Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Innovative Technology For the placement<br />
professional at raimondiarg.com.ar<br />
We have a large stock of machines and tools for the setter Browse our site, find the tool you need, and<br />
get in touch with us<br />
INSTRUCTIVE LARGE FORMATS / cortadora de ceramica<br />
Adhesive preparation and gluing<br />
When preparing the ceramic / porcelain adhesive mix it is important to respect the proportions<br />
recommended by the manufacturer and use a low speed mixer such as IPERBET that will ensure that no<br />
air enters the mixture ensuring proper production of the adhesive. Most mixers work at high speeds<br />
which cause the air to enter the mix and can cause the adhesive not to be sufficiently uniform. If this<br />
happens, the performance of the adhesive may not be the desired one.<br />
Once the adhesive is ready, the spreading trowel will be chosen according to the thickness of the plate.<br />
Always put adhesive on the plate and on the surface where the plate will be placed. It is advisable to<br />
place the trowel of greater number to glue the wall or floor and the one of smaller number for the plate,<br />
in this way the weight to be supported will be reduced at the time of moving the plate. It is important to<br />
keep in mind that the inclined trowels will provide the required design so that the adhesion between the<br />
plate and the folder is total. At the time of applying the adhesive, the same application address must be<br />
respected on the plate and in the folder as this will allow to effectively removing all the air Remainder<br />
between the surfaces to be glued once the plate is placed. It must be taken into account that the<br />
adhesive has a maximum time of exposure to air after which it will lose bonding capacity so this time<br />
should not be exceeded by the operations of gluing and positioning the plate, verify this time with the<br />
manufacturer of the adhesive.<br />
CortadoraPorcelanato, Cortadora electrica porcelanato, San Pietro Sheets, Tools Ceramica, Cortadora<br />
Raimondi<br />
The RLS / RLS 3D leveling system is an innovative system for laying porcelain or ceramic tiles. In addition<br />
to ensuring perfect leveling, it helps accelerate<br />
Ceramic Cutter, The Best Rotary Tools <strong>2018</strong>, and Tools for Large Porcelain Plates, San Pietro Sheets, and<br />
Tools DektonSilestone<br />
Website: http://raimondiarg.com.ar/