www.SamsungSystemAC.com

SUBMITTALMCU-4EAEVDVM Plus III Heat Recovery Mode Change UnitPage 1 of 2Job NamePurchaserSubmitted toUnit DesignationLocationEngineerReferenceSchedule#Specifications• Mandatory component for heat recoverysystemsPowerVoltage (ø/V/Hz)Running Current (amps)1/208-230/600.6• Using solenoid valves, the MCU shalldetermine the path of refrigerant to theindoor unit based on the mode of operationCapacityMaximum Btu/hQty. of Connectable Indoor Units< 152,000Up to 4• Allows for simultaneous heating andcooling with Samsung DVM Plus III HeatRecovery condensersPipingConnections(inches)FromOutdoorUnitTo IndoorUnitsLiquid (flare)SuctionHigh Pressure GasLiquid (flare)Suction (flare)1/23/41 1/83/8 X 45/8 X 4• Maximum 4 indoor unit connection• The MCU shall contain ElectronicExpansion Valves for wall mountedevaporators that can be bypassed ifnecessaryUnitDimensionsDrainWidth (inches)Height (inches)Depth (inches)Weight (lbs.)OD 1" , ID 7/8"32 1/87 2/322 13/3257• MCU must be mounted indoors, level,with the pipes running horizontally in andout of unit• MCU produces condensation and must bedrained appropriatelySafety CertificationsRefrigerantTypeETL & ETLcR410AConstruction• Galvanized steel cabinet• The unit shall be operated via a DDC typesignal• Control wiring shall be 16AWG shieldedwireQuietside maintains a policy of ongoing development, specifications are subject to change without notice.www.SamsungSystemAC.comQS-DVM-0211A