SC25 - APG

SC25Technical SpecificationsFeaturesHigh sectionFrequency range with processor (±3 dB)250Hz à 19 kHzSensitivity @1W 1m, f> 500 Hz110 dB SPLMaximum continuous level at 1m, f > 500 Hz137 dB SPLPeak level at 1m, f > 500 Hz141 dB SPLDirectivity 60°H x 20°V (1)Nominal impedance6 ohmsComponentsTransducers6 x 6,5" + 6 x 1" HF coaxial driverCoil diameter 50 mm (2") & 45 mm (1.75")Type of loadIsotop et elliptical hornPowerRecommended amplifierPeakAES (2)Construction and characteristicsCabinet18 mm Finnish birch plywoodCoatingBlack, impact resistant aquarethaneConnectors2 SPEAKON NL4MPRiggingSpecific lyre bracket ETSC25Dimensions (H, W, D)62.2" x 11.3" x 23" (1580 x 286 x 584 mm)Net unit weight154lb (70 kg)1200 W to 2400 / 4 ohms3600 W1200 WOptions and AccessoriesETSC25 (3)Lyre bracket for SC25 speakerINOX03 (4)Stainless steel screws and waterproof treatment cone driverTROPIC04 (5)Full treatment : wooden cabinet, screws and HPREPEINT07 (6)Painting option according to RAL or PENTONE referenceSignal ProcessingThe LPSC25 processor includes in addition to the standard functions, simulation of operating parametersthat allows control of diaphragm displacement, voice coil temperature and amplifier clipping. This processoralso provides selection and phase alignment of the subwoofers.(1) Dispersion is controlled from 500Hz. The anglesgiven here are irrelevant below this frequency.(2) In order to take full benefit of the dynamicperformance, sonic quality and reliability of the speakers,the recommended amplification must at least correspondto the AES rating. Lesser amplification is acceptable forapplications requiring less power (near-field, distributedsystems,...), whilst not being less than half the AESrating. The AES power handling corresponds to a 2hour test using weighted pink noise (peak factor of 6dB)through a frequency range of one decade.(3) ETSC25 is a steel bracket allowing installationof speakers on either wall or ceiling with angleadjustment.(4) Stainless steel screws and waterproofing of speakercones.(5) Tropicalisation includes fiber-glass reinforcedpolyester coating of the cabinet, stainless steel screwsand waterproofing of speaker cones.(6) Paint preparation for the requested color.Printing : October 2010“A five years warranty covers passivefilters, transducers and compressiondrivers. The warranty does not covercosmetic damages and damagesdue to misuse, improper installation,or damages caused by alterations.APG has a comprehensive research and development policy for thecontinual improvement of its products and service.Due to this, new materials, manufacturing methods and technologicalchanges may be introduced without prior notice. As a result, an APGproduct can differ from its published description in certain areas.However, unless otherwise indicated, its characteristics will alwaysequal or better the published specifications.APG FRANCE - 19 bis rue des écoles - Site Valnor ZI Haute - 95500 Le ThillayTel. : +33 (0)1 30 18 92 70 - Fax : +33 (0)1 30 18 92 71 - e.mail : contact@apg.tm.fr - www.apg.tm.fr