EC - WEEE (Waste Electrical andElectronic Equipment). Do not dispose of this product as unsorted municipal waste. Please be environmentallyresponsible and recycle this product through your recycling facility.To know the location of public areas of collection, please contact the institution for the collection of waste, askthe seller, or deposit it in the suitable containers (where provided). Also the seller may withdraw your oldappliance.SICIS SrlVia Canala, 8548123 RAVENNA (RA) – ITALY