Falcon Jan 2011 Pricebook.pdf - Access Hardware Supply

Price Book 2011 

Effective January 31, 2011

For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see the 

Ingersoll Rand Security Technologies BAA/ARRA catalog.

General Terms and Conditions of Sale and Service 

INGERSOLL-RAND COMPANY, SECURITY TECHNOLOGIES SECTOR, 

GENERAL TERMS AND CONDITIONS OF SALE AND SERVICE 

1. GENERAL. (a) This Agreement contains the terms and conditions by which Company will quote 

and sell its Products and Services to Customer. (b) The terms “purchase order” or “order” for the 

purposes of this Agreement include the term “request for quotation,” as appropriate. (c) This 

Agreement supersedes all pre-printed and boilerplate terms and conditions set forth in any purchase 

order issued by Customer. (d) No reference herein to Customer’s purchase order will in any way 

incorporate different or additional terms and conditions which are hereby objected to. 

(e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER 

IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND 

ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. (f) In 

the event of a conflict between this Agreement and a purchase order issued by Customer, the terms of this 

Agreement will prevail. In the event of a conflict between this Agreement and any specific Product or 

Service terms and conditions, the specific Product or Service terms and conditions will prevail. 

2. SCOPE OF PRODUCTS AND SERVICES AND ORDERS. 

(a) Scope of Products and Services. The scope of the Products and Services (including, but not 

limited to location) are (i) attached to this Agreement, (ii) separately furnished by Company to 

Customer, or (iii) subject to Section 1 herein, contained in an order submitted by Customer. 

Non-standard finishes and special items may be available. Contact Company for such availability. 

All Products that come in “kits” cannot be sold as individual pieces. See the specific product terms 

and conditions for exceptions. (b) Orders. All orders submitted by Customer must be in written form 

acceptable to Company. (c) Receipt of an Order. Company will acknowledge receipt of each order 

issued in accordance with this Agreement and will notify Customer whether such order has been 

accepted or rejected, in whole or in part, by Company. If Company fails to acknowledge receipt of an 

order, within a reasonable time period, such failure to acknowledge receipt will be deemed a rejection of 

the entire order. (d) Changes to Orders or Cancellation of Orders. Change order request and 

Cancellations can be by phone, fax, or email. Changes and Cancellations are allowed without penalty if 

made within 48 hours of order receipt if the order has not shipped. Some exceptions do apply - please 

consult the factory. After 48 hours, all changes or cancellations are subject to a charge of 25% of the net 

product or service value plus the cost of any fabrication or raw materials that have been purchased for the 

order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by 

Company that affect the delivery date will be deemed a new order and will require acknowledgement by 

Company as provided in this Section 2. The Customer cannot change or cancel credential orders and 

biometrics orders once they have been placed. If a change or cancel must occur, then the Customer will 

pay a penalty to change credential and biometrics orders. 

3. PRICES AND PAYMENT. (a) Prices. The prices specified by Company are subject to change, 

without notice, to Company’s prices in effect at the time of each shipment of Products or performance of 

Services. Additional charges may be applied for product modification or engineering services. Oral prices 

specified by Company are null and void. (b) Invoices. Company will submit invoices to 

Customer stating amounts due. (c) Payment Terms. Payment terms are 2% cash discount 20 days, net 

35 days from date of invoice. Payment will be made in United States dollars. (d) Credit Terms. All 

orders are subject to Company’s credit limit and terms of credit required by Company or contained in 

Company’s credit application, which is subject to change by Company at any time either before or after 

delivery of any part of the order. Company reserves the right to request payment in advance of shipment 

or any order or to request adequate assurances for Customer’s payment of an order and may withhold or 

stop shipment, without any liability to Company, until Customer submits payment or assurance of 

payment, as required by Company. (e) Default. If Customer is in default in payment or otherwise with 

respect to any order for Products or Services or any other contract with Company, Company shall have 

the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to 

defer further shipments until such default is corrected and to declare all outstanding bills of Customer to 

be immediately due and payable. (f) Taxes. Any taxes, charges, or duties imposed by any governmental 

authority on the sale of Products or Services will be paid by Customer, in addition to the selling price 

specified by Company. (g) Late Payment Charge. A late payment charge of 1.5% per month 

equivalent to 18% per annum will be charged on past due balances owed Company. Provided however, 

that in the event that applicable governmental law sets a maximum rate for late payment fees which is 

less than 18% per annum, then the late payment charge assessed will be set at the maximum rate 

permitted by law. 

4. INSPECTION, DELIVERY, SHIPPING, FREIGHT CHARGES, CLAIMS, AND PACKING. 

(a) Inspection. Inspection of Products and Services will be done by Customer immediately after receipt 

of Products or completion of Services. Inspection of Products or Services by Customer at Company's 

facility is not permitted. (b) Delivery. Product delivery schedules are based upon current production 

capacities, material or component availability, and inventory, and may be changed by Company as 

conditions require. Service delivery schedules are based upon prompt receipt of, and prompt access to, 

Customer’s equipment and all information necessary to complete the Services. In no event will Product 

or Service delivery dates be construed as falling within the meaning of “time is of the essence.” Partial 

delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any 

partial delivery of Products or Services, shall constitute a separate sale and payment shall be separately 

made when due. If any part of the Products or Services are not delivered by Company in accordance with 

Customer’s order, this Agreement shall not be affected thereby. (c) Shipping. Unless otherwise specified 

by Company, (i) where the Customer is located in the United States, all Products will be sold “Uniform 

Commercial Code, F.O.B. Origin, Company's factory”; and (ii) where the Customer is 

located outside of the United States, all Products will be sold “ Ex-works, Company's factory 

(Incoterms 2000).” In either instance, title and risk of loss will pass to Customer upon delivery to the 

carrier at Company's factory. Provided however, a security interest will remain in the Products, 

regardless of mode of attachment to realty or other property, until full payment has been made therefore, 

and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by 

adequately insuring the Products against loss from damage from any cause and to have Company named 

as an additional insured. Copies of all Certificates of Insurance will be provided to Company upon 

request. Customer will also assist Company in providing all necessary documents or signatures 

required to file any documents to perfect Company’s interest in such Products. (d) Freight Charges. The 

full cost of freight, via a carrier of our choice, will be allowed (and prepaid) on shipments of the net 

dollar amount or more indicated in the chart below within the United States of America, excluding 

all territories. 

Brand 

Net Dollar Amount 

Schlage Mechanical $7,000 

Schlage Electronic Security (excluding Biometrics 

and Software & Controllers) $7,000 

Schlage Biometrics 

Schlage Software & Controllers 

Freight Charges Apply 

Freight Charges Apply 

Von Duprin $7,000 

LCN $7,000 

IR FASTRACK $7,000 

Falcon Locks $5,000 

Falcon Exits $5,000 

Falcon Closers $5,000 

Falcon FASTRACK $5,000 

Ives & Glynn-Johnson $1,000 

Steelcraft 

Refer to separate freight terms 

On shipments of the net dollar amount or more to all foreign countries and US territories, freight will be 

allowed (and prepaid) to the Port of Embarkation. Shipments under the net dollar amount will be prepaid 

by Ingersoll Rand and 3.0% of the net invoice amount or $10, whichever is greater, will be added to the 

invoice. All expedited methods of shipment, such as 'next day air', will be prepaid by Ingersoll Rand but 

the entire shipping costs will be added to the invoice. Ingersoll Rand will ship as requested, freight 

collect, if the customer is willing to bear the entire expense and so indicates on the order. Once received 

by IR, a purchase order cannot be combined with another purchase order to qualify for freight allowed. 

In addition the customer may not combine any of the brands or product categories listed above on a 

single purchase order to qualify for freight allowed, except in the case of FASTRACK. IR FASTRACK 

may not be combined with Falcon FASTRACK to qualify for freight allowed. (e) Claims. All claims for 

loss or damage to Products while in the care, custody, and/or control of a carrier will be the responsibility 

of Customer, who will submit any claims. (f) Packing. Company will pack, mark, and ship the Products 

according to its standard procedures for shipment, unless the parties agree, in writing, that Company will 

comply with any special instructions provided by Customer. Compliance with special 

instructions may result in an increased price. 

5. CLAIMS. Claims due to shortages, errors, omissions, damaged goods, or defective material must be 

submitted within 30 days from the date of the invoice. 

6. PRODUCT CHANGES. Company reserves the right to change without notice the design of, or the 

process of manufacturing, the Products covered by this Agreement; provided that the foregoing will not 

be construed as relieving Company from its obligation to deliver Products which conform to the 

specifications which Company may have furnished to Customer. 

7. PRODUCT RETURNS. Purchased material can only be returned to the factory by obtaining Return 

Material Authorization (RMA) and must be returned to Company within 90 days of issuance of the 

RMA. Returned material must be new, unused, non-obsolete, and non-specially manufactured and been 

in Customer’s inventory no more than 180 days from the date of shipment by Company. The RMA 

number, the original invoice number, and the reason for the return must be included in the return. If the 

company approves the return, a credit will be issued to the Customer’s account less freight and a 

handling charge of 35% of the net material on the original invoice. Handling charges may vary 

depending on the condition of the return. The amount of final credit will be determined upon receipt at 

the factory and analyzing the condition of the material. Factory retains the right to deny credit to 

anyone for any reason. 

8. TECHNICAL INFORMATION AND ADVICE. (a) All designs, data, and specifications 

provided by Company are proprietary and will not be disclosed or reused by Customer without the prior 

written consent of Company. (b) Company assumes no obligation or liability for any advice given by 

Company, the results obtained, or damages incurred, and all such advice is given and accepted at 

Customer’s risk. 

9. INTELLECTUAL PROPERTY OWNERSHIP. 

Nothing herein is a grant or license or right under any specific patent or intellectual property asset of 

ither party. With regard to intellectual property ownership, all intellectual property and related 

intellectual property rights (hereinafter “IP”) owned by one party before the date of this Agreement will 

remain owned by that party. All IP conceived, developed, or reduced to practice as part of this 

Agreement after the date and during the term of this Agreement shall be owned by the party creating the 

intellectual property if created by one party without the benefit of the other party’s IP. All IP created 

jointly will be owned by the parties jointly, in direct proportion to monetary contribution. The party 

that has a majority interest shall manage the jointly owned IP. Neither party shall disclose any of the 

other party’s IP to a third party without prior written consent. All intellectual property and related 

documents which are confidential shall remain subject to the terms and conditions of this Agreement 

for twenty (20) years from its effective date, unless such information is made public before this 

time expires. 

10. LIMITED WARRANTY. 

(a) Company's Standard Limited Warranty(ies) relating to Products or Services are applicable to this 

Agreement. The limited warranty(ies) are (i) attached to this Agreement; (ii) separately identified in 

the specific Product Price Book; or (iii) separately furnished by Company to Customer. 

(b) (i) In the event that certain Product warranties are not attached to this Agreement or separately 

furnished, Company warrants only to Customer that Products will be free from defects in material and 

workmanship for a period of 12 months from the date of shipment of the Products. CO-Series locks, 

AD-Series locks, AD-Series Reader Modules, WPR400, WRI400, WSM400 TK400, CT5000, 

PIM400, PIM401, PIB300, and PIB301 will be warranted for a period of 12 months from the date 

of installation, not to exceed 24 months from the date of shipment from the factory. Company’s 

sole obligation under this warranty is limited to repairing or replacing, at its option, the defective 

Products. (ii) The provisions of this limited Product warranty do not apply to Products: (A) used 

for the purposes for which they are not designed or intended; 

11-1/1 

Price Book 108 

Effective January 31, 2011 • Rev. 1/11 

i

General Terms and Conditions of Sale and Service 

(B) which have been repaired or altered without Company's prior written consent; (C) which 

have been subjected to misuse, abuse, negligence, or accident; (D) which have been improperly 

stored, installed, maintained, or operated; (E) which have been used in violation of written 

instructions provided by Company to Customer; (F) which have subjected to improper 

temperature, humidity, or other environmental conditions; (G) which have been affected by 

normal wear and tear; or (H) which, based on Company's examination, do not disclose to 

Company's satisfaction nonconformance to the warranty. 

(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately 

furnished, Company warrants only to Customer that the Services will be free from defects in 

material and workmanship for a period of 6 months from the date of completion of the particular 

items of Service.Company’s sole obligation under this warranty is limited to repairing or replacing, at 

its option, the defective Products. (ii) The provisions of this limited Product warranty do not apply to 

Products: (A) used for the purposes for which they are not designed or intended; (B) which have been 

repaired or altered without Company's prior written consent; (C) which have been subjected to misuse, 

abuse, negligence, or accident; (D) which have been improperly stored, installed, maintained, or 

operated; (E) which have been used in violation of written instructions provided by Company to 

Customer; (F) which have subjected to improper temperature, humidity, or other environmental 

conditions; (G) which have been affected by normal wear and tear; or (H) which, based on Company's 

examination, do not disclose to Company's satisfaction nonconformance to the warranty. 

(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately 

furnished, Company warrants only to Customer that the Services will be free from defects in material 

and workmanship for a period of 6 months from the date of completion of the particular items of 

Service. Company’s sole obligation under this warranty is limited to repairing or reperformance, at its 

option, of the Service; provided however, if repair or reperformance is either impractical or impossible, 

the Company will refund to Customer that portion of the price paid to the Company for the defective 

item of Service. This warranty only applies if the company is given written notice of the defect or 

nonconformance by the Customer within 30 days of discovery. (ii) The provisions of this limited 

Service warranty does not apply to any defects or issues with the design or performance of equipment 

or products not manufactured by Company, nor does it apply to any code compliance or permit 

requirements for the assembly, installation, erection, or construction of any goods. 

(d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO 

THE PRODUCTS OR SERVICES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 

(e) The following costs and expenses are not covered by the provisions of these limited warranties: 

(i) labor costs for the removal and reinstallation of Products or other manufacturer’s products; 

(ii) shipping and freight expenses required to return Products to Company; (iii) normal maintenance; 

and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything 

other than defects in Company’s material (products only) or workmanship. 

11. CUSTOMER'S REMEDIES. THE CUSTOMER'S EXCLUSIVE AND SOLE REMEDY 

ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF PRODUCTS OR 

SERVICES THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO (A) SECURE 

REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR 

REPERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE 

PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT 

WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR 

THE PRODUCTS OR ITEM OF SERVICE. 

12. LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE FOR 

INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES 

INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE 

INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, INTEREST, LOST 

GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY 

REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF 

OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, WHETHER BASED ON 

CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT 

LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF 

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

13. STATUTE OF LIMITATIONS. NO ACTION ARISING OUT OF ANY CLAIMED 

BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER 

MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN. 

14. CONSUMER PRODUCTS. With respect to “consumer products” as defined under the 

Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states do 

not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to 

you. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED 

TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 10 ABOVE. (b) Some 

states do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and you 

may also have other rights which vary from state to state. 

15. FORCE MAJEURE. Any delay or failure of Company to perform its obligations hereunder will 

be excused to the extent that it is caused by an event or occurrence beyond its control such as, by way 

of example and not by way of limitation, acts of God, actions by any governmental authority (whether 

valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, 

explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, but not limited 

to, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inability 

to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery 

date will be extended for a time equal to that of the delay and the schedule for Company’s performance 

will be deemed adjusted in the individual order(s) to that effect. 

16. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with any attachments 

or supplements specifically referenced in this Agreement, constitutes the entire agreement between the 

parties hereto and supersedes all previous communications, representations, or agreements, either oral 

or written, between the parties hereto with respect to the subject matter hereof. No agreement or 

understanding varying or expanding this Agreement will be binding upon either party hereto unless 

it is in writing and signed by a duly authorized representative thereof. 

17. TERMINATION. (a) This Agreement may be terminated by either party by giving 30 days' 

written notice to the other party in the event of failure by such other party to fulfill any of its 

obligations hereunder. However, if during the period of such notice, such other party remedies such 

failure, this Agreement will continue with the same force and effect as if such notice had not been 

given. (b) This Agreement may be terminated upon the written mutual consent of the parties. (c) Either 

party may immediately terminate this Agreement by giving written notice to the other party in the event 

of the happening of any of the following or any other comparable event: (i) insolvency of the other 

party; (ii) filing of a petition in bankruptcy by or against the other party; (iii) appointment of a receiver 

or trustee for the other party; or (iv) execution of an assignment for the benefit of creditors by the other 

party, all of which will allow Company to demand reclamation of all affected orders. (d) Except as 

provided in this section 17, Customer may not terminate this Agreement, in whole or in part, unless 

Company’s prior written consent is obtained and Customer agrees to pay all of Company’s cancellation 

charges. 

18. GOVERNING LAW; VENUE; AND EXPENSES. (a) This Agreement and any disputes or 

controversies arising hereunder will be governed by and construed according to the internal laws of 

the State of Indiana, United States of America, without regard to its conflict of law principles, and not 

including the United Nations Convention on Contracts for the International Sale of Goods. (b) 

Jurisdiction and venue with respect to any action, proceeding, or suit in connection with this Agreement 

will reside in the courts of the State of Indiana. (c) Customer agrees to pay for all expenses (including 

attorney’s fees) incurred by Company in enforcing the obligations of Customer under this Agreement. 

19. COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, AND 

NUCLEAR LIABILITY. (a) This Agreement is subject to, and Company and Customer will 

comply with, all laws and export controls, regulations, rules, orders, licenses, requirements, and 

governmental requests now or hereafter in effect in the United States of America that pertain to the 

Products or the initial sale of the Products or that pertain to Services. Provided however, Company is 

not responsible for obtaining or maintaining any permits for the performance of Services or the 

verification or compliance with any code requirements relative to the performance of Services. To the 

extent any sale of Products or Services pursuant to this Agreement may require approval of the U.S. 

Government, Company’s obligations under this Agreement are conditioned upon the grant of such 

approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in 

connection with such approval. (b) Certain Products are noted by Company as tested by independent 

laboratories for compliance with UL and/or ANSI standards. Any and all modifications or alterations 

to such Products will void such certification, and Company is not liable to Customer to certify any 

modified or altered Product. (c) In the event the Products are to be used in a nuclear facility, the 

Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting 

Company against liability. The Customer hereby releases and agrees to indemnify Company and its 

suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of 

the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. 

20. NO INDUCEMENTS. The parties hereto represent to each other and each agrees that, neither it 

nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give, 

or will give or offer to give, any sum of money or other material consideration to any person, directly or 

indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or 

other governmental permissions to enter into this Agreement or perform obligations hereunder. 

21. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or 

unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that 

provision will be deemed severed to the extent necessary to comply with such statute, regulation, 

ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in 

good faith to arrive at an alternative arrangement approximating the original business objective of the 

parties. The remaining terms and conditions of this Agreement will remain in effect. 

22. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the 

other party of any provision of this Agreement will in no way affect the right to require such 

performance at any time thereafter, nor will the waiver of either party of a breach of any provision of 

this Agreement constitute a waiver of any succeeding breach of the same or any other provision. 

23. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent or legal 

representative of the other party. Neither party is authorized to create any obligation on behalf of the 

other party including, but not limited to, the obligation for payment of any service or warranty 

obligation hereunder. (b) Neither this Agreement nor any right or obligation hereunder may be 

transferred or assigned by either party without the prior written approval of the other party, except that 

Company can transfer or assign this Agreement or any right or obligation (including, but not limited to 

the right to receive payments for any orders) to Ingersoll-Rand Company or an Ingersoll-Rand 

Company entity without first obtaining Customer’s consent. (c) The rights and remedies herein reserved 

to Company will be cumulative and additional to any other or further rights and remedies provided at 

law or equity. (d) Customer does not have the right to setoff or to back charge against any amounts 

which become payable to Company under this Agreement or otherwise. (e) The official text of this 

Agreement is in the English language. If this Agreement is translated into another language, the English 

text will govern any question with respect to interpretation. (f) The headings in this Agreement are for 

convenience of reference only and do not affect the meaning of this Agreement in any manner. 

24. DEFINITIONS. (a) “Agreement” means Ingersoll-Rand Company, Security Technologies Sector 

Terms and Conditions of Sale and Service. (b) “Company” means Ingersoll-Rand Company, Security 

Technologies Sector. (c) “Customer” means the Buyer. (d) “Buyer” means the purchaser of products 

or Services from Company. (e) “U.S.” means United States of America. 

11-1/2 

ii 


Effective January 31, 2011 • Rev. 1/11

Table of Contents 

Alphabetical Index 

B Series Key-in-Lever.................B-1 – B-8 

D Series 

Deadlocks 

100 Series......D100-1 – D200-10 

200 Series......D100-2 – D200-10 

H Series Interconnected ............H-1 – H-6 

MA Series Mortise................MA-1 – MA-14 

RU Series Unit Lock Retrofit..RU-1 – RU-12 

T Series Key-in-Lever................T-1 – T-10 

W Series Key-in-Lever / Knob..W-1 – W-8 

X Series Key-in-Knob.................X-1 – X-8 

Y Series Key-in-Knob/Lever.......Y-1 – Y-6 

Miscellaneous Information.............................................2 

Finishes .............................................................................3 

Freight Weight Chart .......................................................4 

Forms and Examples ......................................................8 

Product Index ........................................................Index-1 

Product Type Index 

Mortise Locksets 

Knob Trim..................................................................MA-5 

Lever Trim....................................................MA-5 – MA-6 

Trim Packages.........................................................MA-14 

Full Body Deadlocks ..............................................MA-15 

Key-in-Lever Locksets 

Grade 1 Cylindrical .......T Series.................................T-3 

Grade 2 Cylindrical .......B Series................................B-3 

Grade 2 Cylinder ...........W Series..............................W-4 

Grade 2 Tubular.............Y Series ................................Y-3 

Key-in-Knob Locksets 

Grade 2 Cylindrical .......W Series..............................W-5 

Grade 1 Cylindrical .......X Series................................X-3 

Grade 2 Tubular.............Y Series ................................Y-3 

Interconnected Locksets 

Grade 2...........................H Series................................H-3 

Retrofit Products 

Unit / Pre-Assembled....RU Series ..........................RU-3 

Deadlocks 

Grade 1 Tubular.............D100 Series ...................D100-3 

Grade 2 Tubular.............D200 Series ...................D200-3 

Auxiliary Products 

Padlocks and Keyed Locking Cables ...................MSC-3 

Mounts ..................................................................MSC-11 

Cabinet Locks .......................................................MSC-10 

Cylinders, Keys and Keying 

Conventional............................................................CYL-2 

Interchangeable Cores............................................CYL-7 

Keys and Key Blanks...............................................CYL-8 

Keying Charges......................................................CYL-10 

Parts and Service Equipment ..............................CYL-13 

Pins and Pin Kits....................................................CYL-16 

Service Equipment & Supplies............................CYL-17 

Construction Core Program .................................CYL-11 

Forms 

Master Keying ................................................................15 



1

Miscellaneous Information 

LOCKS FOR THICK DOORS 

Many Series of Falcon locks are available for doors over 1-3/4" thick. Consult the options section for each series for available door 

thicknesses and charges. 

LEAD-LINING OR LEAD-WRAPPING 

T and RU Series locksets and latchsets are available lead-lined. MA Series locksets are available lead-wrapped. Consult the options 

section for each series for availability and charges. 

ABRASIVE COATING AND KNURLING 

Abrasive coated or knurled knobs or levers are available for most Falcon locksets and latchsets. Consult the options section for each 

series for availability and charges. 

MOUNTED LOCK SAMPLES 

Individual mounted samples are available for all lock series. The samples are mounted on a mount block and are fully operative thus 

allowing demonstration of each functions’ individual features. There is a nominal charge for the mount block. There is no charge for 

mounting of the hardware. See MSC-11 for mount selection. 

SET OF FINISH SAMPLES 

One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain. 

Finishes Included: 605, 606, 613, 625, 626 & 630 Contact your SSC representative for availability 

COMPETITORS’ KEYWAYS 

A selection of standard keyways of other lock manufacturers is available as listed below (6-pin only). Consult options sections of 

each series for availability. (Not available in any mortise and rim cylinders, except Schlage C, or factory master keyed.) 

Furnished 0-Bitted unless otherwise specified. 

Manufacturer Keyway Keying Options 

60 O Bitted, KD 

Corbin Russwin 

L4 

O Bitted, KA4 

Russwin 

D1 

O Bitted, KD 

Sargent LA O Bitted, KD 

C 

O Bitted, KD, KA4 

Schlage 

E 

O Bitted 

Yale 8 (Para) O Bitted, KD 

INTERCHANGEABLE CORES 

The “A” keyway is standard for IC products and will be supplied unless otherwise specified. A, B, C, D, DD, E, F, G, H, J, K, L, M, 

N, Q, R, TB, TD are equivalent to Best and Arrow IC keyways of the same names. Consult IR Mechanical Safety Customer Service 

for restricted keyways not listed here. Conventional cylinders are not compatible with interchangeable core. 

COMPETITORS’ CORES 

Falcon standard IC preps accept Arrow (including Flex-Core), Best (including PKS and Peaks), InstaKey, Kaba Peaks, Keymark and 

KSP cores. Other brands of interchangeable cores are compatible with T and RU Series locksets. See those sections for details. 

CONVENTIONAL CYLINDERS 

The “G” keyway is standard for conventional cylinder products and will be supplied unless otherwise specified. E, H, K, L, N and P 

are also available. Consult IR Mechanical Safety Customer Service for restricted keyways and other keyways not listed here. 

* Interchangeable core not compatible with conventional cylinders 

2 



Schedule of Finishes Ordering Format 

FINISHES 

Although we apply the finest available protective plating and/or enamel coating to the surface of our products, these finishes have 

limitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency of 

use or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. Our 

Company cannot accept responsibility for finish deterioration in these circumstances and therefore the finishes cannot be guaranteed. 

These products will not be refinished or replaced under our warranty should deterioration of finishes occur. 

Some finishes are not suggested for areas that are subject to corrosive climate or chemical conditions. We recommend chrome plated 

or stainless steel finishes for these areas. 

ANSI/BHMA 

Finish 

U.S. Standard 

Code Code Description 

605* 3 Bright Brass - Clear Coated 

606 4 Satin Brass - Clear Coated 

613** 10B Satin Bronze; Dark Oxidized and Oil Rubbed 

625 26 Bright Chromium 

626 26D Satin Chromium 

630 32D Satin Stainless Steel 

* 605 Finish is not recommended for corrosive climates. 

** Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different 

alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil 

rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating. 

Please refer to price columns for each lock series for finish availability. 

HOW TO SPECIFY FINISHES 

STRAIGHT FINISHES: When the finish is to be the same for both sides of the door. 

EXAMPLE: 40 EA. 511HG 626 

SPLIT FINISHES: Finish may vary from one side of the door to the other. 

EXAMPLE: 40 EA. X301TG 606 x 625 (Outside finish is always specified first) 



3

Freight Weight Chart 

Case Avg. Wt. 

Lock Series Functions Trim Quantity per Case 

161 341 501 

511 561 581 18 lbs. 

B 

611 D Q 4 

101 301 17 lbs. 

12 10 14 lbs. 

111 151 33 lbs. 

D100 121 - 20 31 lbs. 

131 43 lbs. 

211 251 30 lbs. 

D200 

221 231 

34 lbs. 

- 20 

261M 

18 lbs. 

271 22 lbs. 

H 

101 451 461 E H 

16 lbs. 

4 

511 D 16 lbs. 

451 521 531 AN DN QN SN 32 lbs. 

541 561 571 

581 851 881 AG DG QG SG 28 lbs. 

371 381 411 AN DN QN SN 37 lbs. 

431 441 AG DG QG SG 33 lbs. 

MA 

AN DN QN SN 

32 lbs. 

101 161 

AG DG QG SG 

28 lbs. 

301 311 321 AN DN QN SN 4 

32 lbs. 

AG DG QG SG 

28 lbs. 

12 

AN DN QN SN 

16 lbs. 

AG DG QG SG 

12 lbs. 

18 

AN DN QN SN 

AG DG QG SG 

16 lbs. 

451 521 531 

541 551 561 571 

HG 

24 lbs. 

581 851 881 HN 25 lbs. 

371 381 411 HG 26 lbs. 

431 441 HN 27 lbs. 

MA 

101 161 

HG 

21 lbs. 

HN 

4 

22 lbs. 

301 311 321 

HG 

23 lbs. 

HN 

24 lbs. 

12 

HG 

10 lbs. 

HN 

11 lbs. 

18 

HG 

20 lbs. 

HN 

21 lbs. 

911 931 21 lbs. 

Mortise 

Deadlocks 

921 - 4 22 lbs. 

941 20 lbs. 

Case Avg. Wt. 

Lock Series Functions Trim Quantity per Case 

501 511 521 

561 571 581 

21 lbs. 

RU 381 411 851 D Q 4 

881 

22 lbs. 

101 301 20 lbs. 

291 351 381 411 

501 511 521 

T 

561 571 581 A D Q 4 20 lbs. 

851 881 

101 301 

12 10 18 lbs. 

501 511 581 36 lbs 

561 

37 lbs. 

W Levers 

10 

101 201 301 D Q 34 lbs. 

161 27 lbs. 

12 24 29 lbs. 

501 511 581 21 lbs 

W Knobs 

561 D Q 10 22 lbs. 

101 301 19 lbs. 

12 24 10 lbs. 

501 511 521 EG HG TG 10 29 lbs. 

561 571 581 EY HY TY 6 19 lbs. 

411 

EG HG TG 10 30 lbs. 

EY HY TY 6 20 lbs. 

X 101 



301 



12 



521 561 581 27 lbs 

Y Levers 

101 161 

12 24 lbs. 

D Q 

301 25 lbs. 

12 20 15 lbs. 

521 561 581 

16 lbs 

10 

Y Knobs 101 161 301 E H 14 lbs. 

12 20 10 lbs. 

1" Shackle 18 lbs. 

Padlocks 2" Shackle - 18 21 lbs. 

6" Shackle 24 lbs. 

985 8 lbs. 

956 986 9 lbs. 

957 987 250 10 lbs. 

Conventional 988 - 20 11 lbs. 

Cylinders 990 13 lbs. 

965 966 973 

974 992 985T 15 lbs. 

986T 

986 987 996 7 lbs. 

261 264 952 

953 976 977 8 lbs. 

Mortise and 997 

Rim Cylinders 988 - 20 9 lbs. 

262 265 10 lbs. 

990 11 lbs. 

992 13 lbs. 

942 943 945 12 lbs. 

Cabinet Locks 959 - 20 13 lbs. 

979 14 lbs. 

Mail Box Lock 982 20 5 lbs 

4 



WHERE TO SEND ORDERS 

Type of Order Fax No. Mailing Address 

Falcon Lock 

888-840-7732 (West) 

Factory 

3899 Hancock Expressway 

888-840-7735 (East) Security, CO 80911 

877-671-7011 

Note 1) Failure to use the above fax numbers or mailing address will delay processing of your order. 

PRODUCT IDENTIFICATION CODING 

Latch Suffix 

D Deadlatch 

S Springlatch 

Cylinder Suffix 

P 6 pin cylinder, keyed to 5 chambers 

L Less cylinder 

B Less SFIC 

BDC Disposable construction core (SFIC)** 

J 

FSIC core prep (competitor’s full-size IC, designate competitor in 

“Additional Details” of Order Form) 

G SFIC (Old Falcon designation = WIC) 

H Construction Core SFIC (brass, keyed) 

BB Best Syle Capped Core (SFIC) 

CP6 Schlage C Keyway 

Trim and Chassis Prefix 

6 Abrasive Lever (6DA = Dane Lever x abrasive strip) 

8 Knurled (8TG = Troy-Gala knob trim x knurled lever or knob) 

9 Lead-Lined (9AV = Avalon lever x lead-lining of levers (and/or chassis) 

Corrosion resistant chassis (XC561 = X corrosion resistant chassis, 

XC 

classroom function)* 

* X Series chassis only. 

** SFIC = Small format interchangeable core 



5

To order Falcon products, descriptive data should be in the same sequence as shown: 

LINE OUTSIDE INSIDE DR ADDITIONAL 

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM DETAILS 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 

1. LINE ITEM: Line item number 

2. QTY: Quantity 

3. PRODUCT: Complete lock product or part number 

4. OUTSIDE DES: Outside design code 

5. OUTSIDE FIN: Outside finish code 

6. INSIDE DES: Inside design code. Leave blank if same as outside design code. 

7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code. 

8. HAND: Hand of door. Only one hand allowed per line item. 

Example: RH = Right Hand, LH = Left Hand, RHR = Right Reverse, LHR = Left Reverse. 

How to Determine Hand of Door 

LHR 

RHR 

9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is 

required. LLL = Less Latch. 

10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. 

LLL = Less Strike. 

11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138 = 1-3/8", 

214 = 2 1/4", 212 = 2 1/2". 

12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified: 

EE = Extended Equally 

EI = Extended Inside 

EO = Extended Outside 

ED = Extended Differently 

EI or EO assumes the latch will be centered on a 1-3/4" door, to which material has been added. 

13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length. 

012 = 1/8" 118 = 1-1/8" 

018 = 3/16" 114 = 1-1/4" 

025 = 1/4" 138 = 1-3/8" 

031 = 5/16" 112 = 1-1/2" 

037 = 3/8" 158 = 1-5/8" 

050 = 1/2" 134 = 1-3/4" 

078 = 7/8" 200 = 2" 

100 = 1" 400 = 4" 

14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements. 

6 



LINE OUTSIDE INSIDE DR ADDITIONAL 

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM DETAILS/KEYING 

Four Y-Series passage locks with a Dane lever in 626. 

1 4 Y101 DAN 626 01-043 01-046 

Ten B-Series storeroom locks with a Dane outside lever in 605 and Dane inside lever in 626, with a 2-3/8 radius face 

latch and full lip radius strike, 6-pin standard cylinder, G keyway. 

2 10 B581PD6 DAN 605 DAN 626 57421 5104-1 

Four T-Series entry office locks with an Avalon lever in 613, standard latch and strike, 5-pin standard cylinder, G keyway 

3 4 T511PD AVA 613 98535 5164 134 

Three T-Series entry office locks with a Quantum lever in 605, abrasive outside lever, standard latch and strike, 

for 2-1/4" thick doors, 6-pin standard cylinder, G keyway, masterkeyed to new system, with 3 keys each. 

Provide 2 masterkeys.* 

4 3 T511PD6 6QU 605 QUA 98535 5164 214 

G Keyway, 

w/3 keys ea. 

5 2 KB578 

G Section, 

Master Key 

6 3 50-215 

Extra cut keys 

Charges 

7 3 50-210 

Master Keying 

Charges 

Two X-Series dormitory locks with a Troy knob and Gala rose in 606, 7-pin SFIC, A keyway, 0-bitted, one 

control key, less strike. 

8 2 X571BD7 TG 606 98535 LLL A - 000000 

9 1 KB609-2 

A Section, 

Control Key 0-bit 

Two M-Series dormitory locks with a Hana knob and Gala rose in 625, right hand, lead-lined, 6-pin SFIC, A keyway, 

construction core, one control key, two change keys. 

10 2 MA571HD6 9HG 625 RH 

A Section, 

11 2 KB632-1 Const. 

Change Key 

12 1 KB609-1 

A Section, 

Const. Ctrl Key 

One M-Series dormitory locks with a Hana knob and Gala rose in 625, left hand reverse, knurled outside knob, 

6-pin SFIC, disposable construction core. 

13 1 MA571BDC 9HG 625 LR 

Five W-Series classroom locks with a Dane lever in 626. Standard latch and strike. 6-pin Schlage C keyway, 

Keyed Different. 

14 5 W561PD6 DAN 626 30-197 30-148 Sch C KD 

*Use Master Keying Schedule form and appropriate Master Key Specification Sheet when ordering. 



7

FORMS & EXAMPLES • 

Sample Letter of Authorization 

For Falcon ® Restricted Products 

DISTRICT 10 

End User 

Letterhead - 

REQUIRED 

District 10 Schools 

555 Main Street 

End User City, State 55555 

(555) 555-5555 

May 1, 2003 

Date - REQUIRED 

To: 

Falcon Dealer 

100 East Avenue 

Dealer City, State 11111 

Dealer Name - 

RECOMMENDED 

RE: District 10, Jones Elementary School 

Facility Name - REQUIRED 

Please consider this authorization to ship product for the above-referenced project. 

Jones Elementary School is to be keyed using a new Falcon Restricted Key System. For security reasons, 

we would like to have all keys for this facility shipped to a location other than the job site. Master keyed 

products, however, can be shipped directly to the site. This letter authorizes Falcon to ship our restricted 

products to the following addresses: 

Master Keyed Products, Construction Keys, Locks Less 

Cylinders, and Locks with Construction Cores 

Attn: Building Project Manager 

District 10 Schools 

555 Main Street 


Master Keys, Change Keys, Control Keys, and Key Blanks 

Attn: Locksmith 

District 10 Lockshop 

1201 Fifth Avenue 


Authorized Ship - 

To Addresses - 

REQUIRED 

These two addresses above serve as our only authorized shipment addresses for all orders placed for our 

facility. We understand that this letter will be kept on file and referenced for our future orders and that a 

new letter is only required to add, remove, or change authorized shipping locations. 

Sincerely, 

End User Representative 

Facilities Manager 

End User 

Representative 

Signature - 

REQUIRED 

Letter may be mailed or faxed to Falcon 

Falcon Restricted Order Processing 


Security, CO 80911 

Fax: (888) 840-7735 

8 



QUOTE# PRICE BOOK: 

SHIPPING INSTRUCTIONS 

Non-Master Keyed 

ORDER 

MARK CARTONS: ACCOUNT NO. P.O. NO DATE 

REQUESTED SHIPDATE 

ORDER WRITTEN BY 

CUSTOMER NAME AND ADDRESS: SHIP TO: 

FOR FURTHER INFORMATION, CONTACT 

Name: 

Phone: 

Fax. 

ADDITIONAL DETAILS 

LINE OUTSIDE INSIDE Use for Key Section and Bitting 

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE EXT DIM Information, KA Groups, etc. 

Page 1 of _______ © 2006 Ingersoll Rand 

FALCON 

Available @ www.falcon.ingersollrand.com


LINE OUTSIDE INSIDE Use for Key Section and Bitting 

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE EXT DIM Information, KA Groups, etc. 

Account No. _______ _____________ P.O. No. ______________________ Page _______ of _______ © 2006 Ingersoll Rand




Master Keyed 

ORDER 

Attach Key System Summary 





Name: 

Phone: 

Fax. 


LINE OUTSIDE INSIDE HAND Use for Key Section and Bitting 

ITEM QTY PRODUCT DES FIN DES FIN (Only LATCH STRIKE EXT DIM Information, KA Groups, etc. 

one 

Key and Label Instructions____________K Hdg Item# Qty Door# hand 

per line Key MK 

(Enter below line item) item) Symbol(s) Symbol(s) 


FALCON 

Available @ www.falcon.ingersollrand.com



ITEM QTY PRODUCT DES FIN DES FIN LATCH STRIKE EXT DIM Information, KA Groups, etc. 

(Only 

one 

hand 

per line 

item) 

Key and Label Instructions____________K Hdg Item# Qty Door# Key MK 

(Enter below line item) Symbol(s) Symbol(s) 

Account No. _______ _____________ P.O. No. ______________________ Page _______ of _______ © 2006 Ingersoll Rand

Ordering Forms 

Forms & Examples 

FALCON LOCK 

Standard Cylinder Key System 

Specification Sheet 

This form must be filled out as completely and accurately as 

possible so that Falcon Lock may provide you with exactly what 

you need for your Standard Cylinder key system. 

Customer: Your Distribution 

Job Name: Your Job Name Here 

Location: City, State 

1. System Status 

New 

❏ 

Existing 

❏ 

Falcon 

❏ 

Key File or Factory Order # 

Weiser 

❏ 

Bitting Sheet (attach) 

❏ 

Construction Keyed Yes ❏ No ❏ 

2. System Type 

018 (standard) ❏ 

025* (restricted) ❏ 

* Requires prior factory approval 

3. Cylinders 

Type 

5 Pin ❏ 

6 Pin ❏ 

7 Pin ❏ 

Keyway(s) Specify: 

G 

Stamping: 

Keyset Symbol 

❏ 

Plug Face 

❏ 

Cylinder Side 

❏ 

5. Key Quantities 

Level 

Qty 

❏ GGGMK 

❏ GGMK 

❏ GMK 4 

❏ MK 2 

❏ SKD 

❏ Other: 

Change Keys 

# of keys per Cylinder 3 

# of keys per Key Symbol 

Special Function 

❏ Construction Keys 

❏ EMK 

❏ Housekeeping 

❏ Engineering 

❏ Janitor 

❏ Mechanical 

Other: 

6. Packing/Marking 

❏ Change Keys packed with Locks 

❏ Change Keys packed separately 

Marking Instructions 

4. Keys 

Key Section(s) Specify: 

G 

Type 

5 Pin ❏ 

6 Pin ❏ 

7 Pin ❏ 

Embossed 

❏ 

Non-Embossed 

❏ 

Large Bow 

❏ 

Plastic ADA Bow 

❏ 

Stamping 

Bitting Number 

❏ 

Keyset Symbol 

❏ 

Do Not Duplicate 

❏ 

U.S. Govt. Prop. Do Not Duplicate ❏ 

Special Stamping 

Special Instructions 

7. Shipping Address 

Construction Keys/Cores 

Permanent Keys/Cylinders 



13


Ordering Forms 

8. Additional Information (Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.) 

Provide system to allow for 100% expansion 

FALCON 

9. Bitting List 10. Name of person to contact with questions 

Required 

Yes ❏ No ❏ 

Ship To Address 

Name: 

End user address here 

LOA must accompany order for all 

Tel: 

Bitting list requests 

Fax: 

11. Name and signature of person responsible for the integrity of this key system: 

Name: 

Title: 

Signature: 

This document will become part of the permanent keying files for this project. If the 

requirements that have been specified on this document change, it is the responsibility of 

the end user/owner to notify their local factory representative or Falcon Lock. 

FALCON LOCK 



877-671-7011 

International Only 

001-512-712-1316 

US FAX 888-840-7732 

US FAX 888-840-7735 

International FAX 719-896-3387 

14 



Interchangeable Core Key 

System Specification Sheet 

Master Keying 

Customer: ___________________________________ 

Job Name:___________________________________ 

Location: ____________________________________ 


New 

Existing 


Key File or Factory Order # 

Best 

Arrow 


Construction Keyed 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 



A-2 (standard) ❏ 

A-4❏ 

3. Cores 

Style 

Slide Cover 

Capped 

Type 

6-Pin 

7-Pin 

Key Section(s) Specify: 

Stamping: 

Keyset Symbol 

Face 

Side 

4. Keys 

Keyway(s) Specify: 

Type 

6-Pin 

7-Pin 

Embossed 

Non-Embossed 

Plastic ADA Bow 

Stamping 


Keyset Symbol 


U.S. Govt. Prop. Do Not Duplicate 


❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 

❏ 


possible so that Falcon Lock may provide you with exactly 

what you need for your Key System. 

5. Keyed Quantities 

Level 

❏ GGGMK 

❏ GGMK 

❏ GMK 

❏ MK 

❏ SKD 

❏ Other 

Change Keys 

Number Keys per Symbol 

Number Keys per Cylinder 


❏ Control 

❏ Construction Keys 

❏ Construction Control 

❏ SKD Control 

❏ EMK 


❏ Engineering 



❏ Other: 


❏ Change Keys packed with Cores 






Qty. 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

______________ 

FALCON 

FALCON LOCK 


877-671-7011 phone 

US fax 888-840-7735 (East) 

888-840-7732 (West) 

Fax 719-896-3387 (International only) 

www.falcon.ingersollrand.com 




15

Master Keying 

8. Additional Information 

(Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.) 

FALCON 

9. Bitting List 

Required Yes ❏ No ❏ 

Ship To Address: 

10. Name of person to contact with questions 

Name: ______________________________________ 

Tel: _________________________________________ 

Fax: _________________________________________ 


Name: ______________________________________ 

Title: ________________________________________ 

Signature: ___________________________________ 

This document will become a part of the permanent keying files for this project. If the requirements that have been 

specified on this document change, it is the responsibility of the end user/owner to notify their local factory 

representative or Falcon Lock Company. 

FALCON LOCK 



877-671-7011 phone 

US fax 888-840-7735 (East) 

888-840-7732 (West) 



16 



Key System Specification Sheet 

Master Keying 

Customer: ___________________________________ 

Job Name:___________________________________ 

Location: ____________________________________ 


New 

❏ 

Existing 

❏ 


❏ 

Key File or Factory Order # ________________ 


❏ 

Construction Keyed 



018 (standard) ❍ 

025* (restricted) ❍ 

* Requires prior factory approval 

3. Cylinders 

Type 

5-Pin 

❏ 

6-Pin 

❏ 

7-Pin 

❏ 

Keyway(s) Specify: _______________________ 

Stamping 

Keyset Symbol 

❏ 

Plug Face 

❏ 

Cylinder Side 

❏ 


possible so that Falcon Lock company may provide you with 

exactly what you need for your Key System. 

5. Keyed Quantities 

Level 

Qty 

❏ GGGMK 

______________ 

❏ GGMK 

______________ 

❏ GMK 

______________ 

❏ MK 

______________ 

❏ SKD 

______________ 

❏ Other 

______________ 

Change Keys 

Number of Keys Per Symbol 

Number of Keys Per Cylinder ______________ 


❏ Construction Keys ______________ 

❏ EMK 

______________ 


______________ 


______________ 


______________ 

❏ Other: ________________________________ 


❏ Change Keys packed with Locks 



FALCON 

4. Keys 

Key Section(s) Specify: ____________________ 

Type 

5-Pin 

❏ 

6-Pin 

❏ 

7-Pin 

❏ 

Embossed 

❏ 

Non-Embossed 

❏ 

Large Bow 

❏ 

Stamping 


❏ 

Keyset Symbol 

❏ 


❏ 

U.S. Govt. Prop. Do Not Duplicate ❏ 






FALCON LOCK 



877-671-7011 phone 

US fax 888-840-7735 (East) 

888-840-7732 (West) 





17

Master Keying 

8. Additional Information 

(Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.) 

FALCON 

9. Bitting List 

Required Yes ❏ No ❏ 

Ship To Address: 

10. Name of person to contact with questions 

Name: ______________________________________ 

Tel: _________________________________________ 

Fax: _________________________________________ 


Name: ______________________________________ 

Title: ________________________________________ 

Signature: ___________________________________ 

This document will become a part of the permanent keying files for this project. If the requirements that have been 

specified on this document change, it is the responsibility of the end user/owner to notify their local factory 

representative or Falcon Lock. 

FALCON LOCK 



877-671-7011 phone 

US fax 888-840-7735 (East) 

888-840-7732 (West) 



18 




27W13865-SAMPLE 103 


SHIP BEST WAY 

PARTIAL SHIPMENT IS OK 


June 14, 2005 


John R. Doe, AHC 

Master Keyed 

ORDER 

Attach Key System Summary 


ACME OFFICE AND INDUSTRIAL PARK 

ABC CONTRACTING 


SAMPLE 123 SAMPLE-ABC May 17, 2005 


Name: 

John R Doe 

Phone: 

888.555.1212 

AMALGAMATED CONTRACT HARDWARE 

1234 Your Street 

Your Town, YS 00000-0000 

AMALGAMATED CONTRACT HARDWARE 

1234 Your Street 

Your Town, YS 00000-0000 

Fax. 

888.555.1717 



ITEM QTY PRODUCT DES FIN DES FIN (Only LATCH STRIKE EXT DIM Information, KA Groups, etc. 

one 

Key and Label Instructions____________K Hdg Item# Qty Door# hand 

per line Key MK 

(Enter below line item) item) Symbol(s) Symbol(s) 

1 4 MA561BB AVA 626 RH Best Style caping SFIC 

15 1 209 AA2 AA,A 

16 1 230 AB7 AB,A 

26 1 213 AB10 AB,A 

2 3 MA561BB AVA 626 LHR Best Style capping SFIC 

17 1 204B AA4 AA,A 

23 1 205 AA2 AA,A 

38 1 222 AA3X AA,A 

3 1 MA301 AVA 626 AVA 625 RHR 

12 1 202A 

4 1 C977 626 Supply with Adams-Rite Cam (A12667-001-00) 


FALCON

Master Keying 

Keying Schedule Form 

Total QTY PRODUCT FINISH 

FALCON 

Stamp/Mark: 

Quantity Keyset Door# Hand Misc Remark 

FALCON LOCK 



877-671-7011 phone 

US fax 888-840-7735 (East) 

888-840-7732 (West) 



20 



Introduction 


Function Chart B-2 

Complete Lock Pricing B-3 

Options B-4 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4 

Conventional Cylinder Options . . . . . . . . . . . .B-5 

Small Format Interchangeable Cores . . . . . .B-5 

Small Format Construction Cores . . . . . . . . .B-5 

Locks Less Components . . . . . . . . . . . . . . . .B-6 

Tactile Warning Strip (not available in 613) . .B-6 

Parts B-7 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7 

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7 

Chassis Assemblies . . . . . . . . . . . . . . . . . . . .B-7 

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-8 

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .B-8 

Complete Conventional Cylinders B-6 

How To Order 


Product Identification 

B 501 P D 

Latch Suffix 

D = Deadlatch 

S = Springlatch 

B-Series 


B = Less SFIC 

BDC = Disp. Const. Core 

BB = With SFIC Core (Best) 

G = With SFIC Core (Falcon) 

H = With Keyed Const. 

Core 

L = Less 6-Pin Cylinder 

P = 6-Pin Cylinder pinned 

to 5 chambers 

P6 = 6-Pin Cylinder pinned 

to 6 chambers 

CP6 = 6-Pin Cylinder 

Schlage C 

Function 

See B-2 

Lock Series 

SFIC = Small Format (Best ® Style) Interchangeable Core 

Finish Codes and Descriptions 

Code 

Description 

605 (US3) Bright Brass 

606 (US4) Satin Brass 

613 (US10B) Oil Rubbed Bronze 

625 (US26) Bright Chrome 

626 (US26D) Satin Chrome 

Standard Features - Furnished unless otherwise specified 

Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 3-Hour fire door 

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset 

Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box 

Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD) 

Door Range 1-3/8" - 2" standard 

Keys 

Two, Nickel silver cut keys per lock, Falcon G keyway 



B-1

B-Series • Functions 

ANSI A156.2 Series 4000 Grade 2 

Key-In-Lever Locks 

FALCON ANSI 

B101 F75 Passage/Closet Latchset 

Latch bolt by levers at all times. 

Grade 2 Standard Duty Cylindrical Locksets 

ANSI-A156.2, SERIES 4000, GRADE 2 


FALCON ANSI 

B561 F84 Classroom Lock 

Deadlocking latch bolt by levers. 

Outside lever is locked by key in 

outside lever. Inside lever is always free. 

B161 F111 Communicating Passage Lock 

Deadlocking latch bolt by inside 

lever. Non-removable blank plate 

outside. 

B581 F86 Store Room 

Deadlocking latch bolt by lever inside 

or key outside. Outside lever is always 

locked. Inside lever always free. 

B301 F76 Privacy/Bedroom/Bath Lock 

Latch bolt by levers. Outside lever 

locked by push button in inside lever. 

Rotating inside lever or closing door 

releases push button. Emergency 

release in outside lever unlocks door. 

B611 F90 Assisted Living/Corridor Lock 

Deadlocking latch bolt by levers except 

when locked by push button on inside 

lever. Key in outside lever locks or 

unlocks outside lever and releases 

button. Closing door releases push button. 

Inside lever is always free. 

B341 F112 Communicating Store Room Lock 

Deadlocking latch bolt by inside lever 

except when locked by key. 

Non-removable blank plate on opposite 

side of lever (22/32" projection). 

B12 

Dummy Trim 

Single Trim-surface mounted rigid 

lever. 

B501 F82 Entry Lock 

Push button locking. Button on inside 

locks outside lever until unlocked by 

key or by rotating inside lever. Inside 

lever always free. Deadlocking latch 

bolt. 

B511 F109 Entry/Office Lock 

Turn/push button locking. Pushing and 

turning button locks outside lever 

requiring use of key until button is 

manually unlocked. Push button 

locking. Pushing button locks outside 

lever until unlocked by key or by 

rotating inside lever. Inside lever always 

free. Deadlocking latch bolt. 

B-2 



Grade 2 Standard Duty Cylindrical Locksets 


Complete Locks • B-Series 

D (Dane) 

Q (Quantum) 

Key-In-Lever 

Designs and Finishes 

D Q 

605 

Function Description 626 606 625 613 

Single Cylinder Functions 

B341PD Connecting / Exit 

B501PD Entry 

B511PD Entry/Office $222.00 $234.00 $252.00 

B561PD Classroom 

B581PD Storeroom 

B611PD Assisted Living / Dormitory 251.00 263.00 281.00 

Non-Keyed Functions 

B101S Passage 

B161D Communicating Latch 

160.00 172.00 190.00 

B301S Privacy 185.00 197.00 215.00 

Dummy Trim 

B12 Half Dummy 72.00 78.00 88.00 



B-3

B-Series • Cylinder Options 

Conventional Cylinder Options 

Description 

Specify 

5 pinned cylinder P Suffix 

Example: B581P 

6 pinned cylinder P6 Suffix 

Example: B581P6 

6 pinned Competitor keyway cylinders* P6 Suffix 

Example: B581P6 (0 Bitted, KD, KA4 only) 

Schlage C (6 pin only) 

CP6 Suffix 

Example: B581CP6 (All other keying, not listed above) 

Add to Lock Price 

(per core) 

STD 

N/C 

* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C. 

B-Series Complete Conventional Cylinders 

Cylinder Mechanism 

5 Pin Cylinder A23155-02 

5 Pin Cylinder - B611 A23151-06 

6 Pin Cylinder A23165-02 

6 Pin Cylinder - B611 A23161-06 

Part Number 

Price 

Each 

$38.00 

Notes: 1) Finishes: 606 and 626 only. 

2) Specify keyway. 

3) Cylinders are furnished G keyway, keyed differently unless otherwise specified. 

4) Restricted sections add $9.00 to list price. See Restricted Keyway Policy (p. 8) for standard keyways and 

policy on use of restricted keyway cylinders. Contact 877-671-7011 for availability. 

Small Format Interchangeable Core and Small Format Construction Core 

Description 

Specify 

Small format core * 

G Suffix 

Example: B581GD6 

Small format core (Best Style) * 

BB Suffix 

Example: B581BB6 

Small format construction core ** 

H Suffix 

Example: B581HD6 

Less Small format core 

B Suffix 

Example: B581BD 

Small format disposable core 

BDC Suffix 

Example: B581BDC 


(per core) 

$39.00 

28.40 

N/C 

3.50 

* Keying must be specified. 

**Locks are assessed one non-refundable handling charge (50-231F) per core. 

Note: 5) 

Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details 

B-4 



Latches with Locks 

Latch and Strike Options • B-Series 

Backset 

Specify 

Description Springlatch/Deadlatch 301/611 


Square corner, 1-1/8" x 2-1/4", standard 57435 57635 

2-3/4" Square corner, 1" x 2-1/4" 57430 57630 N/C 

1/4" Radius round corner, 1" x 2-1/4" 57431 57631 

2-3/8" ** 

Square corner, 1" x 2-1/4" 57420 57620 

Square corner, 1-1/8" 57425 57625 N/C 

1/4" Radius round corner, 1" x 2-1/4" 57421 57621 

5" Backset extension link A31727-005-00 * $31.40 

* Backset extension link A31727-005-00 must be used with 2-3/8" backset latches 

** 2-3/8" backset is furnished as a 1" faceplate standard. 

Strikes with Locks 

Description Lip Length Specify Add to Lock Price 

ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 5164 N/C 

Square Corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 N/C 

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 01-046 N/C 

ANSI dust box 1" deep, steel - 005099-000-30 N/C 

ANSI, 1-1/4" x 4-7/8" 7/8" 5161 N/C 

Latches sold separate 

Finishes: 605, 613, 630 

Latch Face 

Backset & Price 

2-3/8" 2-3/4" Price 

1" Spring Latch (101) A57420-000 A57430-000 

1" Spring Latch (301) A57620-000 A57630-000 

1" Spring Latch - 1⁄4" Rad. (101) A57421-000 A57431-000 

1" Spring Latch - 1⁄4" Rad. (301) A57621-000 A57631-000 

1" Deadlatch A57420-00D A57430-00D 

1" Deadlatch (611) A57620-00D A57630-00D $23.30 

1" Deadlatch - 1⁄4" Rad. A57421-00D A57431-00D 

1" Deadlatch - 1⁄4" Rad. (611) A57621-00D A57631-00D 

1-1⁄8" Spring Latch (101) A57425-000 A57435-000 

1-1⁄8" Spring Latch (301) A57625-000 A57635-000 

1-1⁄8" Deadlatch A57425-00D A57435-00D 

1-1⁄8" Deadlatch (611) A57625-00D A57635-00D 

Strikes sold separate 

Finishes: 605, 606, 613, 626, 630 (ANSI only) 

Description Lip Length Specify List Price 

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" Q001-046 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 

Q001-048 $3.50 

1” 

Square corner, full lip 1-5/8" x 2-1/4" Q001-049 

ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 005164-000 11.40 

ANSI dust box 1" deep, steel - 005099-000-30 2.60 

ANSI, 1-1/4" x 4-7/8" 7/8" 005161-000 11.40 

Shaded items are standard components and are furnished with locks unless otherwise specified. 



B-5

B-Series • Trim and Chassis Options 

Locks Less Components 

Description 

Less standard cylinder 

Less latch 

Less strike 

Specify 

L suffix 

Example: B581LD DAN 

LLL for latch 

Example: B581PD DAN 626 LLL 5164 

LLL for strike 

Example: B581PD DAN 626 57435 LLL 

Deduct from 

Lock Price 

$38.00 

13.50 

7.10 

Tactile Warning (abrasive strip) 

Description Specify Add to Lock Price 

Abrasive Strip 

Preface the design code with 6 

Example: 6DA for DAN 

$49.50 

Notes: 1) Outside lever only has abrasive strip adhered to the back surface of the lever. 

2) B581 Storeroom function locks should be used on doors requiring tactile warning of danger. 

3) Abrasive strip not available in 613 finish. 

Levers 

Roses 

List Price 

Part Number Description 605, 606, 613, 

625, 626 

A31750-000 Lever, Dane closed 

A31751-000 Lever, Quantum closed 

A31750-001 Lever, Dane open 

A31751-001 Lever, Quantum open 

$34.40 

031700-002 Lever, Dane IC 

031701-002 Lever, Quantum IC 

List Price 

Part Number Description 605, 606, 613, 

625, 626 

031702-000 Rose, Outer 

031703-000 Rose, Inner 

$13.90 

A31764-000 Rose, Blank Insert and Post 

B Series Chassis Assemblies 

Part Number 

Conventional 

Cylinder IC Core Description Price 

A31706-000-00 

B101 Chassis 

A31707-000-00 

B161 Chassis 

$99.90 

A31709-000-00 A31709-001-00 B301/501 Chassis 

A31714-000-00 A31714-001-00 B511 Chassis 

122.00 

A31715-000-00 A31715-001-00 B561 Chassis 162.00 

A31716-000-00 A31716-001-00 B581 Chassis 

A31708-000 A31708-001 B341 Chassis – 1-5/8" – 2" Door Thickness 122.00 

A31708-002 A31708-003 B341 Chassis – 1-3/8" – 1-5/8" Door Thickness 

A31739-000 A31739-001 B611 Chassis 181.00 

Note: 4) Chassis provided with trim finish on B341 and B611. 

B-6 



Parts • B-Series 

Screws 

Part Number Description Finishes Size List Price 

021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $0.40 

024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo .18 

A31767-000 Screw pack 

031742-000 (2 ea), 024416-012 (2 ea), 605, 613, 626 4.00 

021164-016 (2 ea) 

Miscellaneous Parts 

Part Number Description List Price 

031705-000-30 Inside Rose Liner $1.40 

031718-000 Push button cap 2.10 

031719-000 Turn button cap 2.10 

031741-000-50 Lever insert 0.42 



B-7

B-Series 

Notes 

B-8 



Introduction 


Function Chart D100-2 

Complete Lock Pricing D100-3 

Options D100-4 

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . .D100-4 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-4 

Conventional Cylinder Options . . . . . . . .D100-5 

Small Format Interchangeable Cores . . .D100-5 

Small Format Construction Cores . . . . . .D100-5 

Locks Less Components . . . . . . . . . . . .D100-6 

Parts D100-7 

Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7 

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D100-7 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-8 

Adapters . . . . . . . . . . . . . . . . . . . . . . . . .D100-9 

Door/Frame Reinforcements . . . . . . . . . .D100-9 

Screws . . . . . . . . . . . . . . . . . . . . . . . . .D100-10 

Screw Packs . . . . . . . . . . . . . . . . . . . . .D100-10 

Complete Cylinders D100-5 

How To Order 



D 111 P F 

UL Listing Suffix 

F = UL Listed 

D100-Series 


B = Less SFIC 





Core 



to 5 chambers 


to 6 chambers 


to 7 chambers 


Schlage C 

Function 

See D100-2 

Lock Series 



Code 

Description 







Certification BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door 

Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw 

Strike 1-1/8" x 2-3/4", lipless, with box 


Door Range 1-3/8" - 1-3/4" standard 

Keys Two, Nickel silver cut keys per lock, Falcon G keyway 

Reinforcement Metal dust box reinforcer with three - 3" screws 

Trim Ring 1" Wrought brass or bronze, reinforced with security insert 

Backset 2-3/8" and 2-3/4" adjustable 



D100-1

D100-Series 

Functions 

BHMA / ANSI A156.5, 2001, Grade 1 

Bored Deadbolt Locks 

FALCON ANSI 

D111P E0171 Classroom Function 

Deadbolt thrown or retracted by key from outside. 

Inside turn will only retract bolt. Bolt automatically 

deadlocks when fully thrown. 

D121P E0161 Single Cylinder x Rose 

Deadbolt thrown or retracted by key only. Blank 

plate inside. Bolt automatically deadlocks when 

fully thrown. 

D131P E2141 Double Cylinder* 

Deadbolt thrown or retracted by key from either 

side. Bolt automatically deadlocks when fully 

thrown. 

D141P E2151 Single Cylinder x Turn 

Deadbolt thrown or retracted by key or by turn. 

Bolt automatically deadlocks when fully thrown. 

D151 

Turn x Turn 

Deadbolt thrown or retracted by turn unit from 

either side. Application for shelters. Bolt 

automatically deadlocks when fully thrown. 

* Caution: Double cylinder locks on residences and any door, in any structure, 

which is used for egress are a life safety hazard in times of emergency and their use 

is not recommended. Installation should be in accordance with existing codes only. 

D100-2 



Complete Locks • D100-Series 

Outside Cylinder Trim Inside Cylinder Trim Rose and Turn 

D100 Series 


Function Description 626 605 606 625 613 


D111P Classroom Function $122.00 $128.00 $138.00 

D121P Single Cylinder x Blank Rose 

D141P Single Cylinder x Turn 

108.00 114.00 124.00 

Double Cylinder Functions 

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in 

times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 

D131P Cylinder x Cylinder $138.00 $144.00 $154.00 


D151 Turn x Turn $89.00 $95.00 $105.00 

Notes: 

1) Split finishes are priced at the highest finish price. 

2) Keying options: see D100-5 

3) ‘F’ suffix must be added for UL product. 



D100-3

D100 Series • Options 

Square Corner 1/4" Radius Drive-In 

Deadbolts with Locks 

Backset 

Add to 

Description HSG Dia Specify Lock Price 

Square corner, 1-1/8" x 2-1/4", standard 30-256 

2-3/8" or 

Square corner, 1" x 2-1/4" 30-176 

2-3/4" 

1/4" Radius round corner, 1" x 2-1/4" 

1" 

30-178 N/C 

Circular, Drive-In bolt, 626 only 30-257 

For UL Listed Locks 

2-3/8" or Square corner, 1-1/8" x 2-1/4", standard 30-174 

2-3/4" UL Square corner, 1" x 2-1/4" 1" 30-172 N/C 


10-094 10-087 10-095 10-092 



Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/C 

ANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $6.20 

Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092 

Square Corner, 1-1/8" x 2-3/4", standard, no box 10-094 

Full Lip, square corner, 1-5/8" x 2-1/4", no box – 

10-095 N/C 

1-1/8" square corner and strike 

005075 

Security strike 030290 8.30 


D100-4 



Small Format IC 

Options • D100 Series 

Small Format 

Interchangeable Core 


Description 

Specify 


G Suffix 

Example: D111GD6 


BB Suffix 

Example: D111BB6 


H Suffix 

Example: D111HD6 


B Suffix 

Example: D111BD 


BDC Suffix 

Example: D111BDC 


(per core) 

$39.00 

28.40 

N/C 

3.50 

* Keying must be specified 

** Locks are assessed one non-refundable handling charge (50-231F) per core. 

Notes: 


2) Key section must be specified and applicable charges for restricted sections will be applied. See CYL-3. 

3) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details 



D100-5


Conventional Cylinders and Lock Less Components 


Description 

Less deadbolt 

Less strike 

Less conventional cylinder 

Less conventional cylinder D131 

Specify 

LLL for deadbolt suffix 

Example: D111P 605 LLL 10-094 


Example: D111P 605 30-257 LLL 

L suffix 

Example: D111L 

L suffix 


Deduct from 

Lock Price 

$9.40 

3.10 

15.30 

30.60 


Description 

Specify 


Example: D111P 


Example: D111P6 


(Not available on D131) 



Example: D111P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

Example: D111CP6 (All other keying, not listed above) 


(per core) 

STD 

N/C 

$11.00 

N/C 

D100-Series Complete Conventional Cylinders 

Cylinder Mechanism Part Number Price Each 

5 Pin Cylinder - D111, D141 Q500-064 

5 Pin Cylinder - D121 Q500-066 

5 Pin Cylinder - D131 Q500-070 $38.00 






51.00 

* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C 

Notes: 1) Finishes: 606 and 626 only 

2) Specify keyway 


4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways and 


D100-6 



Trim, Deadbolts, Cylinders 

Parts • D100-Series 

Rose and Turn Mounting Plate Rose 

Trim 

Part Number Specify Finish Description Price Each 

B302-041 • Rose and Turn $31.80 

B302-045 • Rose and Turn (D111) 31.80 

12-626 • Blank Rose (D121) 17.30 

B600-018 • Mounting plate for rose and rose & turn 31.80 

Note: 1) For trim rings and inserts see Cylinders: D100 


Deadbolts 

Part Number Specify Finish Housing Diameter Description Price Each 

Q330-256 • Square corner, 1-1/8" x 2-1/4" faceplate 

Q330-176 • 2-3/8" or 2- 3/4" Square corner, 1" x 2-1/4" faceplate $14.80 

Q330-178 • Universal 1/4" radius corner, 1" x 2-1/4" faceplate 

Q330-257 626 1" circular drive-in, 626 only 

Note: 2) 

UL deadbolts not available as parts. 



D100-7

D100 Series • Parts 

Strikes , Adapters 

10-064 10-087 10-092 10-094 10-095 

Strikes 

Part Specify Price 

Number Finish Description Lip Length Each 

10-064 • Drive-In, thimble strike, 1-3/16" deep - $11.90 

10-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 16.20 

10-094 • Square corner, 1-1/8" x 2-3/4", no box - 12.30 

10-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 

10-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box 

1-5/16" 7.60 

B520-283 - Box for 10-094 standard strike 

- 

0.68 

J250-028 2" strike mounting screws 0.78 

005075 • Security Strike 

6.80 

- 

030290 • 1-1/8” Square corner T-Strike 13.90 

38-031 B520-649 

B520-650 

Adapters 

Part Specify Price Each 

Number Finish Description (per finish) 

605 606 

626 625 613 

38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $10.10 $12.10 $14.10 

B520-649 • Trim ring w/shield for D131/D141 13.40 15.40 17.40 

B520-650 • Trim ring w/shield for IC functions 13.40 15.40 17.40 

36-071 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 10.80 12.80 14.80 

D100-8 



Screws 


Screws 

Description Application Price Each 

(Order in 

Part Specify multiples 

Number Finish Size Type Use Door Thickness of 100) 

Keyed, Single Conventional Cylinder 

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4" 

B600-101 1/4"-28 x 2.425" POH mach. Mounting over 1-3/4" $1.60 

B600-066 • 6-32 x 1/4" PH mach. Turn - 

B520-298 10-32 x 3/8" PH mach. Anti-pry shield - 

Keyed, Single SFIC Cylinder 


B600-066 • 6-32 x 1/4" PH mach. Turn - 

$1.60 

Keyed, Double Conventional Cylinder 

B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" 

B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4" $1.60 


Keyed, Double SFIC Cylinder 



$1.60 

All Functions 

C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - 

J520-028 #8 x 2" PFH wood 2" strike screw - $0.82 

R525-256 #12 x 3" PFH wood 3" metal dust box - 

Screw Packs 


Number Finish Door Thickness Contents Each 


61-500 • 1 3/8" – 1 3/4" (1) B600-018 

(2) B600-100 $10.50 

(2) B600-066 

(4) C603-897 

61-501 • over 1 3/4" – 2 1/4" (1) B600-018 

(2) B600-101 $10.50 

(2) B600-066 

(4) C603-897 


61-500 • 1 3/8" – 2" (1) B600-018 

(2) B600-100 $10.50 

(2) B600-066 

(4) C603-897 


61-502 • 1 3/8" – 1 3/4" (2) B600-047 $7.40 

(4) C603-897 

61-503 • over 1 3/4" – 2 1/4" (2) B600-078 7.40 

(4) C603-897 


61-507 • 1 3/8" – 2" (2) B600-053 $7.40 

(4) C603-897 



D100-9

Notes 

D100-10 



Introduction 


Function Chart D200-2 

Complete Lock Pricing D200-3 

Options D200-4 

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D200-4 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-4 

Conventional Cylinder Options . . . . . . . .D200-5 

Small Format Interchangeable Cores . . .D200-5 

Small Format Construction Cores . . . . . .D200-5 

Locks Less Components . . . . . . . . . . . .D200-6 

Parts D200-7 

Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-8 

Adapters . . . . . . . . . . . . . . . . . . . . . . . . .D200-9 

Door/Frame Reinforcements . . . . . . . . . .D200-9 

Screws . . . . . . . . . . . . . . . . . . . . . . . . .D200-10 

Screw Packs D200-10 

Complete Cylinders D200-5 

How To Order 



D 211 P F 

UL Listing Suffix 

F = UL Listed 

D200-Series 


B = Less SFIC 





Core 



to 5 chambers 


to 6 chambers 


to 7 chambers 


Schlage C 

Function 

See D200-2 

Lock Series 



Code 

Description 







Certification BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire door 

Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw 

Strike 1-1/8" x 2-3/4", lipless, with box 




Reinforcement Metal dust box reinforcer with three - 3" screws 

Trim Ring 1" Wrought brass or bronze, reinforced with security insert 

Backset 2-3/8" and 2-3/4" adjustable 



D200-1

D200 Series 

Functions 

BHMA / ANSI A156.5, 2001, Grade 2 

Bored Deadbolt Locks 

FALCON ANSI 

D211P E0172 Classroom Function 

Deadbolt thrown or retracted by key from outside. 

Inside turn will only retract bolt. Bolt automatically 


D221P E0162 Single Cylinder x Rose 

Deadbolt thrown or retracted by key only. Blank 

plate inside. Bolt automatically deadlocks when 

fully thrown. 

D231P E2142 Double Cylinder* 

Deadbolt thrown or retracted by key from either 

side. Bolt automatically deadlocks when fully 

thrown. 

D241P E2152 Single Cylinder x Turn 

Deadbolt thrown or retracted by key or by turn. 

Bolt automatically deadlocks when fully thrown. 

D251 

Thumbturn x Thumbturn 

Deadbolt thrown or retracted by turn unit from 

either side. Application for storm shelters. Bolt 

automatically deadlocks when fully thrown. 

D261 E2192 Thumbturn, Inside Only 

Deadbolt thrown or retracted by turn unit only. No 

outside trim. Bolt automatically deadlocks when 

fully thrown. 

D261M E01112 Thumbturn, Inside x Rose 

Deadbolt thrown or retracted by turn unit only. 

Outside blank rose. Bolt automatically deadlocks 

when fully thrown. 

D271 

Thumbturn x Occupancy Indicator 

Deadbolt thrown or retracted by turn unit only. 

Occupancy indicator on outside (reads either in use 

or vacant with color coding). Bolt automatically 





D200-2 



Outside Cylinder Trim 

Inside Cylinder Trim 

Complete Locks • D200-Series 

Rose and Turn 

D200 Series 



Keyless 

D251 Turn x Turn 

D261 Turn, Inside Only $59.00 $65.00 $75.00 

D261M Turn , Inside x Rose 

D271 Turn, Inside x Occupancy Indicator 60.00 66.00 76.00 


D211P Classroom Function $80.00 $86.00 $96.00 

D221P Single Cylinder x Rose 

D241P Single Cylinder x Turn 

$77.00 $83.00 $93.00 


CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in 


D231P Double Cylinder* 

D231P Double Cylinder* 

$100.00 $106.00 $116.00 

Notes: 


2) D271 Occupancy Indicator deadbolt is shipped with emergency key (61-509) and instructions. 

3) ‘F’ Suffix must be added for UL product 



D200-3

D200 Series • Bolt & Strike Options 

Square Corner Round Corner Drive-In 

Deadbolts with Locks 

Backset 

Add to 

Description HSG Dia Specify Lock Price 


2-3/8" or 

Square corner, 1" x 2-1/4" 30-175 

2-3/4" 

1/4" Radius round corner, 1" x 2-1/4" 

1" 

30-177 N/C 


For UL Listed Locks 

2-3/8" or Square corner, 1-1/8" x 2-1/4", Standard 30-173 

2-3/4" UL Square corner, 1" x 2-1/4" 

30-171 

1" 


N/C 

10-064 10-087 10-092 10-094 10-095 



Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/C 

ANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $6.20 

Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092 

Square Corner, 1-1/8" x 2-3/4", standard, no box 10-094 

Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095 N/C 

– 

1-1/8" square corner and strinke 

005075 

Security strike 030290 8.30 


D200-4 



Small Format IC 

Options • D200-Series 

Small Format 

Interchangeable Core 


Description 

Specify 


G Suffix 

Example: D211GD6 


BB Suffix 

Example: D211BB6 


H Suffix 

Example: D211HD6 


B Suffix 

Example: D211BD 


BDC Suffix 

Example: D211BDC 


(per core) 

$39.00 

28.40 

N/C 

3.50 



Notes: 


2) Key section must be specified and applicable charges for restricted sections will be applied. See CYL-3 

Handling charge (50-231F) will be charged per core. See page CYL-11 for details. 




D200-5


Conventional Cylinders and Lock Less Components 


Description 

Less deadbolt 

Less strike 

Less conventional cylinder 

Less conventional cylinder D231 

Specify 

LLL for deadbolt suffix 

Example: D211P 605 LLL 10-094 


Example: D211P 605 30-171 LLL 

L suffix 


L suffix 


Deduct from 

Lock Price 

$9.40 

3.10 

15.30 

30.60 


Description 

Specify 


(per core) 


Example: D211P 

STD 



N/C 


(Not available on D231) 


$10.90 


Example: D211P6 (0 Bitted, KD, KA4 only) 

Schlage C (6 pin only) CP6 Suffix N/C 

Example: D211CP6 (All other keying, not listed above) 


D200-Series Complete Conventional Cylinders 










$38.00 

51.00 

Notes: 

1) Finishes: 606 and 626 only 





D200-6 



Trim, Deadbolts, Cylinders 


Rose and Turn Mounting Plate Rose 

Trim 

Part Number Specify Finish Description Price Each 

B302-041 • Rose and Turn $31.80 

B302-045 • Rose and Turn (D211) 31.80 

12-626 • Blank Rose (D221) 17.30 

B600-018 • Mounting plate for rose and rose & turn 31.80 


Deadbolts 

Part Number Specify Finish Housing Diameter Description Price Each 

Q330-253 • Square corner, 1-1/8" x 2-1/4" faceplate 

Q330-175 • 2-3/8" or 2- 3/4" Square corner, 1" x 2-1/4" faceplate $14.80 

Q330-177 • Universal 1/4" radius corner, 1" x 2-1/4" faceplate 

Q330-254 626 1" circular drive-in, 626 only 

Note: 1) 

UL deadbolts not available as parts. 

Keys - Emergency For Occupancy Indicator 

Part Number Description Price Each 

61-509 Emergency Release Key – Standard Size for Occupancy Indicator $6.50 

61-510 Emergency Release Key – Large Size for Occupancy Indicator 13.20 



D200- 7


Strikes , Adapters 

10-064 10-087 10-094 10-094 10-095 

Strikes 


Number Finish Description Lip Length Each 

10-064 • Drive-In, thimble strike, 1-3/16" deep - $11.90 

10-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 16.20 

10-094 • Square corner, 1-1/8" x 2-3/4", no box - 12.30 

10-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 

10-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box 

1-5/16" 7.60 

B520-283 - Box for 10-094 standard strike 

- 

0.68 

J250-028 2" strike mounting screws 0.78 

005075 • Security Strike 

6.80 

- 

030290 • 1-1/8” Square corner T-Strike 13.90 

38-031 B520-649 

B520-650 

Adapters 

Part Specify Price Each 

Number Finish Description (per finish) 

605 606 

626 625 613 

38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $10.10 $12.10 $14.10 

B520-649 • Trim ring w/shield for D131/D141 13.40 15.40 17.40 

B520-650 • Trim ring w/shield for IC functions 13.40 15.40 17.40 

36-071 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 10.80 12.80 14.80 

D200-8 



Screws 


Screws 

Description Application Price Each 

(Order in 

Part Specify multiples 

Number Finish Size Type Use Door Thickness of 100) 



B600-101 1/4"-28 x 2-1/2" POH mach. Mounting over 1-3/4" $1.60 

B600-066 • 6-32 x 1/4" PH mach. Turn - 



B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4" $1.60 

B600-066 6-32 x 1/4" PH mach. Turn - 



B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4" $1.60 





$1.60 

Keyless, D261 

B600-066 • 6-32 x 1/4" PH mach. Turn - 

B600-048 10-32 x 1/2" PH mach. Mounting plate - $1.60 

F506-359 #8 x 3/4" RH wood Mounting plate 0.60 

Keyless, D261M, D271 

B520-662 10-32 x 1-3/4" POH mach. Mounting - 

B520-663 10-32 x 1-3/4" POH mach. Mounting - $1.60 

B600-066 • 6-32 x 1/4" PH mach. Turn 

All Functions 

C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - 

J520-028 #8 x 2" PFH wood 2" strike screw - $0.82 

R525-256 #12 x 3" PFH wood 3" metal dust box - 



D200-9


Screw Packs 

Screw Packs 


Number Finish Door Thickness Contents Each 

Keyless, D261 

61-506 • 1 3/8" – 2 1/4" (2) B600-048 

(2) F605-359 $12.60 

(4) C603-897 

(1) B600-018 

(2) B600-066 

Keyless, D261M, D271 

61-504 • 1-3/8" - 1-3/4" (2) B520-662 

(4) C603-897 $16.50 

(2) B600-066 

(4) B600-018 

61-505 • 1-3/4" - 2-1/4" (2) B520-663 

(4) C603-897 16.50 

(2) B600-066 

(4) B600-018 


61-500 • 1 3/8" – 1 3/4" (1) B600-018 

(2) B600-100 $10.50 

(2) B600-066 

(4) C603-897 

61-501 • over 1 3/4" – 2 1/4" (1) B600-018 

(2) B600-101 10.50 

(2) B600-066 

(4) C603-897 


61-500 • 1 3/8" – 2" (1) B600-018 

(2) B600-100 $10.50 

(2) B600-066 

(4) C603-897 


61-502 • 1 3/8" – 1 3/4" (2) B600-047 $7.40 

(4) C603-897 

61-503 • over 1 3/4" – 2 1/4" (2) B600-078 7.40 

(4) C603-897 


61-507 • 1 3/8" – 2" (2) B600-053 $7.40 

(4) C603-897 

D200-10 



Introduction 


Function Chart H-2 

Complete Lock Pricing H-3 

Options H-4 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-4 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-4 

Parts H-5 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

Chassis Assemblies . . . . . . . . . . . . . . . . . . . .H-5 

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .H-5 

Complete Conventional Cylinders H-6 

Conventional Cylinder Options . . . . . . . . . . .H-5 

Small Format Interchangeable Cores . . . . . .H-5 

Small Format Construction Cores . . . . . . . . .H-5 

Locks Less Components . . . . . . . . . . . . . . . .H-5 

Tactile Warning Strip (not available in 613) . .H-5 

How To Order 



H 101 P D 

Latch Suffix 

D = Deadlatch 

H-Series 


B = Less SFIC 





Core 



to 5 chambers 


to 6 chambers 


Schlage C 

Function 

See H-2 

Lock Series 

For SFIC option, 6 or 7 pin must be specified 



Code 

Description 



630 (US32D) Satin Stainless 


Certification UL Listed for 1-1/2-Hour fire door 

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw 

Strike 1-1/8" x 2-3/4" lipless and 1-1/8" x 2-3/4" T strike 


Door Range 1-3/8" - 2" standard 

Keys 


Backset 2-3/4" 



H-1

H-Series • Functions 

Interconnected Locks 

FALCON ANSI 

H101 F95 Entry/Single Lock 

Latch bolt operated by knob or lever 

from either side. Rotating turn from 

inside or key from 

outside extends dead bolt. Dead bolt 

and latch bolt retract by rotating inside 

knob or lever. 

H451 F100 Hotel/Motel Lock 

Deadlocking latch bolt operated by key 

outside or rotating inside knob. Outside 

knob rigid. Rotating turn from inside or 

emergency key outside extends dead 

bolt. Both dead bolt and deadlocking 

latch bolt retract by rotating inside 

knob. Depressing spanner button in 

inside knob operates visual indicator 

shutting out all keys except emergency 

key. Rotation of inside spanner button 

provides lockout feature. 


FALCON ANSI 

H461 F101 Hotel/Motel Lock 


outside or rotating inside knob. Outside 

knob rigid. Rotating turn from inside 

extends dead bolt and changes visual 

message on outside from vacant to 

occupied. Both dead bolt and 

deadlocking latch bolt retract by 

rotating inside knob. Depressing 

spanner button in inside knob operates 

visual indicator shutting out all keys 

except emergency key. Rotation of 

inside spanner button provides lockout 

feature. 

H511 F96/97 Entry/Double Locking 

Dead bolt thrown or retracted by key in 

upper lock from outside or by inside 

turn. Deadlocking latch retracted by key 

in outer knob when locked by pushing 

button in inner knob. Outer knob may 

be fixed in locked position by rotating 

button. Dead bolt and latch bolt 

retracted by rotating inside knob. 

H-2 



Standard Duty Tubular Locksets 

Interconnected Locks • H-Series 

E (Elite) H (Hana) D (Dane) 



E H D 

605 613, 630 605 613, 630 † 

Functions Description 

H101PD Passage Deadlock $280.00 $310.00 $305.00 $335.00 

H451PD* Hotel 360.00 390.00 392.00 422.00 

H461PD* Hotel with Indicator 373.00 403.00 405.00 435.00 

H511PD* Entry/Office 334.00 364.00 363.00 393.00 

*Available with lever inside and knob outside only. Specify both outside and inside designs. 

† When Dane 630 is ordered for exterior, Dane 626 is provided for interior. 

Note: 1) Includes two (2) guest keys and instruction plate (A03040-000-00). 

Does not include master keying. 



H-3

H-Series • Latch and Strike Options 

Deadbolts/Spring Latches (H101) 

Specify 

Combo Add to Lock 

Backset Deadbolt Deadlatch Number Price 

74435 57435 01-062 

2-3/4" 74430 57430 01-063 

74431 57431 01-064 

74420 57420 01-066 

N/C 

2-3/8" 74425 57425 01-065 

74421 57421 01-067 

Deadbolts/Deadlatches (H511) 

Specify 



74435 57435 01-068 

2-3/4" 74430 57430 01-069 

74431 57431 01-070 

74420 57420 01-072 

N/C 

2-3/8"* 74425 57425 01-071 

74421 57421 01-073 

Deadbolts/Deadlatches (H451/461) 

Specify 



74435 57435 01-074 

2-3/4" 74430 57430 01-075 

74431 57431 01-076 

74420 57420 01-078 

N/C 

2-3/8"* 74425 57425 01-077 

74421 57421 01-079 

* 2-3/8" backset is furnished as a 1" faceplate standard. 


Specify 

Combo 

Add to Lock 

Latch strike Deadbolt strike Number Price 

01-046 010018-1 01-080 

01-048 5051-1 01-086 

5164 010018-1 01-082 

01-049 5051 01-084 N/C 

01-049 010018-1 01-083 

01-048 010018-1 01-085 

005099-000-30 


H-4 



Latches 

Finishes: 605, 613, 630 

Latch Face 

Latches and Strikes • H-Series 


2-3/8" 2-3/4" Price 

1" Spring Latch A57420-000 A57430-000 


1" Deadlatch (H451, H461) A57620-00D A57630-00D 

1" Spring Latch - 1/4" Rad. A57420-000 A57431-000 

1" Deadlatch - 1/4" Rad. A57421-00D A57431-00D 

1" Deadlatch - 1/4" Rad. (H451, H461) A57621-00D A57631-00D 

1-1/8"" Spring Latch A57625-000 A57635-000 

1-1/8" Deadlatch A57425-00D A57435-00D 

1-1/8" Deadlatch (H451, H461) A57625-00D A57635-00D 

Bolts 

Finishes: 606, 613, 630 

Latch Face 

$23.30 


2-3/8" Price 2-3/4" Price 

1" Deadbolt A74420-000 A74430-000 

1" Deadbolt - 1/4" Rad. A74421-000 

A74431-000 

$19.70 

1-1/8" Deadbolt A74425-000 A74435-000 

Drive-In* A76429-000 A76439-000 

*Available in 626 only. 

$26.90 

Deadlatch Strikes Finishes: 605, 613, 626, 630 


ANSI, 1-1/4" x 4-7/8" 1-5/16" 005164-000 $11.40 

Square Corner, T-strike, 1-1/8" x 2-3/4" ** Q001-046 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" ** 1" Q001-048 3.60 

Square corner, full lip 1-5/8" x 2-1/4" ** Q001-049 


** Not available in 630. 

Screws 


024416-012 Latch and strike screws 605, 606, 613, 626, 630 8-32 x 3/4"combo $ 0.20 

021164-016 ANSI strike screws 605, 606, 613, 626, 630 12-24 x 1" combo 0.40 



H-5

H-Series • Cylinders & Options 

H-Series • Complete Cylinders 


5-pin cylinder H511 knobs 

A30040 

5-pin cylinder H all other functions & designs 

A30028 

6-pin cylinder H511 knobs A30040-01 

$40.00 

6-pin cylinder H all other functions & designs A30028-01 

* Cylinders are furnished G keyway, keyed differently unless otherwise specified. 

** Restricted sections see CYL-3. See Keys & Keying for standard keyways. Contact 877-671-7011 for availability. 




Description 

Specify 


(per core) 


Example: H101P 

STD 


Example: H101P6 

6 pinned Competitor keyway cylinders* P6 Suffix N/C 

available on H101, H511 only 

Example: H101P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

available on H101, H511 only 

Example: H101CP6 (All other keying, not listed above) 








Description Specify Add to Lock Price (per core) 


G Suffix 

Example: H101GD6 


BB Suffix 

$39.00 

Example: H101BB6 


H Suffix 

Example: H101HD6 

28.40 


B Suffix 

Example: H101BD 

N/C 


BDC Suffix 

Example: H101BDC 

3.50 



Notes: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details 


Description Specify Deduct from Lock Price per latch or strike 


L suffix 

Example: H101LD DAN 

$40.00 

Less latch - per latch 

LLL suffix 

Example: H101PD DAN 626 LLL/01-080 

13.00 

Less strike - per strike 

LLL suffix 

Example: H101PD DAN 626 01-062 LLL 

2.60 

Tactile Warning (Abrasive coat) 

Abrasive 




$44.20 

Note: 1) Outside lever only is coated unless otherwise specified. 

2) Not available in 613 

H-6 



Introduction 


Function Chart 

MA-2 

MA Complete Lock Pricing 

MA-4 

Option 

Conventional Cylinder Options . . . . . . . . . .MA-7 

SFIC Cylinder Options . . . . . . . . . . . . . . . .MA-7 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

Locks Less Components . . . . . . . . . . . . . .MA-12 

Non-Standard Door Thickness . . . . . . . . .MA-12 

Abrasive Coating and Knurling . . . . . . . . .MA-12 

Lead Wrap . . . . . . . . . . . . . . . . . . . . . . . . .MA-12 

MA Series Parts 

Armor Fronts (Scalps) . . . . . . . . . . . . . . . . .MA-9 

Lock Cases . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

Knob & Levers . . . . . . . . . . . . . . . . . . . . . .MA-10 

Roses and Escutcheons . . . . . . . . . . . . . .MA-11 

Screws and Screw Packs . . . . . . . . . . . . .MA-11 

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

Trim Packs . . . . . . . . . . . . . . . . . . . . . . . .MA-13 

Full Body Mortise Deadlocks 

MA-14 

How To Order 



MA 501 

P 

Latch Suffix 

D = Deadlatch 

MA-Series 


B = Less SFIC 




H = With SFIC Keyed Const. 

Core 



to 5 chambers 


to 6 chambers 

P7 = 7-Pin Cylinder 

to 7 chambers 


Schlage C 

Function 

See MA-2 

Lock Series 



Code 

Description 








Certification ANSI A156.13, Series 1000, Grade 1 Operation and Security, UL Listed for 3-Hour fire door 

with SFIC Interchangeable Core Cylinders: Grade 3 Security 

Latch 2 piece stainless steel anti-friction bolt 3/4" projection. 

Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box 







MA-1

MA-Series • Functions 

ANSI A156.13 Series 1000 Grade 1 Operation 

Mortise 

FALCON ANSI 

Mortise 

FALCON 

ANSI 

MA101 F01 Passage/Closet Latchset 

Latch bolt by knob/levers at all times. 

MA411* F30 Asylum Lock 

Latch bolt operated by key from either 

side. Both knobs/levers always 

inoperative. Auxiliary dead latch. 

MA161 F31 Connecting Room/Exit Latch 

Latch bolt operated by knob/lever from 

inside. No trim outside. Auxiliary dead 

latch. 

MA301 F02 Privacy Lock 

Latch bolt by knobs/levers either side, 

dead bolt by turn inside or emergency 

release outside. 

MA311 F19 Privacy, Bedroom or Bath Lock 

Latch bolt by knobs/levers. Dead bolt by 

turn from inside and emergency release 

outside. Rotating inside knob/lever 

retracts both bolts. 

MA321 F22 Privacy Lock 


either side except when outside 

knob/lever is locked by inside T-turn. 

Operating inside knob/lever, closing door 

or operating outside emergency release 

unlocks outside knob/lever. 

MA371* F14 Store Door Lock 

Latch bolt by knobs/levers either side. 

Dead bolt by key from either side. 

MA381 F09 Apartment, Exit Lock 


either side, except when outside 

knob/lever is locked by key from inside. 

When outside knob/lever is locked, latch 

bolt is retracted by key from outside or 

by operating inside lever. Auxiliary dead 

latch. 

MA431 F34 Classroom Security Lock with 

Deadbolt 



knob/lever is locked from inside or 

outside by key. Dead bolt retracted by 

key from inside or outside. Operating 

inside knob/lever retracts both bolts and 

unlocks outside. Latch bolt dead locked 

when dead bolt is thrown. 

MA441 F32 Classroom Security Lock 



knob/lever is locked from inside or 

outside by key. When outside knob/lever 

is locked, latch bolt is retracted by key 

from inside or outside or by operating 

inside knob/lever. Auxiliary dead latch. 

MA451 F15 Hotel Guest Lock 

Latch bolt operated by key from outside 

or by operating inside knob/lever. Outside 

knob/lever is always inoperative. Dead 

bolt projected by turn from inside and all 

keys except emergency key are shut out. 

Operating inside knob/lever retracts both 

bolts. Auxiliary dead latch. 

MA521 F04 Entry/Office Lock 


either side except when 

outsideknob/lever is made inoperative 

by buttons in face. When outside 

knob/lever is locked, latch bolt is 

retracted by key from outside or by 

operating inside knob/lever. 

Auxiliary dead latch. 

MA531 F20 Apartment Corridor Door Lock 


either side, except when outside 

knob/lever is made inoperative by 

buttons in face. Dead bolt operated by 

key outside or turn inside. Key outside 

operates both bolts. Operating inside 

knob/lever retracts both bolts and 

outside remains locked. Latch bolt is 

deadlocked when outside knob/lever is 

made inoperative or when the dead bolt 

is projected. When dead bolt is 

retracted, knob/lever is unlocked by 

buttons in face. 




MA-2 



Functions • MA-Series 

ANSI A156.13 Series 1000 Grade 1 Operation 

Mortise 

FALCON ANSI 

Mortise 

FALCON 

ANSI 

MA541 F21 Entry/Office Lock 

Latch bolt by knobs/levers either side. 

Dead bolt by key outside or turn inside. 

MA551 F06 Holdback Lock 

Latch bolt operated by lever from either 

side except when outside lever is locked 

from outside by key. Latch bolt can be 

locked in a retracted position by key. 

When outside lever is locked, latch bolt 

is retracted by key from outside or by 

operating inside lever unless latch bolt 

has been locked in a retracted position. 

Auxiliary dead latch. 

Note: Chassis is handed 

MA561 F05 Classroom Lock 

Latchbolt operated by knob/lever from 


knob/lever is locked by key. When 

outside knob/lever is locked, latchbolt 

is retracted by key from outside or by 

operating inside knob/lever. Auxiliary 

latch deadlocks latchbolt when door is 

closed. Inside knob/lever always free 

for immediate exit. 

MA571 F13 Dormitory or Exit Lock 


either side. Dead bolt projected by key 

from outside and turn from inside. 

Operating inside knob/lever retracts 

both bolts and unlocks outside. 

MA851 

MA881 

Storeroom-Fail Safe EL 


either side except when outer knob/lever 

is electrically locked. When outer 

knob/lever is locked, latch bolt retracted 

by key in cylinder outside. 

Deadlocking latch. 

Storeroom-Fail Secure EU 


inside except when outer knob/lever is 

electrically unlocked, then latch bolt 

from either side. When locked, key in 

cylinder outside retracts latch bolt. 


MA911 F29 Classroom Dead Lock 

Key from outside operates dead bolt. 

Turn from inside retracts but does not 

project dead bolt. 

MA921 F18 Deadlock 

Dead bolt by key outside only. 

MA931* F16 Deadlock 

Dead bolt by key from either side. 

MA581 F07 Storeroom Lock 

Latch bolt operated by key from outside 

or by operating inside knob/lever. 

Outside knob/lever is always 

inoperative. Auxiliary dead latch. 

MA941 F17 Deadlock 

Dead bolt by key outside or turn inside. 

MA621 F08/F10 Front Door / Apartment Corridor 

Latch bolt is operated by knob/lever 

from either side, except when outside 

knob/lever is made inoperative by 

buttons in face. Dead bolt is operated 

by turn inside. Key outside operates 

both bolts. 

MA12/MA18 

Dummy Trim 

Single or double available. 

Single (MA12) 

Double (MA18) 

MA641 

Dormitory Lock 

Latch bolt by knob/lever inside and key 

outside. Inside knob/lever free. Outside 

knob/lever rigid. Dead bolt by key 

outside or T-turn inside. Rotating inside 

knob/lever retracts both bolts. 







MA-3

MA-Series • Complete Locks 

HG (Hana-Gala) 

HN (Hana-Napa) 

MA Knob Styles – Hana 


HANA – GALA 

HANA – NAPA 

605 606 605 606 

Function Description 626 625 613 630 626 625 613 630 


MA521P Entry/Office 


MA551P Holdback 

MA561P Classroom $446.00 $458.00 $476.00 $459.00 $471.00 $489.00 

MA571P Dormitory Exit 

MA581P Storeroom 

MA531P Apartment Corridor 

MA621P Front Door 459.00 471.00 489.00 465.00 477.00 495.00 

MA641P Dormitory 

MA451P Hotel 507.00 519.00 537.00 518.00 530.00 548.00 

MA851P Elect. Storeroom (Fail Safe) 1 

MA881P Elect. Storeroom (Fail Secure) 1 

896.00 908.00 926.00 904.00 916.00 934.00 


MA371P* Store Door 

MA381P Apartment/Exit 

MA411P* Asylum $509.00 $521.00 $539.00 $515.00 $527.00 $545.00 

MA431P Classroom Security with deadbolt 

MA441P Classroom Security 

* CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in 



MA101 Passage $309.00 $321.00 $339.00 $318.00 $330.00 $348.00 

MA161 Exit/ Connecting 329.00 341.00 359.00 339.00 351.00 369.00 

MA301 Privacy 

MA311 Privacy 386.00 398.00 416.00 402.00 414.00 432.00 

MA321 Privacy 

MA12 Half Dummy 120.00 126.00 136.00 124.00 130.00 140.00 

MA18 Full Dummy 239.00 251.00 269.00 249.00 261.00 279.00 

Note: 

1) Specify 12 or 24 VDC. 

MA-4 



Grade 1 Mortise Locks with Cast/Forged or Heavy 

Wrought Trim ANSI-A156.13, SERIES 1000, GRADE 1 

Complete Locks • MA-Series 

AG (Avalon-Gala) 

DG (Dane-Gala) 

QG (Quantum-Gala) 

SG (Sutro-Gala) 

Cast Lever 

MA Lever/Rose Styles 


AG DG QG SG 

605 606 






MA561P Classroom $503.00 $515.00 $533.00 




MA621P Front Door 517.00 529.00 547.00 


MA451P Hotel 560.00 572.00 590.00 



929.00 941.00 959.00 



MA381P Apartment /Exit 

MA411P* Asylum $557.00 $569.00 $587.00 


MA441P Classroom Security 




MA101 Passage $392.00 $404.00 $422.00 

MA161 Exit/Connecting 407.00 419.00 437.00 

MA301 Privacy 

MA311 Privacy 456.00 468.00 486.00 

MA321 Privacy 

MA12 Half Dummy 162.00 168.00 178.00 

MA18 Full Dummy 322.00 334.00 352.00 

Notes: 

1) Specify 12 or 24 VDC. 



MA-5

MA-Series • MA Lever Styles 

Grade 1 Mortise Locks with Cast/Forged or Heavy 

Wrought Trim ANSI-A156.13, SERIES 1000, GRADE 1 

AN (Avalon-Napa) 

DN (Dane-Napa) 

QN (Quantum-Napa) 

SN (Sutro-Napa) 

Cast Lever 

MA Lever Escutcheon Styles 


AN DN QN SN 

605 606 613 

Function Description 626 625 630 





MA561P Classroom $530.00 $542.00 $560.00 




MA621P Front Door 540.00 552.00 570.00 


MA451P Hotel 588.00 600.00 618.00 



977.00 989.00 1,007.00 



MA381P Apartment/Exit 

MA411P* Asylum $583.00 $595.00 $613.00 


MA441P 

* CAUTION: 

Classroom Security 

Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in 



MA101 Passage $413.00 $425.00 $443.00 

MA161 Exit/Connecting 427.00 439.00 457.00 

MA301 Privacy 

MA311 Privacy 477.00 489.00 507.00 

MA321 Privacy 

MA12 Half Dummy 169.00 175.00 185.00 

MA18 Full Dummy 338 350.00 368.00 

Notes: 1) Specify 12 or 24 VDC. 

MA-6 



Conventional Mortise Cylinders 

Cylinders • MA-Series 

Pins Length Description Number 626 605 606 613 629 630 

5 or 6 

1-1/8 985 

Mortise 

1-1/4 

986 

$53.00 $55.00 

1-3/8 987 53.00 55.00 

5, 6, or 7 

1-1/2 

988 63.00 65.00 

Mortise 

1-3/4 990 78.00 80.00 

2 992 81.00 83.00 

6 

1-1/8 250 

1-1/4 251 

6 1-3/8 Mortise, hotel function 252 69.00 71.00 

7 1-3/8 253 

- 1-1/8 985T 

Mortise, thumbturn 

- 1-1/4 

986T 

83.00 85.00 

- 1 984D 

Dummy 

- 1-1/8 

985D 

32.00 34.00 

* Cylinders are furnished 5-pin G keyway, keyed differently unless otherwise specified. 

** Restricted sections see CYL-3. See keys & keying for standard keyways. Contact 877-671-7011 for availability. 

*** Hotel mortise cylinder are only offered as Master keyed or 6-pin 0-bitted and must be specified. If not specified, 0-bitted 

furnished. 

Notes: 1) MA cam provided unless otherwise specified. 

2) For 7-pin conventional add $11.00 

3) All mortise cylinders will be furnished with cam 5622-STO, except for MA381 function which will be supplied 

with 5620-STD and 5621-STD. See CYL-12 for additional available cams. 

4) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C. 

5) 984D, 985D not available in 629 and 630. 

6) Conventional mortise cylinder with Schlage C keyway are available with the following cams only, 02-069 & A7809. 

7) Add $9.00 (list) for Falcon restricted keyways. See page 8 for standard keyways. All others are restricted. Falcon 

conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys. 

Small Format Interchangeable Core Housings 

Cat. Number Length Pins Description 626 605 606 613 629 630 

C987-xx 1 3/8" 6 or 7 Mortise 

C988-xx 1 1/2" 6 or 7 Mortise 

$33.00 $35.00 

C990-xx 1 3/4" 6 or 7 Mortise 39.00 41.00 

C992-xx 2" 6 or 7 Mortise 41.00 43.00 

C977-xx Fits Adams Rite 6 or 7 Mortise, tapered head 35.00 37.00 

C997-xx 1 3/8" 6 or 7 Mortise, unassembled, less cam 26.00 28.00 

C262-xx 1 5/8" 6 or 7 Mortise, hotel function RH 

C265-xx 1 5/8" 6 or 7 Mortise, hotel function LH 

55.00 57.00 

Notes: 1) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied 


2) C977 is only furnished with 012667-001 Adams Rite Cam 



MA-7

MA-Series • Cylinder Options 

Conventional Cylinder options 

Description 

Specify 


Example: MA581P 


Example: MA581P6 


Example: MA581P7 


Example: MA581P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

Example: MA581CP6 (All other keying, not listed above) 


(per core) 

STD 

N/C 

$11.00 

N/C 








Description 

Specify 


G Suffix 

Example: MA581GD6 


BB Suffix 

Example: MA581BB6 


H Suffix 

Example: MA581HD6 


B Suffix 

Example: MA581BD 


BDC Suffix 

Example: MA581BDC 


(per core) 

$39.00 

28.40 

N/C 

3.50 



Note: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details 

MA-8 



MA-Series Strikes with Locks 

Strikes and Armor Fronts • MA-Series 


Description Lip Length Specify 605, 606, 613, 629, 630 

Standard - 1-3/4" Door Thickness 1-1/4" A8737-1 

Optional - 2" Door Thickness 1-7/16" A8737-2 N/C 

Optional - 2-1/4" Door Thickness 1-9/16" A8737-3 


Optional - 1-3/4" Door Thickness 7/8" A8737-5 

MA-Series Strikes Sold Separately 

605 606 613 

Description Lip Length Specify 626 625 630 

Standard - 1-3/4" Door Thickness 1-1/4" A8737-1 $16.00 $19.00 $24.00 

Optional - 2" Door Thickness 1-7/16" A8737-2 

Optional - 2-1/4" Door Thickness 1-9/16" A8737-3 21.20 24.20 29.20 


Optional - 1-3/4" Door Thickness 7/8" A8737-5 

MA-Series Armor Fronts (Scalps) Sold Separately 

Description Part Number 626 605 606 613 

625 630 

MA101, 321 

S77801-LL 

MA521 

S77804-LL 

MA161, 381, 411, 441, 561, 581, 851, 881, 551 

S77805-LL 

MA621 S77811-LL $31.80 $34.80 $39.80 

MA451, 641 

S77815-LL 

MA911, 921, 931, 941 

S77816-LL 

MA301, 311, 371, 541, 571, 431 

S77819-LL 

MA531 

S77820-LL 

Notes: 1) Armor front is included in complete MA lock 



MA-9

MA-Series • Cases and Trim 

MA-Series Lock Case 


A7801-xx MA101 $185.00 

A7831-xx MA161 175.00 

A7802-xx 

MA301 

A7819-xx MA311 205.00 

A7822-xx 

MA321 

A7814-xx 

MA371 

A7809-xx MA381 229.00 

A7830-xx 

MA411 

A7815-xx MA451 260.00 

A7804-xx MA521 229.00 

A7820-xx MA531 304.00 

A7821-xx 

MA541 

A7805-xx MA561, 441 

A7813-xx MA571, 431 229.00 

A7807-xx 

MA581 

A7808-xx 

MA621 

A7815-xx MA641 260.00 

A7806-xx MA551 229.00 

A7851-12-xx 

MA851 12V 

A7851-24-xx 

MA851 24V 

A7881-12-xx 

MA881 12V 

548.00 

A7881-24-xx 

MA881 24V 

A7829-xx 

MA911 

A7816-xx MA921, 931, 941 

167.00 

Notes: 1) xx Specify handing: RH= Right hand. LH= Left hand. RR = Right hand reverse. LR = Left hand reverse. 

(Example: A7801-RH). 

2) Does not include armor front 

MA-Series Lever & Knob Assemblies 

Part Number 

Description 

List Price 

605 606 613 

626 625 630 

AS76029-L/RH 

Avalon, sectional trim 

AS76140-L/RH 

Quantum, sectional trim 

AS76526-L/RH 

Sutro, sectional trim 

AS76280-L/RH 

Dane, sectional trim 

AS76100-L/RH Hana, sectional trim $102.00 $105.00 $110.00 

AE77029-L/RH 

Avalon, escutcheon trim 

AE77140-L/RH 

Quantum, escutcheon trim 

AE77526-L/RH 

Sutro, escutcheon trim 

AE77280-L/RH 

Dane, escutcheon trim 

AE77100-L/RH 

Hana, escutcheon trim 

Notes: 3) Specify finish and handing 

4) Lever assemblies include one lever assemblies with spring cage. 

5) Order escutcheon and rose separately 

MA-Series Rose 

List Price 

Part Number 

Description 

605 606 613 

626 625 630 

S76012 Rose, Gala $26.20 $29.20 $34.20 

AS75319 Thumbturn assembly for sectional trim for MA301, MA311 35.60 38.60 43.60 

MA321 when door thickness is less than 2" 

AS76319 Thumbturn Assembly for sectional trim for all functions except 35.60 38.60 43.60 

MA301, MA311, MA321 when door thickness is less than 2" 

AS7653 Emergency Turn for MA301, 311, 321 26.50 29.50 34.50 

Notes: 6) Specify finish 

MA-10 



MA-Series Escutcheons 

Trim, Screws and Parts • MA-Series 

Part Number 

Description 

List Price 

605 606 613 

626 625 630 

AE77012-OP 

Napa, Outside lever opening 

AE77012-OC 

Napa, Outside Cylinder and lever openings 

AE77012-OK Napa, Outside Cylinder only opening $61.90 $64.90 $69.90 

AE77012-OT 

Napa, Outside Emergency key and lever opening 

E77012-IP 

Napa, Inside lever opening 

E77012-IB 

Napa, inside Blank, no lever opening 

AE77012-IT Napa, Inside lever opeining with thumbturn attached 72.30 75.30 80.30 

E77012-IC Napa, Inside Cylinder and lever opening 61.90 64.90 69.90 

AE77012-IE Napa, Inside no lever opening with thumbturn attached 72.30 75.30 80.30 

E77012-IK Napa, Inside Cylinder only opening 61.90 64.90 69.90 


MA-Series Screw Packs 

Part Number 

Description 

List Price 

606 613 630 

S76300 

1-3/8" - 1-7/8" door thickness, sectional trim with levers 

S76301 

Over 1-7/8" - 2-1/2" door thickness, sectional trim with levers 

E77300 

1-3/8" - 1-7/8" door thickness, escutcheon trim with levers 

E77301 

Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with levers 

S76302 

1-3/8" - 1-7/8" door thickness, sectional trim with knobs 

S76303 Over 1-7/8" - 2-1/2" door thickness, sectional trim with knobs $20.30 

E77302 

1-3/8" - 1-7/8" door thickness, escutcheon trim with knobs 

E77303 

Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with knobs 

S76306 

Torx screw pack, sectional trim, no turn 

S76307 

Torx screw pack, sectional trim, with turn 

E77306 

Torx screw pack, escutcheon trim, standard 

E77307 

Torx screw pack, escutcheon trim, over 1-7/8" – 2-1/2" door thickness 


3) Non torx screw packs contains armor front screws, strike screws, trim screws, mortise screws, spindle, mounting posts 

4) Torx screw packs contain armor front, strike and trim screws only 

MA-Series Miscellaneous Parts 


PE1396 Dust Box, standard with lock $4.20 

005099-000 Metal Dust Box 8.30 

S76806 Spindles (2) for lever on standard door thickness or knob on 5.40 

door thickness 1-7/8" - 2-1/2" 

S76816 Spindles (2) for lever on door thickness 1-7/8" - 2-1/2" 5.40 

S76206 Spindles (2) for knob on standard door thickness 5.40 

S76802 Spindles (2) for connecting door, MA161 5.40 

AS5813 Mounting plate for use with no outside trim 14.40 



MA-11

MA-Series • Options 


Description 

Less each knob or lever 

Less each escutcheon 

Less each rose 


Less standard hotel cylinder 

Less armor front 

Less strike 

Specify 

LLL for knob/lever design 

Example: MA581P LLL/DG x DG 

LLL for escutcheon design 

Example: MA581P DN x DN/LLL 

LLL for rose design 

Example: MA581P DG x DG/LLL 

L suffix 

Example: MA581L DG 

L suffix 

Example: MA451L DG 

LLL for latch 

Example: MA581P DG 626 LLL 21315R 


Example: MA581P DG 626 20099 LLL 

Note: 1) MA-series locks ordered less all components will be furnished as lock cases. See MA-10 for part numbers. 

2) Sum of applicable deducts, use DG (Dane Gala) and specified finish for base price. 

Deduct from 

Lock Price 

$22.60 

24.20 

6.20 

55.00 

55.00 

20.50 

10.60 

Non-Standard Door Thickness 


Over 1 7/8" – 2 1/2" thick doors 

Door thickness and how door is extended 

Example: 2", EE 

$74.60 

Notes: 3) Must indicate how lock will be extended: Extended Inside (EI) on non-thumb turn functions only 

Extended Outside (EO) on all functions 

Extended Equally (EE) on all functions 

Abrasive 

6 Prefix 


Example: 6 DG for Dane Gala* 

*Not available in 613 

$51.60 

Knurling 

8 Prefix 


Example: 8 DG for Dane Gala** 

**Only available in 626 finish and levers only 

$77.40 

Notes: 4) Extended lead times apply. 

Lead Wrap 


9 Prefix Example: 9 DG for Dane Gala $166.00 

Notes: 5) Extended lead times apply. 

Indicators 


OCCUPIED/VACANT message indicator. 

For Sectional and Escutcheon Trim 

Add M Suffix to trim. 

Example: DGM for Dane Gala 

Notes: 6) Available on the following functions: MA301, MA311, MA321, MA371, MA431, MA451, MA541, MA571, MA641, 

MA921, MA931, MA941 on the outside of door. 

Available on the following functions: MA441 on the inside of door. 

$84.50 

MA-12 



Trim Packages • MA-Series 

MA-Series Trim Packages 

Cat. 

Number Function Specify Style 

List Price 

605 606 613 

626 625 630 

TP 50 S 101, 371, 381, 411, 431, 441, 521, 551, 561, 581, 851, 881 Dane, Sutro, Avalon, Quantum, Hana $276.00 $282.00 $292.00 

TP 60 C 301, 311, 321 Dane, Sutro, Avalon, Quantum, Hana 302.00 308.00 318.00 

TP 70 T 451, 531, 541, 571, 621, 641 Dane, Sutro, Avalon, Quantum, Hana 322.00 328.00 338.00 

TP 55 E 101 Dane, Sutro, Avalon, Quantum, Hana 333.00 339.00 349.00 

TP 65 E 311, 321, 301 Dane, Sutro, Avalon, Quantum, Hana 

TP 75 E 431, 441, 411, 371, 381 Dane, Sutro, Avalon, Quantum, Hana 348.00 354.00 364.00 

TP 85 E 551, 881, 851, 581, 561, 521 Dane, Sutro, Avalon, Quantum, Hana 

TP 95 E 641, 541, 531, 571, 621, 451 Dane, Sutro, Avalon, Quantum, Hana 

Notes: 

S = Sectional, No Thumbturn, up to 2 cylinders 

C = Sectional, Thumbturn, no cylinder 

T = Sectional, Thumbturn & cylinder 

E = Escutcheon Trim 

1) Specify Lever/Knob style and finish 

2) Contains inside and outside trim, screw pack with mounting hardware 



MA-13

MA-Series • Full Body Mortise Deadlocks 

ANSI-A156.13, 

SERIES 1000, GRADE 1 

MA Series Mortise Deadlocks (No Knob or Lever Trim) 

Function 

Description 

List Price 

605 606 613 

626 625 630 

MA911P Classroom Deadlock $307.00 $313.00 $323.00 

MA921P Deadlock by key outside 275.00 281.00 291.00 

MA931P* Deadlock by key from either side, Double Cylinder lock 307.00 313.00 323.00 

MA941P Single Cylinder, Thumbturn inside 375.00 381.00 391.00 

*CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in 


Notes: 1) If ordered with Napa Escutcheon Trim - add $105 (both sides will be included) 

2) Deadlock case comes with appropriate scalp (front). 

MA-14 



Introduction 


Function Chart 

RU-2 

Complete Lock Pricing 

RU-3 

Order Detail 

RU-4 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

Cylinder Requirements . . . . . . . . . . . . . . . .RU-5 

Competitor Cylinders . . . . . . . . . . . . . . . . . .RU-6 

Parts 

RU-7 

Complete Cylinders . . . . . . . . . . . . . . . . . . .RU-7 

Interchangeable Core Options . . . . . . . . . .RU-7 

Conventional Cylinder Options . . . . . . . . . .RU-7 

Locks Less Components . . . . . . . . . . . . . . .RU-8 

Non-Standard Door Thickness . . . . . . . . . .RU-8 

Tactile Warning . . . . . . . . . . . . . . . . . . . . . .RU-8 

Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . .RU-8 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-9 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-9 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10 

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10 

Spring Cage Conversion Kit . . . . . . . . . . .RU-10 

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . .RU-11 

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11 

Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . .RU-12 


RU 501 P D 

Latch Suffix 

D = Deadlatch 


RU-Series 


B = Less SFIC 





Core 

J = Full Size IC 

(Specify Manufacturer) 



to 5 chambers 


to 6 chambers 

P7 = 7-Pin Cylinder 

to 7 chambers 


Schlage C 

Function 

See RU-2 

Lock Series 



Code 

Description 






Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box 



Keys 




RU-1

RU-Series • Functions 

ANSI A156.2, Series 2000 Grade 1 

Retrofit Locks 

FALCON ANSI 

RU101 F36 Passage/Closet Latchset 


RU301 F37 Privacy/Bedroom/Bath Lock 

Latch bolt by levers. Outside lever locked 

by push button in inside lever. Rotating 

inside lever or closing door releases push 

button. Emergency release in outside 

lever unlocks door. 

RU381 F45 Classroom Security Lock 

Latchbolt operated by lever from either 

side except when key from inside lever 

locks outside lever. When outside lever is 

locked, latchbolt retracted by key in 

outside lever or by turning inside lever. 

RU411 

Asylum Lock* 

Deadlocking latch bolt by key from 

either side at all times. Both levers 

inoperable. 

RU501 F41 Entry Lock 


locks outside lever until unlocked by key 

or by rotating inside lever. 

Inside lever always free. 

Deadlocking latch bolt. 

Retrofit Locks 

FALCON ANSI 

RU521 F40 Office Lock 

Turn button locking. Turning button 

locks outside lever requiring use of key 

until button is manually unlocked. Inside 

lever always free. Deadlocking latch bolt. 

RU561 F42 Classroom Lock 

Deadlocking latch bolt by levers. Outside 

lever is locked by key in outside lever. 


RU571 F48 Dormitory Lock 


when locked by push button in inside 


unlocks lever and releases button. 

Closing door releases push button. Inside 

lever always free. 

RU581 F44 Storeroom Lock 

Deadlocking latch bolt by lever inside or 

key outside. Outside lever is inoperable. 


RU851 

Storeroom (Electrified-Fail Safe) 


side except when outer lever is 

electrically locked. When outer lever is 

locked (inoperable), latch bolt retracted 

by key in cylinder outside. 24 volt DC 

.185 Amps, continuous duty. 

RU511 F40/F41 Entry/Office Lock 




manually unlocked. Push button locking. 

Pushing button locks outside lever until 

unlocked by key or by rotating inside 

lever. Inside lever always free. 


RU881 

Storeroom (Electrified-Fail Secure) 

Deadlocking latch bolt operated by lever 

inside at all times. Outside lever 

inoperable until electrically unlocked, 

then latch bolt from either side. When 

outside lever is inoperable, latch bolt 

retracted by key in cylinder outside. 

24 volt DC .185 Amps, continuous duty. 




RU-2 



Grade 1 Heavy Duty Unit Lock Retrofit 

Key-In-Lever Lockset ANSI- A156.2, GRADE 1 

Complete Locks • RU-Series 

D (Dane) 

Q (Quantum) 

Key-In-Lever 


D Q 

D 

Function Description 626 613 


RU501PD Entry 

RU511PD Entry/Office 

RU521PD Entry/Office 

RU561PD Classroom $624.00 $654.00 

RU571PD Dormitory 

RU581PD Storeroom 

Single Cylinder Functions - Electrified 

RU8511PD Elec. Storeroom – Fail Safe 

RU8811PD Elec. Storeroom – Fail Secure 

$944.00 $974.00 


RU381PD Classroom Security 

RU411PD Asylum 

$688.00 $718.00 

Double cylinder locks on residences and any door in any structure which is 

*CAUTION: used for egress are a life safety hazard in times of emergency and their 

use is not recommended. Installation should be in accordance with existing 

codes only. 


RU101S Passage $518.00 $548.00 

RU301S Privacy 586.00 616.00 



RU-3

RU-Series • Latches, Strikes 


Backset Description Specify Add to Lock Price 

Latch height 1-3/4" 314691 

Latch height 2-1/16" 314692 

Latch height 2-5/8" 314693 

N/C 

2-3/4" Latch height 2-11/16" 314694 

Latch height 1-3/4" x 3/4 Proj. 315491 

Latch height 2-1/16" x 3/4 Proj. 315492 $122.00 





ANSI, 1-1/4" x 4-7/8" standard 5164 

Early Corbin Russwin single door 031471 N/C 

Early Corbin Russwin single door 

31471S 

Early Corbin Russwin pair doors 031472 

Yale Mono Pair of Doors 031473 

Early Corbin 031474 

$73.30 

Early Russwin Unit Lock 031477 

1" deep for 4-7/8" high ANSI strike, dust box 005099-000 30 N/C 

3/4 deep for 3-1/4" high strike, dust box 031453-000 30 1.70 


Finishes: 613, 626 

Backset Description Spring Latch Dead Latch List Price 

Latch height 1-3/4" x 1/2 Proj. A31469-001 A31469-01D $83.10 

Latch height 2-1/16" x 1/2 Proj. A31469-002 A31469-02D 109.00 

Latch height 2-5/8" x 1/2 Proj. A31469-003 A31469-03D 

2-3/4" Latch height 2-11/16" x 1/2 Proj. A31469-004 A31469-04D 

115.00 

Latch height 1-3/4" x 3/4 Proj. - A31549-01D 

Latch height 2-1/16" x 3/4 Proj. - A31549-02D 164.00 




Finishes: 613, 626, 630 


ANSI, 1-1/4" x 4-7/8" standard 005164-000 $11.40 

Early Corbin Russwin single door 031471-000 

Early Corbin Russwin single door 031471-001 

13.60 

Early Corbin Russwin pair doors 031472-000 

Yale Mono Pair of Doors 1-3/16" 031473-000 

Early Corbin 031474-000 

73.30 

Early Russwin Unit Lock 031477-000 

1" deep for 4-7/8" high ANSI strike, dust box - 005099-000 30 2.60 

3/4 deep for 3-1/4" high strike, dust box - 031453-000 30 1.70 

RU-4 



Order Detail • RU-Series 

Ordering Format 

Catalog Trim Latch Strike 

Qty. Number Design Finish Height Part No. Hand Cylinder Other Requirements 

8 RU521 D 626 1 3 /4" 031471-000 RH Less IC-CR 

Cylinder 

When evaluating the retrofit requirements for an RU Series lockset, the following ques tions need to be answered. 

1 Which manufacturer’s unit lock is currently installed? 

❏ Russwin ❏ Corbin ❏ Corbin Russwin ❏ Yale ❏ Falcon 

➁ What is the existing latch height? To determine latch height measure existing latch height as shown here: 

Latch heights currently identified and the manufacturer: 

1. 1 3/4" Most Corbin & Russwin sold 1949 thru current; Yale 6200 

2. 2 1/16" Corbin, Falcon 

3. 2 5/8" Certain Corbin (0)2400 Series sold 1913-1953 

4. 2 11/16" Russwin 2100 & 2800 Series sold 1904-1968 

DOOR LA TCH 

CUT OUT HEIGH 

3 What is the existing strike condition? 

1-1/4" 

1-1/4" 

5/8" 

1-1/8" 

9/16" 

4-1/8" 

4-7/8" 

4-5/32 " 

4 " 

4-13/16 " 

3-3/8" 

1-3/4" 

2-5/8" 

3-11/32" 

1-5/6" 

1-15/6" 

1-1/2" 

2-1/8" 

1-3/8" 

1-15/16" 

0005164-000 031477-000 

Early Russwin 

Unit Lock 

031474-000 

Early Corbin 

1-1/8" 9/16" 

1-1/8" 9/16" 

1-3/8" 11/16" 

1-3/8" 11/16" 

2-5/8" 

3-1/4" 

2-5/8" 

3-1 

2-5/8" 

3-1/4 " 

2-5/8" 

3-1/4 " 

2-1/4" 

2-1/4" 

2-1/4" 

2-1/4" 

1-9/16" 

2-1/8" 

1-9/16" 

2-1/8" 

1-1/8" 

1-7/8" 

1-1/8" 

1-7/8" 

031471-000 

Note: Strike, Door and Lock 

Same Center Line 

Early Corbin Russwin 

Single Door 

031471-001 

Note: Strike Center Line is not 

the Same as Door and Lock 


Single Door 

031472-000 


Pair of Doors 

031473-000 

Yale Mono 

Pair of Doors 

4 What is the existing door thickness? 

Locks are for 1-3/4" thick doors only. 



RU-5

RU-Series • Order Detail Cont. 

Specify cylinder requirements. (Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for 

Falcon interchangeable core unless otherwise specified.) 

Falcon IC 

❏ 6-pin 

❏ 7-pin 

Falcon Standard 

❏ 6-pin 

❏ 7-pin 

With Cylinder 

specify keyway 


Competitors’ Keyways - 

6-pin Standard Cylinder* 

❏ Corbin - 60, 0 Bitted, KD 

❏ Russwin - D1, 0 Bitted, KD 

❏ Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys) 

❏ Schlage - C, 0 Bitted, KD, KA4 

❏ Schlage - E, 0 Bitted 

❏ Yale - 8 (Para), 0 Bitted, KD 

Less Cylinder - Prepared to Accept** 

❏ Falcon IC 


❏ 6-pin 

❏ 7-pin 

Unit / Mono Lock Cylinders 

❏ Falcon Standard (R Series old small plug) 6-pin 

❏ Corbin Russwin Unit Lock 

(2000-052) - Master Ring not available 

❏ Medeco Unit Lock Retrofit Cylinder 

(20W5005) - Corbin Russwin Unit Lock 


(20W0500) - Yale 6200 Mono Lock 

❏ Yale Mono Lock (1801) and later models 

Competitors’ Standard Cylinders 

❏ Assa (65611 or 65661) 6-pin 

❏ Corbin Russwin (2000-034 / CL3400) 6-pin- 

Master Ring not available 

❏ Medeco (20W200V3) 6-pin 

- tailpiece supplied by Medeco 

- Falcon / Schlage style 

❏ Peaks (Kaba) 6-pin 

❏ Primus (Schlage) 6-pin 

❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available 

❏ Schlage 6-pin 

❏ Yale (1801) 6-pin - Bicentric not available 

Competitors’ IC 

❏ Arrow 6, 7-pin 

❏ Assa (70600IC & V70600IC) 6-pin 

❏ Best 6, 7-pin 

❏ Corbin Russwin (8000) 6-pin 

❏ Corbin Russwin (8000-7) 7-pin 

❏ InstaKey 

❏ Medeco 31 Series 6-pin 


❏ Medeco Keymark 6, 7-pin 

❏ Peaks (Kaba) 6, 7-pin 


❏ Sargent (6300) 6-pin 


❏ Yale (1210) 6-pin 

* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted. 

RU-6 



Competitors’ I-Cores & Competitors’ Standard Cylinder • RU-Series 

Compatibility with Competitors’ I-Cores 


Falcon’s standard interchangeable core option. Specify 6 or 7-pin. 

Locksets with this option also accept Schlage SFIC, Arrow (in clud ing Flex 

Core), Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark and 

KSP cores. 

The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified: 

Assa 

Corbin 

Russwin 

Medeco 

32 

Medeco 

31 

Sargent 

6300 

Schlage 

Yale 

Assa 

old and new style 

Specify IC-AS 


8000 or 8000-7 

Specify IC-CR6 

or IC-CR7 

Medeco 

32 Series 6-pin 

Specify IC-ME 

Medeco 


Specify IC-YA6 

Sargent 

6300 

Specify IC-SA 

Schlage 6-pin 

including Primus 

Specify IC-SC 

Yale 6-pin 


Compatibility with Competitors’ Standard Cylinders 

The RU Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified. 

The RU Series accepts the following competitors’ standard 6-pin cylinders. 

❏ Assa (65611 or 65661) 6-pin 

❏ Corbin Russwin (2000-034 / CL3400) 6-pin - 












RU-7

RU-Series • Cylinder Options 

RU Series • Complete Cylinders 


5 pin cylinder RU series (except 381 IS, 571) A23151-05 

5 pin cylinder RU series 381 IS A23151-06 

5 pin cylinder RU series 571 A23151-07 $38.00 


6 pin cylinder RU series 381 IS A23161-06 

6 pin cylinder RU series 571 A23161-07 


7 pin cylinder RU series 381 IS A23171-06 51.00 

7 pin cylinder RU series 571 A23171-07 


Description Specify Add to Lock 

Price (per core) 


Example: RU581P 


Example: RU581P6 


Example: RU581P7 


Example: RU581P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

Example: RU581CP6 (All other keying, not listed above) 


STD 

N/C 

$13.70 

N/C 

Note: 1) Finishes: 606 and 626 only 





Interchangeable Core and Small Format Construction Core 



G Suffix 

Example: RU581GD6 


BB Suffix 

Example: RU581BB6 


H Suffix 

Example: RU581HD6 


B Suffix 

Example: RU581BD 

Less Full Size core 

J Suffix 

Example: RU581JD SCH x DAN 


BDC Suffix 

Example: RU581BDC 






$39.00 

28.40 

N/C 

3.50 

RU-8 



Less Components, Thick Door, Tactile Warning, Lead Lining • RU-Series 


Description Specify Deduct from 


Less latch 

Less strike 

L suffix 

Example: RU581LD DAN 

LLL suffix 

Example: RU581PD DAN 626 LLL/5164 

LLL suffix 

Example: RU581PD DAN 626 314691 LLL 

Lock Price 


Description Specify Add to 

Abrasive 

Note: 1) Not available on 613. 



$38.00 

51.20 

7.50 

Lock Price 

Lead Lining 


Lead lining 



$51.20 

Lock Price 

$226.00 



RU-9

RU-Series • Trim 

Levers, Conventional Cylinder 


030742-000 Dane lever, closed 

030742-001 Dane lever, open 

$40.50 

030744-000 Quantum lever, closed 

030744-001 Quantum lever, open 

030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 48.10 

030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit) 

030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 54.10 

030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale) 

A30753-00* 

Inside lever w/set screw, closed 

33.10 

A30753-01* 

Inside lever w/set screw, open 

A31544-00* Inside lever w/set screw, closed 851/881 82.70 

* Specify design prefix D (Dane), Q (Quantum) 

Levers and related parts, Small Format and Large Format Interchangeable Core 


030742-002 Lever, Dane SFIC $40.50 

030744-002 Lever, Quantum SFIC 

030926-002 Lever, Dane IC, ASSA, Medeco, Yale 86.60 

030926-003 Lever, Quantum IC, ASSA, Medeco, Yale 

030927-002 Lever, Dane IC, Schlage 86.90 

030927-003 Lever, Quantum IC, Schlage 

030928-002 Lever, Dane IC, Corbin Russwin 84.00 

030928-003 Lever, Quantum IC, Corbin Russwin 

030930-002 Lever, Dane IC, Sargent 79.00 

030930-003 Lever, Quantum IC, Sargent 

Roses 


031452-000 Rose, square $27.60 

Note: 1) Dane available in 626 and 613 Quantum available in 626. 

RU-10 



Miscellaneous Parts • RU-Series 



022104-000-30 Short Slide Catch $ 0.68 

022105-000-30 Slide Catch 2.00 

022106-002-55 Retractor 2.50 

022108-000-60 Retractor Spring 4.90 

022112-000-30 Retainer, Retractor Spring 1.40 

022986-001-50 Retractor Insert 0.52 

030703-000-30 Inner Spindle, Passage and Button Functions 21.40 

030704-002-30 Lever Stop Plate 3.10 

030709-000-60 Clutch Spring 0.32 

030712-000-30 Mounting Plate, Inner 3.00 

030712-001-30 Mounting Plate, Outer 2.60 

030718-000-30 Key Spindle, std 

030718-001-30 Key Spindle, IC 

3.90 

030722-000-30 Dogging Bar 2.50 

030724-000-30 Lever Retaining Ring 0.52 

030726-000-30 Flanged Nut 6.00 

030726-007-30 Flanged Nut, Inner Electrified 8.40 

030728-000 Push Button Cap 7.80 

030733-000-55 Spindle Inner 2.80 

031416-000-70 Solenoid, Fail Safe RU851 312.00 

031511-000-30 Hex Nut, 1/-28 Special 6.60 

031514-000-30 Solenoid Mount 8.50 

031519-000-30 Inner Spindle, RU851/881 33.80 

1387 Hex Key – 1/8" with Looped Handle 12.70 

1388 Hex (castle) Not installation tool 29.30 

A30746-000-00 Hub & Housing Assembly 12.50 

A30747-000-00 Hub & Plate Assembly 11.50 

A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 82.00 


A30905-001-00 

Spindle & Driver Assembly, IC 

A30905-060-00 Spindle & Driver Assembly, 6 Pin 46.00 

A30906-070-00 

Spindle & Driver Assembly, 7 Pin 

A30913-000-00 

Key Spindle Assembly, Inner Std. 

A30913-001-00 

Key Spindle Assembly, Inner IC 

139.00 

Q330-272 RU Lock Spring Cage Kit (for all functions except RU101 and RU301) 

Q330-273 RU Lock Spring Cage Kit (RU101 and RU301) 

33.00 

Screws 


002762-000 RU latch screw 606, 613, 626 8-32 x3/8 $ 0.24 

002770-016-30 Insert screws – 10-32 x 1 0.38 

021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.40 

024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.22 

030755-005-30 Type D screw – 8-32 x 5/16" 0.28 

030831-004-30 Set screw – 1/4-20 x 1/4" 0.46 

031533-006-30 Self tap screw – 8-32 x3/8" 0.34 

031541-006-30 Mounting plate screws – 8-32 x 1/2" 0.36 



RU-11

RU-Series • Cylinder & IC Parts 

Tailpieces for Conventional Cylinders 

Cylinder Std. Functions RU381 Inside RU571 Price 

Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $16.50 pkg. of 10 

Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 16.50 pkg. of 10 

Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 8.60 each 

Yale1801, 5801 030917-001-30 030917-003-30 030917-005-30 24.50 each 

Corbin Russwin 030994-001-30 030994-003-30 030994-005-30 46.10 

*Assa 65611 and 65661; Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece; 

IC Throw Members (Tailpieces) 

Core Type Std. Functions RU381 Inside RU571 Price 

Falcon 6-pin* 030739-000-30 030739-002-30 030739-000-30 $1.70 

Falcon 7-pin* 030739-001-30 030739-003-30 030739-001-30 1.70 

Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 5.30 

Corbin Russwin 8000-7 (7-pin) 031468-001-30 031468-003-30 031468-005-30 5.30 

Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-004-00 4.40 

Schlage full size, including Primus 031467-000-30 031467-002-30 031467-004-30 10.70 

Yale and Medeco 31 Series 6-pin 030917-001-30 030917-003-30 030917-005-30 25.10 

*Arrow, Best, InstaKey. Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration. 

RU-12 



Introduction 


Function Chart T-2 

Complete Lock Pricing T-3 

Options & Parts T-4 

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-4 

Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-5 

Order Detail . . . . . . . . . . . . . . . . . . . . . . . . . .T-6 

Competitor Cylinders . . . . . . . . . . . . . . . . . . .T-7 

Locks Less Components . . . . . . . . . . . . . . . .T-8 

Non-Standard Door Thickness . . . . . . . . . . . .T-8 

Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . .T-8 

Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . . . .T-8 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

Spring Cage Conversion Kit . . . . . . . . . . . . .T-10 

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . . .T-11 

Chassis Assemblies . . . . . . . . . . . . . . . . . . .T-12 

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-12 


T 501 P D 

Latch Suffix 

D = Deadlatch 


T-Series 


B = Less SFIC 





Core 

J = Less FSIC (designate 

cylinder manufacturer) 



to 5 chambers 


to 6 chambers 


to 7 chambers 


Schlage C 

Function 

See T-2 

Lock Series 



Code 

Description 







Certification 

Latch 

Strike 

Cylinder 

Door Range 

Keys 

ANSI A156.2, Series 4000, Grade 1, UL Listed for 3-Hour fire door 

1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset 

1-1/4" x 4-7/8", ANSI, Square corner, no box 

6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD) 

1-3/4" - 2-1/8" standard 




T-1

T-Series • Functions 



FALCON ANSI 

T101 F75 Passage/Closet Latchset 



FALCON ANSI 

T521 F81 Office Lock 


locks outside lever requiring use of key 


lever always free. Deadlocking latch bolt. 

T291 

Privacy Hospital Lock 

Latch bolt by levers. Outside lever 


Rotating inside lever, closing door, or 

turning emergency release turn button 

on outside, release push button. 

Inside is always free for egress. 

T301 F76 Privacy Lock 

Latch bolt by levers. Outside lever locked 

by push button in inside lever. Rotating 

inside lever or closing door releases push 


lever unlocks door. 

T351 

Closet Lock 

Deadlocking latch bolt by turn knob 

inside or lever outside except when 

outside lever is locked by key. 

T561 F84 Classroom Lock 


lever is locked by key in outside lever. 


T571 F90 Dormitory Lock 




unlocks outside lever and releases button. 


lever always free. 

T581 F86 Storeroom Lock 

Deadlocking latch bolt by lever inside or 

key outside. Outside lever is inoperable. 


T381 F88 Classroom Security Lock 

Latchbolt operated by lever from either 

side except when key from inside lever 

locks outside lever. When outside lever is 

locked, latchbolt retracted by key in 

outside lever or by turning inside lever. 

T851 

Storeroom (Electrified – Fail Safe) 


side except when outer lever is 

electrically locked. When outer lever is 

locked (inoperable), latch bolt retracted 

by key in cylinder outside. 24 volt DC 

.185 Amps, continuous duty. 

T411 F87 Asylum Lock* 


in lever from either side. Both levers 

always inoperable. 

T501 F82 Entry Lock 


locks outside lever until unlocked by key 

or by rotating inside lever. Inside lever 

always free. Deadlocking latch bolt. 

T881 

T12 

Storeroom (Electrified – Fail 

Secure) 


inside at all times. Outside lever 

inoperable until electrically unlocked, 

then latch bolt from either side. When 

outside lever is inoperable latch bolt 

retracted by key in cylinder outside. 24 

volt DC .185 Amps, continuous duty. 

Dummy Trim 

Single Trim-surface mounted rigid lever. 

T511 F109 Entry/Office Lock 







lever. Inside lever always free. 


* Caution: Double cylinder locks on residences and 

any door, in any structure, which is used for egress are 

a life safety hazard in times of emergency and their 

use is not recommended. Installation should be in 

accordance with existing codes only. 

T-2 



Grade 1 Extra Heavy Duty Cylindrical Locksets 


Complete Locks • T-Series 

A (Avalon) D (Dane) Q (Quantum) 

Key-In-Lever 


A D Q 

605 



T351PD Closet 

T501PD Entry 

T511PD Entry/Office 

T521PD Office 

T561PD Classroom $349.00 $361.00 $379.00 

T571PD Dormitory 

T581PD Storeroom 

T851PD Elec. Storeroom – Fail Safe 

T881PD Elec. Storeroom – Fail Secure 

$638.00 $650.00 $668.00 


T381PD Exit Security 

T411PD* Asylum 

$410.00 $422.00 $440.00 




T101S Passage $251.00 $263.00 $281.00 

T291S Hospital/Grade School Privacy 

T301S Privacy 

314.00 326.00 344.00 

Dummy Trim 

T12 Half Dummy $120.00 126.00 136.00 



T-3

T-Series • Cylinder Options 

T Series • Complete Cylinders 


5 pin cylinder T series (except 381 IS, 571) A23151-05 

5 pin cylinder T series 381 IS A23151-06 

5 pin cylinder T series 571 A23151-07 


$38.00 






51.00 





Example: T581P 


Example: T581P6 


Example: T581P7 


Example: T581P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

Example: T581CP6 (All other keying, not listed above) 


Note: 

1) Finishes: 606 and 626 only 











Less Full Size core 




Note: 

STD 

N/C 

$11.00 

N/C 


G Suffix 

Example: T581GD6 $39.00 

BB Suffix 

Example: T581BB6 

H Suffix 

28.40 

Example: T581HD6 

B Suffix 

Example: T581BD 

N/C 

J Suffix 

Example: T581JD SCH x DAN 

BDC Suffix 

3.50 

Example: T581BDC 


T-4 



Cylinder Parts • T Series 

Tailpieces for Conventional Cylinders 

Cylinder Std. Functions T381 Inside T571 Price 

Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $16.50 pkg of 10 

Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 $16.50 pkg of 10 

Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 $8.60 each 

Yale 1801, 5801 030917-001-30 030917-003-30 030917-005-30 $24.50 each 

Corbin Russwin 030994-001-30 030994-003-30 030994-005-30 46.10 

* Assa 65611 and 65661, Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece. 

IC Throw Members (Tailpieces) 

Cylinders Std. Functions T381 Inside T571 Price 

Falcon 6-pin* 030739-000-30 030739-002-30 030739-000-30 $1.70 

Falcon 7-pin* 030739-001-30 030739-003-30 030739-001-30 1.70 

Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 5.30 

Corbin Russwin 8000-7 (7-pin) 031468-001-00 031468-003-30 031468-005-30 5.30 

Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-004-00 4.40 

Schlage Full Size, Including Primus 031467-000-30 031467-002-30 031467-004-30 10.70 

Yale and Medeco 31 Series, 6-pin 030917-001-30 030917-003-30 030917-005-30 25.10 

* Arrow, Best, InstaKey, Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration. 



T-5

T-Series • Order Detail 

Specify cylinder requirements. (Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for 

Falcon interchangeable core unless otherwise specified.) 

Falcon IC 

❏ 6-pin 

❏ 7-pin 


❏ 6-pin 

❏ 7-pin 

With Cylinder 



Competitors’ Keyways - 

6-pin Standard Cylinder* 

❏ Corbin - 60, 0 Bitted, KD 

❏ Russwin - D1, 0 Bitted, KD 

❏ Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys) 

❏ Schlage - C, 0 Bitted, KD, KA4 

❏ Schlage - E, 0 Bitted 

❏ Yale - 8 (Para), 0 Bitted, KD 

Less Cylinder - Prepared to Accept** 

❏ Falcon IC 


❏ 6-pin 

❏ 7-pin 

Unit / Mono Lock Cylinders 

❏ Falcon Standard (R Series old small plug) 6-pin 

❏ Corbin Russwin Unit Lock 

(2000-052) - Master Ring not available 


(20W5005) - Corbin Russwin Unit Lock 


(20W0500) - Yale 6200 Mono Lock 

❏ Yale Mono Lock (1801) and later models 

Competitors’ Standard Cylinders 

❏ Assa (65611 or 65661) 6-pin 

❏ Corbin Russwin (2000-034 / CL3400) 6-pin- 










Competitors’ IC 

❏ Arrow 6, 7-pin 

❏ Assa (70600IC & V70600IC) 6-pin 

❏ Best 6, 7-pin 

❏ Corbin Russwin (8000) 6-pin 

❏ Corbin Russwin (8000-7) 7-pin 

❏ InstaKey 



❏ Medeco Keymark 6, 7-pin 

❏ Peaks (Kaba) 6, 7-pin 


❏ Sargent (6300) 6-pin 


❏ Yale (1210) 6-pin 

* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted. 

T-6 



Competitors’ I-Cores & Competitors’ Standard Cylinder • T Series 

Compatibility with Competitors’ Standard Cylinders 

The T Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified, and accepts the following 

competitors’ standard 6-pin cylinders. 

❏ Assa (65611 or 65661) 6-pin 

❏ Corbin Russwin (2000-034 / CL3400) 6-pin - 





❏ 

❏ 

❏ 

❏ 

❏ 

Peaks (Kaba) 6-pin 

Primus (Schlage) 6-pin 

Sargent (6, 7 & 10 Line) 6-pin - Keso not available 

Schlage 6-pin 

Yale (1801) 6-pin - Bicentric not available 

Compatibility with Competitors’ I-Cores 


Falcon’s standard interchangeable core option. Specify 6 or 7-pin. 

Locksets with this option also accept Schlage SFIC, Arrow (in clud ing Flex 

Core), Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark and 

KSP cores. 

The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified: 

Assa 

Corbin 

Russwin 

Medeco 

32 

Medeco 

31 

Sargent 

6300 

Schlage 

Yale 

Assa 

old and new style 

Specify IC-AS 


8000 or 8000-7 

Specify IC-CR6 

or IC-CR7 

Medeco 


Specify IC-ME 

Medeco 31 



Sargent 

6300 

Specify IC-SA 

Schlage 6-pin 

including Primus 

Specify IC-SC 

Yale 6-pin 

Medeco 31 Series 




T-7

T-Series • Special Options 



Less each lever 


Less latch 

Less strike 

LLL 

Example: T581PD LLL/DAN 

L suffix 

Example: T581LD DAN 

LLL 

Example: T581PD DAN 626 LLL/5164 

LLL 

Example: T581PD DAN 626 98535 LLL 

Lock Price 



Lock Price 

Door thickness 1-3/8" to 1-3/4" A30775-000-00 for thin door shims $10.60 

Note: 1) T Series lockset will accommodate up to a 2-1/8" thick door prep standard. 



Abrasive Strip* 

Note: 2) Outside lever only is coated unless otherwise specified. 

* Not available in 613. 



$20.30 

38.00 

31.60 

7.50 

Lock Price 

Lead Lining 


Lead lining 



$49.50 

Lock Price 

$226.00 

T-8 



Latches and Strikes • T Series 


Finishes: 606, 613, 630 

Backset Description Specify List Price 

2-3/4" 

Square corner, 1-1/8" x 2-1/4", std. 98535 

9/16" radius corner, 1-1/8" x 2-1/4" 98538 N/C 

Square corner, 1" x 2-1/4" 92330 

1/4" Radius round corner, 1" x 2-1/4" 92331 

10.90 


2-3/8"* 


5" Backset Link for 2-3/4" Backset Latch A22161-005-00 34.60 




ANSI, 1-1/4" x 4-7/8" standard 1-5/16” 5164 N/C 

Square corner, full lip 1-5/8" x 2-1/4" 1” 01-049 N/C 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” 01-048 N/C 

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16” 5185 N/C 

ANSI dust box 1" deep, steel - 005099-000-30 N/C 

ANSI 1-1/4” x 4-7/8” 7/8” 5161 N/C 

Radius T Strike, 1-1/8” x 2-3/4” 9/16” 5185-4 N/C 


Finishes: 606, 613, 630 

Backset 

Latch Face 2-3/8" 2-3/4" List Price 



1" Spring Latch – 1/4" Radius A92321-000 A92331-000 

1" Deadlatch – 1/4" Radius A92321-00D A92331-00D 

$48.80 

1-1/8" Spring Latch A98535-000 

1-1/8" Deadlatch A98535-00D 

1-1/8" Spring Latch – 9/16" Radius - A98538-000 

1-1/8" Deadlatch – 9/16" Radius A98538-00D 




Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 $3.20 


Q001-048 

1” 


3.50 

ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 005164-000 11.40 


ANSI 1-1/4” x 4-7/8” 7/8” 005161-000 17.00 

Radius T Strike, 1-1/8” x 2-3/4” 9/16” A05185-004 3.50 




T-9

T-Series • Levers and Parts 

Levers, Conventional Cylinder 


030740-000 Avalon lever, closed 

030740-001 Avalon lever, open 

030742-000 Dane lever, closed 

030742-001 Dane lever, open 

$40.50 

030744-000 Quantum lever, closed 

030744-001 Quantum lever, open 

030929-001 Lever, Avalon open (Corbin Russwin, Medeco, Yale unit) 

030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 48.10 

030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit) 

030996-001 Lever, Avalon open (Sargent 6, 7 & 10 line, Yale) 

030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 54.10 

030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale) 

A30753-00* 

Inside lever w/set screw, closed 

33.10 

A30753-01* 

Inside lever w/set screw, open 

A31544-00* Inside lever w/set screw, closed 851/881 82.70 

* Lever design must be specified. D (Dane) Q (Quantum) A (Avalon) 

Levers, Small and Large Format Interchangeable Core 


030740-002 Lever, Avalon SFIC 

030742-002 Lever, Dane SFIC $40.50 

030744-002 Lever, Quantum SFIC 

030926-001 Lever, Avalon IC, ASSA, Medeco, Yale 

030926-002 Lever, Dane IC, ASSA, Medeco, Yale 86.60 

030926-003 Lever, Quantum IC, ASSA, Medeco, Yale 

030927-001 Lever, Avalon IC, Schlage 

030927-002 Lever, Dane IC, Schlage 87.10 

030927-003 Lever, Quantum IC, Schlage 

030928-001 Lever, Avalon IC, Corbin Russwin 

030928-002 Lever, Dane IC, Corbin Russwin 84.00 

030928-003 Lever, Quantum IC, Corbin Russwin 

030930-001 Lever, Avalon IC, Sargent 

030930-002 Lever, Dane IC, Sargent 90.00 

030930-003 Lever, Quantum IC, Sargent 

Roses 

Part Number Description List price 

626 605 606 613 

030706-002 Rose cover $19.50 $22.50 $27.50 

Note: 1) When ordering levers or roses, specify finish. 

T-10 



Levers and Parts • T-Series 



022104-000-30 Short Slide Catch $ 0.74 

022105-000-30 Slide Catch 2.00 

022106-002-55 Retractor 2.60 

022108-000-60 Retractor Spring 4.90 

022112-000-30 Retainer, Retractor Spring 1.40 

022986-001-50 Retractor Insert 0.52 

030703-000-30 Inner Spindle, Passage and Button Functions 21.50 

030704-002-30 Lever Stop Plate 3.10 

030709-000-60 Clutch Spring 0.32 

030712-000-30 Mounting Plate, Inner 3.00 

030712-001-30 Mounting Plate, Outer 2.80 

030718-000-30 Key Spindle, std 3.90 

030718-001-30 Key Spindle, IC 3.90 

030722-000-30 Dogging Bar 2.50 

030724-000-30 Lever Retaining Ring 0.52 

030726-000-30 Flanged Nut 6.00 

030726-007-30 Flanged Nut, Inner Electrified 9.20 

030728-000 Push Button Cap 2.80 

030733-000-55 Spindle Inner 2.80 

M204-198 Drill guide for locating 5/16" thru-bolt holes 8.60 

031416-000-70 Solenoid, Fail Safe T851 312.00 

031516-000-70 Solenoid, Fail secure T881 312.00 

031511-000-30 Hex Nut, 1/-28 Special 6.60 

031514-000-30 Solenoid Mount 8.50 

031519-000-30 Inner Spindle, T851/881 33.80 

1387 Hex Key – 1/8" with Looped Handle 12.70 

1388 Hex Wrench 29.40 

A30746-000-00 Hub & Housing Assembly 12.50 

A30747-000-00 Hub & Plate Assembly 11.50 



A30905-001-00 Spindle & Driver Assembly, IC 

A30905-060-00 Spindle & Driver Assembly, 6 Pin 46.00 

A30906-070-00 Spindle & Driver Assembly, 7 Pin 

A30913-000-00 Key Spindle Assembly, Inner Std. 

A30913-001-00 Key Spindle Assembly, Inner IC 

139.00 

Q330-270 T Lock Spring Cage Kit (Inside for T411 and outside for all functions except T101, T291, T411) 

Q330-271 T Lock Spring Cage Kit (Inside- all functions except T411 and outside for T101, T291, T301) 

26.20 



T-11

T-Series • Chassis and Parts 

Chassis Assemblies 

Part Number 

Conventional 

Cylinder 

IC Core Description List Price 

A30761-000-00 T101 Chassis $69.50 

A30765-000-00 

T301 Chassis, T291 Chassis 

A30758-000-00 A30758-001-00 T351/561 Chassis 

A30769-000-00 A30769-001-00 T411 Chassis 

A30773-000-00 A30773-001-00 T501 Chassis 121.00 

A30756-000-00 A30756-001-00 T511 Chassis 

A30748-000-00 A30748-001-00 T521 Chassis 

A30760-000-00 A30760-001-00 T581 Chassis 

A30767-000-00 A30767-001-00 T381 Chassis 

A30759-000-00 A30759-001-00 T571 Chassis 

A31517-000-00 A31517-001-00 T851 Chassis 

A31518-000-00 A31518-001-00 T881 Chassis 

227.00 

648.00 

Screws 


021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $ 0.42 

024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.22 

030755-005-30 Type D screw - 8-32 x 5/16" 0.32 

030831-004-30 Set screw for standard lever - 1/4 x 20 x 1/4" 0.46 

031515-004-30 Fillister Head Screw - 4-40 x 1/4" 1.70 

031531-006-30 Set Screw for electrified screw - 1/4-20 x 3/8" 0.40 

031533-006-30 Self Tap Screw - 8-32 x 3/8" 0.34 

002770-016-30 Mounting Screws - 10-32x1” 0.38 

T-12 



Introduction 


Function Charts W-2 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-2 

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-3 

Complete Lock Pricing W-4 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-4 

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-5 

Options W-6 

Conventional Cylinder Options . . . . . . . . . . .W-6 

Complete Conventional Cylinders . . . . . . . . .W-6 

Interchangeable Core & Const. Core . . . . . .W-6 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-7 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-7 

Locks Less Components . . . . . . . . . . . . . . . .W-8 

Tactile Warning Strip . . . . . . . . . . . . . . . . . .W-8 

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8 

Miscellaneous Parts . . . . . . . . . . . . . . . . . . .W-8 

How To Order 



W 501 P D 

Latch Suffix 

D = Deadlatch 



B = Less SFIC 





Core 



to 5 chambers 


to 6 chambers 


Schlage C 

Function 

See W-2 

Lock Series 

W-Series 



Code 

Description 












Keys 




W-1

W-Series • Lever Functions 



FALCON ANSI 

FUNCTION 

W101 F75 Passage Latchset 



FALCON ANSI & 

FUNCTION 

W561 F84 Classroom Lock 


Outside lever is locked by key in 

outside lever. Inside lever is 

always free. 

W161 

Communicating/Exit Latch 

Deadlocking latch bolt by inside lever. 

Non-removable blank plate outside. 


W581 F86 Storeroom Lock 

Deadlocking latch bolt by lever inside 

or key outside. Outside lever is always 

locked. Inside lever is always free. 

W201 F77 Patio Lock 


lever is locked by push button from 

inside. Rotating inside lever or closing 

door releases button and unlocks outside 

lever. 

W301 F76 Privacy Lock 

Latch bolt by levers. Outside lever is 


Rotating inside lever or closing door 

release push button and frees outside 

lever. Inside lever is always free. 

Emergency release in outside lever 

unlocks door. 

W711 

W12 

Apartment Entrance Lock 



turning button locks outside lever, 

requiring use of a key for unlocking the 

door until button is manually unlocked. 


unlocked by key, by rotating inside 

lever, or by closing door. 


Dummy Trim 

Single Trim-surface mounted rigid lever. 

W501 F90 Entry Lock 


locks outside lever until unlocked by 

key or by rotating inside lever. Closing 

door release push button and unlocks 

door. Inside lever always free. 

Deadlock latchbolt. 

W511 F109 Entry/Office Lock 


Turn/push button locking. Pushing 

and turning button locks outside lever, 





lever. Inside lever is always free. 

W-2 



Knob Functions • W-Series 


Key-In-Knob Locks 

FALCON ANSI 

FUNCTION 

W101 F75 Passage Latchset 

Latch bolt by knob at all times. 


FALCON ANSI & 

FUNCTION 

W561 F84 Classroom Lock 

Deadlocking latch bolt by knobs. 

Outside knob is locked by key in 

outside knob. Inside knob is 

always free. 

W301 F76 Privacy Lock 

Latch bolt by knobs. Outside knob is 


Rotating inside knob or closing door 

release push button and frees outside 

knob. Inside knob is always free. 

Emergency release in outside knob 

unlocks door. 

W501 F90 Entry Lock 


locks outside knob until unlocked by 

key or by rotating inside knob. Closing 

door release push button and unlocks 

door. Inside knob always free. 

Deadlocking latchbolt. 

W581 F86 Storeroom Lock 

Deadlocking latch bolt by knob inside 

or key outside. Outside knob is always 

locked. Inside knob is always free. 

W711 

Apartment Entrance Lock 



turning button locks outside knob, 



Pushing button locks outside knob until 

unlocked by key, by rotating inside 

knob, or by closing door. 

Inside knob is always free. 

W511 F109 Entry/Office Lock 


Turn/push button locking. Pushing 

and turning button locks outside knob, 





lever. Inside knob is always free. 

W12 

Dummy Trim 

Single Trim-surface mounted rigid knob. 



W-3

W-Series • Levers Complete Locks 

Grade 2 Medium Duty Cylindrical Locksets 

ANSI-A156.2, SERIES 4000, Grade 2 

D (Dane) 

Q (Quantum) 

Key-In-Lever 


D Q D Q 

605 



W501PD Entry 

W511PD Entry/Office 

W561PD Classroom $108.00 $120.00 $138.00 

W581PD Storeroom 

W711PD Apartment Entry 


W101S Passage $98.00 $110.00 $128.00 

W161D Communicating/Exit 

W201D Patio 100.00 112.00 130.00 

W301S Privacy 

Dummy Trim 

W12 Half Dummy $58.00 $64.00 $74.00 

W-4 



Knobs Complete Locks • W-Series 

ELI (Elite) 

HAN (Hana) 

Key-In-Knob 


E H 



W511PD Entry/Office 

W561PD Classroom 

W581PD Storeroom $63.00 $75.00 $93.00 

W711PD Apartment Entry 


W101S Passage $51.00 $63.00 $81.00 

W301S Privacy 53.00 65.00 83.00 

Dummy Trim 

W12 Half Dummy $39.00 $51.00 $69.00 



W-5

W-Series Levers • Cylinder Options 


Description 

Specify 


Example: W581P 


Example: W581P6 


Example: W581P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

Example: W581CP6 (All other keying, not listed above) 


(per core) 

STD 

N/C 

$5.90 

N/C 

* Competitor keyways are furnished 0 bitted. 

Not available Master keyed, except Schlage C 






W-Series Complete Conventional Cylinders 

Cylinder Mechanism 

Part Number 

Price 

For All Other Functions For W561 Each 

6 Pin Falcon keyway cylinder Q330-154 Q330-155 

6 Pin Schlage C keyway cylinder Q330-152 Q330-153 

$38.00 

For other cylinders, see pages CYL-4 - CYL-6. — 

Notes: 

5) Finishes for Falcon keyway cylinders are 606 and 626 only. 

6) Falcon cylinders are furnished G keyway unless otherwise specified. 

7) Restricted sections see CYL-3. See Restricted Keyway Policy for standard keyway 

and policy on use of restricted keyway cylinders. Contact 877-671-7011 for availability. 



Description 







Specify 


(per core) 

G Suffix 

Example: W581GD6 $39.00 

BB Suffix 

Example: W581BB6 

H Suffix 

Example: W581HD6 

28.40 

B Suffix 

Example: W581BD 

N/C 

BDC Suffix 

Example: W581BDC 

3.50 


W-6 




Latch & Strike Options • W-Series 

Specify 

Deadlatch Restoring 

Springlatch 161, 501, 511, Deadlatch 

Backset Description 101, 301 561, 581 201, 501, 511, 711 Add to Lock Price 

Square corner, 1-1/8" x 2-1/4" 30-209 30-203 30-200 

2-3/8"* Square corner, 1" x 2-1/4" 30-207 30-201 30-198 

Radius corner, 1" x 2-1/4" 30-208 30-202 30-199 N/C 

Square corner, 1-1/8" x 2-1/4" 30-206 30-197 30-194 

2-3/4" Square corner, 1" x 2-1/4" 30-204 30-195 30-192 

Radius corner, 1" x 2-1/4" 30-205 30-196 30-193 




ANSI, 1-1/4" x 4-7/8" standard 1-3/8" 30-148 

Square Corner, T-Strike 1-1/8" x 2-3/4" 1-3/8" 30-149 

Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-150 

N/C 

Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-151 

Latches as Parts Finishes: 605, 606, 613, 630 

Specify 

Deadlatch Restoring 

Springlatch 161, 511, Deadlatch 

Backset Description 101, 103 561, 581 201, 501, 711 Add to Lock Price 

Square corner, 1-1/8" x 2-1/4" Q330-209 Q330-203 Q330-200 

2-3/8" Square corner, 1" x 2-1/4" Q330-207 Q330-201 Q330-198 

Radius corner, 1" x 2-1/4" Q330-208 Q330-202 Q330-199 $8.80 

Square corner, 1-1/8" x 2-1/4" Q330-206 Q330-197 Q330-194 

2-3/4" Square corner, 1" x 2-1/4" Q330-204 Q330-195 Q330-192 

Radius corner, 1" x 2-1/4" Q330-205 Q330-196 Q330-193 

Strikes as Parts Finishes: 605, 606, 613, 630 


ANSI, 1-1/4" x 4-7/8" standard 1-3/8" Q330-148 

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-3/8" Q330-149 

Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-150 

Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-151 

Note: 1) Specify finished when ordering. 

$8.80 




W-7

W-Series • Misc. Parts & Options 


Description 

Less standard (conventional) cylinder 

Less latch 

Less strike 

Specify 

L Suffix 

Example: W581LD DAN 

LLL Suffix 

Example: W581PD6 DAN 626 LLL 30-148 

LLL Suffix 

Example: W581GD7 DAN 626 30-206 LLL 

Deduct from 

Lock Price 

$5.90 

5.90 

5.90 


Description Specify List Price 



$49.40 

Example: W581PD6 6DA (for Dane) 

Notes: 1) Outside lever only has abrasive strip application, unless otherwise specified. 

2) Abrasive strip not available in 613 finish. 

Screws 

Part Number Description Finishes List Price 

Q330-170 Screw Pack 605, 606, 613, 630 $4.80 

Q330-182 Screw Pack — Dummy Trim – 3.50 



Q330-168 SFIC Tailpiece (throw member for levers) 

Q330-164 Conventional Cylinder tailpiece for entrance and storeroom functions $5.90 

Q330-165 Conventional Cylinder tailpiece for classroom functions 

Q330-169 SFIC Tailpiece (throw member for knobs) 

Q330-282 Inside Spring Cage Kit 

W-8 



Introduction 


Function Chart X-2 

Complete Lock Pricing X-3 

Options & Parts X-4 

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6 

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6 

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6 

Locks Less Components . . . . . . . . . . . . . . . .X-7 

Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . .X-7 

Stainless Steel/Corros. Resist. Chassis . . . . .X-7 

Non-Standard Door Thickness . . . . . . . . . . . .X-7 


X 501 P D 

Latch Suffix 

D = Deadlatch 


X-Series 


B = Less SFIC 





Core 



to 5 chambers 


to 6 chambers 


to 7 chambers 


Schlage C 

Function 

See X-2 

Lock Series 



Code 

Description 













Keys 





X-1

X-Series • Functions 



FALCON ANSI 

X101 F75 Passage/Closet Latchset 

Latch bolt by knobs at all times. 


FALCON ANSI 

X521 F81 Office Lock 


locks outside knob requiring use of key 


knob always free. 

X301 F76 Privacy Lock 

Latch bolt by knobs. Outside locked by 

push button in inside knob. Rotating 

inside knob or closing door releases push 


knob. Emergency Release Tool M504- 

271. 

X411 F87 Asylum Lock* 

Deadlocking latch bolt by key from 

either side. Both knobs rigid. 

X561 F84 Classroom Lock 

Deadlocking latch bolt by knobs. Outside 

knob is locked by key in outside knob. 

Inside knob is always free. 

X571 F90 Dormitory Lock 

Deadlocking latch bolt by knobs except 


knob. Key in outside knob locks or 

unlocks outside knob and releases button. 


knob always free. 

X501 F82 Entry Lock 


locks outside knob until unlocked by key 

or by rotating inside knob. 

X581 F86 Storeroom Lock 

Deadlocking latch bolt by inside knob or 

key outside. Outside knob rigid. 

X511 F109 Entry/Office Lock 


turning button locks outside knob 




unlocked by key or by turning inside 

knob. 

X12 

Single Dummy Trim 

Single Trim–Surface mounted. 




X-2 



Grade 1 Heavy Duty Cylindrical Locksets 


Key-In-Knob • X -Series 

EG (Elite-Gala) HG (Hana-Gala)** TG (Troy-Gala) 

EY (Elite-York) HY (Hana-York)** TY (Troy-York) 

Key-In-Knob 


EG EY HG HY TG TY 

TG TY 

Function Description 626 605 606 625 613 630 


X501PD Entry 

X511PD Entry/Office 

X521PD Entry/Office $371.00 $383.00 $401.00 $401.00 

X561PD Classroom 

X571PD Dormitory 

X581PD Storeroom 


X411PD * Asylum $432.00 $444.00 $462.00 $462.00 

*CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in 



X101S Passage $265.00 $277.00 $295.00 $295.00 

X301S Privacy 330.00 342.00 360.00 360.00 

X12 Single Dummy trim 118.00 124.00 134.00 134.00 

** Hana Knob not available in IC 



X-3

X-Series • Latches and Strikes 


Finishes: 606, 613, 630 


Square corner, 1 1/8" x 2-1/4", std. 98535 

9/16" radius corner, 1-1/8" x 2-1/4" 98538 

N/C 

2-3/4" 

3/4" proj. square corner, 1-1/8" x 2-1/4" 98835S** 

9/16" radius x 3/4" proj., 1-1/8" x 2-1/4" 98838S** 

$118.00 

Square corner, 1" x 2 1/4" 92330 


11.00 

2-3/8"* 



11.00 

5" Backset Link for 2-3/4" Backset Latch A22161-005-00 * 34.60 


** Only available as a deadlatch. 

Note 1): Stainless steel applications can be substituted for the 2-3/4" backsets. Specify as "S" after part number (ex: 98535S) 



ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 5164 

Square corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 

Square Corner, T-strike, 1-1/8" x 2-3/4" 

5185 

1-5/16" 

Vermin proof strike for ships, 9/16" radius 5133-4 $65.70 

2 3/4" high T strike, ANSI A115.3 1 5183 

2 3/4" high T strike, ANSI A115.3 9/16 5185-4 

2 3/4" high T strike, ANSI A115.3 1-9/16 5186 N/C 

2 3/4" high T strike, ANSI A115.3 1-13/16 5187 



ANSI dust box 1" deep, steel - 005099-000-30 

Dust box, 1/2" deep, use with 2-3/4" strike - 012191-003-70 

Dust box, 1/2” deep, stainless steel - 012191-000-60 N/C 

ANSI, 1-1/4" x 4 - 7/8" 7/8" 5161 N/C 


Finishes: 606, 613, 630 

Latch Face 

Backset 

2-3/8" 2-3/4" 

List Price 



1" Spring Latch – 1/4" Radius A92321-000 A92331-000 

1" Deadlatch – 1/4" Radius A92321-00D A92331-00D 

1-1/8" Spring Latch * A98535-000 

$48.80 

1-1/8" Deadlatch * A98535-00D 

1-1/8" Spring Latch – 9/16" Radius * - A98538-000 

1-1/8" Deadlatch – 9/16" Radius * A98538-00D 

1-1/8" Deadlatch – 3/4" Projection * A98835-0SD 

1-1/8" Deadlatch – 9/16" Rad. X 3/4" Proj. * A98838-0SD 

189.00 


*Marine. For non-ferrous mechanism latches, add "0SD" for deadlatch or "00S" for spring latch to latch number. These latches 

conform to the standards set forth within ANSI/BHMA 156.2, 156.5 and 156.15 and are suitable for marine applications. 

Note 2): Marine Latches $17.10 Add for non-ferrous mechanism latches Add “OSD”, for deadlatch. 


X-4 



Latches and Strikes • X-Series 

Strikes sold separate Finishes: 605, 606, 613, 625, 626, 629, 630 


ANSI, 1-1/4" x 4-7/8" 1-5/16" 005164-000 $11.40 


Q001-048 

1" 


3.50 

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 

2 3/4" high T strike, ANSI A115.3 9/16 A05185-004 

24.00 

2 3/4" high T strike, ANSI A115.3 1 A05183-000 

2 3/4" high T strike, ANSI A115.3 1-9/16 

A05183-004 40.00 

A05186-000 

2 3/4" high T strike, ANSI A115.3 1-13/16 A05187-000 

2 3/4" high T strike, ANSI A115.3 2-1/16 A05188-000 44.80 

2 3/4" high T strike, ANSI A115.3 

A05189-000 

2-5/16 

Vermin proof strike for ships, 9/16" radius A05133-004-630 65.70 


ANSI dust box 1" deep, Stainless steel - 005099-000-60 8.30 

Dust box, 1/2” deep, stainless steel 012191-000-60 4.90 

Dust box, 1/2" deep, use with 2-3/4" strike 012191-003-70 1.80 

ANS, 1-1/4" x 4-7/8" 7/8" 005161-000 11.40 



X-5

X-Series • Cylinder Options 

X-Series Complete Cylinders 


5 pin cylinder X411, 501, 511, 521, 581 E & T A23152 

5 pin cylinder X411, 501, 511, 521, 581 H A23152-02 

5 pin cylinder X561 – E and T designs A23151 

5 pin cylinder X561 – H designs, 571 – E & T A23151-02 

5 pin cylinder X571 – H designs A23151-03 

6 pin cylinder X411, 501, 511, 521, 581 E & T A23162 

$38.00 


6 pin cylinder X561 – E and T designs A23161 

6 pin cylinder X561 – H designs, 571 – E & T A23161-02 



7 pin cylinder X561 – H designs A23171-01 51.00 


* Cylinders are furnished G keyway, keyed differently unless otherwise specified. 








(per core) 


Example: X581P 

STD 


Example: X581P6 

N/C 

7 pinned cylinder (Hana only) P7 Suffix 

Example: X581P7 

$11.00 


Example: X581P6 (0 Bitted, KD, KA4 only) 

Schlage C (6 pin only) CP6 Suffix N/C 

Example: X581CP6 (All other keying, not listed above) 


Small Format Interchangeable Core 

Small Format Construction Core 


(per core) 


G Suffix 

Example: X581GD6 

$39.00 


BB Suffix 

Example: X581BB6 


H Suffix 

39.00 

Example: X581HD6 


B Suffix 

N/C 

Example: X581BD 


BDC Suffix 

3.50 

Example: X581BDC 



Notes: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details 

X-6 



Knobs 

Parts • X-Series 

List price 

Part Number 

Description 

605 606 613 

626 625 630 

022258-007 Knob, Troy – Closed 

022258-008 Knob, Troy – Emergency 

022258-009 Knob, Troy – SFIC 

$66.60 $69.60 $74.60 

022290-007 Knob, Troy – Button/Cylinder 

022950-007 Knob, Hana – Closed 

022950-008 Knob, Hana – Emergency 63.40 66.40 71.40 

022953-007 Knob, Hana – Button/Cylinder 

022980-007 Knob, Elite – Closed 

022980-008 Knob, Elite – Emergency 

022980-009 Knob, Elite – SFIC 

57.40 60.40 65.40 

022981-007 Knob, Elite – Button/Cylinder 

Note: 1) Hana and Elite not available in 630 

Roses 

Part Number 

022920-000 Rose, Gala 

024030-000 Rose, York 

Description 

List price 

605 606 613 

626 625 630 

$23.40 $26.40 $31.40 



031718-000 Push button cap 

031719-000 Turn button cap 

$2.10 

031748-000-70 Push button mount 6.00 

031749-000-70 Turn button mount 11.80 

Screws 


024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo $ .22 

021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo .42 

Screw packs 

Part Number Description Specify Finish Contents List price 

A03519-000 Screw pack 605, 613, 626 024416-012 (2 ea) $2.90 



X-7

X-Series • Options 


Description 

Less each knob 


Less latch 

Less strike 

Specify 

LLL for knob design 

Example: X581PD LLL/EG 

L suffix 

Example: X581LD EG 

LLL for latch 

Example: X581PD EG 626 LLL/5164 


Example: X581PD EG 626 98535 LLL 

Deduct from 

Lock Price 

$8.70 

38.00 

31.90 

7.60 

Tactile Warning 


Abrasive - 6 Prefix (not available in 613) 


Example: 6EG for ELITE GALA 

$45.50 

Knurled - 8 Prefix (not available in 630) Preface the design code with 8 

Example: 8EG for ELITE GALA 

$82.80 

Notes: 1) Outside lever only is coated unless otherwise specified 

Stainless Steel / Corrosion Resistant Chassis 


XC – Stainless steel/non-ferrous mechanism 

Preface the function code with C 

Example: XC581 PD TG 630 

$125.00 



Door thickness over 2-1/8" - 2-1/4" 

Door thickness and how door is extended 

$9.30 

Example: 2-1/4", EE 

X-8 



Introduction 


Function Chart Y-2 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-2 

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-2 

Complete Lock Pricing Y-3 

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-3 

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-4 

Options Y-5 

Complete Conventional Cylinders . . . . . . . . .Y-5 

Interchangeable Core & Const. Core . . . . . . .Y-5 

Conventional Cylinder Options . . . . . . . . . . . .Y-5 

Locks Less Components . . . . . . . . . . . . . . . .Y-5 

Non-Standard Finishes . . . . . . . . . . . . . . . . . .Y-5 

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6 

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6 

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .Y-6 

Tactile Warning Strip . . . . . . . . . . . . . . . . . . .Y-6 

How To Order 



Y 521 P D 

Latch Suffix 

D = Deadlatch 


B = Less SFIC 





Core 



to 5 chambers 


to 6 chambers 


Schlage C 

Function 

See Y-2 

Lock Series 

Y-Series 



Code 

Description 







Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 1-1/2-Hour fire door 

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw 

Strike 1-1/8" x 2-3/4", T-Strike, Square corner, no box 



Keys 


Backset 2-3/8" - 2-3/4" universal backset 



Y-1

Y-Series • Functions 

Lock Features and Specifications 



FALCON ANSI 

Y101 F75 Passage/Closet Latchset 



FALCON ANSI 

Y101 F75 Passage/Closet Latchset 

Latch bolt by knobs at all times. 

Y161 



lever. Non-removable blank plate 

outside. 

Y161 



knob. Non-removable blank plate outside. 

Y301 F76 Privacy Lock 

Latch bolt by lever from either side 

except when locked by push button 

inside. Emergency release in outside 

lever. Manually returning the push 

button to the unlocked position 

releases inside and outside. 

Y301 F76 Privacy Lock 

Latch bolt by knob from either side 

except when locked by push button 

inside. Emergency release in outside 

knob. Manually returning the push button 

to the unlocked position releases inside 

and outside. 

Y521 F81 Entry/Office Lock 


except when outside lever is locked by 

turn button inside. Inside lever always 

free. When outside lever is locked, latch 

bolt is operated by key in outside lever or 

by rotating inside lever. Turn button must 

be manually returned to the unlocked 

position to release outside lever. Lock 

may be locked or unlocked by key in 

cylinder outside. 

Y521 F81 Entry/Office Lock 

Deadlocking latch bolt operated by knob 

except when outside knob is locked by 

turn button inside. Inside knob always 

free. When outside knob is locked, latch 

bolt is operated by key in outside knob or 

by rotating inside knob. Turn button must 

be manually returned to the unlocked 

position to release outside knob. Lock 

may be locked or unlocked by key in 

cylinder outside. 

Y561 F84 Classroom Lock 

Deadlocking latch bolt operated by 

lever. Outside lever is locked by key in 

outside lever. Inside lever is always free. 

Y561 F84 Classroom Lock 

Deadlocking latch bolt operated by knob. 

Outside knob is locked by key in outside 

knob. Inside knob is always free. 

Y581 F86 Storeroom Lock 

Deadlocking latch bolt operated 

by inside lever or key outside. Rotating 

key in outside lever unlocks mechanism 

allowing lever to retract latch bolt. 

When key is removed, outer lever 

becomes rigid. 

Y581 F86 Storeroom Lock 

Deadlocking latch bolt operated by inside 

knob or key outside. Rotating key in 

outside knob unlocks mechanism 

allowing knob to retract latch bolt. When 

key is removed, outer knob becomes 

rigid. 

Y12 


Single Trim-Through bolted from inside. 

For double trim order two singles and 

drill out threads from mounting stud. 

Y12 


Single Trim-Through bolted from 

inside. For double trim order two 

singles and drill out threads from 

mounting stud. 

Y-2 



Grade 2 Standard Duty Tubular Locksets 


Key-In-Lever • Y-Series 

D (Dane) 

Q (Quantum) 

Key-In-Lever 


D Q 

605 606 

Function Description 626 625 613 


Y521PD Entry/Office 

Y561PD Classroom $162.00 $174.00 $192.00 

Y581PD Storeroom 


Y101S Passage $103.00 $115.00 $133.00 

Y161D Communicating/Exit 

Y301S Privacy 

116.00 128.00 146.00 

Dummy Trim 

Y12 Half Dummy $50.00 $56.00 $66.00 

Notes: 

1) Quantum is not available as interchangeable core. 

2) Split designs and/or finishes are priced at the highest design and/or finish price. 



Y-3

Y-Series • Key-In-Lever 

Grade 2 Standard Duty Tubular Locksets 


E (Elite) 

H (Hana) 

Y-Series Key-In-Knob 

Design and Finishes 

E H 



Y521PD Entry/Office 

Y561PD Classroom $84.00 $96.00 $114.00 

Y581PD Storeroom 


Y101D Passage $54.00 $66.00 $84.00 

Y161D Exit 69.00 81.00 99.00 

Y301D Privacy 62.00 74.00 92.00 

Dummy Trim 

Y12 Half Dummy $24.00 $30.00 $40.00 

* Expediting and order cancellation are not allowed after order is placed. 

Notes: 

1) Replacement parts, other than latches, cylinders and strikes, not available. 

2) Split designs and/or finishes are priced at the highest design and/or finish price. 

Y-4 



Latches and Strikes • Y-Series 

Square Corner 

1/4" Radius 




2-3/4" - 2-3/8" Square corner, 1" x 2-1/4" 01-043 N/C 

1/4" Radius round corner, 1" x 2-1/4" 01-044 



Square Corner, T-strike, 1-1/8" x 2-3/4", standard 1-5/16" 01-046 

Square corner, full lip 1-5/8" x 2-1/4" 

01-049 N/C 

1" 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 01-048 

ANSI, 1-1/4" x 4-7/8" 1-5/16" 01-047 $6.80 

ANSI dust box 1" deep, steel - 005099-000-30 $2.60 


Finishes: 605, 613, 626 

Part Number Description Backset List Price 

Q001-043 Square corner, 1" x 2-1/4" 

Q001-044 1/4" Radius round corner, 1" x 2-1/4" 2-3/8 - 2-3/4” $24.40 

Q001-045 Square corner, 1-1/8" x 2-1/4" 


Finishes: 605, 613, 626 


Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" Q001-046 $3.50 

ANSI, 1-1/4" x 4-7/8" 1-5/16" Q001-047 11.40 

1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048 3.50 

Square corner, full lip 1-5/8" x 2-1/4" 1" Q001-049 3.50 


Screws 


024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo $ 0.22 

021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.42 



Q001-055 IC Tailpiece $2.30 




Y-5

Y-Series • Options & Cylinders 

Y Series • Complete Cylinders 


5 pin cylinder Y series A23155 

6 pin cylinder Y series A23165 




4) Restricted sections See CYL-3. See Restricted Keyway Policy (p. 8) for standard keyways and policy on use of 

restricted keyway cylinders. Contact Customer Service for availability. 

$38.00 










Note: 


G Suffix 

Example: Y581GD6 $39.00 

BB Suffix 

Example: Y581BB6 

H Suffix 

28.40 

Example: Y581HD6 

B Suffix 

N/C 

Example: Y581BD 

BDC Suffix 

3.50 

Example: Y581BDC 






Example: Y581P 


Example: Y581P6 


Example: Y581P6 (0 Bitted, KD, KA4 only) 


CP6 Suffix 

Example: Y581CP6 (All other keying, not listed above) 


STD 

N/C 




Less latch 

Less strike 

L suffix 

Example: Y581LD DAN 

LLL for latchbolt 

Example: Y581PD 626 LLL 01-046 


Example: Y581PD 626 01-045 LLL 

Lock Price 

$15.30 

15.10 

2.30 

Y-6 



Non-Standard Finishes 


Any split finish option 

Finish specified O/S x I/S 

Example: 605 x 626 

Note: 7) 625 and or any split finish is available on a special order basis with extended lead times. 

Orders cannot be cancelled and product cannot be returned. 


Lock Price 

See Page Y-3, Y-4 

Description Specify List Price 



$46.20 

Example: W581PD6 6EL (for ELITE) 

Notes: 1) Outside lever only has abrasive strip application, unless otherwise specified. 

2) Not available in 613 finish. 



Y-7

Y-Series 

Notes 

Y-8 



Introduction 


Conventional Cylinders . . . . . . . . . . . CYL-2 

Interchangeable Cores . . . . . . . . . . . . CYL-7 

IC Cylinders and Cabinet Locks . . . . CYL-8 

Conventional Keys and Blanks . . . . . CYL-9 

IC Keys and Key Blanks, 

Disposable Construction Core . . . . . CYL-10 

Keys & Keying Construction 

Core Program . . . . . . . . . . . . . . . . . . . CYL-11 

Cams, Tailpieces, Throw Members. . CYL-12 

Cylinder Parts and 

Service Equipment . . . . . . . . . . . . . . . CYL-13 

IC Cams, Throw Members, etc.. . . . . CYL-14 

IC Service Equipment & Supplies. . . CYL-15 

Keying and Stamping Charges . . . . . CYL-16 

Cylinders, Keys and Keying 

Finish Codes and Descriptions* 

Code 

Description 

605 (US 3) Bright Brass-Clear Coated 

606 (US 4) Satin Brass-Clear Coated 

613 (US 10B) Satin Bronze-Dark Oxidized and Oil Rubbed 

626 (US 26D) Satin Chromium 

629 (US32) Bright Stainless Steel 

630 (US 32D) Satin Stainless Steel 

* See individual products for finish availability. 


Standard Cylinder 

SFIC 

Restricted Keyways 

Solid Brass housings and plugs. Standard Keyway is Falcon G keyway. 

Keyed different furnished unless otherwise specified (additional charges may apply, 

see CYL-17 for keying charges) with 2 nickel silver keys. Mortise cylinder standard lengths 

are 1 1/8” for conventional cylinders and 1 3/8” for small format interchangeable core housings. 

Furnished in A keyway unless otherwise specified. Combinated cores are provided with 2 keys. 

Falcon has a varied selection of restricted keyways for conventional and SFIC cylinders based 

on geographic restrictions for usage. Minimum cylinder purchase required. See your Security and 

Safety Consultant for more information or availability. 



CYL-1

Conventional Cylinders 

951 Available in: 

605 606 

613 626 

629 630 


605 606 

613 626 

629 630 

986T 

Available in: 

605 606 

613 626 

629 630 

985D 

Available in: 

605 606 

613 626 

625 

Non-IC Products 

MA and M Series Conventional Rim and Mortise Cylinders 

Pins Length Description Number 626 605 606 613 629 630 

5 or 6 

1-1/8 985 

Mortise 

1-1/4 

986 

$53.00 $55.00 

1-3/8 987 53.00 55.00 

5, 6, or 7 

1-1/2 

988 63.00 65.00 

Mortise 

1-3/4 990 78.00 80.00 

2 992 81.00 83.00 

6 

1-1/8 250 

1-1/4 251 

6 1-3/8 Mortise, hotel function* 252 69.00 71.00 

7 1-3/8 253 

5, 6, or 7 – Rim 951 53.00 55.00 

- 1-1/8 985T 

Mortise, thumbturn 

- 1-1/4 

986T 

83.00 85.00 

- 1 984D 

Dummy 

- 1-1/8 

985D 

32.00 34.00 

*Hotel mortise cylinders are offered as masterkeyed or “O” bitted only and must be specified. 

Notes: 1) MA cam provided unless otherwise specified. 

2) For 7-pin conventional add $11.00 

3) All mortise cylinders will be furnished with cam 5622-STO, except for MA381 function which will be supplied 


4) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C. 

5) 984D, 985D not available in 629 and 630. 

6) Conventional mortise cylinder with Schlage C keyway are available with 985, 986 and 951. 

7) Add $9.00 (list) for Falcon restricted keyways. See page iv for standard keyways. All others are restricted. Falcon 



605 606 

613 626 

629 630 


606 626 


606 626 

Miscellaneous Cylinders 

Finishes 

605 

Part Number Description 606, 626 613 629, 630 

945 Cam lock $91.90 $93.60 $96.40 

950* Sliding door cylinder 35.40 - - 

954* Mail box cylinder 51.20 - - 

*For 7-pin cylinder add $11.00 

Note: 8) Postal regulations prohibit master keying of mail box cylinders. 

CYL-2 



Key-in-Knob / Lever Type Cylinders 

Including Padlock and Deadlock Insert Cylinders 



Falcon Conventional Cylinders, 5 and 6 Pin 

Cylinder Mechanism Part Number List Price 

5 Pin Cylinder 955 A23151-01 

5 Pin Cylinder B series except 611 function A23155-02 

5 Pin Cylinder B series 611 function A23151-06 







5 Pin Cylinder H all other functions & designs A30028 

5 Pin cylinder H511 knobs A30040 

5 Pin Cylinder RU/T series (except 381 IS, 571) A23151-06 

5 Pin Cylinder RU/T series 381 IS A23151-05 

5 Pin Cylinder RU/T series 571 A23151-07 

5 Pin Cylinder X411, 501, 511, 521, 581 E & T A23152 

5 Pin Cylinder X411, 501, 511, 521, 581 H A23152-02 

5 Pin Cylinder X561 – E and T designs A23151 

5 Pin Cylinder X561 – H designs, 571 – E & T A23151-02 

5 Pin Cylinder X571 – H designs A23151-03 

5 Pin Cylinder Y series A23155 

6 Pin Cylinder 955 A23161-01 $38.00 

6 Pin Cylinder B series except 611 function A23165-02 

6 Pin Cylinder B series 611 function A23161-06 







6 Pin Cylinder H101 A30028-01 

6 Pin Cylinder H511 knobs A30040-01 

6 Pin Cylinder RU /T series 381 IS A23161-06 

6 Pin Cylinder RU/T series (except 381 IS, 571) A23161-05 

6 Pin Cylinder RU/T series 571 A23161-07 

6 Pin Cylinder X411, 501, 511, 521, 581 E & T A23162 

6 Pin Cylinder X411, 501, 511, 521, 581 H A23162-02 

6 Pin Cylinder X561 – E and T designs A23161 

6 Pin Cylinder X561 – H designs, 571 – E & T A23161-02 

6 Pin Cylinder X571 – H designs A23161-03 

6 Pin Cylinder Y series A23165 

6 Pin Cylinder H451, 461 hotel/motel A30036-01 51.00 

6 Pin Cylinder W lock - except W561 (lever) Q330-154 

6 Pin Cylinder W561 (lever) Q330-155 38.00 

6 Pin Cylinder W lock - except W561 (knob) Q330-238 

6 Pin Cylinder W561 (knob) Q330-246 

Falcon Conventional Cylinders, 7 Pin 

Cylinder Mechanism Part Number List Price 





7 pin cylinder RU/T series (except 381 IS, 571) A23171-05 $51.00 

7 pin cylinder RU/T series 381 IS A23171-06 

7 pin cylinder RU/T series 571 A23171-07 




Note: 1) Finishes: 606 and 626 only 



4) Add $9.00 (list) for Falcon restricted keyways. See page iv for standard keyways. All others are restricted. Falcon 




CYL-3




Schlage Conventional Cylinders, 6 Pin 

Cylinder 

Function Keying Offered Part Number List Price 

Mechanism 

Schlage C kwy KA4, KD, 0-bit A23160-2 

Schlage E kwy 

955 

0-bit A23159-2 

Schlage C kwy KD, 0-bit A23160-13 

Schlage E kwy 

B except 611 

0-bit A23159-13 


Schlage E kwy 

B611, T381 IS 

0-bit A23159-11 


Schlage E kwy 

D121, 221 

0-bit Q033-068 

Schlage C kwy KD, 0-bit, KA4 Q033-071 

Schlage E kwy 

D131, 231 

0-bit Q033-067 

Schlage C kwy KD, 0-bit, KA4 Q033-070 

Schlage C kwy 

D141, D241 

KA4, KD, 0-bit Q033-069 

Schlage E kwy 0-bit Q033-066 

Schlage E kwy 

H deadbolt 

0-bit A23159-10 


Schlage E kwy 

H511 knobs 

0-bit A23159-7 


Schlage E kwy 

T571 

0-bit A23159-12 

Schlage C kwy KA4, KD, 0-bit A23160 $40.00 

Schlage E kwy 

T Except 571 & 381 IS 

0-bit 

A23159 


Schlage E kwy 

X411, 501, 511, 521, 581 E & T 

0-bit A23159-5 


Schlage E kwy 

X411, 501, 511, 521, 581 H 

0-bit A23159-6 


X561 E & T 

Schlage E kwy 

0-bit A23159-1 


X571 E & T, X561 H 

Schlage E kwy 

0-bit A23159-3 


Schlage E kwy 

X571 H 

0-bit A23159-4 


Schlage E kwy 

Y series 

0-bit A23159-8 

W Series, except W561 (Levers) MK, KA4, KD, 0-bit Q330-152 

Schlage C kwy W561 (Levers) MK, KA4, KD, 0-bit Q330-153 

W Series, except W561 (Knobs) MK, KA4, KD, 0-bit Q330-237 

W561 (Knobs) MK, KA4, KD, 0-bit Q330-245 


2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified. 

Master keying is available on Schlage C Keyway only. 

CYL-4 






Corbin Russwin Conventional Cylinders, 6 Pin 

Cylinder 

Mechanism 


Corbin 60 kwy KD, 0-bit A23167-2 

Corbin/Russ L4 kwy 955 0-bit A23174-2 

Russwin D1 kwy KD, 0-bit A23168-2 


Corbin/Russ L4 kwy B Series KA4, 0-bit, KD A23174-13 



Corbin/Russ L4 kwy B611, T381 IS series KA4, 0-bit, KD A23174-11 


Russwin D1 kwy D121, 221 KD, 0-bit Q033-074 

Corbin/Russ L4 kwy 0-bit Q033-079 

Russwin D1 kwy D131, 231 KD, 0-bit Q033-073 

Corbin/Russ L4 kwy 0-bit Q033-078 

Russwin D1 kwy D141, D241 KD, 0-bit Q033-072 

Corbin 60 kwy KD, 0-bit Q033-077 

Corbin/Russ L4 kwy 0-bit A23174-7 

Russwin D1 kwy H deadbolt KD, 0-bit A23167-7 

Corbin 60 kwy 0-bit A23168-7 

Corbin/Russ L4 kwy H511 knobs 0-bit A23167-10 


Corbin 60 kwy 0-bit A23167 

Corbin/Russ L4 kwy T Except 571 & 381 IS KA4, 0-bit A23174 

Russwin D1 kwy KD, 0-bit A23168 


Corbin/Russ L4 kwy T571 0-bit A23174-12 


Corbin 60 kwy 0-bit A23167-6 $40.00 

Corbin/Russ L4 kwy X 411, 501, 511, 521, 581 H 0-bit A23174-6 



Corbin/Russ L4 kwy X411, 501, 511, 521, 581 E & T 0-bit A23174-5 



Corbin/Russ L4 kwy X561 E & T 0-bit A23174-1 



Corbin/Russ L4 kwy X571 E & T, X561 H 0-bit A23174-3 



Corbin/Russ L4 kwy X571 H 0-bit A23174-4 



Corbin/Russ L4 kwy Y Series 0-bit A23174-8 


Corbin 60 kwy 0-bit Q330-166 

Corbin/Russ L4 kwy W Series, except W561 (Levers) 0-bit , KA4 Q330-158 

Russwin D1 kwy KD, 0-bit Q330-210 


Corbin/Russ L4 kwy W561 (Levers) 0-bit , KA4 Q330-159 



Corbin/Russ L4 kwy W Series, except W561 (Knobs) 0-bit , KA4 Q330-240 



Corbin/Russ L4 kwy W561 (Knobs) 0-bit , KA4 Q330-248 



2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified. Master keying is not available. 



CYL-5




Sargent Conventional Cylinders, 6 Pin 

Cylinder 

Mechanism 


955 A23166-2 

B Series A23166-13 

B611, T381 IS A23166-11 

H deadbolt A23166-7 

H511 Knobs A23166-10 


A23166 

Sargent LA Keyway T571 KD, 0 Bit A23166-12 $40.00 

X411, 501, 511, 521, 581 E & T A23166-5 

X411, 501, 511, 521, 581 H A23166-6 

X561 E & T A23166-1 

X571 E & T, X561 H A23166-3 

X571 H A23166-4 

Y Series A23166-8 

W Series, except W561 (Levers) Q330-160 

W561 (Levers) Q330-161 

W Series, except W561 (Knobs) Q330-243 

W561 (Knobs) Q330-251 

Yale Conventional Cylinders, 6 Pin 

Cylinder 

Mechanism 


955 A23169-2 

B except 611 KD, 0-bit A23169-13 

B611, T381 IS A23169-11 

D121, D221 

KD 

Q033-076 

D141, 241, 111, 211 Q033-075 

H deadbolt A23169-7 

H511 knobs A23169-10 


A23169 

Yale 8 (Para) Keyway T571 A23169-12 $40.00 

X411, 501, 511, 521, 581 E & T A23169-5 

X411, 501, 511, 521, 581 H A23169-6 

X561 E & T KD, 0-bit A23169-1 

X571 E & T, X561 H A23169-3 

X571 H A23169-4 

Y series A23169-8 

W Series, except W561 (Levers) Q330-156 

W561 (Levers) Q330-157 

W Series, except W561 (Knobs) Q330-239 

W561 (Knobs) Q330-247 


2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified. 

Master keying is not available. 

CYL-6 



Interchangeable Cores 

C607 

Available in: 

606 626 

IC Products 

Regular Core (suffix keyway to number) 

Uncombinated 

Combinated 

Description 6-Pin 7-Pin Price 6-Pin 7-Pin Price 

Standard C646 C647 

C606 C607 

$23.00 

Best style capping CB846 CB847 CB806 CB807 

No logo C648 C649 

C608 C609 

$23.00 

No logo, Best capping CB848 CB849 CB808 CB809 

$39.00 

Notes: 

1) For restricted keyways add $9.00 per core. See page iv for restricted keyway policies. 

For temporary construction cores and policy, see CYL-11. 

2) For 605, 613 and 625 add $2.50 per core. Minimum 250 pieces. 

3) Keying must be specified on combinated cores. 

Pricing: 

Finishes: 

Packaging: 

Keyways: 

Logo: 

Uncombinated cores have no pins, springs or keys. Combinated core prices include master keying. 

606 and 626 standard. 

Uncombinated cores are packed 20 per box. 

The “A” keyway is standard for IC products and will be supplied unless otherwise specified. 

A, B, C, D, DD, E, F, G, H, J, K, L, M, N, Q, R, TB and TD are equivalent to Best and Arrow IC keyways of the 

same letter designations. All other keyways are restricted. Add $9.00 list for all restricted keyways. 

When ordering locks or cores master keyed into existing Best, Arrow or other IC systems, a copy of the bitting list 

for the existing system is required with the order. Competitors’ bitting lists are safeguarded the same as Falcon 

bitting lists. See CYL-17. 

Cores and keys are supplied with the Falcon logo standard. 

Combinated cores supplied without logo are furnished with plain (non-embossed) keys. 



CYL-7

IC Cylinders & Cabinet Locks 

Rim Available in: 

605 606 

Tapered Head Available in: 

605 606 

Mortise 

613 626 

613 625 

629 630 

626 

Available in: 

605 606 

613 626 

629 630 

IC Products 

All prices are less core. Not available with C997. 

MA and M Series Small Format Interchangeable Rim and Mortise Core Housings 

Cat. Number Length Pins Description 626 605 606 613 629 630 

C987 1 3/8" 6 or 7 Mortise 

C988 1 1/2" 6 or 7 Mortise 

$33.00 $35.00 

C990 1 3/4" 6 or 7 Mortise 39.00 41.00 

C992 2" 6 or 7 Mortise 41.00 43.00 

C977 Fits Adams Rite 6 or 7 Mortise, tapered head 35.00 37.00 

C997 1 3/8" 6 or 7 Mortise, unassembled, less cam 26.00 28.00 

C262 1 5/8" 6 or 7 Mortise, hotel function RH 

C265 1 5/8" 6 or 7 Mortise, hotel function LH 

55.00 57.00 

C953 N/A 6 or 7 Rim 34.00 36.00 

Notes: 1) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied 


2) C977 is only furnished with 012667-001 Adams Rite Cam 

C943 C945 C959 C979 C982 

Cabinet Locks and Miscellaneous 

Finishes 

606, 605, 

Cat. No. Description 626 606, 626 605, 626 613 629, 630 

C942 Cabinet lock $71.00 - - $73.00 $75.00 

C943 Cam lock 100.00 - - 102.00 104.00 

C945 Cam lock - heavy cam 71.00 - - 73.00 75.00 

C959 Push lock for sliding doors - $98.00 - - - 

C979 Rim cabinet lock - - $60.00 - - 

C982 Mail box lock - 58.00 - 60.00 - 

Note: 

) U. S. postal regulations prohibit master keying of mail box locks. 

CYL-8 



Conventional Keys and Blanks 


Standard 

Plain 

(non-embossed) 

Large Bow 

Key Blanks 

(Specify keyway and order in multiples of 50 except where specified) 

Part Number Description Qty/Wt. Each 

KB573 

Standard 5-pin 

KB577 

Standard 6-pin 

50/1 $1.50 

KB581 Standard 7-pin 35/1 1.70 

KB751 

Plain 5-pin (non-embossed) 

KB761 


50/1 1.50 

KB771 Plain 7-pin (non-embossed) 35/1 1.70 

KB544 Large bow - 5-pin 25/1 3.60 

KB590 Large bow - 6-pin 25/1 4.20 

KB579 Emergency - 6-pin 50/1 6.00 

KB592 Emergency, large bow - 6-pin 25/1 7.00 

001911-001-70 Plastic handicap access bow only 1 4.70 

KB525 Block-O-Key construction key - 4-pin 1 3.30 

KB536 Block-O-Key removal tool 1 1.50 

Q330-215 6 Pin Schlage C Blank 1 2.10 

001911-001-70 Blue Plastic Bow 

(not shown full size) 

2” access bow meets Title 24 of 

The California Code for the Hand i capped. 

Cut Keys 

Part Number Description Each 

KB574 

Standard 5 Pin 

KB578 

Standard 6 Pin 

KB582 Standard 7 Pin $4.80 

KB794 


KB797 


KB799 


KB545 

Large bow - 5-pin (When furnished with lock - 2 keys) additional per lock 

KB545 

Large bow - 5-pin 

5.50 

KB591 

Large bow - 6-pin (When furnished with lock - 2 keys) additional per lock 

KB591 

Large bow - 6-pin 

6.50 

KB580 Emergency - 6-pin 8.30 

KB584 Emergency - 7-pin 9.10 

KB593 Emergency, large bow - 6-pin 8.60 

KB905 

With 2" handicap access bow, 5-pin 

KB906 

With 2" handicap access bow, 6-pin 

11.20 

KB907 With 2" handicap access bow, 7-pin 15.10 

KB531 Block-O-Key construction key - 4-pin 5.30 

KB565 

Construction key - 5-pin 

KB566 

Construction key - 6-pin 

5.10 

KB567 Construction key - 7-pin 5.70 

330055 Schlage C - 6 pin 4.80 

Q330-276 Schlage Split Key 6-pin 6.50 

*Specify key section to key (blank) numbers. 

Note: 1) Prices listed for key blanks and cut keys are for E, G and H sections only. For all other key sections 

add $0.80 list per key to prices shown. Letter of au tho ri za tion required for re strict ed sections; 

not available to stock; shipped directly to the end user. 



CYL-9

IC Keys and Key Blanks, Disposable Construction Core 

IC Products 

Standard 

Plain 

(non-embossed) 

Clipped 

for Handicap 

IC Core Key Blanks 

Standard Plain Both Sides Price 

Standard KB628 KB718 $1.70 

Stamped CONTROL KB608 KB744 3.50 

M Series EMERGENCY KB737 KB748 5.20 

Blade for 2" Access Bow KB633 - 5.00 

Plastic Access Bow 001911-001-70 - 4.70 

Standard 

Key Tip 

IC Core Cut Keys 

Standard 

Plain Both Sides 

6-Pin 7-Pin 6-Pin 7-pin Price 

Standard KB632-1 KB632-2 KB673-1 KB673-2 $5.20 

CONTROL KB609-1 KB609-2 KB778-1 KB778-2 6.60 

M Series EMERGENCY KB738-1 KB738-2 KB779-1 KB779-2 7.90 

2" Access Bow KB916 KB916-1 - - 12.00 

Note: 


2) Order standard blanks in multiples of 50. 

3) Prices for key blanks and/or cut keys are for single key sections only. 

Key blanks 50 min. Cut keys no minimum quantity 

4) For double milled key (e.g. DE, EF, FG) add $2.90 each to prices shown, 

minimum order quantity of 50 keys. 

5) Triple and quadruple milled keys add $3.30 each to price shown, 

minimum order quantity of 50 keys. 

6) For restricted sections add $0.80 per key Drop ship required. Not available for stock. 

Mortise EMK 

Tip 

Best® Style SFIC Core Key Blanks 


Standard KB800* KB801* $1.70 

* KB 800 & 801 are not available in multi milled keyways. 

Best® Style SFIC Core Cut Keys 


Standard 6-Pin KB807-1 KB809-1 $5.20 

Stamped Control 6-Pin KB811-1 KB813-1 6.60 

Standard 7-Pin KB807-2 KB809-2 7.90 

Standard Control 7-Pin KB811-2 KB813-2 12.00 

Best Key 

CYL-10 



Keys & Keying Construction Core Program 

Construction Core Program 

Keyed construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be ordered 

separately. All keyed construction cores are assessed a non-refundable handling charge (50-231). Standard payment terms apply. 

Please note that this list price is only subject to a 50% discount. No additional discounts may be applied to construction cores. 

Features: 

• 6-pin A keyway. 

• 7-pin A keyway. 

• Construction cores are a flat black finish on the face. Other colors may be provided. Contact Customer Service for available 

colors. 

• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately. 

• A control key is required to install and remove construction cores. Control keys must be ordered separately. 

• Construction cores may be returned for credit in working condition. Credit is issued upon receipt of cores at our factory. 

A Return Material Authorization (RMA) must be issued, in order for cores to be returned. 

Construction Core Program 

Part Number Description Specify Price 

C606CCA Construction core 6-pin Specify “H” suffix when ordering with locks, $28.40 

C607CCA Construction core 7-pin mortise cylinders and rim cylinders. 

KB632-1CCA Cut key for construction core 6-pin 

KB632-2CCA Cut key for construction core 7-pin 

5.20 

KB609-1CCA Cut control key 6-pin (order separately) 

KB609-2CCA Cut control key 7-pin (order separately) 

6.60 

1408 Disposable construction core Specify “BDC” suffix when ordering 3.50 

50-231F Non-refundable handling charge per core 5.00 

Notes: 

1) Keyed and temporary construction cores will be installed in locks and cylinders automatically unless otherwise 

specified on orders. 

2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. 

Different Falcon projects in the same area using the same or different contractors may use the same key. 

Where a higher degree of security is desired, order a set of cores in 606 or 626 finish keyed alike to a random 

combination. Specify “KS1.” Such cores are not returnable to Falcon but may be reused for other projects. 

3) Temporary construction cores are an inexpensive alternative to interior keyed construction cores. 

This temporary is intended for use on interior door applications or where security on-site is not a concern. 

Temporary Construction Core Program (Disposable) 

Temporary construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be ordered 

separately. Standard payment terms apply. Please note that this list price is only subject to a 50% discount. No additional 

discounts may be applied to disposable construction cores. 

Features: 

• Conveniently fits both 6 & 7-pin SFIC applications. 

• No keys need to be issued. 

• Disposable construction cores are not returnable. 

• The disposable core is inserted in the lever or knob and is operated by a thumbturn, which retracts the latch bolt. 

C607CCA 1408 



CYL-11

Cams, Tailpieces, Throw Members 


Conventional Mortise Cylinder Cams 

Part Number Application Price 

1396 Cam kit for conventional cylinders $127.00 

A09890-000-00 Adapter ring for 1-1/2˝ diameter cylinders 28.70 

5622-STD Falcon MA CAM for conventional mortise cylinders, except MA381 

5620-STD Falcon MA CAM for conventional mortise cylinder MA381 inside function 

33.00 

5621-STD Falcon MA CAM for conventional mortise cylinder MA381 outside function 

10-Pack Price 

A08867-000-00 Falcon cyl. in Sargent and Yale (26) 

A09888-000-00 Falcon cyl. in Schlage L Series (13) 

48.80 

A09894-001-00 Falcon, Ilco, Lori and Schlage cyl. in M deadbolt functions (1) 33.00 

A09894-002-00 Arrow, Sargent, Yale cyl. in M deadbolt functions (2) 

A09894-003-00 Corbin Russwin cyl. in M deadbolt functions (3) 

A09894-021-00 Falcon cyl. in Monarch concealed VR Delta trim (21) 48.80 

A09894-022-00 Arrow, Sargent, Yale cyl. in Falcon Delta trim (22) 

A09894-023-00 Corbin Russwin cyl. in Falcon Delta trim (23) 

A09897-000-00 Falcon M Series non-deadbolt functions (4) 33.00 

A09897-024-00 Falcon dogging cyl. in Falcon device (24) 

A09898-000-00 Adams Rite 4070 (16) 

A09899-000-00 Adams Rite MS (6) 

A20065-000-00 M381 outside (14) 

A20069-000-00 Corbin Russwin ML2200 48.80 

Cylinder Tailpieces, Rim and Conventional Cylindrical 

Part Number Application Price 

1389 Tailpiece kit (assortment of tailpieces and 1416 cap tool) $159.00 

B600-045 D Series double cylinder (1-3/8" - 1-3/4" doors) 

B600-046 D Series double cylinder (over 1-3/4" - 2-1/4" doors) 

1.00 

B520-651 D Series single cylinder (1-3/8" - 1-3/4" doors) 

B520-652 D Series single cylinder (over 1-3/4" - 2-1/4" doors) 

2.10 

Q330-164 W Series 501, 511, 581, 711 Functions 

Q330-165 W Series 561 Function 

0.52 

030480-004-00 Y Series 0.74 

A08350-000-00 H101 0.74 

10-Pack Price 

A22164-000-00 X Series 561 (6 Pin) Elite & Troy 

A22164-001-00 X Series 561 (6 Pin) Hana, 955 

4.70 

A22164-002-00 X Series 571 (6 Pin) Elite & Troy, 571 (7 Pin) Hana 6.70 

A22169-000-00 X Series 411, 501, 511, 521 (6 Pin) Elite & Troy 

A22169-002-00 X Series 411, 501, 511, 521 (6 & 7 Pin) Hana 

4.90 

A28351-000-00 Rim conventional 23.00 

A30034-001-00 H451, H461 7.30 

A30038-000-00 H511 4.90 

A30480-004-00 B Series 7.30 

A30730-001-00 RU, T Series most 6-pin 

A30730-002-00 RU, T Series most 7-pin and T571 6-pin 

A30730-003-00 RU381, T381 inside 6-pin, B611 16.20 

A30730-004-00 RU381, T381 inside 7-pin 

A30730-006-00 RU571, T571 7-pin 

Conventional Cylinder Tailpiece Retainers, Etc. 

Part Number Description 10-Pack Price 

A08355-000-00 Tailpiece retainer for rim cylinder $20.50 

A008395-000-00 Tailpiece retaining washer for H101 0.22 

A12053-000-00 Tailpiece retainer, 22164 & 22169 6.30 

A24264-000-00 Tailpiece spacer 2.50 

A30037-000-00 Tailpiece retainer, 30034 & 30038 6.30 

B600-071 D Series Retainer Washer 1 pack / 0.20 

44.70 

33.00 

CYL-12 



Cylinder Parts and Service Equipment 


Cylinder Collars (also used for IC cylinders) 

605, 606 

Part Number Size Shape 626 613, 625 

A08790-000 9 / 32" 

A08790-001 13 / 32 " Straight Protective 

A08790-002 17 / 32 " used on escutcheon $9.60 $11.60 

A08790-003 21 / 32" trim 

A08790-004 55 / 64" 

A08794-000 9 / 32 " 

A08794-001 13 / 32" Tapered Protective 

A08794-002 17 / 32" used on sectional trim 

9.50 11.50 

A08794-003 21 / 32 " 

008876-000 1 / 8 " 

008876-005 3 / 16" 

008876-001 1 / 4 " 

008876-002 3 / 8 " 

Blocking Ring 3.70 4.30 

008876-003 1 / 2 " 

008876-004 5 / 8 " 

008862-000 n/a Rim Cylinder 3.50 4.10 

See below for wave washer. Protective rings listed above include wave washer. 

PIN KIT 

Other Parts 

Part Number Application Pack Qty. Pkg. Price 

008789-001-60 Wave washer - $1.10 

012162-000-10 Cylinder cap - 1.50 

031100-000-30 Hex nut for cam lock and mortise cylinders - 7.00 

A02750-000-00 Cam Screw 100 16.30 

A03039-000-00 Mortise hotel function instruction plate packet - 6.30 

A12165-000-00 Cap retaining pin 10 5.10 

A12165-100-00 Cap retaining pin 100 40.00 

A12166-000-00 Spring for retaining pin 100 7.20 

Pin Kits, Pins, Tools and Service Equipment 

Part Number Application Pack Qty. Pkg. Price 

1416 Cylinder cap tool - steel $33.00 

1417 Pin kit for restricted keyways (inculdes follower and cyl. Cap tool) 192.00 

1418 Pin kit, standard (inculdes follower and cyl. Cap tool) 254.00 

1421 Plug follower 13.30 

1453 Depth key set, 5-pin 

1453-1 Depth key set, 6-pin - 

34.10 

1453-2 Depth key set, 7-pin 43.00 

030113-000-60 Key gauge for standard keys (.018" systems) 

030166-T10-30 Torx Screw Bit #10 

5.90 



17.60 

042613-000-60 Key gauge for restricted keyways (.025" systems) 20.30 

35-057 Extractor Tool 

A08552-000-00 Universal top pin 

A08553-00X-00 Bottom pins, 0 thru 9: replace; "x" with size (.018" systems) 

6.20 

A08554-000-00 Tumbler springs 7.60 

A08556-000-00 Construction master pins 100 17.90 

A08580-00X-00 Master pins, 2 thru 9: replace; "x" with size (.018" systems) 

A48553-00X-00 Bottom pins, 0 thru 6: replace; "x" with size (.025" systems) 6.20 

A48580-00X-00 Master pins, 2 thru 6: replace; "x" with size (.025" systems 



CYL-13

IC Cams, Throw Members, etc. 

IC Products 

IC Mortise Cylinder Cams 

Part Number Description Price 

1397 Cam kit $164.00 

10-Pack Price 

5622-IC 

Falcon MA CAM for SFIC mortise cylinders, except MA381 

5620- IC Falcon MA CAM for SFIC mortise cylinders MA381 inside function 

5621-IC 

Falcon MA CAM for SFIC mortise cylinders MA381 outside function 

A12667-000-00 Sargent / Yale (7) 

A12667-001-00 Adams Rite MS (8) 

A12667-002-00 Adams Rite 4070 

A12667-003-00 Straight (5), M series non-deadbolt functions 

A12667-006-00 Corbin Russwin master ring (25) (requires bushing A09890) $44.60 pkg of 10 

A12667-007-00 M series deadbolt functions (10) 

A12667-008-00 Schlage L Series (12) 

A12667-011-00 Corbin Russwin, Arrow (11) 

A12667-013-00 Corbin Russwin DL4000 

A12667-020-00 Falcon concealed vertical rod Delta trim (20) 

A12667-03A-00 Sargent 7737 

A20278-000-00 M381 outside (15) 

IC Throw Members (Tailpieces) and Spacers for Cylindrical Locksets 

022175-000-30 X Series except X571, new style 

022175-001-30 X571 new style 6-pin 

022175-002-30 X571 new style 7-pin 

030739-000-30 RU, T Series most 6-pin 

030739-001-30 RU, T Series most 7-pin 

030739-002-30 RU381, T381 inside 6-pin 

030739-003-30 RU381, T381 inside 7-pin 

Q001-055 B & Y Series 

Q330-168 W Series Levers 3.10 

Q330-169 W Series Knobs 3.10 

A12689-000-00 Rim $8.10 pkg. of 10 

A12698-000-00 Retainer, IC rim cylinder $12.60 pkg. of 10 

A12742-001-00 Coupler and tailpiece D Series 3.90 

Cylinder Collars 

See page CYL-13 for cylinder collars. – 

Other Parts 

A12663-001-00 Throw pins, package of ten (10) 


A12663-003-00 Throw pins, package of ten (10) $9.90 pkg. 


A12664-010-00 Drive washer, package of ten (10) 

002807-000-30 Mortise cylinder security screw 0.52 

D111/D211 

D141/D241 

D121/D221 

D131/D231 

D251/D271 

$2.20 

D261/D261M 

1³⁄₈” to 1⁷⁄₈" 

B520-651 

1.6” 

B520-667 

1.265” 

B600-045 

0.67” 

B520-653 

B600-041 

2.875” 2.4” 

Door Range: 

>1⁷⁄₈” to 2¹⁄₄” 

B520-652 

2.0” 

NA 

B600-046 

0.95” 

NA 

NA 

SFIC:

IC Service Equipment & Supplies 

IC Products 

Tools 

Part Number Description Price Each 

1208 Key bitting punch machine, standard A2 System $2,649.00 

1392 Capping pin, Best style capping 27.40 

1393 Capping block, Best style capping 127.00 

1398 Core and key stamping fixture 148.00 

1400 IC mortise cyl. assy./ disassembly tool set w/punch 190.00 

1401 IC mortise cyl. assy./ disassembly tool 174.00 

1402 IC cam staking center punch 15.90 

1405 Ejector tool 18.00 

1407 Mortise cylinder installation wrench 29.60 

1411 Pinning block set, Falcon spring cover cores 99.50 

1414 Pinning block only, Falcon spring cover cores 66.30 

1415 Tamping Plate 36.30 

012612-000-60 Key Gauge (A2 System) 12.10 

012727-000-30 Emergency tool, for M301, 311, 321 2.10 

030425-000-60 Key Gauge (A4 System) 12.10 

031034-000-30 A4 System depth bar for key bitting punch 181.00 

Pin Kits 

1404 (standard) Pin kit, A2 System complete in wooden case; Falcon spring cover cores 

1391 Pin kit, A2 System complete in wooden case; Best style capping $595.00 

1403 Pin kit, A4 System complete in wooden case; Falcon spring cover cores 

1390 Pin kit, A4 System complete in wooden case; Best style capping 

Pins, Springs, etc. 

A12635-0xx-00 A2 top pins, #2 through #19; replace “xx” with size, 100/pkg 

A12636-0xx-00 A2 bottom pins, #0 through #9; replace “xx” with size, 100/pkg $9.10 pkg 

A30375-0xx-00 A4 top pins, #1 through #11; replace “xx” with size, 100/pkg 

A30376-0xx-00 A4 bottom pins, #0 through #5; replace “xx” with size, 100/pkg 

A12637-000-00 Tumbler Spring, 100/pkg. 7.60 pkg 

A12637-500-00 Tumbler Spring, 500/pkg. 25.10 pkg 

A12638-000-00 Caps for Best style cores, 500/pkg. 

A12639-001-00 Spring cover, 6-Pin, 100/pkg. 22.90 pkg 

A12639-002-00 Spring cover, 7-Pin 100/pkg. 



CYL-15

Keying and Stamping Charges 

Master Keying 


50-210F Conventional cylinder Master Keyed (MK), Grand Master Keyed (GMK), 

Emergency Master Keyed (EMK), and Single Keyed (SKD) groups 

Interchangeable core Master Keyed (MK), Grand Master Keyed (GMK), 

– 

Emergency Master Keyed (EMK), and Single Keyed (SKD) groups 

$11.70 

No Charge 

Construction Keying – Conventional Cylinder 


50-211F Cylinder Construction Keyed (CK) 

$3.80 

50-224F Cylinder Block-O-Keyed (BOK) 

60-000F Pack change keys independently for construction keying No Charge 

Other Keying (Non-Masterkeyed) 


– 

Cylinder keyed different (KD) or keyed alike to a Falcon selected 

combination (KA) in sets of 2 or more 

No Charge 

– Cylinder 0-bitted or 1-bitted, as applicable No Charge 

50-212F Conventional cylinder keyed to a specific combination $6.50 

50-215F Standard cylinder extra key charge 4.80 

50-232F IC core extra key charge 5.20 

60-001F Pack change keys independently for non-construction keying 0.40 per key 

Notes: 1) Any cylinder operated by keys other than its own change key, or Single Keyed (SKD) groups within a 

masterkey system are subject to masterkeying charges. The Falcon Masterkey department determines 

and makes the final decision in the selection and use of key. 100% system expansion is allowed for 

new masterkey systems, unless otherwise specified. 

2) Construction keyed cylinder charges are in addition to masterkeying charges. 

3) PKI (Pack Keys Independently) packaging is included at no additional charge. 

4) Construction keying is not available with SFIC cylinders. Construction cores may be ordered for 

interchangeable core locks and for mortise and rim cylinders, for use during construction. See 

Construction Core Program. 

5) Block-O-Key construction keying requires 6-pin cylinders. 

6) Construction keys must be ordered separately. See Keys & Keyblanks. 

7) Conventional cylinders are available 0-bitted. 

8) Conventional restricted key section cylinders are furnished 1-bitted unless otherwise specified. 

9) Falcon locks and cylinders are furnished with Falcon G key section, keyed differently (KD) unless 

otherwise specified. 

10) Falcon SFIC cylinders are furnished with A keyway, uncombinated, without keys when not specified. 

11) SFIC cylinders are furnished uncombinated without keys when not specified. 

12) All 50-xxx charges are subject to a 50% discount unless quoted otherwise. 

13) All 50-xxx charges are added as separate line items and priced separately. 

CYL-16 



Keying and Stamping Charges 

Key & Core Stamping 

Price 

Part Number Description Standard I-Core 

VKC – Visual Key Control, standard symbols (AA1, AA2, etc. on keys (2) 

50-216F and/or cylinders. Designate CKC for I-Core marked on side. CKC not $3.40 - 

available for standard cylinders. 

50-217F VKC – Visual Key Control, per extra key (more than 2 per lock) 1.40 $1.40 

50-233F 

Non-standard code letters or numbers than industry standard 

key symbols on key (5 max.) 

3.40 3.40 

50-226F 

Non-standard code letters or numbers than industry standard key 

symbols on core or cylinder (5 max.) 

3.40 3.40 

50-229F Serial numbering (in addition to any other stamping) per key 1.40 1.40 

Special & Custom Die Stamps 


50-219F 

Keys stamped with custom or special dies – i.e, STATE OF FLORIDA, DO NOT 

DUPLICATE, etc. 

$1.40 

50-230F Die with standard letter and/or numbers – die remains property of Falcon Lock Co. 844.00 

50-234F Die with custom logo or typeface – die remains property of Falcon Lock Co. 

Send art work for 

quotation 

Bitting Lists (Keying Transcripts) 


50-123F 

Bitting list for factory masterkeyed products (requires written authorization 

from end-user on letterhead) 

$130.00 

50-120F Establish new masterkey system for field masterkeying, up to 50 bittings. 118.00 

50-121F Each additional bitting for field masterkeying. 0.80 

- Request special quotation for large or complex systems - 

Residential Masterkeying 


50-223F Residential style masterkeying $3.80 



CYL-17

Notes 

CYL-18 



Introduction 

Miscellaneous 


Padlocks 

MSC-2 

Complete Lock Pricing 

MSC-3 

Cable Locks 

MSC-4 


MSC-5 

Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

Padlocks, Parts and Accessories . . . . . . .MSC-6 

Complete Padlocks 

MSC-8 

Lock Mounts . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

How To Order 




MSC-1


Padlocks 

Available in: 

606 

Padlocks 

Finish 

Cat No. Description 606 

955-1P Deadlocking type - 1" shackle $112.40 

955-2P Deadlocking type - 2" shackle 

955-6P Deadlocking type - 6" shackle 

121.90 

Notes: 1) Key is removable with shackle in locked position only. 

2) Falcon padlocks now discount as complete locks and not as parts. 

Options 

Description 

Cylinders 

5-pin (drilled for 6) 

Standard 

6-pin 

No Charge 

7-pin (per cylinder) $8.40 

Less cylinder Deduct $16.00 

Competitor’s keyways in standard cylinder model (see page 8) 

No Charge 

Keying 

Master keying, conventional cylinder 

See CYL-16 

Construction master keying, con ven tion al cylinder 

See CYL-16 

Price 

MSC-2 



Introduction 

Padlocks • Auxiliary Products 

Standard Features for Commercial Series Padlocks - Stock 

Certification 

Lock Body 

Shackle 

Cylinder* 

Meets or exceeds ASTM standards for standard steel shackle, shackle cutting and 

corrosion resistance. 

Chrome plated brass - resists corrosion. 

Hardened steel alloy, double deadbolt locking mechanism. 

Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from 

other manufacturers. 

*All padlocks supplied less cylinder. Cylinders must be ordered separately. 

Standard Features for Commercial Series Cables - Interchangeable Core 

Lock Head 

Cable 

Cylinder* 

Die-cast zinc, 407 satin finish 

Braided steel vinyl coated for greater cut resistance than twisted cables 

Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from 

other manufacturers. 

*All cables supplied less cylinder. Cylinders must be ordered separately. 

Important Ordering Information 

Locks must be ordered in case quantities; this does not apply to factory ordered Falcon branded 955 Series locks. 

Case quantity is listed with each product. All prices listed are unit prices. Note: All Falcon cylinders will ship 

separately. 



MSC-3

Auxiliary Products • Cable Locks 

10 Series - 1/4" Shackle diameter 20 Series - 5/16" Shackle diameter 

40 Series - 3/8" Shackle diameter 

KC Series - 2', 4' lengths 

MSC-4 



Padlocks 

Commercial Series • Auxiliary Products 

Padlocks - Small Format Interchangeable Core (SFIC) - Less Cylinder 

Shackle Dimensions 

Part Number A B C List Price 

Solid Brass Body - KS11 2 Series (Body Dimensions: 1 25/32" wide, 2 3/16 " high, 7/8" thick) 

KS11D1200 1/4" (6.4mm) 1 1/2" (38mm) 3/4" (19mm) $33.70 

KS11F1200 2" (51mm) 35.10 

Chrome Plated Brass Body - KS21 Series (Body Dimensions: 1 25/32" wide, 2 3/16" high, 7/8" thick) 

KS21D1200 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) $35.80 

KS21F1200 2" (51mm) 37.50 

Chrome Plated Brass Body - KS41 Series (Body Dimensions: 1 15/16" wide, 2 3/16" high, 7/8" thick) 

KS41D1200 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) $35.80 

KS41F1200 2" (51mm) 37.50 

Notes: 1) Product is shipped without cylinder. For cylinder options: see Cylinders. 

2) Keying options: see Keys & Keying. See Terms & Conditions for more information. 

3) Case quantity is 6. 

Cables - SFIC - Less Cylinder 

Part Number Cable Diameter Cable Length List Price 

Braided Steel Key Cable - KC2 Series 

KC215A130 5/8" (15mm) 2' (60cm) $67.90 

KC215B130 5/8" (15mm) 4' (121cm) 72.70 

Notes: 4) Product is shipped without cylinder. For cylinder options: see Cylinders. 

5) Keying options: see Keys & Keying. See Terms & Conditions for more information. 

6) Case quantity is 1. 




separately. 



MSC-5

Auxiliary Products • Commercial Series 

Padlocks, Parts and Accessories 

10 Series Shackles 



3/4” 1 1/2” 2“ 4“ 

3/4” 1 1/2” 2“ 4“ 

3/4” 1 1/2” 2“ 4“ 

Commercial Series: Replacement Shackles 

Shackle Dimensions 

Part Number A B C List Price 

Hardened Steel Shackle - For Use with 10 Series Padlocks 

KZ11A10 3/4" (19mm) $5.90 

KZ11D10 1/4" (6.4mm) 1 1/2" (38mm) 3/4" (19mm) 7.20 

KZ11F10 2" (51mm) 7.30 

KZ11G10 4" (102mm) 10.30 


KZ11A20 3/4" (19mm) $7.20 

KZ11D20 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) 8.90 

KZ11F20 2" (51mm) 9.30 

KZ11G20 4" (102mm) 12.90 


KZ11A40 3/4" (19mm) $9.00 

KZ11D40 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) 12.70 

KZ11F40 2" (51mm) 13.40 

KZ11G40 4" (102mm) 18.40 

Brass Shackle - For Use with 10 Series Padlocks 

KZ12A10 3/4" (19mm) $5.90 

KZ12D10 1 1/2" (38mm) 3/4" (19mm) 7.20 

KZ12F10 1/4" (6.4mm) 2" (51mm) 7.30 

KZ12G10 4" (102mm) 10.30 


KZ12A20 3/4" (19mm) $7.20 

KZ12D20 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) 8.90 

KZ12F20 2" (51mm) 9.30 

KZ12G20 4" (102mm) 12.90 


KZ12A40 3/4" (19mm) $9.00 

KZ12D40 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) 12.70 

KZ12F40 2" (51mm) 13.40 

KZ12G40 4" (102mm) 18.40 

Note: 1) Case quantity is 6. 

Commercial Series: Accessories 


Nickel Plated Steel Chain 

KZ200AL Retaining 9" Nickel Plated Steel Chain $9.00 

Note: 2) Case quantity is 6. 




separately. 

MSC-6 



Parts and Accessories - Stock 

Commercial Series • Auxiliary Products 

Commercial Series - Replacement Parts 


Kit - Padlock & Cables 

KZ390AL Service Repair Kit $529.00 

Replacement Parts - Padlocks - SFIC 

KZ35AA1 Shackle Spring, 10 Series $0.54 

KZ35AA2 Shackle Spring, 20 Series, 80 Series 0.54 

KZ35AA3 Shackle Spring, 40 Series, 90 Series 0.54 

KZ35AA4 Shackle Spring, 70 Series 0.54 

KZ35AB1 Shackle Mounting Screw, 10, 20, 40 Series 1.60 

KZ35AB2 Shackle Mounting Screw, 70,80,90 Series 1.60 

KZ35AC1 Locking Ball Bearing, 10,20,40,80, 90 Series 1.20 

KZ35AC2 Locking Ball Bearing, 70 Series 1.70 

KZ35EC1 Bumper, 10, 20 Series 0.84 

KZ35EC2 Bumper, 40 Series 0.84 



KZ31CA1 Locking Cam, 10,20,40,80,90 Series 2.70 

KZ31CA2 Locking Cam, 70 Series 2.70 

KZ31CB1 Key Retaining Locking Cam, 10,20,40,80,90 Series 1.60 

KZ31CB2 Key Retaining Locking Cam, 70 Series 1.60 

KZ31CC1 Steel Retainer Plate, 10,20,40,80,90 Series 1.30 

KZ31CC2 Steel Retainer Plate, 70 Series 1.30 

KZ31CD0 Steel Retainer Plate Screw 2.00 

KZ31DA0 Throw Member 3.10 

KZ37000 Installation Tool 4.10 

Replacement Parts - Cables 

KZ33CA0 Throw Member, SFIC $5.10 

KZ33DB0 Washer, SFIC 0.54 

KZ34DC0 Throw Member Mounting Screw, SFIC 1.30 

KZ36EA0 Dust Cover, SFIC 2.20 

KZ36EB0 Dust Cover Screw, SFIC 0.74 

Note: 1) Case quantity is 30 except: KZ38BA1, KZ38BA2 - case quantity 20; KZ3700 - case quantity 6; KZ390AL - case quantity 1. 



MSC-7

Auxiliary Products • Complete Padlocks 

Kryptonite by Schlage 

Commercial KS Padlock Series Padlock Series Parts 

Exploded View - 

Exploded 

SFIC 

View - SFIC 

Dust Cover Screws 

Dust Cover 

KC Series Cable Parts 

SFIC 

Cylinder 

Throw Member 

Lock Head 

Washer 

Throw Member 

Mounting Screw 

MSC-8 



Special Security • Auxiliary Products 

855101 855118 855125 855132 

855149 994848 

Specialty Security Products 

Security Hasps 

Part Number Body Dimension Price Each 

855101 8 1/2" x 4 1/2" 3 $42.50 

855118 7 3/4" x 1 3/4" 6 13.40 

855125 5" x 2" 6 12.90 

855132 4 1/4" x 1 5/8" 6 14.90 

855149 7 1/4" x 1 5/8" 6 13.40 

Hasp 

994848 4 1/2" x 1 5/8 6 $6.90 



MSC-9

Auxiliary Products • Lock Mounts 

No. 21 No. 22 No. 23 No. 24 No.35-410 No. 002086-000-70 

Lock Mounts 

Part Number For Product Backset Price 

21 B, T and W Lever Series 

22 D, X, Y and W Knob Series 

23 H Series 

24 RU Series 

35-MA MA Series (101) 

36-MA MA Series (371, 381, 411, 431, 441) 2-3/4" $103.00 

37-MA MA Series (521, 551, 561, 581) 

38-MA MA Series (301, 311, 321) 

39-MA MA Series (531, 541, 571, 621, 641) 

40-MA MA Series (451) 

002086-000-70 Acrylic Mounting Ring N/A 29.10 

Note: 

1) For MA Series, locks must be 1-3/4" door thickness and left handed. 

MSC-10 





Product Index 

Index-1 

005099-000 . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

001911-001-70 . . . . . . . . . . . . . . . . .CYL-9, CYL-10 

002086-000-70 . . . . . . . . . . . . . . . . . . . . . .MSC-10 

002762-000 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11 

002770-016-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12 

002807-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

005075 . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

005099-000 . . . . . . . . . . . . . . . . . . . . .MA-11, RU-4 

005099-000-30 . . . . . .B-5, H-5, T-9, X-4, X-5, Y-5 

005099-000-60 . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

005161-000 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-5 

005164-000 . . . . . . . . . . .B-5, H-5, RU-4, T-9, X-5 

008789-001-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008862-000 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008876-000 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008876-001 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008876-002 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008876-003 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008876-004 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

008876-005 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

01-043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-5 

01-044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-5 

01-045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-5 

01-046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, Y-5 

01-048 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4, Y-5 

01-049 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4, Y-5 

012162-000-10 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

012191-000-60 . . . . . . . . . . . . . . . . . . . . . .X-4, X-5 

012191-003-70 . . . . . . . . . . . . . . . . . . . . . .X-4, X-5 

012612-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

012727-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

021164-016 . . . . . .B-7, H-5, RU-11, T-12, X-7, Y-5 

022104-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

022105-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

022106-002-55 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

022108-000-60 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

022112-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

022175-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

022175-001-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

022175-002-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

022258-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022258-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022258-009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022290-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022920-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022950-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022950-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022953-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022980-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022980-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022980-009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022981-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

022986-001-50 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

024030-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

024416-012 . . . . . .B-7, H-5, RU-11, T-12, X-7, Y-5 

030113-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

030166-T10-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

030166-T15-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

030166-T20-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

030290 . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

030425-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

030480-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

030703-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030704-002-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030706-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030709-000-60 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030712-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030712-001-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030718-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030718-001-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030722-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030724-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030726-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030726-007-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030728-000 . . . . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030733-000-55 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

030739-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

030739-001-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

030739-002-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

1397 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

1398 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1404 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

1411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1416 . . . . . . . . . . . . . . . . . . . . . . . .CYL-12, CYL-13 

1417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

1418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

1421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

1453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

1453-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

1453-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

21 . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5, MSC-10 

22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

24 . . . . . . . . . . . . . . . . . . .MA-10, CYL-9, MSC-10 

250 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-7 

251 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

252 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

253 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

314691 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

314692 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

314693 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

314694 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

31471S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

315491 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

315492 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

315493 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

315494 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

330055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

35-057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

35-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

36-071 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

36-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

37-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

38-031 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

38-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

39-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

40-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-10 

50-120F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-121F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-123F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-210F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

50-211F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

50-212F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

50-215F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

50-216F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-217F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-219F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-223F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-224F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

50-226F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-229F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-230F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-231F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

50-232F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

50-233F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

50-234F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-17 

5133-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

5161 . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4 

5164 . . . . . . . . . . . . . . . . .B-5, B-6, RU-4, T-9, X-4 

5183 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

5185 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

5185-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

5186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

5187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

5188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

5189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

5620- IC . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

5620-STD . . . . . . . . . . . . . . .CYL-2, CYL-8, CYL-12 

5621-IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

030739-003-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

030740-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030740-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030740-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030742-000 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030742-001 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030742-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030744-000 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030744-001 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030744-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030755-005-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12 

030831-004-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12 

030926-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030926-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030926-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030927-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030927-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030927-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030928-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030928-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030928-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030929-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030929-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030929-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030930-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030930-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030930-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030996-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10 

030996-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

030996-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

031034-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

031100-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

031416-000-70 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

031452-000 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10 

031453-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031471 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031471-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031471-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031472-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031473-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031474 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031474-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031477 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031477-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

031511-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

031514-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

031515-004-30 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

031519-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

031531-006-30 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

031533-006-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12 

031541-006-30 . . . . . . . . . . . . . . . . . . . . . . . .RU-11 

031700-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

031701-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

031702-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

031703-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

031705-000-30 . . . . . . . . . . . . . . . . . . . . . . . . . .B-7 

031718-000 . . . . . . . . . . . . . . . . . . . . . . . . .B-7, X-7 

031719-000 . . . . . . . . . . . . . . . . . . . . . . . . .B-7, X-7 

031741-000-50 . . . . . . . . . . . . . . . . . . . . . . . . . .B-7 

031748-000-70 . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

031749-000-70 . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

042613-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

10-064 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

10-087 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

10-092 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

10-094 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

10-095 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

12-626 . . . . . . . . . . . . . . . . . . . . . . .D100-7, D200-7 

1208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1387 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11, T-11 

1388 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11, T-11 

1389 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

1390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1391 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1392 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1393 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

1396 . . . . . . . . . . . . . . . . . . . . . . . . .MA-11, CYL-12



Product Index 

Index- 2 

5621-STD . . . . . . . . . . . . . . .CYL-2, CYL-8, CYL-12 

5622-IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

5622-STD . . . . . . . . . . . . . . . . . . . . .CYL-8, CYL-12 

57420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57431 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57435 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, B-6 

57620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57631 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

57635 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

60-000F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

60-001F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-16 

61-509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

61-510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

855101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

855118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

855125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

855132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

855149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

92320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

92321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

92330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

92331 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

945 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8 

950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

955-1P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2 

955-2P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2 

955-6P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2 

984D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

98535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

98538 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

985D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2 

987 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8 

988 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8 

98835S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

98838S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

990 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8 

992 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8 

994848 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9 

A008395-000-00 . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A02750-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A03039-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A03519-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7 

A05133-004-630 . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A05183-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A05183-004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A05185-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-5 

A05185-004 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-5 

A05186-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A05187-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A05188-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A05189-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5 

A08350-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A08355-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A08552-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08553-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08554-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08556-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08580-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08790-000 . . . . . . . . . . . . . . . . . . . . . . . . . CYL-13 

A08790-001 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08790-002 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08790-003 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08790-004 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08794-000 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08794-001 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08794-002 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08794-003 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A08867-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09888-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09890-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A23160-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23161 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23161-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A23161-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23161-03 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23161-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23161-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23161-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23162 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23162-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A23165-02 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A23166 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23166-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23167-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23168-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23169 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23169-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

A23171-01 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23171-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23171-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23171-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23171-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23172-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23174 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A09894-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09894-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09894-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09894-021-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09894-022-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09894-023-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09897-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09897-024-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09898-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A09899-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A12053-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A12165-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A12165-100-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A12166-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A12635-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12636-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12637-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12637-500-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12638-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12639-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12639-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A12663-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12663-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12663-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12663-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12664-010-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-006-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-007-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-008-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-011-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-013-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-020-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12667-03A-00 . . . . . . . . . . . . . . . . . . . . . . CYL-14 

A12689-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12698-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A12742-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A20065-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A20069-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A20278-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14 

A22161-005-00 . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A22164-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A22164-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A22164-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A22169-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A22169-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A23151 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23151-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A23151-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23151-03 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23151-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23151-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23151-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3 

A23152 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23152-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3 

A23155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A23155-02 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A23159 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-4 

A23159-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23159-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A23160-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4



Product Index 

Index- 3 

A23174-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23174-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

A23260-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

A24264-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A28351-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A30028-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A30034-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30036-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A30037-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30038-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A30040-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

A30375-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A30376-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15 

A30480-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30730-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30730-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30730-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30730-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30730-006-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

A30746-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30747-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30748-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30748-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30749-060-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30749-070-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30753-00 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

A30753-01 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

A30756-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30756-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30758-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30758-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30759-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30759-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30760-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30760-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30761-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30765-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30767-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30767-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30769-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30769-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30773-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30773-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A30905-001-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30905-060-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30906-070-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30913-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A30913-001-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11 

A31469-001 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-002 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-003 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-004 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-01D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-02D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-03D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31469-04D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31517-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A31517-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A31518-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A31518-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12 

A31544-00 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10 

A31549-01D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31549-02D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31549-03D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31549-04D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4 

A31706-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31707-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31708-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31708-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31708-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31708-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31709-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31709-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31714-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A92330-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A92330-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A92331-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A92331-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A98535-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A98535-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A98538-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A98538-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A98835-0SD . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

A98838-0SD . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4 

AE77012-IE . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AE77012-IT . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AE77012-OC . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AE77012-OK . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AE77012-OP . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AE77012-OT . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AE77029-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AE77100-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AE77140-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AE77280-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AE77526-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS5813 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

AS75319 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76029-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76100-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76140-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76280-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76319 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76526-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10 

AS76853 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

B302-041 . . . . . . . . . . . . . . . . . . . . D100-7, D200-7 

B302-045 . . . . . . . . . . . . . . . . . . . .D100-7, D200-7 

B520-283 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

B520-298 . . . . . . . . . . . . . . . . . . . .D100-9, D200-9 

B520-649 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

B520-650 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

B520-651 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

B520-652 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

B520-662 . . . . . . . . . . . . . . . . . . .D200-9, D200-10 

B520-663 . . . . . . . . . . . . . . . . . . .D200-9, D200-10 

B600-018 . . . . .D100-7, D100-9, D200-7, D200-10 

B600-045 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

B600-046 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

B600-047 . . . . . . . . . . . .D100-9, D200-9, D200-10 

B600-048 . . . . . . . . . . . . . . . . . . .D200-9, D200-10 

B600-053 . . . . . . . . . . . .D100-9, D200-9, D200-10 

B600-066 . . . . . . . . . . . .D100-9, D200-9, D200-10 

B600-071 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12 

B600-078 . . . . . . . . . . . .D100-9, D200-9, D200-10 

B600-100 . . . . . . . . . . . .D100-9, D200-9, D200-10 

B600-101 . . . . . . . . . . . .D100-9, D200-9, D200-10 

C262 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C603-897 . . . . . . . . . . . .D100-9, D200-9, D200-10 

C606CCA . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

C607 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-7, CYL-11 

C607CCA . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

C942 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C959 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C987 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C988 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

C997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8 

E77012-IB . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77012-IC . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77012-IK . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77012-IP . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77306 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

E77307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

A31714-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31715-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31715-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31716-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31716-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31727-005-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A31739-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31739-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31750-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31750-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31751-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31751-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31764-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6 

A31767-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7 

A48553-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A48580-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13 

A57420-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57420-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57421-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57421-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57425-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57425-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57430-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57430-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57431-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57431-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57435-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57435-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57620-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57620-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57621-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57621-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57625-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57625-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57630-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57630-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57631-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5 

A57631-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57635-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5 

A57635-00D . . . . . . . . . . . . . . . . . . . . . . . . B-5, H-5 

A74420-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A74421-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A74425-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A74430-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A74431-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A74435-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A76429-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A76439-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5 

A7801-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7802-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7804-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7805-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7806-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7807-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7808-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7809-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7813-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7814-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7815-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7816-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7819-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7820-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7821-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7822-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7829-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7830-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7831-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7851-12-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7851-24-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7881-12-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A7881-24-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

A8737-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

A8737-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

A8737-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

A8737-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

A8737-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

A92320-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A92320-00D . . . . . . . . . . . . . . . . . . . . . . . . T-9, X-4 

A92321-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4 

A92321-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4



Product Index 

Index- 4 

F605-359 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-10 

J250-028 . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8 

J520-028 . . . . . . . . . . . . . . . . . . . . .D100-9, D200-9 

KB525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB531 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB544 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB565 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB566 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB567 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB573 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB574 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB577 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB578 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB584 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB591 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB593 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB608 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB609-1 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11 

KB609-1 . . . . . . . . . . . . . . . . . . . . . . . .CCA CYL-11 

KB609-2 . . . . . . . . . . . . . . . . . . . . . CYL-10, CYL-11 

KB609-2CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

KB628 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB632-1 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11 

KB632-1CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

KB632-2 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11 

KB632-2CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11 

KB633 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB673-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB673-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB738-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB738-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB748 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB751 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB771 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB778-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB778-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB779-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB779-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB794 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB797 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB807-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB807-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB809-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB809-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB811-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB811-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB813-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB813-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

KB916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KB916-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10 

KC215A130 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KC215B130 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KS11D1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KS11F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KS21D1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KS21F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KS41D1200 . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-5 

KS41F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5 

KZ11A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11A20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11A40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

Q330-168 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-14 

Q330-169 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-14 

Q330-170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8 

Q330-175 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

Q330-176 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7 

Q330-177 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

Q330-178 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7 

Q330-182 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8 

Q330-210 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-211 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-215 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

Q330-237 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q330-238 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q330-239 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-241 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-242 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-243 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-245 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q330-246 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q330-247 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-248 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-249 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-250 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-251 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-253 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

Q330-254 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7 

Q330-256 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7 

Q330-257 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7 

Q330-270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11 

Q330-271 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11 

Q330-272 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11 

Q330-273 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11 

Q330-276 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9 

Q330-282 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8 

Q500-010 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-012 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-014 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-021 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-046 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-054 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-056 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-057 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-058 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-059 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-064 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-066 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-067 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-069 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-070 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q500-072 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

R525-256 . . . . . . . . . . . . . . . . . . . .D100-9, D200-9 

S76012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10 

S76206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76306 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76802 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76806 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S76816 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

S77801-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77804-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77805-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77811-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77815-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77816-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77819-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

S77820-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9 

KZ11F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11F20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11F40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ11G10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ11G20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ11G40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ12A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ12A20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ12A40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ12D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ12D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ12D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ12F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ12F20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ12F40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6 

KZ12G10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ12G20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ12G40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ200AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6 

KZ31CA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31CA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31CB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31CB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31CC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31CC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31CD0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ31DA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ33CA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ33DB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ34DC0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AA3 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AA4 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35AC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35EC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35EC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35EC3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ35EC4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ36EA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ36EB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

KZ37000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-7 

KZ390AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7 

M204-198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11 

PE1396 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11 

Q001-046 . . . . . . . . . . . . . . . . . . . . . .B-5, H-5, Y-5 

Q001-048 . . . . . . . . . . . . . . .B-5, H-5, T-9, X-5, Y-5 

Q001-049 . . . . . . . . . . . . . . .B-5, H-5, T-9, X-5, Y-5 

Q001-055 . . . . . . . . . . . . . . . . . . . . . . . .Y-5, CYL-14 

Q033-066 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q033-067 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q033-068 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q033-069 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q033-070 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q033-071 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q033-072 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q033-073 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q033-074 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q033-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q033-076 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q033-077 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q033-078 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q033-079 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-152 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q330-153 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4 

Q330-154 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q330-155 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3 

Q330-156 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-157 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-159 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-160 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-161 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6 

Q330-164 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-12 

Q330-165 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-12 

Q330-166 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5 

Q330-167 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5

Table Of Contents 

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 

Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 

Factors Affecting Exit Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 

New Nomenclature Conversion Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

Exit Devices 

19-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 

19-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 

19 Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 

24-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 

24-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 

24-C Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16 

24-C-WDC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 

24 Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 

25-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22 

25-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24 

25-M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26 

25-C Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28 

25-C-WDC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30 

25 Series Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32 

XX-R Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36 

XX-V Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38 

XX-M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40 

XX-C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42 

XX-C-WDC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-44 

XX Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 

Accessories 

Powers Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33 

Electric Power Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33 

DE5101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33 

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 

Trim - How to Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 

Trim / Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-53 

Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 

Cylinder Dogging Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 

Dummy Touch Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 

Electric and Alarm Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 

Extension Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 

Mortise Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 

Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 

Sex Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 

Shim Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 

SLM Blocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 

Parts 

19 Series Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 

24 Series Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-60 

25 Series Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62 

XX Series Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-64 

19 Series Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 

8500 Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 

Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 

24 Series Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67 

25 Series Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-70 

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-72 

Prices subject to change without notice 

Price Book 2011 • Effective January 31, 2011 • Rev. 1/11

General Information 

All products listed meet ANSI A156.3 Grade 1 standard. 

Devices will be furnished for hollow metal doors 3'0" x 7'0" x 1-3/4" full flush, with 5/8" high frame stops 

unless specified otherwise. 

DOOR WIDTHS 

EXIT DEVICES for door widths exceeding 4'0" are custom applications. Specify the exact door width and consult 

factory for price and availability. For device widths on narrow stile aluminum and glass doors, consult factory. 

DOOR THICKNESS 

EXIT DEVICES are furnished at prices listed for door thicknesses of 1 3/4" with standard centerlines. Other door 

thicknesses and/or offset installations may require additional charges for the device, trim, control and/or strike. 

Consult factory. 

DOOR HEIGHTS/DEVICE CENTERLINE 

SURFACE and CONCEALED VERTICAL ROD DEVICES for heights over 7'0" up to 8'0", extension rods are furnished 

at no additional charge. For heights over 8'0" up to 10'0" extension rods are furnished at prices shown on page 56. 

For doors higher than 10'0" or when centerline is other than standard, specify exact height. Consult factory for price. 

161 OR 86 DOOR PREPARATIONS 

When devices will apply over a 161 or 86 door preparation, consult factory. 

DEVICE MOUNTING SCREWS 

Machine screws are furnished with Fire Exit Devices. Sheet metal screws are furnished with Panic Devices. Machine 

screws can be substituted at no additional charge, specify AMS. 

SUBSTITUTION OF OUTSIDE TRIM OR STRIKES 

When other than standard is desired, deduct price of standard and add price of item used. Check catalog for 

compatibility. 

ELECTRIC ACCESSORIES 

When specifying Electrical Products, consult catalog or factory to insure all coordinating accessories have been 

considered. All electric devices must use respective power supply for warranty to apply. 

FINISHES 

BHMA US Description BHMA US Description 

600 USP Prime Coat 626 US26D Chromium, dull 

605 US3 Brass, polished 628 US28 Anodized Aluminum 

606 US4 Brass, dull 629 US32 Stainless Steel, polished 

612 US10 Bronze, dull 630 US32D Stainless Steel, satin 

613 US10B Brass, dull--oxidized--oil rubbed 689 SP28 Lacquer Sprayed Aluminum 

619 US15 Satin Nickel Plated, Clear-coated 695 SP313 Sprayed Duranodic 

622 US19 Dull Black, painted 710 313AN Anodized Duranodic 

625 US26 Chromium, polished 

Reference Notes: 

When split finish is desired, the finish listed first is understood to be the outside finish. 

SP28 and SP313 contain certain exposed parts that are molded from black plastic material or black powder coated finish. 


1 Price Book 2011 • Effective January 31, 2011 • Rev. 1/11

RHR 

LHR 

F 

B 

A 

E 

D 

(To finished floor) 

Handing Diagrams 

Single Door 

C 

Single Door 

Same Egress – Double Door 

Double Egress – Double Door 

LHR 

RHR 

LHR 

LHR 

Factors Affecting Exit Devices 

 

A 

B 

C 

D 

E 

F 

Door Width 

Specify exact door width. This determines what size device 

is supplied. If door width not specified, 3' is furnished 

standard. 

Stile Width 

Determines which series can be used because of the 

dimension of the active or inactive case. In conjunction with 

the door width, the width of the device is also affected. 

Door Height 

Rod lengths and extension rod requirements for surface 

vertical or concealed vertical rod devices are determined by 

height. 

Undercut 

Bottom rods and bottom latches or bolts for vertical rod 

applications are affected by the distance between the 

bottom of the door and the surface to which the strike will 

apply; 1/4" minimum, 3/4" maximum. 

Thickness 

When trim is used with a device it is affected by thickness 

as is the length of fasteners and cylinders. 

Stop Height 

The type of strike and affect on backsets is 

determined by the stop (5/8" standard) 

Glass Bead 

In the case of touch bar devices, series 19, 24 and 25, 

glazing bead or trim can interfere with the device requiring 

shim kits with modified trim and/or device. 

Fire Labels 

As a component of a fire door assembly, exit devices must 

meet special requirements. 

Other 

Factors such as transom panels, sill conditions and 

astragals can affect exit device selection 

Pairs 

When devices will occur on paired door leaves, order them 

together. 

Materials 

Unusual door or frame materials can affect device selection 

such as channel iron frames, blade stop frames, hollow core 

doors and mineral core doors. 


Price Book 2011 • Effective January 31, 2011 • Rev. 1/11 

2

How to Order 

How to Order Sequence Example 

Prefixes 

CD 

LD 

RX 

DM 

LM 

KOR 

ED 

EL 

FSA 

FSE 

EA 

HWEA 

Rating 

F 

Blank 

Cylinder Dogging 

Less Dogging 

Touchbar Request to Exit 

Latchbolt and Device Monitor Switch 

Latchbolt Status Switch 

Key Bypass Switch 

Electric Dogging 

Electric Latch Retraction 

Electric Lock or Unlock Trim-Fail Safe 

Electric Lock or Unlock Trim-Fail Secure 

Exit Alarm 

Hardwire Exit Alarm 

Fire Exit Hardware 

Panic Exit Hardware 

Device Series 

19 Touch Bar Device 

24 Touch Bar Device, Narrow Stile 

25 Touch Bar Device 

XX Crossbar Device 

Device Type 

R Rim C Concealed Vertical rod 

V Surface Vertical Rod C-WDC Concealed Vertical rod 

M Mortise Wood Door 

Trim Function (see Trim pages for all functions) 

EO Exit Only K Knob 

DT Dummy Trim L Lever (Dane Standard) 

NL Night Latch TL Thumb Lever 

C Cylinder Trim Less Pull NL-OP Night Latch Pull by other 

TP Thumbpiece KIL Key in Lever 

Latch Option 

DL Dead Locking 

Finish 

US3 US10 US26 US32 SP28 

US4 313AN US26D US32D SP313 

EL F 25 V L-DANE US3 3' LHR LBR SNB WD 

Door Width 

3' Standard Default 

4' 

Door Thickness 

1-3/4" Standard 

2-1/4" Optional 

Handing 

RHR Right Hand Reverse 

LHR Left Hand Reverse 

Less Bottom Rod 

LBR Less Bottom Rod 

LBR-AFL LBR w/Auxiliary Fire Pin 


CYL Cylinder SNB Sex Bolts AMS All Machine Screws 

SK Shim Kit SLM SLM Blocking 

Other Miscellaneous Door Information (see page 9 for details) 

HMD Hollow Metal Door SCDC Steel Channel Door Construction _ Door Label (20 min, 45 min, 90 min 1-1/2 hr) 

HMF Hollow Metal Frame _ Specify other Door or Frame _ Stile Width 

WD Wood Door Material information _ Frame Stop Height 

WDF Wood Frame _ Door Height SGL Single Door 

ALD Aluminum Door _ Door Thickness PR Pair of Doors Swinging Same Direction 

ALF Aluminum Frame _ Door Undercut DE Double Egress Doors 

Not all options are available on all series, consult customer service. 

For Special Order Product Quotes: Email: vdi_specials@irco.com Fax: 1-877-730-6248 


17 Series to 24 Series 18 Series to 25 Series 

Conversion Table 

Old New Trim Old New Trim 

(F)17-R (F)24-R No Change (F)18-R (F)25-R See Below 

(F)17-V (F)24-V No Change (F)18-V (F)25-V See Below 

(F)17-C (F)24-C No Change (F)18-C (F)25-C See Below 

(F)17-C-WDC (F)24-C-WDC No Change (F)18-C-WDC (F)25-C-WDC See Below 

(F)18-M (F)25-M See Below 

18 Series to 25 Series Trim 

Old Old Trim New Old Old Trim New 

812L Lever Trim 510L 810TP Apollo 512TP 

812L-NL Lever Trim 510L-NL 810NL Apollo 512NL 

812L-DT Lever Trim 510L-DT 810DT Apollo 512DT 

812L-BE Lever Trim 510L-BE 810TP-BE Apollo 512TP-BE 

816L Vandal Resistant 511L 811K Knob 513K 

820TP Vanguard 512TP 811K-NL Knob 513K-NL 

820NL Vanguard 512NL 811K-DT Knob 513K-DT 

820DT Vanguard 512DT 811K-BE Knob 513K-BE 

820TP-BE Vanguard 512TP-BE 717DT Delta 717DT 

814KIL Key in Lever Discontinued 

17/18 Strikes to 24/25 Strikes 

Old New 24 Series 25 Series Comments 

F490 299 X X Need 650106 retrofit kit for existing prep 

F490 299F X X Need 650106 retrofit kit for existing prep 

565 1439 X X 

F570 299 X X Need 650106 retrofit kit for existing prep 

F570 299F X X Need 650106 retrofit kit for existing prep 

571 1609 X X 

579 1606 Not recommended X 

No Equivalent 499F Not offered X 

No Equivalent 264 X X 

19 P Series Trim Changes 

Old New Trim/Control Old New Trim/Control 

1953DT 920DT Trident 1910L 912L-Dane Control 

1955P 920NL Trident 1910L-NL 912L-NL-Dane Control 

1904 PULL ONLY 917DT Centron 1920L LS/LK 912L-BE-Dane Control 

2301BE 930EO Centron 1980L-DT 912L-DT-Dane Control 

2303DT 930DT Centron 1919L 912L-Quantum Control 

2302C 930C Centron 1919L-NL 912L-NL-Quantum Control 

2305P 930NL Centron 1929L LS/LK 912L-BE-Quantum Control 

1909P 910NL Control 1989L-DT 912L-DT-Quantum Control 

1906T 910TP Control 1912L 912L-Sutro Control 

1926T LS/LK 910TP-BE Control 1912L-NL 912L-NL-Sutro Control 

1908DT 910DT Control 1922L-BE 912L-BE-Sutro Control 

1907K 911K Control 1982L-DT 912L-DT-Sutro Control 

1907K-NL 911K-NL Control 2400KIL w/IC Core 914KIL-IC Key in Lever 

1927K LS/LK 911K-BE Control 2400KIL 914KIL-KD Key in Lever 

1937K-DT 911K-DT Control 2401KIL LS/LK 914KIL-BE Key in Lever 

1911L 912L AVALON Control 2402KIL-NL 914KIL-NL-KD Key in Lever 

1911L-NL 912L-NL AVALON Control 

1921L LS/LK 912L-BE AVALON Control 

1981LDT 912L-DT AVALON Control 



4

19-R Device Series 

Devices are priced 3', complete with standard trim and strikes. 

Cylinders are not included in price unless noted. 

EXIT HARDWARE 

Rim Devices 

SP28 

(Price includes F570 Strike) Trim/Control SP313 US32D 

19-R-EO - 321 582 

Trident Trim 

■ 19-R-DT 920DT 365 626 

■ 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

19-R-NL 920NL 397 658 

Centron Trim 

19-R-EO 930EO 361 622 

19-R-DT 930DT 365 626 

19-R-NL 930NL 382 643 

19-R-C 930C 375 636 

19-R-DT 917DT 356 617 

Control Trim 

19-R-DT ✽ 918DT 449 815 

19-R-NL ✽ 918NL 449 815 

19-R-DT ◆ 910DT 449 815 

19-R-NL ◆ 910NL 449 815 

19-R-TP ◆ 910TP 449 815 

19-R-TP-NL ◆ 910TP-NL 449 815 

19-R-TP-BE ◆ 910TP-BE 449 815 

Knob Control 

19-R-K 911K 449 815 

19-R-K-BE 911K-BE 449 815 

19-R-K-NL 911K-NL 449 815 

19-R-K-DT ◆ 911K-DT 449 815 

Dane Lever Control 

19-R-L ▲ 912L 498 854 

19-R-L-BE ▲ 912L-BE 498 854 

19-R-L-NL ▲ 912L-NL 498 854 

19-R-L-DT ▲ 912L-DT 498 854 

Key in Lever 

19-R-KIL 914-KIL-KD 534 795 

19-R-KIL-NL 914-KIL-NL-KD 534 795 

19-R-KIL-BE 914-KIL-BE 534 795 

19-R-KIL-IC 914-KIL-IC 583 844 

REFERENCE NOTES: 

For Standard and Optional Trims/Controls, refer to page 48. 

For Standard and Optional Strikes, refer to page 46. 

For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge. 

● Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. 

■ Handing: 920 Series trims are handed and not field reversible. Specify handing RHR or LHR. 

▲ The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. 

✽ Available 2/28/2011. 

◆ Available until 2/25/2011. Trim to be discontinued effective 2/28/2011. 

Sex Bolts: 

Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. 

Note: prices shown are for 3' length, for 4' length add $25.00 to list price. 



FIRE EXIT HARDWARE 

Rim Devices 


Device Series F-19-R 



SP28 

(Price includes F570 Strike) Trim/Control SP313 US32D 

F-19-R-EO – 406 681 

Trident Trim 

■ 

■ 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

F-19-R-DT 920DT 450 725 

F-19-R-NL 920NL 482 757 

Centron Trim 

F-19-R-EO 930EO 446 721 

F-19-R-DT 930DT 450 725 

F-19-R-NL 930NL 467 742 

F-19-R-C 930C 460 735 

F-19-R-DT 917DT 441 716 

Control Trim 

F-19-R-DT ✽ 918DT 534 914 

F-19-R-NL ✽ 918NL 534 914 

F-19-R-DT ◆ 910DT 534 914 

F-19-R-NL ◆ 910NL 534 914 

F-19-R-TP ◆ 910TP 534 914 

F-19-R-TP-NL ◆ 910TP-NL 534 914 

F-19-R-TP-BE ◆ 910TP-BE 534 914 

Knob Control 

F-19-R-K 911K 534 914 

F-19-R-K-BE 911K-BE 534 914 

F-19-R-K-NL 911K-NL 534 914 

F-19-R-K-DT ◆ 911K-DT 534 914 


F-19-R-L ▲ 912L 583 953 

F-19-R-L-BE ▲ 912L-BE 583 953 

F-19-R-L-NL ▲ 912L-NL 583 953 

F-19-R-L-DT ▲ 912L-DT 583 953 

Key in Lever 

F-19-R-KIL 914-KIL-KD 619 894 

F-19-R-KIL-NL 914-KIL-NL-KD 619 894 

F-19-R-KIL-BE 914-KIL-BE 619 894 

F-19-R-KIL-IC 914-KIL-IC 668 943 




For KIL functions with US32D device, trim finish is furnished SP28. Cylinder provided at no charge. 


■ Handing: 920 Series trims are handed and not field reversible. Specify handing RHR or LHR. 




Sex Bolts: 

Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. Sex 

Bolts are required and added to the order for additional center case mounting when device is used with wood, composite or 

non-reinforced hollow metal doors. See chart below for quantities and list prices. 

Application Sex Bolt 2729 List Add 

All Applications 2 $13 



6

19-VDevice Series 


Cylinders and Sex Bolts are not included in price unless noted. 

EXIT HARDWARE 

Surface Vertical Rod Devices 

SP28 

(Price includes 3788 and 2130 Strikes ) Trim/Control SP313 US32D 

● 19-V-EO – 487 963 

Trident Trim 

● 19-V-DT ■ 920DT 531 1007 

● 

● 

● 

● 

● 

● 

● 

● 

19-V-NL ■ 920NL 563 1039 

Centron Trim 

19-V-EO 930EO 527 1003 

19-V-DT 930DT 531 1007 

19-V-NL 930NL 548 1024 

19-V-C 930C 541 1017 

19-V-DT 917DT 522 998 

Control Trim 

19-V-DT ✽ 918DT 615 1196 

19-V-NL ✽ 918NL 615 1196 

● 19-V-DT ◆ 910DT 615 1196 

● 19-V-NL ◆ 910NL 615 1196 

● 19-V-TP ◆ ● 910TP 615 1196 

● 19-V-TP-NL ◆ ● 910TP-NL 615 1196 

● 19-V-TP-BE ◆ ● 910TP-BE 615 1196 

Knob Control 

● 19-V-K 

● 

911K 615 1196 

● 19-V-K-BE 

● 

911K-BE 615 1196 

● 19-V-K-NL 

● 

911K-NL 615 1196 

● 19-V-K-DT ◆ 911K-DT 615 1196 


● 19-V-L ▲ ● 912L 664 1235 

● 19-V-L-BE ▲ ● 912L-BE 664 1235 

● 19-V-L-NL ▲ ● 912L-NL 664 1235 

● 19-V-L-DT ▲ ● 912L-DT 664 1235 

Key in Lever 

● 19-V-KIL ● 914-KIL-KD 700 1176 

● 19-V-KIL-NL ● 914-KIL-NL-KD 700 1176 

● 19-V-KIL-BE ● 914-KIL-BE 700 1176 

● 19-V-KIL-IC ● 914-KIL-IC 749 1225 





For door heights over 7' up to 8', extension rod is furnished at no additional charge. 

For door heights over 8' up to 10', see page 56 for extension rod add. 

● Handing: 19-V Devices are handed and field reversible. Devices and handed Trim are furnished RHR when handing is not specified. 

■ Handing: 920 Series Trim are handed and not field reversible. Specify handing RHR or LHR. 




Sex Bolts: 

Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. 

Optional Sex Bolts are recommended for latch mounting when device is used with hollow core, composite or light gauge 

hollow metal doors. See chart below for quantities and list prices. 








Device Series F-19-V 



SP28 

(Price includes 3788 and 2130 Strikes ) Trim/Control SP313 US32D 

● F-19-V-EO – 624 1088 

Trident Trim 

● F-19-V-DT 

■ 

920DT 668 1132 

● F-19-V-NL 

■ 

920NL 700 1164 

Centron Trim 

● 

F-19-V-EO 930EO 664 1128 

● 

F-19-V-DT 930DT 668 1132 

● 

F-19-V-NL 930NL 685 1149 

● 

F-19-V-C 930C 678 1142 

● 

F-19-V-DT 917DT 659 1123 

Control Trim 

● F-19-V-DT ✽ 918DT 752 1321 

● F-19-V-NL ✽ 918NL 752 1321 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

F-19-V-DT ◆ 910DT 752 1321 

F-19-V-NL ◆ 910NL 752 1321 

F-19-V-TP ◆ ● 910TP 752 1321 

F-19-V-TP-NL ◆ ● 910TP-NL 752 1321 

F-19-V-TP-BE ◆ ● 910TP-BE 752 1321 

Knob Control 

F-19-V-K 

● 

911K 752 1321 

F-19-V-K-BE 

● 

911K-BE 752 1321 

F-19-V-K-NL 

● 

911K-NL 752 1321 

F-19-V-K-DT ◆ 911K-DT 752 1321 


F-19-V-L 

▲ ● 912L 801 1360 

F-19-V-L-BE 

▲ ● 912L-BE 801 1360 

F-19-V-L-NL 

▲ ● 912L-NL 801 1360 

F-19-V-L-DT 

▲ ● 912L-DT 801 1360 

Key in Lever 

F-19-V-KIL ● 914-KIL-KD 837 1301 

F-19-V-KIL-NL ● 914-KIL-NL-KD 837 1301 

F-19-V-KIL-BE ● 914-KIL-BE 837 1301 

F-19-V-KIL-IC ● 914-KIL-IC 886 1350 





For door heights over 7' up to 8', extension rod is furnished at no additional charge. 

● 

■ 

▲ 

✽ 

◆ 

For door heights over 8' up to 10', see page 56 for extension rod add. 

Handing: F-19-V Devices are handed and field reversible. Devices and handed Trim are furnished RHR when handing is not specified. 

Handing: 920 Series Trim are handed and not field reversible. Specify handing RHR or LHR. 

The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. 

Available 2/28/2011. 

Available until 2/25/2011. Trim to be discontinued effective 2/28/2011. 

Sex Bolts: 

Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. Sex 

Bolts are required and added to the order for additional latch case mounting when device is used with wood, composite or 

non-reinforced hollow metal doors. See chart below for quantities and list prices. 






8

19 Device Options 


Not for use with Fire Exit Hardware 

Prefix 

CD Cylinder Dogging available on all 19 series Panic Devices. 57 

LD Less Dogging available on all 19 series panic devices 25 

List Add 


Suffix 

LBR Available with UL Fire Label at no additional charge on F-19-V devices. NC 

Fire rated LBR devices must be ordered in pairs of Vertical Rod Devices. 

For Fire Rated Devices specify one device LBR and second device LBR-AFL. 

Second device provided with a Fire Pin. 

Device Monitoring 

Prefix 

List Add 

RX Touch Bar Request to Exit Switch available on all 19 series devices. 203 

RX device monitoring switch can be used in combination with a second RX switch. 

Add $203 list. 

KOR Key Override - Override device monitoring on a door by use of a keyed cylinder. 53 

KOR must be used in combination with a device monitoring switch. 

Exit Alarm 

Prefix 

List Add 

EA Exit Alarm available on all 19 series Rim Panic and Fire Devices. 372 

Not recommended for use with 19 Vertical Rod Panic or Fire Devices. 

Not available with KOR. 9 Volt battery included. 

HWEA Hard-Wired Exit Alarm available on all 19 series Rim Panic and Fire Devices. 761 

Not recommended for use with 19 Vertical Rod Panic or Fire Devices. 

PS902 Power Supply required and must be used for warranty to apply. 

Not available with KOR. See page 20 for pricing, 

HWK 

Hard-Wired Adapter for field installation to eliminate 9 volt battery, 

order part number 650305 389 



Notes 



10




EXIT HARDWARE 

Rim Devices 

(Price includes 299 Strike) 

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

24-R-EO ― 948 1203 1007 1161 1208 1232 1208 1232 1319 

24-R-NL-OP 

― 

948 1203 1007 1161 1208 1232 1208 1232 1319 

Delta Trim 

24-R-DT 717DT 1099 1387 1191 1378 1425 1449 1359 1383 1536 

24-R-DT 

24-R-NL 

24-R-C 

24-R-TP 

24-R-TP-BE 

24-R-DT 

24-R-NL 

24-R-TP 

24-R-TP-BE 

24-R-K 

24-R-K-BE 

24-R-K-NL 

24-R-K-DT 

24-R-L 

24-R-L-BE 

24-R-L-NL 

24-R-L-DT 

718DT 1239 1368 1172 1394 1441 1465 1499 1523 1552 

718NL 1099 1387 1191 1378 1425 1449 1359 1383 1536 

718C 1066 1354 1158 1326 1373 1397 1326 1350 1484 

718TP 1199 1537 1341 1495 1542 1566 1459 1483 1653 

718TP-BE 1199 1537 1341 1495 1542 1566 1459 1483 1653 

Control Trim 

710DT 1090 1408 1212 1419 1466 1490 1350 1374 1577 

710NL 1090 1408 1212 1419 1466 1490 1350 1374 1577 

710TP 1090 1408 1212 1419 1466 1490 1350 1374 1577 

710TP-BE 1090 1408 1212 1419 1466 1490 1350 1374 1577 

Knob Control 

711K 1090 1408 1212 1419 1466 1490 1350 1374 1577 

711K-BE 1090 1408 1212 1419 1466 1490 1350 1374 1577 

711K-NL 1090 1408 1212 1419 1466 1490 1350 1374 1577 

711K-DT 1090 1408 1212 1419 1466 1490 1350 1374 1577 


712L 1230 1501 1305 1480 1527 1551 1490 1514 1638 

712L-BE 1230 1501 1305 1480 1527 1551 1490 1514 1638 

712L-NL 1230 1501 1305 1480 1527 1551 1490 1514 1638 

712L-DT 1230 1501 1305 1480 1527 1551 1490 1514 1638 


For Standard and Optional Trims/Controls, refer to page 49-50. 


24 Series devices with trims furnished in SP313. 

Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. 


Supplied as NL less trim 


Sex Bolts: 

Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood, 

composite or light gauge hollow metal doors. See chart below for quantities and list prices. 

Application Sex Bolt 325 Sex Bolt 425 List Add 

EO (exit only device) 2 4 $64 

Device with Trim Not Required 4 32 




EXIT HARDWAR E 

Rim Devices 

(Price includes 299F Strike) 

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

F-24-R-EO ― 1111 1366 1170 1324 1371 1395 1371 1395 1482 

F-24-R-NL-OP 

― 

1111 1366 1170 1324 1371 1395 1371 1395 1482 

Delta Trim 

F-24-R-DT 717DT 1354 1541 1546 1699 1612 1402 1550 1522 1588 

F-24-R-DT 

F-24-R-NL 

F-24-R-C 

F-24-R-TP 

F-24-R-TP-BE 

F-24-R-DT 

F-24-R-NL 

F-24-R-TP 

F-24-R-TP-BE 

F-24-R- K 

F-24-R-K-BE 

F-24-R-K-NL 

F-24-R-K-DT 

F-24-R-L 

F-24-R-L-BE 

F-24-R-L-NL 

F-24-R-L-DT 

718DT 1402 1531 1335 1557 1604 1628 1662 1686 1715 

718NL 1262 1550 1354 1541 1588 1612 1522 1546 1699 

718C 1229 1517 1321 1489 1536 1560 1489 1513 1647 

718TP 1362 1700 1504 1658 1705 1729 1622 1646 1816 

718TP-BE 1362 1700 1504 1658 1705 1729 1622 1646 1816 

Control Trim 

710DT 1253 1571 1375 1582 1629 1653 1513 1537 1740 

710NL 1253 1571 1375 1582 1629 1653 1513 1537 1740 

710TP 1253 1571 1375 1582 1629 1653 1513 1537 1740 

710TP-BE 1253 1571 1375 1582 1629 1653 1513 1537 1740 

Knob Control 

711K 1253 1571 1375 1582 1629 1653 1513 1537 1740 

711K-BE 1253 1571 1375 1582 1629 1653 1513 1537 1740 

711K-NL 1253 1571 1375 1582 1629 1653 1513 1537 1740 

711K-DT 1253 1571 1375 1582 1629 1653 1513 1537 1740 


712L 1393 1664 1468 1643 1690 1714 1653 1677 1801 

712L-BE 1393 1664 1468 1643 1690 1714 1653 1677 1801 

712L-NL 1393 1664 1468 1643 1690 1714 1653 1677 1801 

712L-DT 1393 1664 1468 1643 1690 1714 1653 1677 1801 


For Standard and Optional Trims/Controls , refer to page 49-50. 

For Standard and Optional Strikes , refer to page 46. 

24 Series devices with trims furnished in SP313 





Sex Bolts: 

Sex Bolts are required and added for center case mounting when device is used with wood, composite or non-reinforced hollow 

metal doors. See chart below for quanties and list prices 





EO (exit only device ) 2 4 $64 

Device with Trim Not Required 4 32 




12

24-V Device Series 





(Price includes 3788 and 2130 Strikes) Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

24-V-EO ― 1245 1586 1322 1525 1586 1617 1586 1617 1711 

24-V-NL-OP 

― 

1245 1586 1322 1525 1586 1617 1586 1617 1711 

Delta Trim 

24-V-DT 717DT 1396 1770 1506 1742 1803 1834 1737 1768 1928 

24-V-DT 

24-V-NL 

24-V-C 

24-V-TP 

24-V-TP-BE 

24-V-TL 

24-V-TL-BE 

24-V-TL-NL 

24-V-DT 

24-V-NL 

24-V-TP 

24-V-TP-BE 

24-V-K 

24-V-K-BE 

24-V-K-NL 

24-V-K-DT 

24-V-L 

24-V-L-BE 

24-V-L-NL 

24-V-L-DT 

718DT 1536 1751 1487 1758 1819 1850 1877 1908 1944 

718NL 1396 1770 1506 1742 1803 1834 1737 1768 1928 

718C 1363 1737 1473 1690 1751 1782 1704 1735 1876 

718TP 1496 1920 1656 1859 1920 1951 1837 1868 2045 

718TP-BE 1496 1920 1656 1859 1920 1951 1837 1868 2045 

719TL 1496 1837 1573 1792 1853 1884 1837 1868 1978 

719TL-BE 1496 1837 1573 1792 1853 1884 1837 1868 1978 

719TL-NL 1496 1837 1573 1792 1853 1884 1837 1868 1978 

Control Trim 

710DT 1387 1791 1527 1783 1844 1875 1728 1759 1969 

710NL 1387 1791 1527 1783 1844 1875 1728 1759 1969 

710TP 1387 1791 1527 1783 1844 1875 1728 1759 1969 

710TP-BE 1387 1791 1527 1783 1844 1875 1728 1759 1969 

Knob Control 

711K 1387 1791 1527 1783 1844 1875 1728 1759 1969 

711K-BE 1387 1791 1527 1783 1844 1875 1728 1759 1969 

711K-NL 1387 1791 1527 1783 1844 1875 1728 1759 1969 

711K-DT 1387 1791 1527 1783 1844 1875 1728 1759 1969 


712L 1527 1884 1620 1844 1905 1936 1868 1899 2030 

712L-BE 1527 1884 1620 1844 1905 1936 1868 1899 2030 

712L-NL 1527 1884 1620 1844 1905 1936 1868 1899 2030 

712L-DT 1527 1884 1620 1844 1905 1936 1868 1899 2030 




For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 


Handing: 24-V devices and noted Trims are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified. 




Sex Bolts: 

Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood, 


Latches Device Device 

Application Sex Bolt 425 Sex Bolt 425 Sex Bolt 325 List Add 

EO (exit only device) 6 2 2 $80 

Device with Trim 6 2 Not Required 64 

EO (exit only device) LBR 3 2 2 56 

Device with Trim LB R 3 2 Not Required 40 




FIRE EXIT HARDWAR E 


(Price includes 3788 and 2130 Strikes) Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

F-24-V-EO ― 1395 1736 1472 1675 1736 1767 1736 1767 1861 

F-24-V-NL-OP 

― 

1395 1736 1472 1675 1736 1767 1736 1767 1861 

Delta Trim 

F-24-V-DT 717DT 1546 1920 1656 1892 1953 1984 1887 1918 2078 

F-24-V-DT 

F-24-V-NL 

F-24-V-C 

F-24-V-TP 

F-24-V-TP-BE 

F-24-V-TL 

F-24-V-TL-BE 

F-24-V-TL-NL 

F-24-V-DT 

F-24-V-NL 

F-24-V-TP 

F-24-V-TP-BE 

F-24-V-K 

F-24-V-K-BE 

F-24-V-K-NL 

F-24-V-K-DT 

F-24-V-L 

F-24-V-L-BE 

F-24-V-L-NL 

F-24-V-L-DT 




718DT 1686 1901 1637 1908 1969 2000 2027 2058 2094 

718NL 1546 1920 1656 1892 1953 1984 1887 1918 2078 

718C 1513 1887 1623 1840 1901 1932 1854 1885 2026 

718TP 1646 2070 1806 2009 2070 2101 1987 2018 2195 

718TP-BE 1646 2070 1806 2009 2070 2101 1987 2018 2195 

719TL 1646 1987 1723 1942 2003 2034 1987 2018 2128 

719TL-BE 1646 1987 1723 1942 2003 2034 1987 2018 2128 

719TL-NL 1646 1987 1723 1942 2003 2034 1987 2018 2128 

Control Trim 

710DT 1537 1941 1677 1933 1994 2025 1878 1909 2119 

710NL 1537 1941 1677 1933 1994 2025 1878 1909 2119 

710TP 1537 1941 1677 1933 1994 2025 1878 1909 2119 

710TP-BE 1537 1941 1677 1933 1994 2025 1878 1909 2119 

Knob Control 

711K 1537 1941 1677 1933 1994 2025 1878 1909 2119 

711K-BE 1537 1941 1677 1933 1994 2025 1878 1909 2119 

711K-NL 1537 1941 1677 1933 1994 2025 1878 1909 2119 

711K-DT 1537 1941 1677 1933 1994 2025 1878 1909 2119 


712L 1677 2034 1770 1994 2055 2086 2018 2049 2180 

712L-BE 1677 2034 1770 1994 2055 2086 2018 2049 2180 

712L-NL 1677 2034 1770 1994 2055 2086 2018 2049 2180 

712L-DT 1677 2034 1770 1994 2055 2086 2018 2049 2180 




For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 


Handing: F-24-V Devices and noted Trims are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified. 




Sex Bolts: 

One 4122 Sex Bolt is supplied standard no charge for hinge side mouting. Sex Bolts are required and added to the order for 

center case and latch mounting when device is used with wood, composite or non-reinforced hollow metal doors. 

See chart below for quantities and list prices. 





EO (exit only device) LBR 3 2 2 56 

Device with Trim LBR 3 2 Not Required 40 




14

24-C Device Series 



EXIT HARDWARE 

Concealed Vertical Rod Devices 

(Price includes Strikes 4188 and 2130) Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

24-C-EO ― 1308 1635 1389 1602 1667 1700 1667 1700 1798 

Delta Trim 

24-C-DT 717DT 1459 1819 1573 1819 1884 1917 1818 1851 2015 

24-C-DT 

24-C-NL 

24-C-C 

24-C-TP 

24-C-TP-BE 

24-C-TL 

24-C-TL-BE 

24-C-TL-NL 

24-C-TLP 

24-C-TLP-BE 

24-C-TLP-NL 

24-C-K 

24-C-K-BE 

24-C-K-NL 

24-C-K-DT 

24-C-L 

24-C-L-BE 

24-C-L-NL 

24-C-L-DT 

718DT 1599 1800 1554 1835 1900 1933 1958 1991 2031 

718NL 1459 1819 1573 1819 1884 1917 1818 1851 2015 

718C 1426 1786 1540 1767 1832 1865 1785 1818 1963 

718TP 1559 1969 1723 1936 2001 2034 1918 1951 2132 

718TP-BE 1559 1969 1723 1936 2001 2034 1918 1951 2132 

719TL 1559 1886 1640 1869 1934 1967 1918 1951 2065 

719TL-BE 1559 1886 1640 1869 1934 1967 1918 1951 2065 

719TL-NL 1559 1886 1640 1869 1934 1967 1918 1951 2065 

719TLP 1559 1886 1640 1884 1949 1982 1918 1951 2080 

719LTP-BE 1559 1886 1640 1884 1949 1982 1918 1951 2080 

719TLP-NL 1559 1886 1640 1884 1949 1982 1918 1951 2080 

Knob Control 

711K 1450 1840 1594 1860 1925 1958 1809 1842 2056 

711K-BE 1450 1840 1594 1860 1925 1958 1809 1842 2056 

711K-NL 1450 1840 1594 1860 1925 1958 1809 1842 2056 

711K-DT 1450 1840 1594 1860 1925 1958 1809 1842 2056 


712L 1590 1933 1687 1921 1986 2019 1949 1982 2117 

712L-BE 1590 1933 1687 1921 1986 2019 1949 1982 2117 

712L-NL 1590 1933 1687 1921 1986 2019 1949 1982 2117 

712L-DT 1590 1933 1687 1921 1986 2019 1949 1982 2117 






Handing: All 24-C Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 



Sex Bolts: 

Optional Sex Bolts are recommended for center case when device is used with light gauge hollow metal doors. 




Device with Trim 2 Not Required 16 







F-24-C-EO ― 1458 1785 1539 1752 1817 1850 1817 1850 1948 

Delta Trim 

F-24-C-DT 717DT 1609 1969 1723 1969 2034 2067 1968 2001 2165 

F-24-C-DT 

F-24-C-NL 

F-24-C-C 

F-24-C-TP 

F-24-C-TP-BE 

F-24-C-TL 

F-24-C-TL-BE 

F-24-C-TL-NL 

F-24-C-TLP 

F-24-C-TLP-BE 

F-24-C-TLP-NL 

F-24-C- K 

F-24-C-K-BE 

F-24-C-K-NL 

F-24-C-K-DT 

F-24-C-L 

F-24-C-L-BE 

F-24-C-L-NL 

F-24-C-L-DT 

Devices Series F-24-C 



718DT 1749 2108 1704 1950 2181 2050 2108 2141 1985 

718NL 1609 1969 1723 1969 2034 2067 1968 2001 2165 

718C 1576 1936 1690 1917 1982 2015 1935 1968 2113 

718TP 1709 2119 1873 2086 2151 2184 2068 2101 2282 

718TP-BE 1709 2119 1873 2086 2151 2184 2068 2101 2282 

719TL 1709 2068 1790 2036 2215 2084 2101 1790 2019 

719TL-BE 1709 2036 1790 2019 2084 2117 2068 2101 2215 

719TL-NL 1709 2036 1790 2019 2084 2117 2068 2101 2215 

719TLP 1709 2036 1790 2034 2099 2132 2068 2101 2230 

719LTP-BE 1709 2036 1790 2034 2099 2132 2068 2101 2230 

719TLP-NL 1709 2036 1790 2034 2099 2132 2068 2101 2230 

Knob Control 

711K 1600 1990 1744 2010 2075 2108 1959 1992 2206 

711K-BE 1600 1990 1744 2010 2075 2108 1959 1992 2206 

711K-NL 1600 1990 1744 2010 2075 2108 1959 1992 2206 

711K-DT 1600 1990 1744 2010 2075 2108 1959 1992 2206 


712L 1740 2083 1837 2071 2136 2169 2099 2132 2267 

712L-BE 1740 2083 1837 2071 2136 2169 2099 2132 2267 

712L-NL 1740 2083 1837 2071 2136 2169 2099 2132 2267 

712L-DT 1740 2083 1837 2071 2136 2169 2099 2132 2267 






Handing: All F-24-C Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 



Sex Bolts: 

Sex Bolts are required and added to the order for center case mounting when device is used with non-reinforced hollow metal doors. 




Device with Trim 2 Not Required 16 




16

24-CWDC Device Series 



EXIT HARDWARE 

Wood Door Concealed Vertical Rod Devices 


24-CWDC-EO ― 1595 1995 1695 1954 2034 2074 2034 2074 2193 

Delta Trim 

24-CWDC-DT 717DT 1746 2179 1879 2171 2251 2291 2185 2225 2410 

24-CWDC-DT 

24-CWDC-NL 

24-CWDC-C 

24-CWDC-TP 

24-CWDC-TP-BE 

24-CWDC-TL 

24-CWDC-TL-BE 

24-CWDC-TL-NL 

24-CWDC-TLP 

24-CWDC-TLP-BE 

24-CWDC-TLP-NL 

24-CWDC-K 

24-CWDC-K-BE 

24-CWDC-K-NL 

24-CWDC-K-DT 

24-CWDC-L 

24-CWDC-L-BE 

24-CWDC-L-NL 

24-CWDC-L-DT 

718DT 1886 2160 1860 2187 2267 2307 2325 2365 2426 

718NL 1746 2179 1879 2171 2251 2291 2185 2225 2410 

718C 1713 2146 1846 2119 2199 2239 2152 2192 2358 

718TP 1846 2329 2029 2288 2368 2408 2285 2325 2527 

718TP-BE 1846 2329 2029 2288 2368 2408 2285 2325 2527 

719TL 1846 2246 1946 2221 2301 2341 2285 2325 2460 

719TL-BE 1846 2246 1946 2221 2301 2341 2285 2325 2460 

719TL-NL 1846 2246 1946 2221 2301 2341 2285 2325 2460 

719TLP 1846 2246 1946 2236 2316 2356 2285 2325 2475 

719LTP-BE 1846 2246 1946 2236 2316 2356 2285 2325 2475 

719TLP-NL 1846 2246 1946 2236 2316 2356 2285 2325 2475 

Knob Control 

711K 1737 2200 1900 2212 2292 2332 2176 2216 2451 

711K-BE 1737 2200 1900 2212 2292 2332 2176 2216 2451 

711K-NL 1737 2200 1900 2212 2292 2332 2176 2216 2451 

711K-DT 1737 2200 1900 2212 2292 2332 2176 2216 2451 


712L 1877 2293 1993 2273 2353 2393 2316 2356 2512 

712L-BE 1877 2293 1993 2273 2353 2393 2316 2356 2512 

712L-NL 1877 2293 1993 2273 2353 2393 2316 2356 2512 

712L-DT 1877 2293 1993 2273 2353 2393 2316 2356 2512 




For door heights over 7' up to 8',extension rod is furnished at no additional charge. For door heights 8' up to 10' see page 56 for extension rod add. 


Handing: All 24-CWDC Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 

The Dane lever is furnished standard. Optional lever designs, Avalon, Quantum and Sutro are available at no additional charge. 


Sex Bolts: 

Optional Sex Bolts are recommended for center case when device is used with hollow core or composite doors. 

See chart below for quantites and list prices. 









Wood Door Concealed Vertical Rod Devices 


F-24-CWDC-EO ― 1745 2145 1845 2104 2184 2224 2184 2224 2343 

Delta Trim 

F-24-CWDC-DT 717DT 1896 2329 2029 2321 2401 2441 2335 2375 2560 

F-24-CWDC-DT 

F-24-CWDC-NL 

F-24-CWDC-C 

F-24-CWDC-TP 

F-24-CWDC-TP-BE 

F-24-CWDC-TL 

F-24-CWDC-TL-BE 

F-24-CWDC-TL-NL 

F-24-CWDC-TLP 

F-24-CWDC-TLP-BE 

F-24-CWDC-TLP-NL 

F-24-CWDC- K 

F-24-CWDC-K-BE 

F-24-CWDC-K-NL 

F-24-CWDC-K-DT 

F-24-CWDC-L 

F-24-CWDC-L-BE 

F-24-CWDC-L-NL 

F-24-CWDC-L-DT 

Device Series F-24-CWDC 



718DT 2036 2310 2010 2337 2417 2457 2475 2515 2576 

718NL 1896 2329 2029 2321 2401 2441 2335 2375 2560 

718C 1863 2296 1996 2269 2349 2389 2302 2342 2508 

718TP 1996 2479 2179 2438 2518 2558 2435 2475 2677 

718TP-BE 1996 2479 2179 2438 2518 2558 2435 2475 2677 

719TL 1996 2396 2096 2371 2451 2491 2435 2475 2610 

719TL-BE 1996 2396 2096 2371 2451 2491 2435 2475 2610 

719TL-NL 1996 2396 2096 2371 2451 2491 2435 2475 2610 

719TLP 1996 2396 2096 2386 2466 2506 2435 2475 2625 

719LTP-BE 1996 2396 2096 2386 2466 2506 2435 2475 2625 

719TLP-NL 1996 2396 2096 2386 2466 2506 2435 2475 2625 

Knob Control 

711K 1887 2350 2050 2362 2442 2482 2326 2366 2601 

711K-BE 1887 2350 2050 2362 2442 2482 2326 2366 2601 

711K-NL 1887 2350 2050 2362 2442 2482 2326 2366 2601 

711K-DT 1887 2350 2050 2362 2442 2482 2326 2366 2601 


712L 2027 2443 2143 2423 2503 2543 2466 2506 2662 

712L-BE 2027 2443 2143 2423 2503 2543 2466 2506 2662 

712L-NL 2027 2443 2143 2423 2503 2543 2466 2506 2662 

712L-DT 2027 2443 2143 2423 2503 2543 2466 2506 2662 




For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights 8' up to 10', see page 56 for extension rod add. 


Handing: All F-24-CWDC Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when hand is not specified. 



Sex Bolts: 

90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC). 

Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors. 



Application 

Sex Bolt 325 Sex Bolt 425 Sex Bolt 325 List Add 

EO (exit only device) - SCDC - 2 2 $32 

Device x Trim - SCDC - 2 not required 16 


Note: prices shown are for 3' length, for 4' length add $25.00 to list price . 


18




Prefix 

List Add 

CD Cylinder Dogging available on all 24 series Panic Devices 57 

LD Less Dogging available on all 24 series Panic Devices 25 


Suffix 

List Add 

LBR Available with UL Fire Label at no additional charge on F-24-V and F-24-C devices. NC 


For Fire Rated Devices specify on device LBR and second device LBR-AFL. 


WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturer 

for UL Fire Ratings greater than 20 minutes. 

Deadlocking 

Prefix 

List Add 

DL Deadlocking Feature for Rim Devices only 74 

Deadlocking is supplied standard on Vertical and Concealed Vertical Devices. 

Electric Dogging / Electric Latch Retraction 

Prefix 

List Add 

ED Electric Dogging - Available on all 24 series Panic and Fire Devices 372 

Electrical Dogging cannot be used in combination with CD, EA, HWEA, EL or KOR options. 

EL Electric Latch Retraction - Available on all 24 series Panic and Fire Devices 506 

Electrical Latch cannot be used in combination with CD, ED, EA, HWEA or KOR options. 


Prefix 

List Add 

RX Touch Bar Request to Exit Switch available on all 24 series devices 203 

RX dogging monitoring switch can be used in combination with a second 

RX, DM or LM switch. Add $203 list. 

DM Touch Bar and Latch Bolt Monitoring Switch available on most 24 device series. 203 

Not available on F-24-R devices, with dual DM switches or in combination with LM switch. 

Device monitoring switches can be used in combination with a RX switch. Add $203 list. 

LM Latch Bolt Monitoring Switch available on most 24 device series. 203 

Not available on F-24-R devices, with dual LM switches or in combination with DM switch. 

LM device monitoring switch can be used in combination with a RX switch. Add $203 list. 



Exit Alarm 

Prefix 

List Add 

EA Exit Alarm For Surface Vertical Devices, specify device with DM (Device Monitor Switch). 372 

Add $203 list. 9 Volt battery included. Not available with KOR. 

HWEA Hard-Wired Exit Alarm available on 24-R and 24-V Panic and Fire Devices. 761 

For Surface Vertical Devices, specify device with DM (Device Monitor Switch). Add $203 list. 

9 Volt battery included. Not available with KOR. 

PS902 Power Supply required and must be used for warranty to apply. See page 20 for pricing. 

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery. 389 

Order part number 650305. 




Electrical Accessories 24 

Delayed Exit System 

Designed to meet NFPA 101 “Special Locking Arrangement” applications 

A complete delayed egress system requires several components not included with controller. Consult catalog for details. 

Model No. Description List Price 

DE5101 Logic Controller *15 Second Delay furnished standard 784 

*Over 15 second delay requires a letter of approval from authority having local jurisdiction. Fax Letter in with Sales Order. 

Order cannot be processed without the letter. 

Electric Power Transfers 

Model No. Description SP28 SP313 Wt.lbs./oz. 

EPT 2 Two 18 gauge wires 441 441 2.5 

EPT 10 Ten 24 gauge wires 467 467 2.5 

Power Supplies 

Standard Features 

• UL294 Listed for Access Control 

• Class 2 rated power limited output 

• Universal 110-220 VAC Input 

• Regulated and filtered DC outputs 

• AC input and DC output LED indicators 

1. Select Power Supply 

• Polarized Connectors for optional distribution boards 

• AC input status indication on outside cover 

• AC status monitor 

• 12˝ H x 14˝ W x 4˝ D enclosure 


PS902 Base Power Supply (2A @ 12/24 VDC field selectable) Approximate weight 9 lbs. 210 

PS902 is able to accept a total of 1 optional distribution board and 1 900-FA board. 

PS914 Base Power Supply (4A (High inrush) @ 12/24 VDC field acceptable.) Approximate weight 9 lbs. 593 

PS914 is able to accept a total of 2 optional distribution boards. 

BAA "Buy America Act" compliant power supply option 32 

will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials" 

When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices, the 2RS is furnished 

when board option not specified. 

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay) 

Model No. Description Part # List Price 

900-4R 4 Independently controlled relays 44489912-00 140 

900-4R-FA 4 Independently controlled relays with FA 190 

900-2RS 2 Relay board output (PS914 only) for controlling EL Exit Device 44489896-00 145 

900-2RS-FA 2 Relay board output with FA (PS914 only) for controlling EL Exit Device 195 

900-4RL 4 Relay board integrated logic for controlling security interlocks, 44489920-00 384 

auto operators and time delays. Campatible with EL Exit Devices. 

900-4RL-FA 4 Relay board integrated logic for controlling security interlocks, 44489920-00 434 

auto operators and time delays with FA. Campatible with EL Exit Devices. 

900-8F 8 fuse protected outputs 44489946-00 50 

900-8F-FA 8 fuse protected outputs with FA 100 

900-8P 8 PTC protected outputs 44489938-00 50 

900-8P-FA 8 PTC protected outputs with FA 100 

900-BBK Battery Backup Kit (includes two 7A/hr batteries) 44489961-00 200 

900-BB Battery Backup Board Only 44489953-00 100 

900-BAT Batteries Only (qty 2) 44487155-00 100 

3. Select Other Power Supply Options 


900-FA Fire Alarm Relay (EIR) module is a plug-in relay to provide an 44487247-00 50 

interface with fire or emergency override systems. 

PS902: May be installed directly on power supply or may be used with optional distribution boards. 

PS914: Must be used with optional distribution boards. 

900-KL Key Lock Cover 32 


20




EXIT HARDWARE 

Rim Devices 

Trim 

25-R-EO ― 813 1016 863 996 1036 1057 1036 1057 1166 

(Price includes 299 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

25-R-NL-OP ― 

813 1016 863 996 1036 1057 1036 1057 1166 

Lever - Dane 

25-R-L 510L 1111 1365 1161 1345 1392 1413 1334 1355 1522 

25-R-L-BE 

25-R-L-NL 

25-R-L-DT 

25-R-L 

25-R-TP 

25-R-TP-BE 

25-R-NL 

25-R-K 

25-R-K-BE 

25-R-K-NL 

25-R-K-DT 

25-R-DT 

25-R-DT 


510L-BE 1111 1365 1161 1345 1392 1413 1334 1355 1522 

510L-NL 1052 1296 1102 1276 1321 1342 1275 1296 1451 

510L-DT 1052 1296 1102 1276 1321 1342 1275 1296 1451 

VR Lever 

511L 1162 1416 1212 1396 1444 1465 1385 1406 1574 

Thumbpiece 

512TP 1080 1309 1130 1289 1380 1401 1303 1324 1510 

512TP-BE 1080 1309 1130 1289 1380 1401 1303 1324 1510 

512-NL 1027 1251 1077 1231 1312 1333 1250 1271 1442 

Knob 

513K 1037 1279 1087 1259 1342 1363 1260 1281 1472 

513K-BE 1037 1279 1087 1259 1342 1363 1260 1281 1472 

513K-NL 1037 1279 1087 1259 1342 1363 1260 1281 1472 

513K-DT 1037 1279 1087 1259 1342 1363 1260 1281 1472 

DT Pull 

717DT 964 1200 1047 1213 1253 1274 1187 1208 1383 

512DT 993 1198 1043 1178 1312 1333 1216 1237 1442 



Handing: 25-R Device is non-handed. Lever trims and 717DT are handed but field reversible. Trims are furnished RHR when handing is not specified. 



Sex Bolts: 

Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood, 



EO (exit only device) 8 $64 

Device x Trim 4 32 





Rim Devices 

(Price includes 299F Strike for single door applications only. For double door applications, specify 499F Strike and add $75 to list prices below) 




Trim Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

F-25-R-EO ― 976 1179 1026 1159 1199 1220 1199 1220 1329 

F-25-R-NL-OP 

― 

976 1179 1026 1159 1199 1220 1199 1220 1329 

Lever - Dane 

F-25-R-L 510L 1274 1528 1324 1508 1555 1576 1497 1518 1685 

F-25-R-L-BE 

F-25-R-L-NL 

F-25-R-L-DT 

F-25-R-L 

F-25-R-TP 

F-25-R-TP-BE 

F-25-R-NL 

F-25-R-K 

F-25-R-K-BE 

F-25-R-K-NL 

F-25-R-K-DT 

F-25-R-DT 

F-25-R-DT 

510L-BE 1274 1528 1324 1508 1555 1576 1497 1518 1685 

510L-NL 1215 1459 1265 1439 1484 1505 1438 1459 1614 

510L-DT 1215 1459 1265 1439 1484 1505 1438 1459 1614 

VR Lever 

511L 1325 1579 1375 1559 1607 1628 1548 1569 1737 

Thumbpiece 

512TP 1243 1472 1293 1452 1543 1564 1466 1487 1673 

512TP-BE 1243 1472 1293 1452 1543 1564 1466 1487 1673 

512-NL 1240 1414 1240 1394 1475 1496 1413 1434 1605 

Knob 

513K 1200 1442 1250 1422 1505 1526 1423 1444 1635 

513K-BE 1200 1442 1250 1422 1505 1526 1423 1444 1635 

513K-NL 1200 1442 1250 1422 1505 1526 1423 1444 1635 

513K-DT 1200 1442 1250 1422 1505 1526 1423 1444 1635 

DT Pull 

717DT 1127 1363 1210 1376 1416 1437 1350 1371 1546 

512DT 1156 1361 1206 1341 1475 1496 1379 1400 1605 




Handing: F-25-R Device is non-handed. Lever trims and 717DT are handed but field reversible. Trims are furnished RHR when handing is not specified. 



Sex Bolts: 

Sex Bolts are required and added to the order for center case mounting when device is used with wood, 

composite or non-reinforced hollow metal doors. See chart below for quantities and list prices. 







22

25-V Device Series 



EXIT HARDWARE 


(Price includes 3788 & 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

25-V-EO ― 1151 1447 1223 1410 1468 1496 1468 1496 1583 

25-V-NL-OP 

― 

1151 1447 1223 1410 1468 1496 1468 1496 1583 

Lever - Dane 

25-V-L 510L 1449 1796 1521 1759 1824 1852 1766 1794 1939 

25-V-L-BE 

25-V-L-NL 

25-V-L-DT 

25-V-L 

25-V-TP 

25-V-TP-BE 

25-V-NL 

25-V-K 

25-V-K-BE 

25-V-K-NL 

25-V-K-DT 

25-V-DT 

25-V-DT 

510L-BE 1449 1796 1521 1759 1824 1852 1766 1794 1939 

510L-NL 1390 1727 1462 1690 1753 1781 1707 1735 1868 

510L-DT 1390 1727 1462 1690 1753 1781 1707 1735 1868 

VR Lever 

511L 1500 1847 1572 1810 1876 1904 1817 1845 1991 

Thumbpiece 

512TP 1418 1740 1490 1703 1812 1840 1735 1763 1927 

512TP-BE 1418 1740 1490 1703 1812 1840 1735 1763 1927 

512-NL 1365 1682 1437 1645 1744 1772 1682 1710 1859 

Knob 

513K 1375 1710 1447 1673 1774 1802 1692 1720 1889 

513K-BE 1375 1710 1447 1673 1774 1802 1692 1720 1889 

513K-NL 1375 1710 1447 1673 1774 1802 1692 1720 1889 

513K-DT 1375 1710 1447 1673 1774 1802 1692 1720 1889 

DT Pull 

717DT 1302 1631 1407 1627 1685 1713 1619 1647 1800 

512DT 1331 1629 1403 1592 1744 1772 1648 1676 1859 



For door heights over 7' to 8', extension rod is furnished at no extra charge. For door heights over 8' to 10', see page 56 for extension rod add. 


Handing: 25-V Device is handed but field reversible. Lever trims and 717DT are handed but field reversible. The device and trims are furnished RHR when handing is not specified. 



Sex Bolts: 

Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood, 


Latches 

Device 



Device x Trim 6 2 64 

EO (exit only device) LBR 3 6 72 

Device x Trim LBR 3 2 40 






(Price includes 3788 & 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

F-25-V-EO ― 1349 1645 1421 1608 1666 1694 1666 1694 1781 

F-25-V-NL-OP 

― 

1349 1645 1421 1608 1666 1694 1666 1694 1781 

Lever - Dane 

F-25-V-L 510L 1647 1994 1719 1957 2022 2050 1964 1992 2137 

F-25-V-L-BE 

F-25-V-L-NL 

F-25-V-L-DT 

F-25-V-L 

F-25-V-TP 

F-25-V-TP-BE 

F-25-V-NL 

F-25-V-K 

F-25-V-K-BE 

F-25-V-K-NL 

F-25-V-K-DT 

510L-BE 1647 1994 1719 1957 2022 2050 1964 1992 2137 

510L-NL 1588 1925 1660 1888 1951 1979 1905 1933 2066 

510L-DT 1588 1925 1660 1888 1951 1979 1905 1933 2066 

VR Lever 

511L 1698 2045 1770 2008 2074 2102 2015 2043 2189 

Thumbpiece 

512TP 1616 1938 1688 1901 2010 2038 1933 1961 2125 

512TP-BE 1616 1938 1688 1901 2010 2038 1933 1961 2125 

512-NL 1563 1880 1635 1843 1942 1970 1880 1908 2057 

Knob 

513K 1573 1908 1645 1871 1972 2000 1890 1918 2087 

513K-BE 1573 1908 1645 1871 1972 2000 1890 1918 2087 

513K-NL 1573 1908 1645 1871 1972 2000 1890 1918 2087 

513K-DT 1573 1908 1645 1871 1972 2000 1890 1918 2087 

DT Pull 

F-25-V-DT 

717DT 1500 1829 1605 1825 1883 1911 1817 1845 1998 

F-25-V-DT 

512DT 1529 1827 1601 1790 1942 1970 1846 1874 2057 



For door heights over 7' up to 8', extension rod is furnished at no extra charge. For door heights over 8' up to 10', see page 56 for extension rod add. 


Handing: F-25-V Devices, Lever trims and 717DT trim are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified. 



Sex Bolts: 

Sex Bolts are required and added to the order for center case mounting and latch mounting when device is used with wood, composite 

or non-reinforced hollow metal doors. See chart below for quantities and list prices. 




Latches 

Device 




EO (exit only device) LBR 3 6 72 

Device x Trim LBR 3 2 

40 




24

25-M Device Series 




Mortise Lock Devices 


25-M-EO ― 1055 1318 1121 1292 1345 1371 1346 1372 1450 

25-M-NL-OP 

― 

1055 1318 1121 1292 1345 1371 1346 1372 1450 

Lever - Dane 

25-M-L 510L 1353 1667 1419 1641 1701 1727 1644 1670 1806 

25-M-L-BE 

25-M-L-NL 

25-M-L-DT 

25-M-L 

25-M-TP 

25-M-TP-BE 

25-M-NL 

25-M-K 

25-M-K-BE 

25-M-K-NL 

25-M-K-DT 

25-M-DT 

25-M-DT 

510L-BE 1353 1667 1419 1641 1701 1727 1644 1670 1806 

510L-NL 1294 1598 1360 1572 1630 1656 1585 1611 1735 

510L-DT 1294 1598 1360 1572 1630 1656 1585 1611 1735 

VR Lever 

511L 1404 1718 1470 1692 1753 1779 1695 1721 1858 

Thumbpiece 

512TP 1322 1611 1388 1585 1689 1715 1613 1639 1794 

512TP-BE 1322 1611 1388 1585 1689 1715 1613 1639 1794 

512-NL 1269 1553 1335 1527 1621 1647 1560 1586 1726 

Knob 

513K 1279 1581 1345 1555 1651 1677 1570 1596 1756 

513K-BE 1279 1581 1345 1555 1651 1677 1570 1596 1756 

513K-NL 1279 1581 1345 1555 1651 1677 1570 1596 1756 

513K-DT 1279 1581 1345 1555 1651 1677 1570 1596 1756 

DT Pull 

717DT 1206 1502 1305 1509 1562 1588 1497 1523 1667 

512DT 1235 1500 1301 1474 1621 1647 1526 1552 1726 




Handing: The 25-M Device is handed but not field reversible. Specify handing RHR or LHR. Lever Trim and 717DT are handed and field reversible. 

The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge 


Sex Bolts: 

Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood 



EO (exit only device ) 6 

$48 






Mortise Lock Devices 


F-25-M-EO ― 1205 1468 1271 1442 1495 1521 1496 1522 1600 

F-25-M-NL-OP 

― 

1205 1468 1271 1442 1495 1521 1496 1522 1600 

Lever - Dane 

F-25-M-L 510L 1503 1817 1569 1791 1851 1877 1794 1820 1956 

F-25-M-L-BE 

F-25-M-L-NL 

F-25-M-L-DT 

F-25-M-L 

F-25-M-TP 

F-25-M-TP-BE 

F-25-M-NL 

F-25-M-K 

F-25-M-K-BE 

F-25-M-K-NL 

F-25-M-K-DT 

F-25-M-DT 

F-25-M-DT 

510L-BE 1503 1817 1569 1791 1851 1877 1794 1820 1956 

510L-NL 1444 1748 1510 1722 1780 1806 1735 1761 1885 

510L-DT 1444 1748 1510 1722 1780 1806 1735 1761 1885 

VR Lever 

511L 1554 1868 1620 1842 1903 1929 1845 1871 2008 

Thumbpiece 

512TP 1472 1761 1538 1735 1839 1865 1763 1789 1944 

512TP-BE 1472 1761 1538 1735 1839 1865 1763 1789 1944 

512-NL 1419 1703 1485 1677 1771 1797 1710 1736 1876 

Knob 

513K 1429 1731 1495 1705 1801 1827 1720 1746 1906 

513K-BE 1429 1731 1495 1705 1801 1827 1720 1746 1906 

513K-NL 1429 1731 1495 1705 1801 1827 1720 1746 1906 

513K-DT 1429 1731 1495 1705 1801 1827 1720 1746 1906 

DT Pull 

717DT 1356 1652 1455 1659 1712 1738 1647 1673 1817 

512DT 1385 1650 1451 1624 1771 1797 1676 1702 1876 




Handing: The F-25-M device is handed but not field reversible. Specify hand RHR and LHR. Lever Trim and 717DT are handed and field reversible. 

The Dane lever is furnished standard. Optional lever desi gns Avalon, Quantum and Sutro are available at no additional charge. 


S ex B o lt s: 

Optional Sex Bolts are required for center case mountin g when device is used with hollow core wood, 

composite or li g ht g au g e hollow metal doors. See chart below for quantities and list prices. 

Device Series F-25-M 



Applicatio n Sex Bolt 425 List Add 

EO ( exit onl y device ) 6 $48 





26

25-C Device Series 



EXIT HARDWARE 


(Price includes 4188 and 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 

25-C-EO ― 1180 1505 1254 1447 1505 1535 1505 1535 1623 

Lever - Dane 

25-C-L 510L 1478 1854 1552 1796 1861 1891 1803 1833 1979 

25-C-L-BE 

25-C-L-NL 

25-C-L-DT 

25-C-L 

25-C-TP 

25-C-TP-BE 

25-C-NL 

25-C-K 

25-C-K-BE 

25-C-K-NL 

25-C-K-DT 

25-C-DT 

25-C-DT 

25-C-C 

510L-BE 1478 1854 1552 1796 1861 1891 1803 1833 1979 

510L-NL 1419 1785 1493 1727 1790 1820 1744 1774 1908 

510L-DT 1419 1785 1493 1727 1790 1820 1744 1774 1908 

VR Lever 

511L 1529 1905 1603 1847 1913 1943 1854 1884 2031 

Thumbpiece 

512TP 1447 1798 1521 1740 1849 1879 1772 1802 1967 

512TP-BE 1447 1798 1521 1849 1849 1879 1772 1802 1967 

512-NL 1394 1740 1468 1682 1781 1811 1719 1749 1899 

Knob 

513K 1404 1768 1478 1710 1811 1841 1729 1759 1929 

513K-BE 1404 1768 1478 1710 1811 1841 1729 1759 1929 

513K-NL 1404 1768 1478 1710 1811 1841 1729 1759 1929 

513K-DT 1404 1768 1478 1710 1811 1841 1729 1759 1929 

DT Pull 

717DT 1331 1689 1438 1664 1722 1752 1656 1686 1840 

512DT 1360 1687 1434 1629 1781 1811 1685 1715 1899 

Delta Trim 

718C 1298 1656 1405 1612 1670 1700 1623 1653 1788 



For door heights over 7' to 8', extension rod is furnished at no additional charge, For door heights 8' up to 10', see page 56 for extension rod add. 


Handing: 25-C Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 


Sex Bolts: 

Optional Sex Bolts are recommended for center case mounting when device is used with light gauge hollow metal doors. See chart below for quantities and list prices. 

Applicatio n Sex Bolt 425 List Add 

EO ( exit onl y device ) 6 $48 








F-25-C-EO ― 1330 1655 1404 1597 1655 1685 1655 1685 1773 

Lever - Dane 

F-25-C-L 510L 1628 2004 1702 1946 2011 2041 1953 1983 2129 

F-25-C-L-BE 

F-25-C-L-NL 

F-25-C-L-DT 

F-25-C-L 

F-25-C-TP 

F-25-C-TP-BE 

F-25-C-NL 

F-25-C-K 

F-25-C-K-BE 

F-25-C-K-NL 

F-25-C-K-DT 

F-25-C-DT 

F-25-C-DT 

F-25-C-C 

Device Series F-25-C 



510L-BE 1628 2004 1702 1946 2011 2041 1953 1983 2129 

510L-NL 1569 1935 1643 1877 1940 1970 1894 1924 2058 

510L-DT 1569 1935 1643 1877 1940 1970 1894 1924 2058 

VR Lever 

511L 1679 2055 1753 1997 2063 2093 2004 2034 2181 

Thumbpiece 

512TP 1597 1948 1671 1890 1999 2029 1922 1952 2117 

512TP-BE 1597 1948 1671 1890 1999 2029 1922 1952 2117 

512-NL 1544 1890 1618 1832 1931 1961 1869 1899 2049 

Knob 

513K 1554 1918 1628 1860 1961 1991 1879 1909 2079 

513K-BE 1554 1918 1628 1860 1961 1991 1879 1909 2079 

513K-NL 1554 1918 1628 1860 1961 1991 1879 1909 2079 

513K-DT 1554 1918 1628 1860 1961 1991 1879 1909 2079 

DT Pull 

717DT 1481 1839 1588 1814 1872 1902 1806 1836 1990 

512DT 1510 1837 1584 1779 1931 1961 1835 1865 2049 

Delta Trim 

718C 1448 1806 1555 1762 1820 1850 1773 1803 1938 





Handing: F-25-C Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 


Sex Bolts: 

Optional Sex Bolts are required for center case mounting when device is used with non-reinforced hollow metal doors. See chart below for quantities and list prices. 


EO (exit only device ) 6 $48 





28

25-CWDC Device Series 




Wood Door Concealed Vertical Rod 


25-CWDC-EO ― 1338 1673 1423 1640 1707 1740 1707 1740 1841 

Lever - Dane 

25-CWDC-L 510L 1636 2022 1721 1989 2063 2096 2005 2038 2197 

25-CWDC-L-BE 

25-CWDC-L-NL 

25-CWDC-L-DT 

25-CWDC-L 

25-CWDC-TP 

25-CWDC-TP-BE 

25-CWDC-NL 

25-CWDC-K 

25-CWDC-K-BE 

25-CWDC-K-NL 

25-CWDC-K-DT 

510L-BE 1636 2022 1721 1989 2063 2096 2005 2038 2197 

510L-NL 1577 1953 1662 1920 1992 2025 1946 1979 2126 

510L-DT 1577 1953 1662 1920 1992 2025 1946 1979 2126 

VR Lever 

511L 1687 2073 1772 2040 2115 2148 2056 2089 2249 

Thumbpiece 

512TP 1605 1966 1690 1933 2051 2084 1974 2007 2185 

512TP-BE 1605 1966 1690 1933 2051 2084 1974 2007 2185 

512-NL 1552 1908 1637 1875 1983 2016 1921 1954 2117 

Knob 

513K 1562 1936 1647 1903 2013 2046 1931 1964 2147 

513K-BE 1562 1936 1647 1903 2013 2046 1931 1964 2147 

513K-NL 1562 1936 1647 1903 2013 2046 1931 1964 2147 

513K-DT 1562 1936 1647 1903 2013 2046 1931 1964 2147 

DT Pull 

25-CWDC-DT 

717DT 1489 1857 1607 1857 1924 1957 1858 1891 2058 

25-CWDC-DT 

512DT 1518 1855 1603 1822 1983 2016 1887 1920 2117 





Handing: 25-CWDC Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 

The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional . charge. 

Sex Bolts: 

Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood or composite doors. See chart below for quantities and list prices. 

Latches 

Device 

Application 

Sex Bolt 325 S ex Bolt 42 List Add 






Device Series F-25-CWDC 




Wood Door Concealed Vertical Rod 


F-25-CWDC-EO ― 1488 1823 1573 1790 1857 1890 1857 1890 1991 

Lever - Dane 

F-25-CWDC-L 510L 1786 2172 1871 2139 2213 2246 2155 2188 2347 

F-25-CWDC-L-BE 

F-25-CWDC-L-NL 

F-25-CWDC-L-DT 

F-25-CWDC-L 

F-25-CWDC-TP 

F-25-CWDC-TP-BE 

F-25-CWDC-NL 

F-25-CWDC-K 

F-25-CWDC-K-BE 

F-25-CWDC-K-NL 

F-25-CWDC-K-DT 

510L-BE 1786 2172 1871 2139 2213 2246 2155 2188 2347 

510L-NL 1727 2103 1812 2070 2142 2175 2096 2129 2276 

510L-DT 1727 2103 1812 2070 2142 2175 2096 2129 2276 

VR Lever 

511L 1837 2223 1922 2190 2265 2298 2206 2239 2399 

Thumbpiece 

512TP 1755 2116 1840 2083 2201 2234 2124 2157 2335 

512TP-BE 1755 2116 1840 2083 2201 2234 2124 2157 2335 

512-NL 1702 2058 1787 2025 2133 2166 2071 2104 2267 

Knob 

513K 1712 2086 1797 2053 2163 2196 2081 2114 2297 

513K-BE 1712 2086 1797 2053 2163 2196 2081 2114 2297 

513K-NL 1712 2086 1797 2053 2163 2196 2081 2114 2297 

513K-DT 1712 2086 1797 2053 2163 2196 2081 2114 2297 

DT Pull 

F-25-CWDC-DT 

717DT 1639 2007 1757 2007 2074 2107 2008 2041 2208 

F-25-CWDC-DT 

512DT 1668 2005 1753 1972 2133 2166 2037 2070 2267 





Handing: F-25-CWDC Devices, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. 


Sex Bolts: 




Application 

EO (Exit only device) - SCDC 

Device x Trim - SCDC 

Latches 

Device 

Sex Bolt 325 Sex Bolt 425 List Add 

- 6 $48 

- 2 16 




30




Prefix 

List Add 

CD Cylinder Dogging available on all 25 series Panic Devices 57 

LD Less Dogging available on all 25 series Panic Devices 25 


Suffix 

List Add 

LBR Available with UL Fire Label at no additional charge on F-25-V and F-25-C devices. NC 


For Fire Rated Devices specify on device LBR and second device LBR-AFL. 


WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturer 

for UL Fire Ratings greater than 20 minutes. 

Hurricane Device 

Meets all FBC Hurricane Listings. Consult factory for specific Applications. 

Prefix 

List Add 

HH Hurricane option available on 25-R, F-25-R, 25-V, F-25-V. Prefix device “HH”. 26 

Note: HH25-V and HH-F-25-V, will be supplied with twelve sexbolts. Add $96.00 list. 

Standard Devices 25-C, F-25-C, 25-M, F-25-M meet all FBC Hurricane 

NC 

listing requirements. Consult factory for specific applications. 

Prefix “HH” is not required on these devices. 

Electric Dogging / Electric Latch Retraction 

Prefix 

List Add 

ED Electric Dogging - Available on all 25 series Panic and Fire Devices 372 

Electrical Dogging cannot be used in combination with CD, EA, HWEA, EL or KOR options. 

EL Electric Latch Retraction - Available on all 25 series Panic and Fire Devices 506 

Electrical Latch cannot be used in combination with CD, ED, EA, HWEA or KOR options. 


Prefix 

List Add 

RX Touch Bar Request to Exit Switch available on all 25 series Devices. 203 

RX dogging monitoring switch can be used in combination with a second 

RX, DM or LM switch. Add $203 list. 

DM Touch Bar and Latch Bolt Monitoring Switch available on most 25 series Devices. 203 

DM device monitoring switch can be used in combination with a RX switch. Add $203 list. 

LM Latch Bolt Monitoring Switch available on most 25 series Devices. 203 

Not available on F-25-R devices, with dual LM switches or in combination with DM switch. 

LM device monitoring switch can be used in combination with a RX switch. Add $203 list. 






Exit Alarm 

(continued) Device Options 25 

Prefix 

List Add 

EA Exit Alarm 372 

For Surface Vertical Devices, specify device with DM (Device Monitor Switch). Add $203 list. 


HWEA Hard-Wired Exit Alarm available on 25-R and 25-V Panic and Fire Devices. 761 

For Surface Vertical Devices, specify device with DM (Device Monitor Switch) Add $203 list. 


PS902 Power Supply required and must be used for warranty to apply. See page 33 for pricing. 

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery. 389 

Order part number 650305. 

Electric Lock or Unlock of Trims 

Prefix 

List Add 

FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 288 

FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 288 

Available on all 25 series devices. 

Available with TP, K, or L functions only. 

Can be used in combination with EL, ED, EA, HWEA or any Device Monitoring Switch. 



32

25 Electrical Accessories 

Delayed Exit System 

Designed to meet NFPA 101 “Special Locking Arrangement” applications 

A complete delayed egress system requires several components not included with controller. Consult catalog for details. 


DE5101 Logic Controller *15 Second Delay furnished standard 784 

*Over 15 second delay requires a letter of approval from authority having local jurisdiction. Fax Letter in with Sales Order. 

Order cannot be processed without the letter. 

Electric Power Transfers 

Model No. Description SP28 SP313 Wt.lbs./oz. 

EPT 2 Two 18 gauge wires 441 441 2.5 

EPT 10 Ten 24 gauge wires 467 467 2.5 

Power Supplies 

Standard Features 

• UL294 Listed for Access Control 

• Class 2 rated power limited output 

• Universal 110-220 VAC Input 

• Regulated and filtered DC outputs 

• AC input and DC output LED indicators 

1. Select Power Supply 

• Polarized Connector for optional distribution boards 

• AC input status indication on outside cover 

• AC status monitor 

• 12˝ H x 14˝ W x 4˝ D enclosure 


PS902 Base Power Supply (2A @ 12/24 VDC field selectable) Approximate weight 9 lbs. 210 

PS902 is able to accept a total of 1 optional distribution board and 1 900-FA board. 

PS914 Base Power Supply (4A (High inrush) @ 12/24 VDC field acceptable.) Approximate weight 9 lbs. 593 

PS914 is able to accept a total of 2 optional distribution boards. 

BAA "Buy America Act" compliant power supply option 32 

will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials" 

When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices, the 2RS is furnished 

when board option not specified. 

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay) 


900-4R 4 Independently controlled relays 44489912-00 140 

900-4R-FA 4 Independently controlled relays with FA 190 

900-2RS 2 Relay board output (PS914 only) for controlling EL Exit Device 44489896-00 145 

900-2RS-FA 2 Relay board output with FA (PS914 only) for controlling EL Exit Device 195 

900-4RL 4 Relay board integrated logic for controlling security interlocks, 44489920-00 384 

auto operators and time delays. Campatible with EL Exit Devices. 

900-4RL-FA 4 Relay board integrated logic for controlling security interlocks, 44489920-00 434 

auto operators and time delays with FA. Campatible with EL Exit Devices. 

900-8F 8 fuse protected outputs 44489946-00 50 

900-8F-FA 8 fuse protected outputs with FA 100 

900-8P 8 PTC protected outputs 44489938-00 50 

900-8P-FA 8 PTC protected outputs with FA 100 

900-BBK Battery Backup Kit (includes two 7A/hr batteries) 44489961-00 200 

900-BB Battery Backup Board Only 44489953-00 100 

900-BAT Batteries Only (qty 2) 44487155-00 100 

3. Select Other Power Supply Options 


900-FA Fire Alarm Relay (EIR) module is a plug-in relay to provide an 44487247-00 50 

interface with fire or emergency override systems. 

PS902: May be installed directly on power supply or may be used with optional distribution boards. 

PS914: Must be used with optional distribution boards. 

900-KL Key Lock Cover 32 



Notes 



34

XX-R Series Devices 

Devices are furnished standard for door widths up to 4' 

and priced complete with standard trim and strikes. 


Exit Hardware 

US3 

Rim Devices US4 SP313 US26 

(Price includes F570 Strike) Trim US10 US32D US26D US32 

◆ XX-R-EO – 798 961 1048 1086 

Athena 

XX-R-DT 815DT 902 1152 1239 1277 

XX-R-NL 815NL 911 1167 1254 1292 

XX-R-C 815C 833 1013 1100 1138 

XX-R-TP 815TP 933 1190 1277 1315 

XX-R-TP-BE 815TP-BE 933 1190 1277 1315 

● 

● 

● 

● 

XX-R-TP-NL ★ 815TP 933 1190 1277 1315 

Knob 

XX-R-K 811K 975 1170 1290 1328 

XX-R-K-BE 811K-BE 975 1170 1290 1328 

XX-R-K-NL ★ 811K 975 1170 1290 1328 

XX-R-K-DT 811K-DT 975 1170 1290 1328 

Dane Lever 

XX-R-L ▲● 812L 1082 1294 1387 1425 

XX-R-L-BE ▲● 812L-BE 1082 1294 1387 1425 

XX-R-L-NL ★▲● 812L 1082 1294 1387 1425 

XX-R-L-DT ▲● 812L-DT 1082 1294 1387 1425 




● Handing: The XX-R Device and Lever Trims are handed and field reversible. 

Device and Trim are furnished RHR when handing is not specified. 

▲ The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. 

◆ The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functions 

specify device with function “less trim”. Example: XX-R-L less trim. 

★ NL function is in device, trim does not change. 

Sex Bolts: 

Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core wood, 




Device x Athena Trim 8 52 

Device x all other Trims 4 26 



Device Series F-XX-R 





US3 

Rim Devices US4 SP313 US26 

(Price includes F570 Strike) Control Trim US10 US32D US26D US32 

◆ F-XX-R-EO – 1085 1208 1288 1322 

Athena 

F-XX-R-DT 815DT 1189 1399 1479 1513 

F-XX-R-NL 815NL 1198 1414 1494 1528 

F-XX-R-C 815C 1120 1260 1340 1374 

F-XX-R-TP 815TP 1220 1437 1517 1517 

F-XX-R-TP-BE 815TP-BE 1220 1437 1517 1551 

F-XX-R-TP-NL ★ 815TP 1220 1437 1517 1551 

● 

● 

● 

● 

Knob 

F-XX-R-K 811K 1262 1417 1530 1564 

F-XX-R-K-BE 811K-BE 1262 1417 1530 1564 

F-XX-R-K-NL ★ 811K 1262 1417 1530 1564 

F-XX-R-K-DT 811K-DT 1262 1417 1530 1564 

Dane Lever 

F-XX-R-L ▲● 812L 1369 1541 1627 1661 

F-XX-R-L-BE ▲● 812L-BE 1369 1541 1627 1661 

F-XX-R-L-NL ★▲● 812L 1369 1541 1627 1627 

F-XX-R-L-DT ▲● 812L-DT 1369 1541 1627 1661 




● Handing: The F-XX-R Device and Lever Trims are handed and field reversible. 



◆ The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functions 

specify device with function “less trim”. Example: F-XX-R-L less trim. 


Sex Bolts: 

Sex Bolts are required and added to the order for center case and end case mounting when device is used with wood, 








36

■ 

XX-V Device Series 




EXIT HARDWARE 

US3 

Surface Vertical Rod Devices US4 SP313 US26 

(Price includes 3788 and 2130 Strikes ) Trim US10 US32D US26D US32 

● XX-V-EO – 1129 1345 1345 1571 

Athena 

● XX-V-DT 815DT 1233 1536 1536 1762 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

XX-V-NL 815NL 1242 1551 1551 1777 

XX-V-C 815C 1164 1397 1397 1623 

XX-V-TP 815TP 1264 1574 1574 1800 

XX-V-TP-BE 815TP-BE 1264 1574 1574 1800 

XX-V-TP-NL ★ 815TP 1264 1574 1574 1800 

Knob 

XX-V-K 811K 1306 1554 1587 1813 

XX-V-K-BE 811K-BE 1306 1554 1587 1813 

XX-V-K-NL ★ 811K 1306 1554 1587 1813 

XX-V-K-DT 811K-DT 1306 1554 1587 1813 

Dane Lever 

XX-V-L ▲● 812L 1413 1678 1684 1910 

XX-V-L-BE ▲● 812L-BE 1413 1678 1684 1910 

XX-V-L-NL ★ ▲● 812L 1413 1678 1684 1910 

XX-V-L-DT ▲● 812L-DT 1413 1678 1684 1910 

Delta Thumb Lever 

XX-V-TL ◆ ● 719TL 1380 1596 1612 1838 

XX-V-TL-BE ◆ ● 719TL-BE 1380 1596 1612 1838 

XX-V-TL-NL ◆ ● 719TL-NL 1380 1596 1612 1838 




For Door Heights over 7' up to 8' extension rods are furnished at no additional charge. 

For Door Heights over 8' up to 10', see page 56 for extension add. 

● Handing: The XX-V Device, Lever Trims and 719 Trim are handed and field reversible. 



■ The EO Device is compatible with all device functions except all L and K. When ordering device only for L and K functions specify device 

with function “less trim”. Example: XX-V-L less trim. 



Sex Bolts: 

Optional Sex Bolts are recommended for center case, end case and latch mounting when device is used with hollow core 

wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices. 

Application 

Latches 

Sex Bolt 2729 

Center/End Case 

Sex Bolt 2729 List Add 


Device x Athena Trim 6 8 91 

Device x all other Trims 6 4 65 



■ 

Device Series F-XX-V 





US3 

Surface Vertical Rod Devices US4 SP313 US26 

(Price includes 3788 and 2130 Strikes) Control Trim US10 US32D US26D US32 

● F-XX-V-EO – 1572 1773 1915 1973 

Athena 

● F-XX-V-DT 815DT 1676 1964 2106 2164 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

F-XX-V-NL 815NL 1685 1979 2121 2179 

F-XX-V-C 815C 1607 1825 1967 2025 

F-XX-V-TP 815TP 1707 2002 2144 2202 

F-XX-V-TP-BE 815TP-BE 1707 2002 2144 2202 

F-XX-V-TP-NL ★ 815TP 1707 2002 2144 2202 

Knob 

F-XX-V-K 811K 1749 1982 2157 2215 

F-XX-V-K-BE 811K-BE 1749 1982 2157 2215 

F-XX-V-K-NL ★ 811K 1749 1982 2157 2215 

F-XX-V-K-DT 811K-DT 1749 1982 2157 2215 

Dane Lever 

F-XX-V-L ▲● 812L 1856 2106 2254 2312 

F-XX-V-L-BE ▲● 812L-BE 1856 2106 2254 2312 

F-XX-V-L-NL ★ ▲● 812L 1856 2106 2254 2312 

F-XX-V-L-DT ▲● 812L-DT 1856 2106 2254 2312 

Delta Thumb Lever 

F-XX-V-TL ◆ ● 719TL 1823 2024 2182 2240 

F-XX-V-TL-BE ◆ ● 719TL-BE 1823 2024 2182 2240 

F-XX-V-TL-NL ◆ ● 719TL-NL 1823 2024 2182 2240 






● Handing: The F-XX-V Device, Lever Trims and 719 Trim are handed and field reversible. 

Device and Trims are furnished RHR when handing is not specified. 


■ The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functions 

specify device with function “less trim”. Example: F-XX-V-L less trim. 



Sex Bolts: 

Sex Bolts are required and added to the order for center case, end case and latch mounting when device is used with wood, 


Latches 

Center/End Case 



Device x Athena Trim 6 8 91 

Device x all other Trims 6 4 65 



38

XX-M Device Series 




EXIT HARDWARE 

US3 

Mortise Lock Devices US4 SP313 US26 

(Price includes 1279 Strike) Trim US10 US32D US26D US32 

◆ ● XX-M-EO – 1090 1224 1301 1337 

Athena 

● XX-M-DT 815DT 1194 1415 1492 1528 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

XX-M-NL 815NL 1203 1430 1507 1543 

XX-M-C 815C 1125 1276 1353 1389 

XX-M-TP 815TP 1225 1453 1530 1566 

XX-M-TP-BE 815TP-BE 1225 1453 1530 1566 

XX-M-TP-NL ★ 815TP 1225 1453 1530 1566 

Knob 

XX-M-K 811K 1267 1433 1543 1579 

XX-M-K-BE 811K-BE 1267 1433 1543 1579 

XX-M-K-NL ★ 811K 1267 1433 1543 1579 

XX-M-K-DT 811K-DT 1267 1433 1543 1579 

Dane Lever 

XX-M-L ▲ 812L 1374 1557 1640 1676 

XX-M-L-BE ▲ 812L-BE 1374 1557 1640 1676 

XX-M-L-NL ★▲ 812L 1374 1557 1640 1676 

XX-M-L-DT ▲ 812L-DT 1374 1557 1640 1676 


For Standard and Optional Trims/Controls, refer to pages 52-53. 


● Handing: The XX-M Device is handed but not field reversible. Specify handing RHR or LHR. 


◆ The Mortise Lock determines function of the device. When ordering device only, specify device with function “Less Trim”. 

Example: XX-M-L less trim. 

★ NL function is in mortise lock, trim does not change. 

Sex Bolts: 









Device Series F-XX-M 





US3 

Mortise Lock Devices US4 SP313 US26 

(Price includes 1279 Strike) Control Trim US10 US32D US26D US32 

◆ ● F-XX-M-EO – 1200 1291 1450 1487 

Athena 

● F-XX-M-DT 815DT 1304 1482 1641 1678 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

F-XX-M-NL 815NL 1313 1497 1656 1693 

F-XX-M-C 815C 1235 1343 1502 1539 

F-XX-M-TP 815TP 1335 1520 1679 1716 

F-XX-M-TP-BE 815TP-BE 1335 1520 1679 1716 

F-XX-M-TP-NL 

★ 

815TP 1335 1520 1679 1716 

Knob 

F-XX-M-K 811K 1377 1500 1692 1729 

F-XX-M-K-BE 811K-BE 1377 1500 1692 1729 

F-XX-M-K-NL 

★ 

811K 1377 1500 1692 1729 

F-XX-M-K-DT 811K-DT 1377 1500 1692 1729 

Dane Lever 

F-XX-M-L ▲ 812L 1484 1624 1789 1826 

F-XX-M-L-BE ▲ 812L-BE 1484 1624 1789 1826 

F-XX-M-L-NL ★ ▲ 812L 1484 1624 1789 1826 

F-XX-M-L-DT ▲ 812L-DT 1484 1624 1789 1826 




Handing: The F-XX-M Device is handed but not field reversible. Specify handing RHR or LHR. 


◆ The Mortise Lock determines function of the device. When ordering device only, specify device with function “Less Trim”. 

Example: F-XX-M-L less trim. 

★ NL function is in mortise lock, trim does not change. 

● 

Sex Bolts: 









40

■ 

XX-C Device Series 




EXIT HARDWARE 

US3 

Concealed Vertical Rod Devices US4 SP313 US26 

(Price includes 4188 and 2130 Strikes) Trim/Control US10 US32D US26D US32 

● XX-C-EO – 1298 1456 1636 1673 

Delta 

● XX-C-DT 717DT 1449 1640 1853 1890 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

XX-C-DT 718DT 1589 1621 1869 1906 

XX-C-NL 718NL 1449 1640 1853 1890 

XX-C-C 718C 1416 1607 1801 1838 

XX-C-TP ◆ 718TP 1549 1790 1970 2007 

XX-C-TP-BE ◆ 718TP-BE 1549 1790 1970 2007 

XX-C-TP-NL ◆ 718TP-NL 1549 1790 1970 2007 

XX-C-TL ◆ 719TL 1549 1707 1903 1940 

XX-C-TL-BE ◆ 719TL-BE 1549 1707 1903 1940 

XX-C-TL-NL ◆ 719TL-NL 1549 1707 1903 1940 

XX-C-TLP ◆ 719TLP 1549 1707 1918 1955 

XX-C-TLP-BE ◆ 719TLP-BE 1549 1707 1918 1955 

XX-C-TLP-NL ◆ 719TLP-NL 1549 1707 1918 1955 

Knob 

XX-C-K 711K 1440 1661 1894 1931 

XX-C-K-BE 711K-BE 1440 1661 1894 1931 

XX-C-K-NL 711K-NL 1440 1661 1894 1931 

XX-C-K-DT ◆ 711K-DT 1440 1661 1894 1931 

Dane Lever Controls 

XX-C-L ▲ 712L 1580 1754 1955 1992 

XX-C-L-BE ▲ 712L-BE 1580 1754 1955 1992 

XX-C-L-NL ▲ 712L-NL 1580 1754 1955 1992 

XX-C-L-DT ▲ 712L-DT 1580 1754 1955 1992 






● Handing: All XX-C Device is handed but not field reversible. Specify handing RHR or LHR. 


■ The “EO” Device is compatible with all device functions. 


Sex Bolts: 








Device Series F-XX-C 





US3 

Concealed Vertical Rod Devices US4 SP313 US26 

(Price includes 4188 and 2130 Strikes ) Control Trim US10 US32D US26D US32 

F-XX-C-EO – 1409 1567 1582 1612 

Delta 

● F-XX-C-DT 717DT 1560 1751 1799 1829 

■ ● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

F-XX-C-DT 718DT 1700 1732 1815 1845 

F-XX-C-NL 718NL 1560 1751 1799 1829 

F-XX-C-C 718C 1527 1718 1747 1777 

F-XX-C-TP ◆ 718TP 1660 1901 1916 1946 

F-XX-C-TP-BE ◆ 718TP-BE 1660 1901 1916 1946 

F-XX-C-TP-NL ◆ 718TP-NL 1660 1901 1916 1946 

F-XX-C-TL ◆ 719TL 1660 1818 1849 1879 

F-XX-C-TL-BE ◆ 719TL-BE 1660 1818 1849 1879 

F-XX-C-TL-NL ◆ 719TL-NL 1660 1818 1849 1879 

F-XX-C-TLP ◆ 719TLP 1660 1818 1864 1894 

F-XX-C-TLP-BE ◆ 719TLP-BE 1660 1818 1864 1894 

F-XX-C-TLP-NL ◆ 719TLP-NL 1660 1818 1864 1894 

Knob 

F-XX-C-K 711K 1551 1772 1840 1870 

F-XX-C-K-BE 711K-BE 1551 1772 1840 1870 

F-XX-C-K-NL 711K-NL 1551 1772 1840 1870 

F-XX-C-K-DT ◆ 711K-DT 1551 1772 1840 1870 


F-XX-C-L ▲ 712L 1691 1865 1901 1931 

F-XX-C-L-BE ▲ 712L-BE 1691 1865 1901 1931 

F-XX-C-L-NL ▲ 712L-NL 1691 1865 1901 1931 

F-XX-C-L-DT ▲ 712L-DT 1691 1865 1901 1931 






● Handing: All F-XX-C Device is handed but not field reversible. Specify handing RHR or LHR. 




Sex Bolts: 








42

XX-CWDC Device Series 




EXIT HARDWARE 

US3 

Wood Door Concealed Vertical Rod Devices US4 SP313 US26 

(Price includes 4188 and 2130 Strikes ) Trim/Control US10 US32D US26D US32 

XX-C-WDC-EO – 1760 2015 2163 2199 

Delta 

● XX-C-WDC-DT 717DT 1911 2199 2380 2416 

■ ● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

XX-C-WDC-DT 718DT 2051 2180 2396 2432 

XX-C-WDC-NL 718NL 1911 2199 2380 2416 

XX-C-WDC-C 718C 1878 2166 2328 2364 

XX-C-WDC-TP ◆ 718TP 2011 2349 2497 2533 

XX-C-WDC-TP-BE ◆ 718TP-BE 2011 2349 2497 2533 

XX-C-WDC-TP-NL ◆ 718TP-NL 2011 2349 2497 2533 

XX-C-WDC-TL ◆ 719TL 2011 2266 2430 2466 

XX-C-WDC-TL-BE ◆ 719TL-BE 2011 2266 2430 2466 

XX-C-WDC-TL-NL ◆ 719TL-NL 2011 2266 2430 2466 

XX-C-WDC-TLP ◆ 719TLP 2011 2266 2445 2481 

XX-C-WDC-TLP-BE ◆ 719TLP-BE 2011 2266 2445 2481 

XX-C-WDC-TLP-NL ◆ 719TLP- NL 2011 2266 2445 2481 

Knob 

XX-C-WDC-K 711K 1902 2220 2421 2457 

XX-C-WDC-K-BE 711K-BE 1902 2220 2421 2457 

XX-C-WDC-K-NL 711K-NL 1902 2220 2421 2457 

XX-C-WDC-K-DT ◆ 711K-DT 1902 2220 2421 2457 


XX-C-WDC-L ▲ 712L 2042 2313 2482 2518 

XX-C-WDC-L-BE ▲ 712L-BE 2042 2313 2482 2518 

XX-C-WDC-L-NL ▲ 712L-NL 2042 2313 2482 2518 

XX-C-WDC-L-DT ▲ 712L-DT 2042 2313 2482 2518 






● Handing: All XX-C-WDC Device is handed but not field reversible. Specify handing RHR or LHR. 




Sex Bolts: 




EO (Exit only device) 8 $52 

Device x all other trim 4 26 



Device Series F-XX-C-WDC 


for 90 minute doors, and priced complete with standard trim and strikes. 



US3 

Wood Door Concealed Vertical Rod Devices US4 SP313 US26 

(Price includes 4188 and 2130 Strikes ) Trim/Control US10 US32D US26D US32 

F-XX-C-WDC-EO – 1910 2165 2313 2349 

Delta Trim 

● F-XX-C-WDC-DT 717DT 2061 2349 2530 2566 

■ ● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

● 

F-XX-C-WDC-DT 718DT 2201 2330 2546 2582 

F-XX-C-WDC-NL 718NL 2061 2349 2530 2566 

F-XX-C-WDC-C 718C 2028 2316 2478 2514 

F-XX-C-WDC-TP ◆ 718TP 2161 2499 2647 2683 

F-XX-C-WDC-TP-BE ◆ 718TP-BE 2161 2499 2647 2683 

F-XX-C-WDC-TP-NL ◆ 718TP-NL 2161 2499 2647 2683 

F-XX-C-WDC-TL ◆ 719TL 2161 2416 2580 2616 

F-XX-C-WDC-TL-BE ◆ 719TL-BE 2161 2416 2580 2616 

F-XX-C-WDC-TL-NL ◆ 719TL-NL 2161 2416 2580 2616 

F-XX-C-WDC-TLP ◆ 719TLP 2161 2416 2580 2616 

F-XX-C-WDC-TLP-BE ◆ 719TLP-BE 2161 2416 2580 2616 

F-XX-C-WDC-TLP-NL ◆ 719TLP- NL 2161 2416 2580 2616 

Knob Control 

F-XX-C-WDC-K 711K 2052 2370 2571 2607 

F-XX-C-WDC-K-BE 711K-BE 2052 2370 2571 2607 

F-XX-C-WDC-K-NL 711K-NL 2052 2370 2571 2607 

F-XX-C-WDC-K-DT ◆ 711K-DT 2052 2370 2571 2607 


F-XX-C-WDC-L ▲ 712L 2192 2463 2632 2668 

F-XX-C-WDC-L-BE ▲ 712L-BE 2192 2463 2632 2668 

F-XX-C-WDC-L-NL ▲ 712L-NL 2192 2463 2632 2668 

F-XX-C-WDC-L-DT ▲ 712L-DT 2192 2463 2632 2668 






● Handing: All F-XX-C-WDC Device is handed but not field reversible. Specify handing RHR or LHR. 




Sex Bolts: 





EO (Exit only device) 8 $52 

Device x all other trim 4 26 



44

XX Device Options 


Suffix 

LBR Available at no additional charge on Vertical and Concealed Vertical Rod Devices NC 


For Fire Rated Devices specify one device LBR and second device LBR-AFL. 

Second device provided with an Auxiliary Fire Bolt Latch. 

WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturer for 

UL Fire Ratings greater than 20 Minutes. 

Electric Lock or Unlock of Trims 

Prefix 

List Add 

FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 288 

Available on XX series Rim and Surface Vertical Devices. 

FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 288 

Available on XX series Rim and Surface Vertical Devices. 



Strikes 

▲ 

● 

Un- US4 SP313 

Model No. Description finished US19 US26D US32D US10 US10B US3 US26 

Rim Strikes 

264 24/25-R Panic Devices - Optional — 76 87 — — — — — 

299 24/25-R Panic Devices - Standard — 45 54 — 54 54 70 70 

299F 24/25-R Fire Devices - Standard — 58 — 75 88 88 102 102 

499F 25-R Fire Devices - Optional — 136 — 141 — — — ― 

F490 19-R/XX-R Panic and Fire Devices - Optional 40 — — — — — — — 

565 19-R/XX-R Panic Devices - Optional — — 40 — 40 40 40 — 

F570 19-R/XX-R Panic and Fire Devices - Standard — 40 — — — — — — 

571 19/XX-R inactive Leaf Strike 2 7/8˝ backset - Optional — — — 40 40 40 40 40 

571A 19/XX-R inactive Leaf Strike 2 3/8˝ backset - Optional — — — 40 40 40 40 40 

579 XX-R Panic Devices - Optional — — 40 — 40 40 40 — 

1439 24/25-R Panic Devices - Optional — 110 — — — — — — 

1606 24/25-R Panic Devices - Optional 55 — — — — — — — 

1609 25-R Panic Devices - Optional — 76 84 — 84 84 90 90 

Vertical Rod Top Strikes 

3788 19/24/25/XX-V Panic and Fire Devices - Standard 40 — — — — — — — 

4188 24/25/XX-C, CWDC Panic and Fire Devices - Standard 40 — — — — — — — 

4188NS 24-C, CWDC Panic Devices - Optional 40 — — — — — — — 

Vertical Rod Bottom Strikes 

2130 19-V/24/25/XX-V, C, CWDC Panic or Fire - Standard 40 — — — — — — — 

4155 19-V/24/25/XX-V, C, CWDC Panic or Fire - Optional — — 40 — 40 40 40 40 

Mortise Lock Strikes 

1279 25/XX-M Panic and Fire Devices - Standard 40 — — — — — — — 

F1280 25-M Fire Devices - Optional 40 — — — — — — — 

1281 25/XX-M Panic Devices - Optional — — 40 — 40 40 40 40 


Refer to device catalogs for specific door application strike requirements. 

● For Flush Transom applications, Specify 4215 Angle Bracket, add $40 List. 

● For mounting plate, Specify 4306, add $29 List. 

▲ 1609 Strike must be used with a Coordinator. Not a UL fire exit hardware listed application. 



46

Trim - How to Order 

How to Order Sequence Example 

510 L - R US26D LHR SUTRO FSE CYL 

Trim Series 

D24 Series D25 Series 19 Series XX Series 

710 510 910 810 

711 511 911 811 

712 512 912 812 

715 513 914 814 

717 717 917 815 

718 920 816 

719 930 820 

711 

712 

717 

718 

719 

Trim Function (see Trim pages for all functions) 

EO 

Exit Only 

DT 

Dummy Trim 

NL 

Night Latch 

C 

Cylinder Trim Less Pull 

TP 

Thumbpiece 

K 

Knob 

L 

Lever (Dane Standard) 

KIL 

Key in Lever 

TL 

Thumb Lever 

Device Type 

R 

V 

M 

C 

Rim 

Surface Vertical Rod 

Mortise 

Concealed Vertical Rod (includes WDC) 

Finish 

US3 US15 US32D 

US4 US26 SP28 

US10 US26D SP313 

US10B US32 

Handing 

RHR 

LHR 

Right Hand Reverse 

Left Hand Reverse 

Lever Style 

DANE 

SUTRO 

QUANTUM 

AVALON 

supplied standard if not specified 

Trim Options 

FSA 

FSE 

Electric Lock or Unlock-Fail Safe (FSA device required) 

Electric Lock or Unlock-Fail Secure (FSE device required) 

Other Information or Accessories 

CYL 

Include Cylinder with Trim 

KD 

Cylinder Keyed Different 

Door Thickness 

Specify door thickness other than 1-3/4" 



Series Trims 19 

For other possible trim applications not shown, consult factory. 


19 Series Trim 

Old Lever SP28 

Model No. Model No. Style Description SP313 US15 

Trident Trim 

■ 920DT 1953DT – Dummy Trim 44 – 

■ 920NL 1955P – Night Latch 76 – 

Centron Trim 

▲ 930EO 2301BE – Exit Only 40 40 

917DT 1904 Pull Only – Dummy Trim 35 35 

▲ 930DT 2303DT – Dummy Trim 44 44 

▲ 930NL 2305P – Night Latch 61 61 

▲ 930C 2302C – Night Latch Less Pull 54 54 

Control Trim 

* 

918DT – Dummy Trim 128 233 

918NL – Night Latch 128 233 

* 

◆ 910DT 1908DT – Dummy Trim 128 233 

◆ 910NL 1909P – Night Latch 128 233 

910TP 1906T – Thumbpiece, Key Locks or Unlocks 128 233 

910TP-BE 1926T LS/LK – Thumbpiece, Blank Escutcheon 128 233 

◆ 911TP-NL – – Thumbpiece, Night Latch 128 233 

● 911K 1907K – Knob, Key Locks or Unlocks 128 233 

● 911K-BE 1927K LS/LK – Knob, Blank Escutcheon 128 233 

911K-DT 1987K-DT – Knob, Dummy Trim 128 233 

● 911K-NL – – Knob, Night Latch 128 233 

912L 1910L Dane Lever, Key Locks or Unlocks 177 272 

● 912L-BE 1920L LS/LK Dane Lever, Blank Escutcheon 177 272 

● 912L-NL 1910L-NL Dane Lever, Night Latch 177 272 

● 912L-DT 1980L-DT Dane Lever, Dummy Trim 177 272 

◆ ● 

◆ ● 

◆ ● 

Key In Lever Trims 

914KIL-KD 2400KIL – Key in Lever, Keyed Different 213 213 

914KIL-BE 2401KIL LS/LK – Key in Lever, Blank Escutcheon 213 213 

914KIL-NL-KD 2402KIL NL – Key in Lever, Night Latch, Keyed Different 213 213 

914KIL-IC 2400KIL W/IC CORE – Key in Lever with IC Core 262 262 


▲● 

▲● 

▲● 

▲● 

The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge. 


■ Handing: 920 series Trims are handed and not field reversible. Specify handing RHR or LHR. 

▲ Available in SP313 and US32D finishes only. 

Available 2/28/2011. 

*◆ Available until 2/25/2011. Trim to be discontinued effective 2/28/2011. 



48

24 Series Trims 




Old Device US4 

Model No. Model No. Type Description SP28 SP313 US10 US15 

US3 

US26 

US26D 

Athena Trim 

715DT 1303DT R, V Dummy Trim 104 191 104 ― 191 

Control Trim 

710DT 1797DT R, V Dummy Control 

710NL 1799P R, V Night Latch 

710TP 1796T R, V Thumbpiece, Key Locks or Unlocks 

710TP-BE 1793T LS/LK R, V Thumbpiece, Blank Escutcheon 

711K 1604K R, V Knob, Key Locks or Unlocks 

711K 1764K C Knob, Key Locks or Unlocks 

711K-BE 1614K LS/LK R, V Knob, Blank Escutcheon 

711K-BE 1774K LS/LK C Knob, Blank Escutcheon 

711K-NL 1624K-NL R, V Knob, Dummy Control 

711K-NL 1784K-NL C Knob, Dummy Control 

711K-DT 1624K-DT R, V Knob, Dummy Control 

711K-DT 1784K-DT C Knob, Dummy Control 

Delta Controls 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

142 205 142 205 258 

717DT 1600-DT R, V Dummy Trim 151 184 151 184 217 

717DT 1760-DT C Dummy Trim 

151 184 151 184 217 

718DT 1622T-DT R, V Dummy Trim 

291 165 291 165 233 

718DT 1743T-DT C Dummy Trim 

291 165 165 165 233 

718NL 1601P R, V Night Latch 

151 184 151 184 217 

718NL 1740P C Night Latch 

151 184 151 184 217 

718C 1603C R, V Night Latch Less Pull 

118 151 118 151 165 

718C 1713C C Night Latch Less Pull 

118 151 118 151 165 

718TP 1602T R, V Thumbpiece, Key Locks or Unlocks 

251 334 251 334 334 

718TP 1741T C Thumbpiece, Key Locks or Unlocks 

251 334 251 334 334 

718TP-BE 1612T LS/LK R, V Thumbpiece, Blank Escutcheon 

251 334 251 334 334 

718TP-BE 1742T LS/LK C Thumbpiece, Blank Escutcheon 

251 334 251 334 334 

719TL 1618SL V Thumbturn, Key Locks or Unlocks 

251 251 251 251 267 

719TL 1738SL C Thumbturn, Key Locks or Unlocks 

251 251 251 251 267 

719TL-BE LS/LK V Thumbturn, Blank Escutcheon 

251 251 251 251 267 

719TL-BE C Thumbturn, Blank Escutcheon 

251 251 251 251 267 

719TL-NL 1619SL-NL V Thumbturn, Night Latch 

251 251 251 251 267 

719TL-NL 1739SL-NL C Thumbturn, Night Latch 

251 251 251 251 267 

719TLP 1728SLP C Thumbturn with Pull 

251 251 251 251 282 

719TLP-BE C Thumbturn with Pull, Blank Escutcheon 251 251 251 251 282 

719TLP-NL 1729SLP-NL C Thumbturn with Pull, Night Latch 

251 251 251 251 282 



715DT not available in US32 or US32D finish. 


Electric Lock or Unlock option is available on Trims for use on Rim or Surface Vertical Devices. 

Available with TP, K or L functions only. 

Suffix FSA for Fail Safe operation, or FSE for Fail Secure operation. Add $288 list. 



(continued) Series Trims 24 




Old Device Lever US4 

Model No. Model No. Type Style Description SP28 SP313 US10 US15 

US3 

US26 

US26D 

Control Lever Trim 

712L 1606L R, V Dane Lever, Key Locks or Unlocks 282 298 282 298 319 

712L 1766L C Dane Lever, Key Locks or Unlocks 282 298 282 298 319 

712L-BE 1616L LS/LK R, V Dane Lever, Blank Escutcheon 282 298 282 298 319 

712L-BE 1776L LS/LK C Dane Lever, Blank Escutcheon 282 298 282 298 319 

712L-NL 1606L-NL R, V Dane Lever, Night Latch 

282 298 282 298 319 

712L-NL 1766L-NL C Dane Lever, Night Latch 

282 298 282 298 319 

712L-DT 1626L-DT R, V Dane Lever, Dummy Trim 

282 298 282 298 319 

712L-DT 1786L-DT C Dane Lever, Dummy Trim 

282 298 282 298 319 


The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge. 


Electric Lock or Unlock option is available on Trims for use on Rim or Surface Vertical Devices. 

Available with TP, K or L functions only. 

Suffix FSA for Fail Safe operation, or FSE for Fail Secure operation. Add $288 list. 



50

25 Series Trims 




US3 

Lever Device SP28 US4 US26 

Model No. Style Type Description SP313 * US10 US32D US26D US32 

Lever Trim 

• 

510L Dane R, V, M, C Lever, Key Locks or Unlocks 298 298 349 349 356 

510L-NL Dane R, V, M, C Lever, Night Latch 

239 239 280 280 285 

510L-DT Dane R, V, M, C Lever, Dummy Trim 

239 239 280 280 285 

510L-BE Dane R, V, M, C Lever, Blank Escutcheon 

298 298 349 349 356 

Optional Lever designs Avalon, Quantum and Sutro are available at no additional charge. 

Vandal Resistant Trim 

• 

511L Dane R, V, M, C Lever, Key Locks and Unlocks 

Optional Lever designs Avalon, Quantum and Sutro are available at no additional charge. 

349 349 400 400 408 

Night Latch and Thumbpiece Trim 

512NL R, V, M, C Night Latch 

512TP R, V, M, C Thumbpiece, Key Locks and Unlocks 

512TP-BE R, V, M, C Thumbpiece, Blank Escutcheon 

214 214 235 235 276 

267 267 293 293 344 

267 267 293 293 344 

Knob Trim 

513K R, V, M, C Knob, Key Locks or Unlocks 

513K-NL R, V, M, C Knob, Night Latch 

513K-DT R, V, M, C Knob, Dummy Trim 

513K-BE R, V, M, C Knob, Blank Escutcheon 

224 224 263 263 306 

224 224 263 263 306 

224 224 263 263 306 

224 224 263 263 306 

Dummy Trim 

512DT R, V, M, C Dummy Trim 

180 180 182 182 276 

US3 

US26 

DeltaTrim SP28 SP313 US10 US32D US26D US32 

717DT R, V, M, C Dummy Trim 

151 184 151 184 217 217 

718C 

C 

Night Latch Less Pull 

118 151 118 151 165 165 

• 


• Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. 

* Trim furnished in SP313 finish when ordered with 313AN devices 

US4 



◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

Series Trims XX 



XX Series Trim 

US3 

US26 

Old Device US4 SP313 US26D 

Model No. Model No. Type Description US10 US32D US32 

Athena Trim 

815DT 1300DT R, V, M Dummy Trim 104 191 191 

815NL 1301P R, V, M Night Latch 113 206 206 

815C 3577C R, V, M Night Latch Less Pull 35 52 52 

815TP 1302T R, V, M Thumbpiece, Key Locks or Unlocks 135 229 229 

815TP-BE R, V, M Thumbpiece, Blank Escutcheon 135 229 229 

Delta Trim 

● 718DT 1760DT C Dummy Trim 291 165 233 

● 717DT 1743T-DT C Dummy Trim 151 184 217 

● 718NL 1740P C Night Latch 151 184 217 

● 718C 1713C C Night Latch Less Pull 118 151 165 

● 718TP 1741T C Thumbpiece, Key Locks or Unlocks 251 334 334 

● 718TP-BE 1742T LS/LK C Thumbpiece, Blank Escutcheon 251 334 334 

● 719TL 1618SL V Thumbturn, Key Locks or Unlocks 251 251 267 

● 719TL 1738SL C Thumbturn, Key Locks or Unlocks 251 251 267 

● 719TL-BE 1658SL LS/LK V Thumbturn, Blank Escutcheon 251 251 267 

● 719TL-BE C Thumbturn, Blank Escutcheon 251 251 267 

● 719TL-NL 1619SL-NL V Thumbturn, Night Latch 251 251 267 

● 719TL-NL 1739SL-NL C Thumbturn, Night Latch 251 251 267 

● 719TLP 1728SLP C Thumbturn with Pull 251 251 282 

● 719TLP-BE C Thumbturn with Pull, Blank Escutcheon 251 251 282 

● 719TLP-NL 1729SLP-NL C Thumbturn with Pull, Night Latch 251 251 282 

Vanguard Trim 

820EO 1348 R, V, M Exit Only 106 131 131 


820NL 1345P R, M, XXV Night Latch 165 165 200 

▲ 820TP 1346T R Thumbpiece, Key Locks or Unlocks 194 242 251 

▲ 820TP 1346T V, M Thumbpiece, Key Locks or Unlocks 194 242 251 

▲ 820TP-BE 1346T LS/LK R, M Thumbpiece, Blank Escutcheon 194 242 251 

Apollo Trim 

810EO 1448 R, V, M Exit Only 104 104 131 


810NL 1445P R, M, XXV Night Latch 130 159 200 

▲ 810TP 1446T R Thumbpiece, Key Locks or Unlocks 150 184 200 

▲ 810TP 1446T V, M Thumbpiece, Key Locks or Unlocks 150 184 200 

▲ 810TP-BE 1446T LS/LK R, V, M Thumbpiece, Blank Escutcheon 150 184 200 


● Handing: 700 Series Delta Trims are handed but field reversible. Trims are furnished RHR when handing is not specified. 

▲ Electric Lock or Unlock option is available on XX series Rim and Surface Vertical Rod Devices. FSA or FSE option on device required. 

For replacement trim specify trim with suffix FSA for fail safe option or FSE for fail secure operation. For FSA or FSE function with device 

and trim see page 45. 



52

XX Series Trims (continued) 



XX Series Trim 

US3 

US26 

Old Device Lever US4 US10B US26D 

Model No. Model No. Type Style Description US10 US32D US32 

Knob Trim 

▲ 

● 

● 

◆ ● 

811K 1811K R, V, M Knob, Key Locks or Unlocks 177 209 242 

711K 1764K C Knob, Key Locks or Unlocks 142 205 258 

811K-BE 1812K LS/LK R, V, M Knob, Blank Escutcheon 177 209 242 

711K-BE 1774K LS/LK C Knob, Blank Escutcheon 142 205 258 

811K-DT 1810K-DT R, V, M Knob, Dummy Trim 177 209 242 

711K-DT 1784K-DT C Knob, Dummy Trim 142 205 258 

Lever Trim 

▲● 

● 

▲● 

● 

● 

◆ ● 

812L 1821L R, V, M Dane Lever, Key Locks or Unlocks 284 333 339 

712L 1766L C Dane Lever, Key Locks or Unlocks 282 298 319 

812L-BE 1822L LS/LK R, V, M Dane Lever, Blank Escutcheon 284 333 339 

712L-BE 1776L-LS/LK C Dane Lever, Blank Escutcheon 282 298 319 

812L-DT 1820L-DT R, V, M Dane Lever, Dummy Trim 284 333 339 

712L-DT 1786L-DT C Dane Lever, Dummy Trim 282 298 319 

Breakaway Lever Trim 

▲● 

▲● 

● 

● 

816L 1821ST R, V, M Dane Lever, Key Locks or Unlocks 333 382 388 

816L-BE 1822ST LS/LK R, V, M Dane Lever, Blank Escutcheon 333 382 388 

816L-NL 1821ST-NL R, V, M Dane Lever, Night Latch 333 382 388 

816L-DT 1820ST-DT R, V, M Dane Lever, Dummy Trim 333 382 388 


The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum, and Avalon are available at no additional charge. 

Handing: 711 and 814 Trims are handed but field reversible. Trims are furnished RHR when handing is not specified. 

Electric Lock or Unlock option is available on XX series Rim and Surface Vertical Rod Devices. FSA or FSE option on 

device required. For replacement trim specify trim with suffix FSA for fail safe option or FSE for fail secure operation. 

For FSA or FSE function with device and trim see page 45 for pricing. 


● 

▲ 



Cover Plates & Filler Plates 

Model No. Description Unfinished SP313 US32D 

4167 For 19 Series TP and DT Controls when used on 86 or 161 door preps — 32 47 

4168 For 19 Series EO when used on 86 door preps — 32 47 

4170 For 19 Series K and L Controls when used on 86 or 161 door preps — 32 47 

4174 For 19 Series device (push side) when used on 86 door preps — 32 47 

3722 Strike Cover - ASA 4 - 7/8" 11 — — 

3723 Mortise front - 8" x 1-1/4" 11 — — 

3721 Lock front - 2-1/4" x 1-1/8" 11 — — 

Cylinders 

US4 

US10 

Model No. Description SP313 US26D US3 

4032 Rim Cylinder, Keyed Different 30 30 30 

4033 Threaded Mortise Cylinder, Keyed Different 30 30 30 

4034 Threaded 1-1/2" Mortise Cylinder 30 30 30 

US4 

US3 

US10 

US32 

Model No. Description US10B US26D US32D 

985 1-1/8" Mortise Cylinder 53 53 55 

986 1-1/4" Mortise Cylinder 53 53 55 

951 Rim Cylinder 53 53 55 

C987 1-3/8" Interchangeable Core Mortise Cylinder 33 33 35 

C953 Interchangeable Core Rim Cylinder 34 34 36 


Custom Keying not available. Falcon G - default keyway. 

Cylinder Dogging Kits 

US4 

SP28 US28 US10 US3 

Model No. Description SP313 US32D 313AN US26D US26 

19CDK-3 19 Series Cylinder Dogging Kit - 3' device 57 57 ― ― ― 

19CDK-4 19 Series Cylinder Dogging Kit - 4' device 57 57 ― ― ― 

24CDK-3 24 Series Cylinder Dogging Kit - 3' device ― 57 57 57 57 






54

Dummy Touch Bars 

SP28 US4 US10B US3, US32 

Model No. SP313 US10 US32D US26, US26D 

190DT 19 Series Dummy Touch Bar 179 - - - 

250DT 24/25 Series Dummy Touch Bar 307 341 388 443 

Optional Features: 

Prefix 

List Add 

RX Touchbar Request to Exit Switch 203 

KOR Key Override device monitoring on a door by use of a keyed cylinder 53 

REFERENCE NOTES: When used with outside trim for back to back mounting, finished fasteners are required, add $10.00 list. 

Note: price shown are for 3' length, for 4' length add $25.00 to list price. 

Electric and Alarm Kits 

US4 

SP28 US28 US10 US3 

Model No. Description Unfinished SP313 US32D 313AN US26D US26 

19-EAK-3 19 Series Exit Alarm Kit 3' — 372 372 — — — 

19-EAK-4 19 Series Exit Alarm Kit 4' — 372 372 — — — 

24-EAK-3 24 Series Exit Alarm Kit 3' — — 372 372 372 372 




19-HWEAK-3 19 Series Hard Wired Exit Alarm Kit 3' — 761 761 — — — 

19-HWEAK-4 19 Series Hard Wired Exit Alarm Kit 4' — 761 761 — — — 

24-HWEAK-3 24 Series Hard Wired Exit Alarm Kit 3' — — 761 761 761 761 




24-EDK-3 24 Series Electric Dogging Kit 3' — — 372 372 372 372 




ELK-3 24/25 Electric Latch Retraction Kit 3' — 506 506 — 506 506 

ELK-4 24/25 Electric Latch Retraction Kit 4' — 506 506 — 506 506 

24-AEK-3 24 Series Authorized Egress Switch Kit 3' — — 203 203 203 203 




24/25-LMK 24/25 Series Latch Bolt Monitoring Switch Kit 203 — — — — — 

24/25-DMK 24/25 Series Bar & Latch Bolt Monitoring Switch Kit 203 — — — — — 

24-KOR-K-3 24 Series Key Override Switch Kit 3' — — 203 203 203 203 






Extension Rods 

All 

Model No. Description Finishes 

650006 24/25/19/XX-V Extension Rod 12" 18 



650017 CV Extension Rod 12" 18 



Mortise Locks 

US3 

US4 

US26 

Model No. Description US10 US10B US26D 

8500NL Night Latch 300 312 373 


1. Old Mortise Lock model numbers: 1284-RHR and 1285-LHR 

2. US32D and US32 finish device supplied with US26D and US26 mortise lock. 

3. Mortise Device is handed. For replacement of Mortise Lock only, handing is field reversible. Lock is furnished RHR when handing is not specified. 

Optional Features: 

Prefix 

List Add 

LM Latch Bolt Monitoring Switch - Available on all functions 203 

DM Touch Bar and Latch Bolt Monitor Switch - Available on all functions 203 

FSA Electric Lock/Unlock Trim, Fail Safe - L and TP functions only. 288 

FSE Electric Lock/Unlock Trim, Fail Secure - L and TP functions only. 288 

▲ 

Mullions 

Up to 

Model No. Description 7'2" 8'2" 9'2" 10'2" 

2923 For use with all Rim Devices 333 360 388 428 

4023 For use with all Rim Devices 374 406 428 470 

F4023* Fire Rated; for use with F-19-R, F-24/25-R, and F-XX-R 535 578 — — 

4423 T Shaped, includes Strike 24-R series only 882 902 — — 

Mullion Options 

KR 

Strikes are not included except where indicated. 

When required, strikes should be ordered with devices. 

List Add 

Keyed Removable option Prefix mullion model "KR" 

KR-4023 Mullion 340 

KR-F-4023 Mullion 506 


List Each 

KR-4023 Keyed Removal Kit for existing 4023 Mullion 340 

KR-F4023 Keyed Removal Kit for existing F4023 Mullion 506 

List Add 

STAB Stabilizer Blocks - Optional for 2923, 4023 and 4423 Mullions. 31 

Specify mullion “ x STAB”. Stabilizers standard with F4023 mullions. 


Mullions are Prime Coat finish only. 

▲ Fire Rated for doors up to 8´ 



56

Sex Bolts 

BRS US3, US4 

US10B US10, SP313 

Model No. Description Screw US26D US32, US32D 

2729P Package of 1 10-24 3/4" PPHMS 6.50 — 

2729F Package of 1 10-24 3/4" FPHMS 6.50 — 

4122 Package of 1 1/2-20 3/4" PPHMS 6.50 — 

325 Package of 2 10-24 — 16 

425 Package of 2 1/4-20 — 16 

Shim Kits 

Model No. Description US19 

SK19-R 19 Rim Shim Kit - 1/4" 62 

SK19-V 19 Surface Vertical Shim Kit - 1/4" 62 

SK24-R 24 Rim Shim Kit - 1/4" 62 

SK24-V-8 24 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 62 

SK24-V-10 24 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 73 

SK25-R/M 25 Rim or 25 Mortise Shim Kit - 1/4" 62 

SK25V-8 25 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 62 

SK25V-10 25 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 73 

579 Retrofit Shim Kit - HH-25-R, HH-F25-R (Required) 25 


19 series shim kits for use on door thickness devices less trim. For devices with trim, consult factory. 

All shim kits for use on door thicknesses up to 2". Consult factory for door thickness over 2". 

SLM Blocking 

For use with devices on doors with special high density blocking material. 

Blocking material must be UL or Warnock Hersey approved. 

Model No. Description Part # 

SLM-F-24-R/C F-24 Rim/Concealed Vertical SLM Blocking Kit 600333 15 

SLM-F-24-V F-24 Surface Vertical SLM Blocking Kit 600334 17 

SLM-F-25-R/C F-25 Rim/Concealed Vertical SLM Blocking Kit 600335 15 

SLM-F-25-V F-25 Surface Vertical SLM Blocking Kit 600336 17 



(F) 19 Exit Devices 


Device Series - Parts 19 

SP28 

Part No. Description Unfinished SP313 US32D Black 

650307 19-R Center Case 70 – – – 

650374 F-19-R Center Case 87 – – – 

650308 19-V Center Case LHR 62 – – – 

650309 19-V Center Case RHR 62 – – – 

650384 19-R Center Case Cover Kit (w/Screws) – – – 31 

650385 19-V Center Case Cover Kit (w/Screws) – – – 31 

650338 19-R Center Case Cover Mounting Pkg 3.50 – – – 

650334 19-V Center Case Cover Mounting Pkg 3.50 – – – 

650393 19-V Center Case Retractor Cam 30 – – – 

650390 19-V Drawbar 9.50 – – – 

650391 19-V Center Case Drawbar Lever 18 – – – 

650392 19-V Center Case Slidebar Lever 12.50 – – – 

4107 19 Push Bar Channel 3' Door – 107 276 – 

4108 19 Push Bar Channel 4' Door – 123 305 – 

650360 F-19 Channel Cover Plate 3' – 32 32 – 

650361 F-19 Channel Cover Plate 4' – 35 35 – 

650362 19 CD Channel Cover Plate 3' – 38 38 – 

650363 19 CD Channel Cover Plate 4' – 43 43 – 

650364 19 EA Channel Cover Plate 3' – 60 60 – 

650365 19 EA Channel Cover Plate 4' – 67 67 – 

650297 19 Panic Hex Dogging Kit 4' Door – 69 102 – 

650303 19 Panic Hex Dogging Kit 3' Door – 50 81 – 

610480 19 Panic Dogging Housing 14 – – – 

060109 19 Panic Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – 

060110 19 Panic Dogging Pin (Pkg of 10) 3.50 – – – 

650343 19 Channel End Cap Kit (w/Screws) 20 – – – 

650320 19 End Cap Mounting Bracket with SNB – 9.50 – – 

650328 19-R Mounting Pkg – 23 23 – 

650329 F-19-R Mounting Pkg – 23 23 – 

650330 19-V Mounting Pkg – 35 35 – 

650331 F-19-V Mounting Pkg – 35 35 – 

600134 19-V AMS Mounting Kit 35 – – – 

060134 19 Device Mounting Screws (Pkg of 6) 3.50 – – – 

650335 Exit Alarm PCB Assy 244.00 – – – 

600164 19 Exit Alarm Mounting Kit 9.50 – – – 

650265 Exit Alarm Label 9.50 – – – 

600146 CD/EA Cylinder Retainer Brkt 10.00 – – – 

3722 Strike ASA Filler Plate 11 – – – 

060135 571579/565/2126A Screws (Pkg of 10) 3.50 – – – 

(F) 19-V Surface Vertical Rod and Latches 

SP28 

Part No. Description Unfinished SP313 US32D Black 

650389 19-V Top Latch Case (Latch cover sold separately) 102 – – – 

650388 19-V Latch Case Cover Kit (w/Screws) – – – 31 

650337 19-V Latch Cover Mounting Pkg 5.50 – – – 

650386 Rod Guide Kit (w/Screws) – – – 10.50 

610045 Bottom Bolt Assembly 35 – – – 

650387 Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – 

4286 19 Top Rod – 61 69 – 

4288 19 Bottom Rod – 61 69 – 

5494 F-19-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – 


58

24 Device Series - Parts 


US10 US4 

Part No. Description Unfinished US28 US32D 313AN US26D US26 US32 US3 

650233 24-R Center Case Kit 304 – – – – – – – 

650234 F-24-R Center Case Kit 478 – – – – – – – 

650236 (F) 24-V Center Case Kit 200 – – – – – – – 

650238 (F) 24-C Center Case Kit 191 – – – – – – – 

650247 24-R Center Case Cover Kit – 98 122 103 120 124 127 134 

650249 F-24-R Center Case Cover Kit – 98 122 103 120 124 127 134 

650251 (F) 24-V Center Case Cover Kit – 98 122 103 120 124 127 134 

650253 (F) 24-C Center Case Cover Kit – 98 122 103 120 124 127 134 

600307 24 Series Center Case Cover Mtg Pkg – 7.50 7.50 7.50 7.50 7.50 7.50 7.50 

661408 24 Push Bar Channel 3' Door – 63 79 68 77 80 82 87 


650121 F-24 Channel Cover Plate 3' – 32 32 32 32 32 32 32 


650117 24 CD Channel Cover Plate 3' – 38 38 38 38 38 38 38 


650131 24 EA Channel Cover Plate 3' – 60 60 60 60 60 60 60 


650139 24 KOR Channel Cover Plate 3' – 47 47 47 47 47 47 47 


650187 24 Hex Dogging Kit 3' – 51 51 51 51 51 51 51 

650188 24 Hex Dogging Kit 4' – 56 56 56 56 56 56 56 

610480 24 Panic Dogging Housing 14 – – – – – – – 

060109 24 Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – – – – – 

650294 24 Channel End Cap Kit 1-3/4" Door – 25 31 27 30 32 32 34 


600305 24 Series Channel Screw (Pkg of 10) 11.50 – – – – – – – 

600310 24 Series Push Bar End Cap Kit – 27 33 28 32 33 34 36 

600319 24 Series Push Bar Guide Pkg 9 – – – – – – – 

650324 (F) 24-R Mounting Pkg 1-3/4" Door 23 – – – – – – – 

650302 (F) 24-R Mounting Pkg 2-1/4" Door 23 – – – – – – – 

650304 24-V Mounting Pkg 1-3/4" - 2-1/4" Door 35 – – – – – – – 

650325 F-24-V Mounting Pkg 1-3/4" Door 35 – – – – – – – 


650318 24-C Mounting Pkg 1-3/4" Door 23 – – – – – – – 


650317 F-24-C Mounting Pkg 1-3/4" Door 23 – – – – – – – 


650326 24-CWDC Mounting Pkg 1-3/4" Door – – 49 49 – 49 49 49 

650298 24-CWDC Mounting Pkg 2-1/4" Door – – 49 49 – 49 49 49 

650327 F-24-CWDC Mounting Pkg 1-3/4" Door 49 – – – – – – – 

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 – – – – – – – 

600146 CD/EA Cylinder Retainer Bracket 10 – – – – – – – 

650265 Exit Alarm Label 9.50 – – – – – – – 

600320 EL Solenoid Pkg 144 – – – – – – – 

600321 EL Plunger Solenoid Pkg 54 – – – – – – – 

110388 EL Cable Assy 31 – – – – – – – 

650203 RX Switch Replacement Kit 125 – – – – – – – 

650210 LM Switch Replacement Kit 203 – – – – – – – 

650264 DM Switch Replacement Kit 203 – – – – – – – 


59 


(F) 24 Exit Devices - Latches and Rods 

Parts - Device Series 24 

US3 

SP313 US26 US4 

Part No. Description Unfinished SP28 US32D US26D US32 US10 

650389 24-V Top Latch Case 102 – – – – – 

650375 F-24-V Top Latch Case 102 – – – – – 

650202 24-V Latch Case Cover Kit – 55 55 70 70 70 

650336 24-V Latch Case Cover Mounting Pkg – – 5.50 – – 5.50 

650311 24-V Rod Guide Kit – 43 43 – 53 40 

650387 24-V Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – – – 

4450 24-V Top Rod Kit – 70 70 70 70 70 

610056 24-V Bottom Rod Kit – 96 96 96 96 96 

5494 F-24-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – – – 

603L 24-C Top Latch Case - LHR 151 – – – – – 

603R 24-C Top Latch Case - RHR 151 – – – – – 

F603 24C-CWDC, F-24-C Top Latch Case 225 – – – – – 

WF603 F-24-CWDC, Top Latch Case 225 – – – – – 

650339 (F) 24-C, CWDC Top Latch Release Kit – 33 33 41 – 28 

4567 24-C Bottom Bolt Guide 38 – – – – – 

4835 24-CWDC Bottom Bolt Guide 36 – – – – – 

4694 F-24-CWDC Latch Bracket 8.50 – – – – – 

650351 (F) 24-C, CWDC Center Slide Assy 235 – – – – – 

4832 (F) 24-CWDC Center Slide Reinforcement Plate 29 – – – – – 

650197 24-C Latch Mounting Bracket 5.50 – – – – – 

650198 F24-C Latch Mounting Bracket 6.50 – – – – – 

4833 (F) 24-CWDC Reinforcement Plate – – 36 36 36 36 

4834 (F) 24-CWDC Reinforcement Plate w/ Access Hole – – 36 36 36 36 

600150 LBR Plug 5.50 – – – – – 

610061 (F) 24-C, CWDC Top Rod Kit 70 – – – – – 

610057 (F) 24-C, CWDC Bottom Rod Kit 96 – – – – – 

5494 F-24-C Auxiliary Fire Latch Kit (LBR application only) 343 – – – – – 



60

25 Device Series - Parts 


US10 US4 

Part No. Description Unfinished US28 US32D 313AN US26D US26 US32 US3 

650239 25-R Center Case Kit 141 – – – – – – – 

650240 F-25-R Center Case Kit 152 – – – – – – – 

650242 (F) 25-V Center Case Kit 120 – – – – – – – 

650244 (F) 25-C, CWDC Center Case Kit 109 – – – – – – – 

650246 (F) 25-M Center Case Kit RHR 120 – – – – – – – 

650398 (F) 25-M Center Case Kit LHR 120 

650255 (F) 25-R Center Case Cover Kit – 102 128 109 126 130 133 140 

650257 (F) 25-V Center Case Cover Kit – 102 128 109 126 130 133 140 

650259 (F) 25-C, M Center Case Cover Kit – 102 128 109 126 130 133 140 

600307 25 Series Center Case Cover Mtg Pkg – 7.50 7.50 7.50 7.50 7.50 7.50 7.50 

650261 25-V/M/C Center Case Housing Kit 16 – – – – – – – 

600308 25-V/M/C Center Case Housing Screw Pkg 7 – – – – – – – 

650262 25-V Center Case Finger Kit 30 – – – – – – – 

650263 25-C Center Case Finger Kit 20 

600309 25-V/C Center Case Finger Screw Pkg 8 – – – – – – – 

650378 25-M Center Case Slide Bar Assy RHR 62 – – – – – – – 

650377 25-M Center Case Slide Bar Assy LHR 62 – – – – – – – 

650379 DM/LM 25-M Slide Bar LHR 68 – – – – – – – 

650380 DM/LM 25-M Slide Bar RHR 68 – – – – – – – 











650191 25 Series Hex Dogging Kit 3' – 51 51 51 51 51 51 51 

650192 25 Series Hex Dogging Kit 4' – 56 56 56 56 56 56 56 

610480 25 Dogging Housing 14 – – – – – – – 

060109 25 Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – – – – – 



600305 25 Series Channel Screw (Pkg of 10) 11.50 – – – – – – – 

600310 25 Series Push Bar End Cap Kit – 27 33 28 32 33 34 36 

600319 25 Series Push Bar Guide Pkg 9 – – – – – – – 

650345 (F) 25-R/M Mounting Pkg 1-3/4" Door 16 – – – – – – – 

650293 (F) 25-R/M Mounting Pkg 2-1/4" Door 16 – – – – – – – 

650315 25-V Mounting Pkg 1-3/4" - 2-1/4" Door 35 – – – – – – – 







650299 (F) 25-CWDC Mounting Pkg 1-3/4" Door – – 49 49 – 49 49 49 

650296 (F) 25-CWDC Mounting Pkg 2-1/4" Door – – 49 49 – 49 49 49 

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 – – – – – – – 




Parts - Device Series 25 

US3 



600146 CD/EA Cylinder Retainer Bracket 10 – – – – – 

650265 Exit Alarm Label 9.50 – – – – – 

600320 EL Solenoid Pkg 144 – – – – – 

600321 EL Plunger Solenoid Pkg 54 – – – – – 

110388 EL Cable Assy 31 – – – – – 

650203 RX Switch Replacement Kit 125 – – – – – 

650210 LM Switch Replacement Kit 203 – – – – – 

650264 DM Switch Replacement Kit 203 – – – – – 

(F) 25 Exit Devices - Latches and Rods 

US3 



650389 25-V Top Latch Case 102 – – – – – 

650375 F-25-V Top Latch Case 102 – – – – – 

650202 25-V Latch Case Cover Kit – 55 55 70 70 70 

650336 25-V Latch Case Cover Mounting Pkg – 2.50 2.50 2.50 2.50 2.50 

650311 25-V Rod Guide Kit – – 43 – 53 40 

650387 25-V Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – – – 

3777 25-V Top Rod Kit – 70 70 70 70 70 

610055 25-V Bottom Rod Kit – 96 96 96 96 96 

5494 F-25-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – – – 

603L 25-C Top Latch Case - LHR 151 – – – – – 

603R 24-C Top Latch Case - RHR 151 – – – – – 

F603 25C-CWDC, F-25-C Top Latch Case 225 – – – – – 

WF603 F-25-CWDC Top Latch Case 225 – – – – – 

650339 (F) 25-C, CWDC Top Latch Release Kit – 33 33 41 – 28 

4567 25-C Bottom Bolt Guide 38 – – – – – 

4835 25-CWDC Bottom Bolt Guide 36 – – – – – 

4694 F-25-CWDC Latch Bracket 8.50 – – – – – 

650376 (F) 25-C, CWDC Center Slide Assy 235 – – – – – 

4832 (F) 25-CWDC Center Slide Reinforcement Plate 29 – – – – – 

650197 25-C Latch Mounting Bracket 5.50 – – – – – 

650198 F25-C Latch Mounting Bracket 6.50 – – – – – 

4833 (F) 25-CWDC Reinforcement Plate – – 36 36 36 36 

4834 (F) 25-CWDC Reinforcement Plate w/Access Hole – – 36 36 36 36 

600150 LBR Plug 5.50 – – – – – 

– – – – – 

610061 (F) 25-C, CWDC Top Rod Kit 70 – – – – – 

610057 (F) 25-C, CWDC Bottom Rod Kit 96 – – – – – 

5494 F-25-C Auxiliary Fire Latch Kit (LBR application only) 343 – – – – – 



62

XX Device Series - Parts 

(F) XX Exit Devices 

US3 

US4 US10B US26 

Part No. Description Unfinished US10 US32D US26D US32 

585 XX-R-EO/TP Center Case 241 – – – – 

685 F-XX-R-EO/TP Center Case 389 – – – – 

610262 XX-R-K/L Center Case 203 – – – – 

587 XX-V-EO Center Case 161 – – – – 

687 F-XX-V-EO Center Case 264 – – – – 

582 XX-V-K/L Center Case 201 – – – – 

FE582 FSE-XX-V-K/L Center Case 489 – – – – 

F582 F-XX-V-K/L Center Case 307 – – – – 

583 XX-V-TP Center Case 198 – – – – 

F583 F-XX-V-TP Center Case 318 – – – – 

591 XX-C Center Case 197 – – – – 

691 F-XX-C Center Case 501 – – – – 

650145 XX-M Center Case LHR 272 – – – – 

650146 XX-M Center Case RHR 272 – – – – 

650149 F-XX-M Center Case LHR 272 – – – – 

650150 F-XX-M Center Case RHR 272 – – – – 

3740 XX-R Center Case Cover – 66 79 94 94 

3742 XX-V Center Case Cover – 66 79 94 94 

3741 XX-M/C Center Case Cover – 66 79 94 94 

650381 XX-M Slide Bar Assy LHR 47 – – – – 

650382 XX-M Slide Bar Assy RHR 47 – – – – 

661180 XX-R Latch Bolt Assy 57 – – – – 

607 XX-R Latch Bolt Assembly 57 – – – – 

610044 XX-M/V/C Axle Support Housing Assy 63 – – – – 

3566 XX-V Locking Cam 8.50 – – – – 

3755 XX-R Knob Cam 30 – – – – 

3762 Locking Cam 6.50 – – – – 

3754 XX-R NL Cam 2.50 – – – – 

610221 XX-V NL Cam 30 – – – – 

3775 XX-V Knob Cam 30 – – – – 

3770 XX-R Main Cam Spring 5.50 – – – – 

610070 XX-R Back Plate 69 – – – – 

584 XX Series End Case 135 – – – – 

684 F-XX Series End Case 231 – – – – 

3746 XX Series Lever Arm RH – 50 57 69 69 

3747 XX Series Lever Arm LH – 50 57 69 69 

3749 XX Series Lever Arm Axle 9.50 – – – – 

3767 XX Series Crossbar – 81 81 81 81 

660025 1/4-20 Crossbar Retaining Screw 4.50 – – – – 

060109 Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – – 

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 – – – – 



(F) XX Exit Devices 

Parts - Series Devices XX 

US3 



650113 XX-R Mounting Package 23 – – – – 

650133 F-XX-R Mounting Package 23 – – – – 

650332 XX-V Mounting Package 35 – – – – 

650134 F-XX-V Mounting Package 35 – – – – 

650318 XX-C Mounting Package 23 – – – – 

650317 F-XX-C Mounting Package 23 – – – – 

650301 F-XX-C-WDC Mounting Package 49 – – – – 

650299 XX-C-WDC Mounting Package – 49 49 – 49 

650137 XX-M Mounting Package 43 – – – – 

650138 F-XX-M Mounting Package 43 – – – – 

650141 XX-R AMS Mounting Package 23 – – – – 

650333 XX-V AMS Mounting Package 35 – – – – 

650323 XX-C AMS Mounting Package 23 – – – – 

650142 XX-M AMS Mounting Package 43 – – – – 

F) XX Exit Devices - Latches and Rods US3 



650389 XX-V Top Latch Case 102 – – – – 

650375 F-XX-V Top Latch Case 102 – – – – 

650202 XX-V Latch Case Cover Kit – 70 55 – 70 

650336 XX-V Latch Case Cover Mounting Pkg – 5.50 5.50 – – 

650311 XX-V Rod Guide Kit – 40 43 – 53 

650387 XX-V Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – – 

3777 XX-V Top Rod Kit – 70 70 – 70 

610055 XX-V Bottom Rod Kit – 96 96 – 96 

5494 F-XX-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – – 

603L XX-C Top Latch Case LHR 151 – – – – 

603R XX-C Top Latch Case RHR 151 – – – – 

F603 F-XX-C, CWDC Top Latch Case 225 – – – – 

WF603 F-XX-C-CWDC Top Latch Case 225 – – – – 

650339 XX-C Top Latch Release Sub Assembly – 28 33 41 28 

4567 XX-C Bottom Bolt Guide 38 – – – – 

4835 XX-CWDC Bottom Bolt Guide 36 – – – – 

4694 XX-CWDC Latch Bracket 9 – – – – 

610037 XX-C Center Slide Assy 235 – – – – 

4832 XX-CWDC Center Slide Reinforcement Plate 29 – – – – 

650197 XX-C Latch Mounting Bracket 5.50 – – – – 

650198 F-XX-C Latch Mounting Bracket 6.50 – – – – 

4833 (F) XX-CWDC Reinforcement Plate – 36 36 36 36 

4834 (F) XX-CWDC Reinforcement Plate w/ Access Hole – 36 36 36 36 

610061 (F) XX-C Top Rod Kit 70 – – – – 

610057 (F) XX-C, CWDC Bottom Rod Kit 96 – – – – 

5494 F-XX-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – – 



64

◆ 

◆ 

◆ 

◆ 

◆ 

◆ 

● 

● 

● 

● 

8500 Mortise Lock - Parts 

8500 Mortise Lock US4 US3, US26 

Part No. Description Unfinished US10B US10 US26D 

3515 Lock Face Plate – 52 47 71 

3516 T-Lift Spring 5.50 – – – 

3518 Dead Lock Arm Spring 5.50 – – – 

3519 Knob Cam 30 – – – 

3521 Actuator Arm 7.50 – – – 

3522 Main Lift 7.50 – – – 

3529 Auxiliary Bolt 7.50 – – – 

3530 Auxiliary Bolt Actuator 29 – – – 

650306 Auxiliary Bolt Spring 5.50 – – – 

650310 Deadlocking Arm 29 – – – 

3542 Cylinder Operating Arm 29 – – – 

4025 Cylinder Screw Retainer 3.50 – – – 

4067 Locking Arm 31 – – – 

610042 Locking Arm and Spring Assembly 32 – – – 

610041 Latch Bolt Assembly 57 – – – 

Mullion - Parts 

Mullion 

Part No. Description Unfinished 

060106 Top Fittings for 4023 Mullion 53 

060102 Bottom Fittings for 4023 Mullion 53 





4988 Cylinder Removable Mullion Adjustment Shim (1/8" Thick) 29 

4965 Cylinder Removable Mullion Top Fitting 78 

060103 Stabilizer Blocks with Mounting Screws Pkg/4 31 

4966 KR Cylinder Retainer Bracket 8.50 

060101 KR Mullion Mounting Kit 18 

19 Trim Series - Parts 


Part No. Description Unfinished 

600314 910TP/911K/912L Cylinder Nut 5.50 

600166 918NL Cylinder Mounting Pkg 5.50 

4218 912L Washer 3.50 

4268 911K/912L Locking Plate 14 

4270 900 Series Hex Stud 3.50 

4275 912L Spring Plate 14 

4326 912L Lever Spring 3 

600315 920/930 Cylinder Anchor 14 

600161 911/912/914 Tailpiece Guide Pkg 6.50 

4841 912L Lever Return Spring 5.50 

050526 900 Series, Cylinder Nut 9 

650314 K/L Locking Plate 13.50 

650319 912L Series Lever Actuator Spring 5 

650321 911K Series Knob Actuator Spring 5 

610196 910/911/912 Actuator Shaft Assembly 23 

◆ For Trims Shipped before 02/28/2011 

● For Trims Shipped after 02/28/2011 




Parts - Trim Series 24 

US26D 

US3 

Part No. Description Unfinished SP28 SP313 US32D US10 US4 US26 

4120 710NL, 718C/NL Cylinder Spacer Collar 5.50 – – – – – 

4121 710NL, 718C/NL Cylinder Anchor Plate 5.50 – – – – – 

● 650371 Tailpiece Package 1-3/4" Door 6 – – – – – 

● 650372 Tailpiece Package 2-1/4" Door 6 – – – – – 

4270 700 Series Trim Hex Stud 3.50 – – – – – 

4349 718DT/NL Control Hex Stud 3.50 – – – – – 

4302 712L-DT Lever Plate 14 – – – – – 

● 650314 K/L Locking Plate 13.50 – – – – – 

● 650322 711/712-R/V Retainer Plate 34 – – – – – 

4326 712 Lever Spring Clip 3 – – – – – 

● 650319 Lever Actuator Spring 5 – – – – – 

● 650321 Knob Actuator Spring 5 – – – – – 

650366 TP/K/L Actuator Shaft Assembly 23 – – – – – 

● 600283 Shear Pin Kit 8 – – – – – 

● 600298 711 Knob Assembly – 110 116 137 140 142 151 

● 050006 712L Dane Lever Kit – 131 131 131 149 131 180 

● 050003 712L Sutro Lever Kit – 131 131 131 149 131 180 

● 050017 712L Quantum Lever Kit – 131 131 131 149 131 180 

● 050007 712L Avalon Lever Kit – 131 131 131 149 131 180 

650151 715DT Mounting Package 1-3/4" – – 10.50 10.50 – 10.50 – 






650169 718C/NL-R/V Mounting Package 1-3/4" – – 10.50 10.50 – 10.50 – 

650170 718C/NL-R/V Mounting Package 2-1/4" – – 10.50 10.50 – 10.50 – 

● 650367 718NL-C Mounting Package 1-3/4" Door – – 23 23 – 23 – 

● 650368 718NL-C Mounting Package 2-1/4" Door – – 23 23 – 23 – 

● 650369 718C-C Mounting Package 1-3/4" Door – – 23 23 – 23 – 

● 650370 718C-C Mounting Package 2-1/4" Door – – 23 23 – 23 – 

650189 711/712/719 Mounting Package 1-3/4" 5.50 – – – – – – 

650190 711/712/719 Mounting Package 2-1/4" 5.50 – – – – – – 

600288 711/712/719 Pull Grip Screw Pkg 2.50 – – – – – – 

● For Trims Shipped after 02/28/2011 



66

24 Trim Series - Parts 


SP28 US26D US10 US4 

Part No. Description Unfinished SP313 US32D US26 US32 US3 

◆ 4131 718C/NL Cylinder Retaining Bracket 6.50 – – – – – 

◆ 4218 712 Lever Washer 3.50 – – – – – 

◆ 4268 TP/K/L/TL Locking Plate 14 – – – – – 

◆ 4275 712 Spring Plate 14 – – – – – 

◆ 4605 710/711/712/719 Control Actuator Spring 2 – – – – – 

◆ 4841 712 Lever Return Spring 5.50 – – – – – 

◆ 600267 719 Rod Member Pkg – 52 52 52 52 52 

◆ 610119 711 Knob Assembly – 63 63 63 63 63 

◆ 650355 712 Dane Lever – 72 72 72 72 72 

◆ 650356 712 Sutro Lever – 72 72 72 72 72 

◆ 650358 712 Quantum Lever – 72 72 72 72 72 

◆ 650313 710TP Retainer Clip 29 – – – – – 

◆ 650312 711/712-R/V Retainer Plate 35 – – – – – 

◆ 610205 711/712-C Retainer Plate 1-3/4" 35 – – – – – 

◆ 610464 711/712-C Retainer Plate 2-1/4" 35 – – – – – 

◆ 060124 711/712/719 3/8" - 16 Locknut (Package of 10) 4.50 – – – – – 

◆ 660471 TP/K/L/TL Solid Rivet 2.00 – – – – – 

◆ 650157 710DT Mounting Package 1-3/4" – 5.50 5.50 – 5.50 – 

◆ 650158 710DT Mounting Package 2-1/4" – 5.50 5.50 – 5.50 – 

◆ 650161 710NL Mounting Package 1-3/4" – 17 17 – 17 – 

◆ 650162 710NL Mounting Package 2-1/4" – 17 17 – 17 – 

◆ 650165 710TP Mounting Package 1-3/4" – 10.50 10.50 – 10.50 – 


◆ 650173 718NL-C Mounting Package 1-3/4" – 23 23 – 23 – 

◆ 650174 718NL-C Mounting Package 2-1/4" – 23 23 – 23 – 

◆ 650177 718C-CV Mounting Package 1-3/4" – 23 23 – 23 – 

◆ 650178 718C-CV Mounting Package 2-1/4" – 23 23 – 23 – 





◆ For Trims shipped before 02/25/2011 




Parts - Trim Series 25 

US26D US4 US3 

Part No. Description Unfinished SP28 SP313 US32D US10 US32 US26 

600272 510 Backplate Assembly 21 – – – – – – 

600273 510/512/513 Slider 61 – – – – – – 

600282 511L Slider Assy 139 – – – – – – 

090041 Hook Spring Pkg 6.50 – – – – – – 

600274 510/511L Spring (Package of 2) 16 – – – – – – 

600284 512TP/513K Spring (Package of 2) 9.50 – – – – – – 

600275 510L/512TP/513K Locking Hook 21 – – – – – – 

600281 510L-NL/512NL/513K-NL Cam 24 – – – – – – 

600276 L/K Spindle Cam Kit 24 – – – – – – 

600280 L-NL/L-DT Spindle Cam Kit 26 – – – – – – 

600277 510/511/513 Spindle Cam Retaining Ring (Pkg of 10) 2.50 – – – – – – 

650267 510L/513K Shear Pin (Package of 10) 19 – – – – – – 

600283 511L Shear Pin (Package of 5) 8 – – – – – – 

600278 500 Series Cylinder Lock Nut 9 – – – – – – 

600279 500 Series Cylinder Nut Tool 15 – – – – – – 

600296 500 Series Security Collar – 19 20 23 23 24 25 

600289 Lower Pull Bracket Kit 1.3/4" – – 10.50 12.50 – 12.50 – 

600290 Lower Pull Bracket Kit 2.1/4" – – 10.50 12.50 – 12.50 – 

600285 512TP Thumbpiece – 28 30 35 36 36 38 

600286 512TP Thumbpiece Pivot Pin 6.50 – – – – – – 

600287 512TP Thumbpiece Bracket 10.50 – – – – – – 

600297 512TP Pull – 111 118 138 141 144 152 

600298 513K Knob Assy – 110 116 137 140 142 151 

050006 510L Dane Lever Kit – 131 131 131 149 131 180 

050003 510L Sutro Lever Kit – 131 131 131 149 131 180 

050017 510L Quantum Lever Kit – 131 131 131 149 131 180 

050007 510L Avalon Lever Kit – 131 131 131 149 131 180 

600288 Pull Grip Screw (Package of 10) 2.50 – – – – – – 

650231 512 Mounting Pkg 1-3/4" – – 3.50 3.50 – 6.50 – 

650232 512 Mounting Pkg 2-1/4" – – 3.50 3.50 – 6.50 – 

650235 510/511/512/513 Screw Pkg 1-3/4" 2.50 – – – – – – 

650237 510/511/512/513 Screw Pkg 2-1/4" 2.50 – – – – – – 

600293 FSA/FSE Solenoid Kit 116 – – – – – – 

600294 FSA/FSE Solenoid Plunger 17 – – – – – – 

600295 FSA/FSE Pivot Pin 2 – – – – – – 

650278 FSA/FSE Solenoid Spring 4.50 – – – – – – 



68

◆ 

◆ 

◆ 

◆ 

Parts Maintenance Kit 

Part No. Description List Price 

650277 24/25 Maintenance Kit 1565 

Refill Parts/Packages Refill New Kit 

List Price Contents 

Part No. Description Each Qty 

299 Strike 299 Strike US19 45 5 

325 SNB 325 Sex Bolt, 1/4-20 US32D (Package of 2) 16 10 

425 SNB 425 Sex Bolt, 10-24 US32D (Package of 2) 16 10 

600314 Cylinder Nut 3.50 10 

4208 CD/EA/KOR Cylinder Retaining Bracket 5.50 30 

060126 512/718 Lever Washer (Package of 10) 5.50 1 

4275 712 Spring Plate 14.00 10 

4326 712/912 Lever Spring Clip 3 10 

4841 712/912 Lever Return Spring 5.50 10 

650311 Rod Guide Kit US32D 43 6 

650311 Rod Guide Kit SP28 43 2 

650311 Rod Guide Kit SP313 43 2 

060109 Hex Dogging Key 7/32" (Package of 10) 12.50 1 

650231 512 Mtg Pkg US4 1-3/4" Dr 6.50 2 

650231 512 Mtg Pkg US10B 1-3/4" Dr 2.50 2 

650231 512 Mtg Pkg US26D 1-3/4" Dr 2.50 6 

650294 24/25 End Cap Kit US32D 1-3/4" Dr. 31 6 

650294 24/25 End Cap Kit US26D 1-3/4" Dr. 30 2 

650294 24/25 End Cap Kit SP28 1-3/4" Dr. 25 1 

650294 24/25 End Cap Kit SP313 1-3/4" Dr. 27 1 

600283 511 Trim Shear Pin (Package of 5) 8 6 

640001 24 Device Plastic Mounting Template 2.50 2 

640002 25 Device Plastic Mounting Template 2.50 2 

650267 510/513 Trim Shear Pin (Package of 10) 19 3 

060112 8500 Lock Housing Screws (Package of 10) 4.50 2 

060113 24/25-C Latch Screw (Package of 10) 4.50 5 

060114 Rod Guide Screws (Package of 10) 4.50 3 

060119 510/511/512/513 Back Plate Screws (Package of 10) 4.50 5 

600309 25 Lift Finger Screws (Package of 2) 8 10 

600173 8500 Lock Face Screws US3/US4/US10 3 10 

600173 8500 Lock Face Screws US26D/US32D 3 10 

600173 8500 Lock Face Screws US10B 3 10 

060120 8500 Lock Backplate Screws (Package of 10) 4.50 5 

060121 24/25-V Latch Cover Screws US26D/US32D/US28 (Package of 10) 4.50 5 

060121 24/25-V Latch Cover Screws US3/US4/US10 (Package of 10) 4.50 5 

060121 24/25-V Latch Cover Screws US10B (Package of 10) 4.50 5 

060123 Electric Option Dogging Screw (Package of 10) 4.50 5 

060122 K-NL/L-NL Spindle Cam Screw (Package of 10) 9 2 

060124 K/L/TL Trim Lock Nut (Package of 10) 4.50 1 

600305 24/25 Channel Screw (Package of 10) 11.50 3 

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 5 

600279 Cylinder Nut Tool (package of 5) 15 2 

060125 FSE/FSE Trim Pivot Pin (Package of 10) 4.50 2 

600319 24/25 Pushbar Guide (Package of 2) 9 10 

600278 25 Trim Cylinder Locknut 9 10 

◆ For Trims shipped before 02/25/2011 



(continued) Parts Maintenance Kit 

Refill Parts/Packages Refill New Kit 

List Price Contents 

Part No. Description Each Qty 

060117 25 Center Case Mtg Screws (Package of 10) 4.50 5 

060118 24 Center Case Housing Screws (Package of 10) 4.50 5 

060116 25-R/M Device Mounting Screws (Package of 10) 5.50 5 

060115 FSA/FSE Trim Screws (Package of 10) 4.50 5 

600307 24/25 Center Case Cover Screws US3 (Package of 4) 7.50 12 



600307 24/25 Center Case Cover Screws 31AN (Package of 4) 7.50 12 

600307 24/25 Center Case Cover Screws US26D/US32D/SP28 (Package of 4) 7.50 12 

600277 510/513 Spindle Cam Ret. Ring (Package of 10) 2.50 2 

600308 25 Housing Plate Screws (Package of 2) 7 2 

970321 299 Strike Shim 8 20 



70

Numerical Index 

Part No. Page 

582 63 

583 63 

584 63 

585 63 

587 63 

Part No. Page 

4268 65,67 

4270 65,66 

4275 65,67,69 

4286 58 

4288 58 

Part No. Page 

600288 66,68 

600289 68 

600290 68 

600296 68 

600297 68 

Part No. Page 

6650135 61 

650136 61 

650137 64 

650138 64 

650139 59 

591 63 

603L 60,62,64 

603R 60,62,64 

607 63 

684 63 

4302 66 

4326 65,66,69 

4349 66 

4450 60 

4567 60,62,64 

600298 66,68 

600305 59,61,69 

600307 59,61,69 

600308 61,69 

600309 61,69 

650140 59 

650141 64 

650142 64 

650143 61 

650144 61 

685 63 

687 63 

691 63 

3515 65 

3516 65 

4605 67 

4694 60,62,64 

4832 60,62,64 

4833 60,62,64 

4834 60,62,64 

600310 59,61 

600314 65,69 

600315 65 

600319 59.61.69 

600320 59 

650145 63 

650146 63 

650149 63 

650150 63 

650151 66 

3518 65 

3519 65 

3521 65 

3522 65 

3529 65 

4835 60,62,64 

4841 65,67,69 

4965 65 

4966 65 

4988 65 

600321 59 

610037 64 

610041 65 

610042 65 

610044 63 

650152 66 

650153 66 

650154 66 

650157 67 

650158 67 

3530 65 

3542 65 

3566 63 

3722 58 

3740 63 

5494 58,60,62,64 

110388 59 

600134 58 

600146 59 

600150 60,62 

610045 58 

610055 62,64 

610056 60 

610057 60,62,64 

610061 60,62,64 

650161 67 

650162 67 

650165 67 

650166 67 

650169 66 

3741 63 

3742 63 

3746 63 

3747 63 

3749 63 

600161 65 

600166 65 

600173 69 

600267 67,68 

600272 68 

610070 63 

610119 67 

610196 65 

610205 67 

610221 63 

650170 66 

650173 67 

650174 67 

650177 67 

650178 67 

3754 63 

3755 63 

3762 63 

3767 63 

3770 63 

600273 68 

600274 68 

600275 68 

600276 68 

600277 68,69 

610464 67 

610480 58,59,61 

640001 69 

640002 69 

650113 64 

650181 66 

650182 66 

650185 67 

650186 67 

650187 59 

3775 63 

3777 62,64 

4025 65 

4067 65 

4107 58 

600278 68,69 

600279 68,69 

600280 68 

600281 68 

600282 68 

650116 59 

650117 59 

650119 61 

650120 61 

650121 59 

650188 59 

650189 66 

650190 66 

650191 61 

650192 61 

4108 58,69 

4120 66 

4121 66 

4131 67 

4218 65,67 

600283 66,68,69 

600284 68 

600285 68 

600286 68 

600287 68 

650122 59 

650131 59 

650132 59 

650133 64 

650134 64 

650193 67 

650194 67 

650197 60,62,64 

650198 60,62,64 

650201 59 



Numerical Index 

Part No. Page 

650202 60,62,64 

650203 59 

650210 59 

650227 61 

650228 61 

Part No. Page 

650307 58 

650308 58 

650309 58 

650310 65 

650311 60,62,64,69 

Part No. Page 

650371 66 

650372 66 

650374 58 

650375 60,62,64 

650376 62 

Part No. Page 

060112 69 

060113 69 

060114 69 

060115 70 

060116 70 

650231 68,69 

650232 68 

650233 59 

650234 59 

650235 68 

650312 67 

650313 67 

650314 65,66 

650315 61 

650316 61 

650377 61 

650378 61 

650379 61 

650380 61 

650381 63 

060117 70 

060118 70 

060119 69 

060120 69 

060121 69 

650236 59 

650237 68 

650238 59 

650239 61 

650240 61 

650317 59,61,64 

650318 59,61,64 

650319 65,66 

650320 58 

650321 65,66 

650382 63 

650384 58 

650385 58 

650386 58 

650387 58,60,62,64 

060122 69 

060123 69 

060124 67,69 

060125 69 

060126 69 

650242 61 

650244 61 

650246 61 

650247 59 

650249 59 

650322 66 

650323 64 

650324 59 

650325 59 

650326 59 

650388 58 

650389 58,60,62,64 

650390 58 

650391 58 

650392 58 

090041 68 

F582 63 

F583 63 

F603 60,62,64 

FE582 63 

650251 59 

650253 59 

650255 61 

650257 61 

650259 61 

650327 59 

650328 58 

650329 58 

650330 58 

650331 58 

650393 58 

650398 61 

660025 63 

660471 67 

661180 63 

WF603 60,62,64 

650261 61 

650262 61 

650263 61 

650264 59,60,66 

650265 59 

650332 64 

650333 64 

650334 58 

650336 60,62,64 

650337 58 

661408 59 

661409 59 

661412 61 

661413 61 

050003 66,68 

650267 69 

650277 69 

650278 68 

650293 61,68 

650294 59,61,68,69 

650338 58 

650339 60,62,64 

650343 58 

650345 61 

650346 59,61 

050006 66,68 

050007 66,68 

050017 66,68 

050526 65 

060101 65 

650295 61,68 

650296 61 

650297 58 

650298 59 

650299 61,64 

650348 59,61 

650351 60 

650355 67 

650356 67 

650358 67 

060102 65 

060103 65 

060104 65 

060105 65 

060106 65 

650300 59,61 

650301 64 

650302 59 

650304 59 

650306 65 

650366 66 

650367 66 

650368 66 

650369 66 

650370 66 

060107 65 

060108 65 

060109 

58,59,61,63,69 

060110 58 

060111 58,61,63,69 



72

Notes 




Devices 

1990 Series .............................................................................3 

2090 Series .............................................................................4 

1490 Series .............................................................................5 

1590 Series .............................................................................6 

1690 Series .............................................................................7 

1790 Series .............................................................................8 

2390 Series .............................................................................9 

Power Supply, Electric Power Transfer.................................10 

Lever Control, Offset Pull, Cylinders.....................................11 

Cylinder Assemblies/Retractors/Risers ................................11 

Mullions/Strikes.....................................................................12 

Parts 

1990 Series......................................................................13-15 

Crossbar Devices..................................................................16 

2090 Series......................................................................17-20 

1490/1590 Series............................................................ 21-24 

EL1490/1590 Series ........................................................25-26 

1490 Series Rod Assembly...................................................27 

1490/1590 Series Cylinder Assembly...................................28 

1690 Series......................................................................29-31 

1790 Series......................................................................32-33 

2390 Series......................................................................34-36 

2390 Series Cylinder Assembly ............................................37 

Strike/Mullion/Trim ................................................................37 

Finish List 

U.S. Standard BHMA Description 

US28 628 Anodized Aluminum – Clear 

DC13 710 Anodized Aluminum – Dark Bronze 

DC35 711 Anodized Aluminum – Black 

P28 689 Painted Aluminum – Silver 

P13 695 Painted Aluminum – Dark Bronze 

P35 622 Painted Aluminum – Black 

US3 666 Bright Brass 

US4 667 Satin Brass 

US9 705 Bright Bronze 

US10 668 Satin Bronze 

US10B 703 Oxidized Satin Bronze 

US14 669 Bright Nickel 

US15 670 Satin Nickel 

US26 672 Bright Chrome 

US26D 702 Satin Chrome 

Consult factory for availability of other finishes. 

Index 

Index by Model Number .......................................................39 

Index by Part Number .....................................................40-41 

Please refer to IRFASTTRACK Price Book for products available in 24-hours or 5-days. 

1-877-671-7011 (Press 1, then 6) 

Fax: 1-800-288-4242 

Email: order_fasttrack@irco.com 


Phone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242 

email: order_fasttrack@irco.com 


1


2 



email: order_fasttrack@irco.com

Concealed Vertical Rod 

Crossbar Exit Devices 

1990 Series 

Devices are priced for 3´8˝ x 7´, 

Aluminum or Hollow Metal Doors. 

Hex Bottom Latch furnished standard. 

(Price includes PB48 Strike) 

P13, US3, US4, US26, US14, 

Model No. P28 P35 US10 US10B US26D US15 Standard Trim 

1990EO 409 421 949 1031 1031 1371 – 

1991DT 561 573 1236 1328 1377 1717 9970 Pull 

1992NL-OP/HB-OP 453 465 993 1075 1075 1415 Rim Cylinder only 

1993NL/HB 605 617 1280 1372 1421 1761 9970 w/Rim Cylinder 

Optional Latches 

Suffix 

List Add 

RL Rod Bottom Latch 24 

PL Pullman Bottom Latch 25 

ES Top Latch for use with Electric Strikes 29 

(Device Furnished LBR - Less Bottom Rod - Less Strike, Deduct $19.00 List) 

Door Heights over 7' 

List Add 

Up to 8' 55 

Up to 9' 72 

Up to 10' 83 

Crossbar 

Crossbar furnished 41" standard - Easily Cut for Job Fitting 

List Add 

Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 finishes 16 

Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural finishes 26 

Less Crossbar (Deduct) 105 


Specify if Door Material other than Aluminum. 

Not recommended for use on wood doors. 





3

Rim Type 

Crossbar Exit Devices 

2090 Series 

Devices are priced for 3'8", 


(Price includes SD36 Strike) 

Handed - Not Reversible 

P13, US3, US4, US26, US14, 

Model No. P28 P35 US10 US10B US26D US15 Standard Trim 

2090EO 347 361 890 965 965 1271 – 

2091DT 499 513 1177 1262 1311 1617 9970 Pull 

2092NL-OP/HB-OP 391 405 934 1009 1009 1315 Rim Cylinder only 

2093NL/HB 543 557 1221 1306 1355 1661 9970 w/Rim Cylinder 

Crossbar 

Crossbar furnished 41" standard - Easily Cut for Job Fitting 

List Add 

Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 Finishes 16 

Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural Finishes 26 

Less Crossbar (Deduct) 105 


Specify Handing RHR or LHR. Not Reversible. 



4 





Touchbar Exit Devices 

1490 Series 

Devices are priced for 36" x 7', 


RL Bottom Latch furnished standard. 

(Price includes PB48 Strike.) 

PUSH 

▲ ▲ ▲ 

DC13, US3, US4, US14, 

Model No. US28 DC35 US10 US10B US15 Standard Trim 

1490EO 693 711 1481 1523 1523 - 

1491DT 845 863 1768 1820 1869 9970 Pull 

1492NL-OP 777 795 1565 1607 1607 ★ 149CA-NL 

w/Rim Cylinder 

1493HB-OP 777 795 1565 1607 1607 ★ 149CA-HB 


1494NL-P 929 947 1852 1904 1953 9970 Pull 

★ 149CA-NL 


1495HB-P 929 947 1852 1904 1953 9970 Pull 

★ 149CA-HB 


1498 485 485 1276 1276 1276 - 


Specify Handing RHR or LHR. 


Not recommended for use on wood doors. 

Device furnished RHR standard when handing is not specified. Both RHR and LHR labels are provided. 

Device size furnished standard 36" for 7' door height if not specified. 

Cylinders are included in price for NL and HB functions. 

▲ Channel extrusion furnished in DC35 for US3, US4, US10, US10B, US14 and US15 finishes. 

★ Cylinder assembly furnished in DC35 finish, unless specified. Available finishes DC13, US28 & DC35. 

✹ 


List Add 

Extra Length 42” 1490 Device 35 

48” 1490 Device 72 

Extra Length 42” 1498 Device 17 

48” 1498 Device 24 

Extension Rods For Door Heights over 7' up to 10' 92 

Door Thickness For Doors greater than 1 3/4" up to 2 1/4" 19 

using cylinder assembly 

Rim Cylinder For Door with cylinder assembly 44 

7 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 19 

Risers (1/2") Specify device “x Riser” (example 1490EO x 36" x US28 x Riser) 78 

Centerlines Change from 40 9/16" standard Device Centerline 92 

HH Hurricane Device. Available up to 8' device only. 16 

Signal Switch Base Exit Device unit modified with signal switch (SPDT) 347 

indicating latch condition. Prefix device "S". 

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction 791 

and Signal Switch (SPDT). Prefix device "EL". 


✹ One PS914 x 900-2RS minimum requirement to power one or two EL devices. See page 10 for power supply requirements and options. 





5

Rim Type 

Touchbar Exit Devices 

1590 Series 

Devices are priced 36", 


(Price includes TD35 Strike. Retractors included with device specified with cylinder operation.) 

● 

● 

● 

● 

▲ ▲ ▲ 

DC13, US3, US4, US14, 

Model No. US28 DC35 US10 US10B US15 Standard Trim 

1590EO 582 603 1373 1412 1412 - 

1591DT 734 755 1660 1709 1758 9970 Pull 

1592NL-OP 666 687 1457 1496 1496 ★ 159CA-NL 


1593HB-OP 666 687 1457 1496 1496 ★ 159CA-HB 


1594NL-P 818 839 1744 1793 1842 9970 Pull 

★ 159CA-NL 


1595HB-P 818 839 1744 1793 1842 9970 Pull 

★ 159CA-HB 


PUSH 



Device furnished non-handed with RHR and LHR Pushbar labels for field installation. 

Device size furnished standard 36" if not specified. 

Cylinders are included in price on NL and HB functions. 

● Specify if used on pair of doors with Mullion. 

▲ Channel extrusion furnished in DC35 for US3, US4, US10, US10B, US14 and US15 finishes. 

★ Cylinder assembly furnished in DC35 finish, unless specified. Available finishes DC13, US28 & DC35. 

✹ 


List Add 

Matching Dummy Touchbar Specify 1498 series. Refer to page 5 for pricing. – 

Extra Length 42" 1590 Device 35 

48” 1590 Device 72 

Door Thickness For Doors greater than 1 3/4" up to 2 1/4" 19 

using cylinder assembly 

Rim Cylinder For Door with cylinder assembly 44 

7 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 19 

Risers (1/2") Specify device "x Riser" (example 1590EO x 36" x US28 x Riser) 78 

Signal Switch Base Exit Device unit modified with signal switch (SPDT) 347 

indicating latch condition. Prefix device “S”. 

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction 791 

and Signal Switch (SPDT). Prefix device “EL”. 







▲ ✹ ■ 

✹ ■ 


Pushpad Exit Devices 

1690 Series 

Devices are priced for 30", 36" x 7', 




DC13, 

Model No. US28 DC35 US3 US10 US26 US26D Standard Trim 

1690EO 419 446 545 525 545 525 – 

1691DT 571 598 832 812 891 871 9970 Pull 

1692NL-OP/HB-OP 463 490 589 569 589 569 169CA 


1694NL-P/HB-P 615 642 876 856 935 915 9970 Pull 

169CA 



Devices are supplied 36" x 7' standard, if not specified. 

Extra Length 

List Add 

42" 16 

48" 26 


Suffix 

List Add 



ES Top Latch for use with Electric Strikes 29 

(Device Furnished LBR - Less Bottom Rod - Less Strike, deduct $20 List) 

Less Rods For retrofit of 1990 crossbar device (Deduct) 43 

Door Heights over 7' 

List Add 

Up to 8' 55 

Up to 9' 72 

Up to 10' 83 


List Add 

RX Switch Base Exit Device unit modified Request to Exit Switch 190 

monitoring pushpad. Prefix device "RX". 

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 510 

Prefix device "EL". 

Electric Dogging Base Exit Device unit modified with Electric Dogging 510 

Prefix device "ED". 



■ For EL1690 Door widths other than the standard size (30˝, 36˝, 42˝ or 48˝), please specify exact door width. 

▲ Device must be ordered with EL option. Conversion kits not available. 





7

▲ ✹ ■ 

✹ ■ 

Rim Type 

Pushpad Exit Devices 

1790 Series 

Devices are priced for 30" and 36", 


(Price includes TD35 Strike) 

DC13, 

Model No. US28 DC35 US3 US10 US26 US26D Standard Trim 

1790EO 385 411 510 491 510 491 – 

1791DT 537 563 662 643 662 643 9970 Pull 

1792NL-OP/HB-OP 429 455 554 535 554 535 179CA 


1794NL-P/HB-P 581 607 706 687 900 687 9970 Pull 

179CA 



Devices are supplied 36" x 7' standard, if not specified. 

Extra Length 

List Add 

42" 16 

48" 26 


List Add 



Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 510 

Prefix device "EL". 

Electric Dogging Base Exit Device unit modified with Electric Dogging 510 

Prefix device "ED". 



■ For EL1790 Door widths other than the standard size (30˝, 36˝, 42˝ or 48˝), please specify exact door width. 


Lever Control 

P28, US3, 

P13, US10, 

P35 

US32D 

179L Lever Control 265 295 

179L-BE Lever Control, Blank Escutcheon 265 295 

179L-NL Lever Control, Night Latch 265 295 


Trims are handed. Specify handing RHR or LHR. 





■ 

■ 

■ 


Mid-Panel Exit Devices 

2390 Series 

Devices are priced for 42", 48" x 7', 

Aluminum Doors. 



DC13, 

Device Fits Door DC35, 

Model No. Size Opening US28 CHAMPAGNE Standard Trim 

2390EO 21" up to 42" 636 654 – 

2390EO 24" up to 48" 679 697 – 

2392NL/HB-OP 21" up to 42" 786 804 Mortise Cylinder Assy with Cylinder 

2392NL/HB-OP 24" up to 48" 829 847 Mortise Cylinder Assy with Cylinder 

2395NL/HB-OP 21" up to 42" 726 744 Mortise Cylinder Assy less Cylinder 

2395NL/HB-OP 24" up to 48" 769 787 Mortise Cylinder Assy less Cylinder 

2398 Dummy 21" up to 42" 350 371 – 

2398 Dummy 24" up to 48" 379 400 – 


Must specify centerline of device. 

Optional Cylinder Kit 

List Add 

239CA NL/HB Kit Less Cylinder 90 

231CA NL/HB Kit Less Cylinder w/ Schlage Cam B502-191 93 

3215 Mortise Cylinder 60 

2" Door Kit For Cylinder Operation 34 


Suffix 

List Add 



ES Top Latch for use with Electric Strike 29 

(Device furnished LBR - Less Bottom Rod - Less Strike, deduct $20 List) 


List Add 

Long Top Rod For Door Height from 7’ to 8’ 21 

Top Rod with Extension For Door Height from 8’ to 9’ 72 

Top Rod with Extension For Door Height from 9’ to 10’ 83 

Extension Rod Kit For Door Height 7’ to 10’ Field Installation 113 

Channel with Up to 42˝ Door, 371/2˝ Channel US28 80 

1/4˝ Glass Stops DC13, DC35, Champagne 90 

Up to 48˝ Door, 43 1/2˝ Channel US28 84 

DC13, DC35, Champagne 121 

Filler Plate Up to 42˝ Door, 16 1/2˝ Filler Plate US28 23 


Up to 48˝ Door, 19 1/2˝ Filler Plate US28 24 



■ Rod Length requirement varies with device mounting height. 


List Add 



▲ Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 510 

Prefix device "EL". See Page 10 for Power Supply Requirements. 






9

▲ 

▲ 

Power Supply 

Electric Power Transfer 

All PS900 Series power supplies and option boards have been tested and certified to meet UL294. 

EL Power Supply 


PS914 4 AMP High Inrush Base List 593 


When specifying PS914 power supply for use with “EL” Electric Latch Retraction devices, the 2RS board is furnished when board option not specified. 

One PS914 x 900-2RS minimum requirement to power one or two EL devices. 

Option Boards 

Model No. Suffix Description List Add 

900-2RS x2RS 2 Relay Output (PS914 ONLY) 145 

900-4R x4R 4 Relay Output 140 

900-BBK Battery Backup Board and Batteries 200 


PS914 can have a combination of one or two option boards. 

For field installation, use model number. Example: 900-2RS. 

Power Supply Overview 

Installation has been simplified in the PS900 series of Power Supplies by utilizing a flat mounting design and polarized locking 

connectors for option boards. This new design eliminates the need for racks and side connectors. The flat mounting of the 

option boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrified 

panic devices, strikes, card readers, etc.) Common to the line of PS900 Series power supplies is a constant output rating at both 

12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interface 

board mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal provided. 

▲ 

Electric Power Transfer 

SP28, 

Model No. Description SP313 

EPT10 Ten 24 gauge wires. 24VDC 1 ampere. 467 


▲ Refer to Von Duprin price book for current pricing of these items. 





Lever Control 

P28, US3, 

P13, US10, 

Model No. P35 US32D 

179L Lever Control 265 295 

179L-BE Lever Control - Blank Escutcheon 265 295 

179L-NL Lever Control - Night Latch 265 295 


Lever Controls are Handed. Specify handing RHR or LHR. 

Offset Pull 

Can be used with all devices except 2390 series. DC13, US3, US4, US26, 

Model No. US28 DC35 US10 US10B US26D 

9970 Pull 152 152 287 297 346 

Cylinders 

US28, 

US26D, 

DC13, US4, US10B, 

Model No. DC35 US10 315AN 

PB8 Rim Cylinder 44 44 - 

3215 Mortise Cylinder - - 60 

Cylinder Assembly 

US28, 

DC13, 

Model No. 

DC35 

149CA-NL Cylinder Assembly Less Cylinder 40 

149CA-HB Cylinder Assembly Less Cylinder 40 

▲ 159CA-NL Cylinder Assembly Less Cylinder 40 

▲ 159CA-HB Cylinder Assembly Less Cylinder 40 

169CA Cylinder Assembly Less Cylinder 27 



231CA Cylinder Assembly Less Cylinder w/ Schlage Cam B502-191 93 


Door Thickness greater than 1 3/4" up to 2 1/4", add $19 list. 

7 Pin Cylinder applications, add $19 list. 

With Cylinder Add $60 list for 2390 and add $44 list for other cylinder assembly. 

▲Retractors required for cylinder operation are sold separately below. 

Retractors 

For field conversion of 1590 inactive device to NL or HB functions. 

Model No. 

List Price 

RTR10 1590 Retractor Single Door 13 

RTR11 1590 Retractor Single Door with Riser 13 

RTR12 1590 Retractor Pair with Mullion 1 3/4" Door 13 

RTR13 1590 Retractor Pair with Mullion 2 1/4" Door 13 

Risers 

Model No. 

List Price 

RSR1490 1490 Riser Pkg 78 

RSR1590 1590 Riser Pkg 78 





11

Mullions 

Aluminum Removable Mullions shipped complete with mounting brackets, screws, stabilizers 

and adjustable mortise strike. 

For Openings Up to: 

RM70 

(2090 Rim Devices) DC13, 

US28 DC35 

7'2" 641 679 

8'2" 689 730 

9'2" 739 779 

10'2" 792 831 

RM150 

(1590 Rim Device) 

7'2" 652 689 

8'2" 704 741 

9'2" 756 795 

10'2" 807 847 

RM170 

(1790 Rim Device) 

7'2" 641 679 

8'2" 689 730 

9'2" 739 779 

10'2" 792 831 

Mullion Stabilizer 

525 Mullion Stabilizers (set of 2) 38 42 


For use on doors with stiles as narrow as 1 1/4", reinforced with steel insertions. 

Blank Mullions (without strike preparation) are available at the same price as standard Mullions. 

Strikes 

Strikes - Concealed Vertical Rod P28 P13 P35 US32D 

PB48 Top strike for 1990/1490/1690/2390 devices – 20 20 20 

Strikes - Rim 

STK45 Strike for inactive leaf, pr of drs with 1590/1790/2090 devices – – 72 – 

SD35 Strike for 1/3" x 1/2" blade stop, 2090 device. 70 70 70 – 

SD36 Strike for all stops, 2090 device. 70 70 70 – 

TD35 Strike for single doors, 1590 or 1790 device. – – 103 – 

Strikes - Mullions 

STK70 Adjustable mortise strikes (pair). – – – 109 




The RD64 strike has been discontinued. The Von Duprin 264 strike can be used for applications previously requiring the RD64. 

The RD43 & RD44 strikes have been discontinued. The Von Duprin 1609 strike can be used for applications previously requiring the 

RD43 or RD44. 





Exploded View 

And Parts List 

1990 Series 

(For Devices Furnished After 5/1/77) 

24 

25 

33 

18 

10 

11 

12 

14 

17 

35 38 

6 

5 

3 

4 

17 

2 

34 38 

31 

8 

29 

37 

21 

4 

30 

20 

13 

11 

16 

8 

31 

4 

9 

29 

32 

36 

39 

27 

22 

7 

Left LEFT Hand HAND REVERSE Reverse SHOWN Shown 

28 

26 

10 

23 

10 

10 

18 

33 

1990 Series 


Model 

No. Description Part No. Finish 

Pkg 

Qty 

List 

Price 

2 PB2 Case Mounting Stud STUD.101 – 10 21.00 

3 PB3 Bearing Bushing BUSH.109 – 10 18.00 

4 PB4 Retaining Ring .250 RRING.109 – 25 14.00 

5 PB5 Pinion Cam CAM.102 – 10 102.00 

PB140 Pinion Cam 4270903177 – each 14.00 

6 PB10 Cylinder Bushing BUSH.102 – 10 18.00 

7 PB12 1/4-20 1" FPHTC Typ 23 SCREW.1027 US32D 10 29.00 

PB12 1/4-20 1" FPHTC Typ 23 SCREW.1015 BLACK 10 29.00 

8 PB13 990 Axle Pin PIN.106 US32D 10 94.00 

PB15 1990 Axle Pin PIN.115 – 10 94.00 

9 PB14 Dog Screw SCREW.1022 – 25 82.00 

10 PB17 10-32 1/4" UFPHMS SCREW.1028 US32D 10 16.00 

PB17 10-32 1/4" UFPHMS SCREW.1029 BLACK 10 16.00 





13

1990 Series 


Model 


Pkg 

Qty 

List 

Price 

11 PB23 Rod Jam Nut NUT.101 – 10 16.00 

12 ■ PB24 SU/PL/ES/RL Rod 4270100017 – each 26.00 

SU/PL/ES/RL Rod-1/4" Insulclad 7’ 4270102427 – each 26.00 

SU/PL/ES/RL Rod-1/4" Insulclad 8’ 4270102426 – each 81.00 

13 PB25 Hex Bottom Rod 4270101825 – each 26.00 

14 PB30 Allen Wrench WRENCH.101 – 10 12.50 

16 PB35 Rod Retractor RETRACT.101 – 10 41.00 

17 PB38 1/4-20 3/8" Hex Soc Set SCREW.1030 US32D 25 23.00 

PB38 1/4-20 3/8" Hex Soc Set SCREW.1039 BLACK 25 23.00 

18 PB54 Latch Mtg Bracket Kit-HMD BRKTASY.101 – each 36.00 

21 PB88 Lift Bracket Assembly 4270100013 – each 17.00 

22 PB99 Hex Dogging Key KEY.101 – 10 29.00 

23 ● PB129 RL Bottom Latch 4270100521 – each 70.00 

24 ● PB130 SU Top Latch 4270101806 – each 82.00 

25 ● PB131 ES Top Latch 4270100346 – each 96.00 

26 ● PB132 PL Bottom Latch 4270101482 – each 70.00 

27 PB133 Hex Bottom Bolt 4270101830 – each 31.00 

28 PB134 Hex Rod Guide Assembly 4270107176 US32D each 30.00 

PB134 Hex Rod Guide Assembly 4270107178 P35 each 30.00 

Hex Rod Guide Screws SCREW.1076 US28 10 6.50 

Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 6.50 

ES Latch Pin PIN.110 – 10 16.00 

Case Retainer RETAIN.101 – 10 18.00 

SU/ES/PL/HH Latch Spirol Pin PIN.109 – 10 13.00 

Crossbar Tie Rod 4270100312 – each 53.00 

End Case Retaining Ring RRING.103 – 25 9.00 

▲ RD9 Old Style Tension Spring SPRING.102 – 10 26.00 

29 RD10 Spring Pin PIN.104 – 10 16.00 

30 SD9 Tension Spring SPRING.103 – 10 23.00 

31 SD43 Axle Bushing BUSH.103 – 25 23.00 

32 SD45 Spring Retainer RETAIN.102 – 25 14.00 

33 SR33 10-32 3/8" FPHMS SCREW.1037 – 25 14.00 

● RA1 SU Top Rod Assembly 7' Dr 4270106632 – each 111.00 




● RA5 ES Top Rod Assembly 7' Dr 4270101873 – each 139.00 

ES Top Rod Assembly 8' Dr 4270101874 – each 211.00 

● RA6 RL Bottom Rod Assembly 4270100522 – each 111.00 

RA7 Hex Bottom Rod Assembly 4270101831 – each 58.00 

● RA8 PL Bottom Rod Assembly 4270100266 – each 113.00 

SU Rod 8’ Door 4270100018 – each 81.00 

SU Ext Rod Kit Up to 9’ Dr (not shown) 4270100172 – each 72.00 

SU Ext Rod Kit Up to 10’ Dr (not shown) 4270100197 – each 83.00 

■ Standard SU Top Rod or Standard PL, ES or RL Bottom Rod. 

● Specify if door material other than aluminum. Complete rod and latch assembly includes PB24 standard rod and PB23 nut. 

Part numbers shown are for standard centerlines and assembled lengths. 

▲ Not shown in parts diagram. For devices shipped before May 1977. 





1990 Series 


Model 

No. Part No. Finish List Price 

34 End Case Assy LH 

(Includes part numbers: 4, 8, 9, 17, 29, 31, 32, 36, 38) 

LH = Lock Stile assembly for LHR Device or 

Hinge Stile assembly for RHR Device 

DCX-2 4270902776 P28 150.00 

DCX-2 4270902778 P13 165.00 

DCX-2 4270902779 P35 165.00 

PBX-1 CASE.210 US3 427.00 

PBX-1 CASE.214 US4 483.00 

PBX-1 CASE.216 US10 427.00 

PBX-1 CASE.218 US10B 483.00 

PBX-1 CASE.223 US26D 483.00 

PBX-1 CASE.221 US26 483.00 

PBX-1 CASE.233 US15 628.00 

PBX-1 CASE.231 US14 628.00 

36 Lever Arm LH 

LH = Lock Stile Lever Arm for LHR Device or 

Hinge Stile Lever Arm for RHR Device 

DC15 4270902799 P28 45.00 

DC15 4270902802 P13 52.00 

DC15 4270902803 P35 52.00 

SD15* LARM.173 US3 137.00 

SD15* LARM.174 US4 175.00 

SD15* LARM.175 US10 137.00 

SD15* LARM.176 US10B 175.00 

SD15* LARM.180 US26D 175.00 

SD15* LARM.179 US26 175.00 

SD15* LARM.178 US15 206.00 

SD15* LARM.177 US14 206.00 

38 Housing Assembly 

(Includes housing, retainer spring, retainer, dog screw and mounting screws) 

DC1 4270902787 P28 90.00 

DC1 4270902789 P13 105.00 

DC1 4270902790 P35 105.00 

SD1* HOUSING.218 US3 277.00 

SD1* HOUSING.225 US4 302.00 

SD1* HOUSING.226 US10 277.00 

SD1* HOUSING.229 US10B 302.00 

SD1* HOUSING.231 US26D 302.00 

SD1* HOUSING.230 US26 302.00 

SD1* HOUSING.238 US15 416.00 

SD1* HOUSING.237 US14 416.00 

* 1990/2090 Lever Arms & Housing Assemblies in US finishes 

are not compatible with 990/1090 components. Replace with 

appropriate end case assembly or active housing assembly. 



Model 


35 End Case Assy RH 

(Includes part numbers: 4, 8, 9, 17, 29, 31, 32, 37, 38) 

RH = Lock Stile assembly for RHR Device or 

Hinge Stile assembly for LHR Device 

DCX-2 4270902782 P28 150.00 

DCX-2 4270902784 P13 165.00 

DCX-2 4270902785 P35 165.00 

PBX-1 CASE.209 US3 427.00 

PBX-1 CASE.213 US4 483.00 

PBX-1 CASE.215 US10 427.00 

PBX-1 CASE.217 US10B 483.00 

PBX-1 CASE.222 US26D 483.00 

PBX-1 CASE.220 US26 483.00 

PBX-1 CASE.232 US15 628.00 

PBX-1 CASE.230 US14 628.00 

37 Lever Arm RH 

RH = Lock Stile Lever Arm for RHR Device or 

Hinge Stile Lever Arm for LHR Device 

DC40 4270902805 P28 45.00 

DC40 4270902808 P13 52.00 

DC40 4270902809 P35 52.00 

SD40* LARM.181 US3 137.00 

SD40* LARM.182 US4 175.00 

SD40* LARM.183 US10 137.00 

SD40* LARM.184 US10B 175.00 

SD40* LARM.188 US26D 175.00 

SD40* LARM.187 US26 175.00 

SD40* LARM.186 US15 206.00 

SD40* LARM.185 US14 206.00 

39 Crossbar 41" 

PB39 4270900091 US28 105.00 

PB39 4270900094 DC13 115.00 

PB39 4270900095 DC35 115.00 

PB39 CBAR.102 US3 253.00 

PB39 CBAR.132 US4 274.00 

PB39 4270900097 US10 253.00 

PB39 4270900098 US10B 274.00 

PB39 CBAR.209 US15 306.00 

PB39 CBAR.208 US14 306.00 

Crossbar 48" 

CBAR.101 US28 121.00 

CBAR.116 DC13 131.00 

CBAR.135 DC35 131.00 

CBAR.143 US3 279.00 

CBAR.148 US4 300.00 

CBAR.160 US10 279.00 

CBAR.120 US10B 300.00 

CBAR.207 US15 332.00 

CBAR.206 US14 332.00 



15

Crossbar Devices 

1990 Auxiliary Pkg. 2090 Auxiliary Pkg. 

PBX-2 

Part No. 4270902091 US32D List Price 36.00 

4270902095 DC35 36.00 

RDX-2 

Part No. 4270902121 US32D List Price 11.50 

4270902125 DC35 11.50 

Panic Device Repair Kit 

List Price 

PB20 Complete Repair Kit 4270100583 252.00 

Maintenance Kit Box only 4270100582 17.00 

Kit Includes: 

Part Number Description Replacement Pkg. 

12 RING.108 Retaining Rings RRING.109 (pkg/25) 

6 4270100130 1/4-20 x 3/8 Set Screws SCREW.1030 (pkg/25) 

6 BUSH.108 Bearing Bushing BUSH.109 (pkg/10) 

8 4270101753 Tension Springs SPRING.103 (pkg/10) 

2 4270100153 Dogging Screws SCREW.1022 (pkg/25) 

10 4270100108 10-32 x 1/4 UFPH MS SCREW.1028 (pkg/10) 

6 4299100213 1/4-20 x 1" FPH MS SCREW.1027 (pkg/10) 

3 4270100152 Spring Pins PIN.104 (pkg/10) 

1 4270100116 Dogging Key KEY.101 (pkg/10) 

1 4270100218 1/8" Allen Wrench WRENCH.101 (pkg/10) 

3 4270100110 Retractor RETRACT.101 (pkg/10) 

4 4270903177 Pinion Cams CAM.102 (pkg/10) 

8 4230100017 Center Case Mounting Studs STUD.101 (pkg/10) 

12 4299100961 8-32 x 1/2" UFPH TC Screws SCREW.1032 (pkg/25) 

8 4270100151 Tension Springs SPRING.102 (pkg/10) 

6 4270101778 Axle Bushings BUSH.103 (pkg/25) 

3 4270108348 PB48 Strike US32D EACH 

3 4270106026 PB48 Strike Shims SHIM.112 (pkg/10) 

4 4270100663 Cylinder Bushings BUSH.102 (pkg/10) 

1 4270100013 Lift Bracket Assy EACH 

4 4270106997 Axle Pins PIN.115 (pkg/10) 

2 4270100026 3/16 x 13/16 Roll Pins PIN.109 (pkg/10) 

2 4270100075 3/16 x 9/16 Roll Pins PIN.110 (pkg/10) 

1 4270100299 Dogging Key Tag EACH 

12 4299100997 Retaining Rings RRING.103 (pkg/25) 

1 4270100582 Maintenance Kit Box EACH 

Parts Kit For Easy Servicing 

Of 1990 Devices 




16 


2090 Series 


37 

12 

15 

16 

1 11 

4 

3 

14 

13 26 

1 

9 

32 

37 

8 6 

30 

2 

31 

33 

11 

30 

34 

28 

1 

36 

8 6 

2 

7 

39 

31 

33 

7 5 

35 

29 

Left Hand Reverse Shown 





17

Exploded View 


2090 Series 


Model Pkg List 

No. Description Part No. Finish Qty Price 

1 PB2 Case Mounting Stud STUD.101 - 10 21.00 

2 PB53 Retaining Ring .250 RRING.103 - 10 9.00 

3 PB5 Pinion Cam CAM.102 - 10 102.00 

PB140 Pinion Cam 4270903177 - each 14.00 

4 PB10 Cylinder Bushing BUSH.102 - 10 18.00 

5 PB12 1/4-20 1" FPHTC TYP23 SCREW.1027 US32D 10 29.00 

PB12 1/4-20 1" FPHTC TYP23 SCREW.1015 BLACK 10 29.00 

6 PB13 1090 Axle Pin PIN.106 SS 10 94.00 

PB15 2090 Axle Pin PIN.115 US32D 10 94.00 

Latch Pivot Pin PIN.116 – 10 9.50 

7 PB14 Dog Screw SCREW.1022 - 25 82.00 

9 PB30 Allen Wrench WRENCH.101 - 10 12.50 

11 PB38 1/4-20 3/8" Hex Soc Set Screw SCREW.1030 US32D 25 23.00 

PB38 1/4-20 3/8" Hex Soc Set Screw SCREW.1039 BLACK 25 23.00 

12 PB42 Adapter Plate Assembly 4270100304 - 2 21.00 

13 PB61 Latch Spring SPRING.104 - 10 11.50 

14 PB62 Latch Link 4270101840 - each 10.00 

15 PB63 4-40 3/8" FL Posi-Drive Screw SCREW.1031 - 10 10.00 

16 PB64 Latchbolt Retractor RETRACT.102 - 10 118.00 


28 PB89 2090 Backplate Assembly LHR 4270902968 - each 49.00 

PB89 2090 Backplate Assembly RHR 4270902974 - each 49.00 

29 PB99 Hex Dogging Key KEY.101 - 10 29.00 

Crossbar Tie Rod 4270100312 - each 53.00 

30 RD10 Spring Pin PIN.104 - 10 16.00 

31 ▲ RD9 Old Style Tension Spring SPRING.102 - 10 26.00 

SD9 Tension Spring SPRING.103 - 10 23.00 

32 SD43 Axle Bushing BUSH.103 - 25 23.00 

33 SD45 Spring Retainer RETAIN.102 - 25 14.00 

REFERENCE NOTE: 

▲Not shown in parts diagram. 


18 




2090 Series 


Model 


34 End Case Assy LH 

(Includes part numbers: 2, 6, 7, 11, 25, 31, 32, 33, 35, 37) 

LH = Hinge Stile assembly for RHR Device 

DCX-2 4270902776 P28 150.00 

DCX-2 4270902778 P13 165.00 

DCX-2 4270902779 P35 165.00 

PBX-1 CASE.210 US3 427.00 

PBX-1 CASE.214 US4 483.00 

PBX-1 CASE.216 US10 427.00 

PBX-1 CASE.218 US10B 483.00 

PBX-1 CASE.223 US26D 483.00 

PBX-1 CASE.221 US26 483.00 

PBX-1 CASE.233 US15 628.00 

PBX-1 CASE.231 US14 628.00 

35 Lever Arm LH - Active 

LH = Lock Stile Lever Arm for LHR Device 

DC16 4270902763 P28 45.00 

DC16 4270902766 P13 52.00 

DC16 4270902767 P35 52.00 

SD16* LARM.209 US3 137.00 

SD16* LARM.210 US4 175.00 

SD16* LARM.211 US10 137.00 

SD16* LARM.212 US10B 175.00 

SD16* LARM.216 US26D 175.00 

SD16* LARM.215 US26 175.00 

SD16* LARM.214 US15 206.00 

SD16* LARM.213 US14 206.00 

36 Lever Arm LH - End Case 

LH = Hinge Stile Lever Arm for RHR Device 

DC15 4270902799 P28 45.00 

DC15 4270902802 P13 52.00 

DC15 4270902803 P35 52.00 

SD15* LARM.173 US3 137.00 

SD15* LARM.174 US4 175.00 

SD15* LARM.175 US10 137.00 

SD15* LARM.176 US10B 175.00 

SD15* LARM.180 US26D 175.00 

SD15* LARM.179 US26 175.00 

SD15* LARM.178 US15 206.00 

SD15* LARM.177 US14 206.00 

Model 


34 End Case Assy RH 

(Includes part numbers: 2, 6, 7, 11, 25, 31, 32, 33, 34, 36) 

RH = Hinge Stile assembly for LHR Device 

DCX-2 4270902782 P28 150.00 

DCX-2 4270902784 P13 165.00 

DCX-2 4270902785 P35 165.00 

PBX-1 CASE.209 US3 427.00 

PBX-1 CASE.213 US4 483.00 

PBX-1 CASE.215 US10 427.00 

PBX-1 CASE.217 US10B 483.00 

PBX-1 CASE.222 US26D 483.00 

PBX-1 CASE.220 US26 483.00 

PBX-1 CASE.232 US15 628.00 

PBX-1 CASE.230 US14 628.00 

35 Lever Arm RH - Active 

RH = Lock Stile Lever Arm for RHR Device 

DC41 4270902769 P28 45.00 

DC41 4270902772 P13 52.00 

DC41 4270902773 P35 52.00 

SD41* LARM.189 US3 137.00 

SD41* LARM.197 US4 175.00 

SD41* LARM.199 US10 137.00 

SD41* LARM.201 US10B 175.00 

SD41* LARM.205 US26D 175.00 

SD41* LARM.203 US26 175.00 

SD41* LARM.208 US15 206.00 

SD41* LARM.207 US14 206.00 

36 Lever Arm RH - End Case 

RH = Hinge Stile Lever Arm for LHR Device 

DC40 4270902805 P28 45.00 

DC40 4270902808 P13 52.00 

DC40 4270902809 P35 52.00 

SD40* LARM.181 US3 137.00 

SD40* LARM.182 US4 175.00 

SD40* LARM.183 US10 137.00 

SD40* LARM.184 US10B 175.00 

SD40* LARM.188 US26D 175.00 

SD40* LARM.187 US26 175.00 

SD40* LARM.186 US15 206.00 

SD40* LARM.185 US14 206.00 

* 1990/2090 Lever Arms & Housing Assemblies in US finishes are not compatible with 990/1090 components. Replace with appropriate 

end case assembly or active housing assembly. 





19

2090 Series 


Model 


37 Active Housing Assembly LH 

(Includes part numbers: 3, 4, 14, 15, 28, 34) 

LH = Lock Stile assembly for LHR Device 

DCX-1 4270902740 P28 191.00 

DCX-1 4270902742 P13 204.00 

DCX-1 4270902743 P35 204.00 

RDX-1 CASE.236 US3 498.00 

RDX-1 CASE.237 US4 552.00 

RDX-1 CASE.238 US10 498.00 

RDX-1 CASE.239 US10B 552.00 

RDX-1 CASE.243 US26D 552.00 

RDX-1 CASE.242 US26 552.00 

RDX-1 CASE.241 US15 697.00 

RDX-1 CASE.240 US14 697.00 

39 Crossbar 41" 

PB39 4270900091 US28 105.00 

PB39 4270900094 DC13 115.00 

PB39 4270900095 DC35 115.00 

PB39 CBAR.102 US3 253.00 

PB39 CBAR.132 US4 274.00 

PB39 4270900097 US10 253.00 

PB39 4270900098 US10B 274.00 

PB39 CBAR.209 US15 306.00 

PB39 CBAR.208 US14 306.00 

Model 


37 Active Housing Assembly RH 

(Includes part numbers: 3, 4, 14, 15, 28, 34) 

RH = Lock Stile assembly for RHR Device 

DCX-1 4270902746 P28 191.00 

DCX-1 4270902748 P13 204.00 

DCX-1 4270902749 P35 204.00 

RDX-1 CASE.211 US3 498.00 

RDX-1 CASE.224 US4 552.00 

RDX-1 CASE.225 US10 498.00 

RDX-1 CASE.226 US10B 552.00 

RDX-1 CASE.229 US26D 552.00 

RDX-1 CASE.228 US26 552.00 

RDX-1 CASE.235 US15 697.00 

RDX-1 CASE.234 US14 697.00 

Crossbar 48" 

CBAR.101 US28 121.00 

CBAR.116 DC13 131.00 

CBAR.135 DC35 131.00 

CBAR.143 US3 279.00 

CBAR.148 US4 300.00 

CBAR.160 US10 279.00 

CBAR.120 US10B 300.00 

CBAR.207 US15 332.00 

CBAR.206 US14 332.00 




20 


1490/1590 Series 

Pushbar 

1490 1590 

19 

10 

7 

4 

1 

19 

10 

7 

3 

20 

8 

2 

5 

7 

6 

8 

14 

18 

9 

21 

12 

6 

2 

 

3 

13 

7 

14 

18 

9 

12 

2 

3 7 

13 

 

1490/1590 Series 

Pushbar 



1 PB17 10-32 1/4" UFPHMS Screw SCREW.1028 – 10 16.00 

2 PB200 1490/1590 Pushbar Mounting Bracket 4270106786 – each 17.00 

3 PB201 1490/1590 Pushbar End Cap 4270106787 P35 each 35.00 

4 PB202 1590 Pushbar End Cap 4270106875 P35 each 14.00 

5 PB203 1590 Center Case Cover P35 4270106863 P35 each 21.00 

6 PB204 1490/1590 P/Bar Hingeside Mounting Plate 4270106770 – each 10.00 

7 ● PB205 8-32 1" FH Torx Screw SCREW.1050 – 10 23.00 

PB205 8-18 1.14" FPH TF Typ 25 SCREW.1143 – 10 16.00 

8 PB206 12-24 1 1/2" UFPHMS Screw (1490) SCREW.1282 – 10 17.00 

PB219 12-24 1" UFPHMS Screw (1590) SCREW.1066 – 10 17.00 

9 PB207 12-24 1" PPH W/SEMS EXT TF Screw SCREW.1053 – 10 18.00 

10 PB208 8-32 1/4" UFPHMS Screw SCREW.1012 US32D 10 9.00 

PB208 8-32 1/4" UFPHMS Screw SCREW.1055 BLACK 10 9.00 

12 PB210 Pushbar Bumper 4' (2 ea. Required) BUMPER.103 – each 9.00 

13 PB211 Short Arm Key KEY.102 – 10 27.00 

14 PB212 1490 RHR/1590 LHR Push Label 4270107321 BLACK each 21.00 

PB213 1490 LHR/1590 RHR Push Label 4270107323 BLACK each 21.00 

PB214 1490 RHR/1590 LHR Push Label 4270107320 GOLD each 21.00 

PB215 1490 LHR/1590 RHR Push Label 4270107322 GOLD each 21.00 

● For Devices shipped before September, 2004. 





21

1490/1590 Series (continued) 

Pushbar 

Model 


Pkg 

Qty 

List 

Price 

18 PB250 1490 Pushbar 36" 4270107027 US28 each 83.00 

1490 Pushbar 36" 4270107028 DC13 each 88.00 


1490 Pushbar 36" 4270107685 US3 each 861.00 



1490 Pushbar 36" 4270107691 US10B each 902.00 
























1590 Pushbar 48" EXT.255 US3 each 875.00 



1590 Pushbar 48" EXT.261 US10B each 917.00 



19 PB270 1490 Channel 36" 4270107034 US28 each 83.00 

1490 Channel 36" 4270107035 DC13 each 88.00 











20 PBX-23 1490 Lockside End Cap Assembly ECAP.111 P35 each 27.00 

21 PBX-24 1490 Hingeside End Cap Assembly ECAP.103 P35 each 31.00 

● PBX-25 1490 Mounting Package PKG.102 US28 each 15.00 

● PBX-25 1490 Mounting Package PKG.104 DC35 each 16.00 

▲ PBX-26 1590 Mounting Package PKG.105 - each 15.00 


For complete pushbar assemblies refer to page 35. 

● PBX-25 includes part numbers 1, 7, 8, 13 and a hex dogging key 

▲ PBX-26 includes part numbers 6, 7, 8, 9, 13 and a hex dogging key 


22 




Exploded View 


1490/1590 Series 

Activating Baseplate Assembly 

1490 

7 5 

7 6 

14 

8 

7 

18 

4 

6 

10 7 14 7 

13 19 12 

3 

17 

9 

11 

16 

7 

13 19 

2 

15 

1590 

1 

14 

8 

7 

18 

10 7 14 7 

13 19 12 

21 

9 

11 

20 

13 19 

15 

15 

See panic hardware price list for retractor selections. 





23

1490/1590 Series 




1 PB124 1590 Latchbolt Assembly 4270107603 - each 90.00 

2 PB216 Lift Lever Axle 4270106769 - each 10.00 

3 PB217 Lift Lever Washer WASHER.102 - 10 14.00 


5 PB139 Link 4270106773 - each 9.00 

6 PB220 Link Washer WASHER.103 - 10 14.00 


8 PB222 Dogging Bracket Assembly 4270107046 - each 51.00 

9 PB223 Dogging Clip 971659-79 - each 9.00 

10 PB224 Compression Spring 4299101020 - each 8.00 

11 Act. Rod Spring Stop CZNC 971660-79 - each 11.50 

12 PB226 Clevis 4270106977 - each 70.00 

13 PB227 8-32 3/8" PPHMS w/Sems SCREW.1136 - 10 27.00 

14 PB228 Clevis Assembly Axle AXLE.1007 - 10 12.50 

15 PB229 10-32 3/8" UFPHMS Screw SCREW.1043 - 10 12.50 

16 PB230 Lift Lever 4270106745 - each 14.00 

17 PB231 Pivot Pin 4270106772 - each 14.00 

18 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 35.00 

19 PB233 #8 Washer Hi-Collar WASHER.107 - 10 10.00 

20 RTR10 1590 Retractor-Sgl Dr 1 3/4" 4270106888 - each 13.00 

RTR11 1590 Retractor-Sgl Dr 2 1/4" 4270107422 - each 13.00 

RTR12 1590 Retractor-Pair w/Mullion 1 3/4" Dr 4270107520 - each 13.00 

RTR13 1590 Retractor-Pair w/Mullion 2 1/4" Dr 4270107521 - each 13.00 

21 PB355 1590 Latchbolt Spring SPRING.127 - 10 12.50 

1490 Base Plate Assemblies 

PBX-50 1490 Baseplate Assembly LHR 36" 4270107061 – each 350.00 

PBX-51 1490 Baseplate Assembly LHR 48" 4270107048 – each 392.00 

PBX-52 1490 Baseplate Assembly RHR 36" 4270107047 – each 350.00 

PBX-53 1490 Baseplate Assembly RHR 48" 4270107060 – each 392.00 

PBX-58 1590 Baseplate Assembly 36" 4270107089 – each 253.00 

PBX-59 1590 Baseplate Assembly 48" 4270107090 – each 295.00 


24 




Exploded View 


EL1490/EL1590 Series 


EL1490 

14 

15 

26 

25 

24 

14 15 

22 

14 

15 

6 

23 

21 

20 

19 

12 

10 

11 

9 8 

5 

18 

17 

3 

4 

EL1590 

10 

12 

13 

14 

16 

13 

7 

5 

8 

1 

9 

11 

3 

4 





25

EL1490/EL1590 Series 


Model 


Pkg 

Qty 

List 

Price 

1 PB125 EL1590 Latchbolt Assembly 36" 4270107623 - each 264.00 

PB125 EL1590 Latchbolt Assembly 48" LATCHR.102 - each 268.00 

2 PB126 S1590 Latchbolt Assembly 4270108763 - each 197.00 

3 PB300 EL Solenoid SOLENOID.142 - each 182.00 

4 PB301 EL Potted Circuit Breaker 110741-00 - each 201.00 

5 PB302 EL Solenoid Plunger PLUNGER.101 - each 53.00 

PB303 EL Cable Assembly (not shown) 110388-00 - each 29.00 

6 PB307 EL1490 Pull Rod 36" 4270107193 - each 29.00 

PB307 EL1490 Pull Rod 48" 4270107361 - each 35.00 

7 PB308 EL1590 Push Rod 36" 4270107342 - each 35.00 

PB308 EL1590 Push Rod 48" 4270107360 - each 43.00 

8 PB52 1/4-20 Hex Nut NUT.103 - 10 5.00 

9 PB310 EL1590 Link 4270107341 - each 6.50 

10 PB311 Subminiature Switch Assembly 36" SWITCH.1002 - each 49.00 

PB311 Subminiature Switch Assembly 48" SWITCH.1004 - each 55.00 

11 PB77 1/4-20 29/32" Soc Shoulder Screw SCREW.1061 BLACK 10 27.00 

PB78 8-32 3/8 PPH w/Sems Machine Screw SCREW.1136 - 10 27.00 

12 PB58 2-56 RHMS Screw SCREW.1063 - 10 6.50 

PB59 8-32 1/4 PPH MS Typ 2A Screw SCREW.1065 - 10 5.00 

13 PB41 Nylon Washer WASHER.113 - 10 8.00 


15 PB220 Link Washer WASHER.103 - 10 14.00 

16 PB177 EL1590 Release Lever Assembly LEVER.103 - each 58.00 

17 PB176 EL1490 Lift Lever Spring-LHR 4270107429 - each 8.00 

PB176 EL1490 Lift Lever Spring-RHR 4270107430 - each 8.00 

18 PB178 EL1490 Lift Lever Sub-Assembly LHR LEVER.104 - each 27.00 

PB178 EL1490 Lift Lever Sub-Assembly RHR LEVER.105 - each 27.00 

19 PB179 EL Lift Lever Spacer 4270107194 - each 11.50 

20 PB135 EL1490 Pivot Bracket 4270107192 - each 8.00 

21 PB136 Lift Lever Washer 4270109142 - each 10.00 

22 PB137 Link Pin 4270107186 - each 7.00 

23 PB138 EL1490 Lift Lever Bracket-LHR 4270107188 - each 8.00 

PB138 EL1490 Lift Lever Bracket-RHR 4270107189 - each 8.00 

24 PB139 1490 Link 4270106773 - each 9.00 

25 PB217 Lift Lever Washer WASHER.102 - 10 14.00 


PB328 Truarc Retaining Ring T5304-18 RRING.112 - 10 10.00 

27 Pivot Pin YZNC STL 4270107363 - 10 23.00 

S1490/S1590 Baseplate Assemblies 

PBX-54 S1490 Baseplate Assembly LHR 36" BASEASY.210 – each 698.00 

PBX-55 S1490 Baseplate Assembly LHR 48" BASEASY.211 – each 739.00 

PBX-56 S1490 Baseplate Assembly RHR 36" BASEASY.208 – each 698.00 

PBX-57 S1490 Baseplate Assembly RHR 48" BASEASY.209 – each 739.00 

PBX-60 S1590 Baseplate Assembly 36" BASEASY.220 – each 599.00 

PBX-61 S1590 Baseplate Assembly 48" BASEASY.221 – each 642.00 

EL1490/EL1590 Baseplate Assemblies 

PBX-62 EL1490 Conversion Kit LHR 36" KIT.1011 – each 791.00 

PBX-63 EL1490 Conversion Kit RHR 36" KIT.1010 – each 791.00 

PBX-64 EL1490 Conversion Kit LHR 48" KIT.1013 – each 791.00 

PBX-65 EL1490 Conversion Kit RHR 48" KIT.1012 – each 791.00 

PBX-66 EL1590 Conversion Kit 36" KIT.1008 – each 791.00 

PBX-67 EL1590 Conversion Kit 48" KIT.1009 – each 791.00 


26 




Exploded View 


1490 Series 

Rod Assembly 

Standard Rod Assembly 

EL Rod Assembly 

13 

13 

2 

2 

10 

10 

8 

3 

8 

3 

1 

1 

5 

5 

1 

4 

1 

4 

5 

5 

9 

3 

9 

3 

14 

14 

11 

12 

6 

2 

7 

2 




2 PB17 10-32 1/4 UFPH Screw SCREW.1028 US32D 10 16.00 

PB17 10-32 1/4 UFPH Screw SCREW.1029 BLACK 10 16.00 

3 PB23 3/8-24 Jam Nut NUT.101 - 10 16.00 

4 PB56 Lift Bracket Assembly 4270106796 - each 46.00 

PB57 EL Lift Bracket Assembly 4270107495 - each 55.00 

5 PB79 Rod Washer WASHER.116 - 10 12.50 

6 PB83 EL Hex Rod Guide Assembly 4270108426 US32D each 35.00 

PB83 EL Hex Rod Guide Assembly GUIDE.101 P35 each 35.00 

7 PB84 EL Hex Bushing BUSH.107 - 10 16.00 

HH Hex Rod Guide Assembly GUIDE.102 P35 each 50.00 

8 PB100 Top Rod 35.000" 4270106776 - each 43.00 

9 PB101 Standard Bottom Rod 31.625" 4270106775 - each 43.00 

PB102 EL Bottom Rod 34.625" 4270109003 - each 50.00 

10 PB128 EL Top Latch 4270105926 - each 111.00 

PB130 SU Top Latch 4270101806 - each 82.00 

11 PB129 RL Bottom Latch 4270100521 - each 70.00 

12 PB133 Hex Bottom Bolt 4270101830 - each 31.00 

13 RA9 1490 Top Rod Assembly 7' Dr RODASY.110 - each 129.00 

RA10 EL1490 Top Rod Assembly 7' Dr 4270109078 - each 157.00 

14 RA11 1490 Bottom Rod Assembly RODASY.112 - each 78.00 

RA12 EL1490 Bottom Rod Assembly 4270109077 - each 85.00 

15 RA13 1490 Top/Btm Rod Assembly 7' Dr 4270106782 - each 253.00 

RA14 EL1490 Top/Btm Rod Assembly 7' Dr 4270107497 - each 281.00 

RA15 1490 Extension Rod Kit over 7' up to 10' Drs 4270107791 - each 92.00 





27

Exploded View 


1490/1590 Series 


1490 1590 

5 6 1 

2 

3 

4 

7 

4 3 2 

1 6 5 

CAM ASSEMBLY 

Hold Back 

Night Latch 



1 PB103 Cylinder Collar 1.00" 4270107213 P28 each 17.00 

PB103 Cylinder Collar 1.00" 4270107214 P13 each 17.00 

PB103 Cylinder Collar 1.00" 4270107215 P35 each 17.00 

PB104 Cylinder Collar 7 Pin 1.25" 4270109005 P28 each 28.00 



2 PB105 Cylinder Tube w/Pin 1 3/4" Dr 4270107286 – each 30.00 

PB105 Cylinder Tube w/Pin 2" Dr 4270107833 – each 49.00 

PB105 Cylinder Tube w/Pin 2 1/4" Dr 4270107787 – each 49.00 

PB106 Cylinder Tube w/Pin 7 Pin 1 3/4" Dr 4270109009 – each 49.00 

PB106 Cylinder Tube w/Pin 7 Pin 2" Dr 4270109190 – each 49.00 

HH Cylinder Tube w/Pin 1 3/4" Dr 4270109630 – each 36.00 

HH Cylinder Tube w/Pin 7 Pin 1 3/4" Dr CTUBE.232 – each 55.00 

3 PB115 1490 NL Cam Assembly 4270107268 – each 24.00 

PB116 1490 HB Cam Assembly 4270107270 – each 24.00 

PB117 1590 NL Cam Assembly 4270107283 – each 24.00 

PB118 1590 HB Cam Assembly 4270107285 – each 24.00 

4 PB120 Cylinder Adaptor Washer WASHER.108 – 10 11.50 

5 PB121 Cylinder Lock Washer WASHER.109 CZNC 10 14.00 

PB121 Cylinder Lock Washer WASHER.110 BLACK 10 14.00 

6 PB122 Cylinder Collar Spring SPRING.105 – 10 8.00 

7 PB206 12-24 1 1/2" UFPHMS Screw SCREW.1105 CZNC 10 17.00 

PB206 12-24 1 1/2" UFPHMS Screw SCREW.1099 BLACK 10 17.00 


28 




Exploded View 


1690 Series 

Exploded View and Parts List 

15 

13 

19 

30 

29 

1 

14 

17 

18 

24 

6 

36 

2 

3 

25 

11 

8 

7 

9 

5 

4 

10 

21 

22 20 

26 

28 

31 

24 

23 

12 

1 

27 

1 

32 

33 

34 

1690 Series 





2 PB3 Bearing Bushing BUSH.109 - 10 18.00 


4 PB114 Lock Stile Mounting Screw SCREW.1069 - 10 10.00 

5 PB127 Lift Bracket BRKT.138 - each 16.00 

6 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 35.00 

PBX-27 Auxiliary Package (part 1-6) PKG.150 US28 each 18.00 

PBX-27 Auxiliary Package (part 1-6) PKG.151 DC13/DC35 each 18.00 

7 PB10 Cylinder Bushing BUSH.102 - 10 18.00 

8 PB5 Pinion Cam CAM.102 - 10 102.00 

PB140 Pinion Cam 4270903177 - each 14.00 

9 PB35 Rod Retractor RETRACT.101 - 10 41.00 

10 PB141 Retainer Screw SCREW.1074 - 10 14.00 

11 PB312 Pinion Support Bracket BRKT.478 - each 7.00 

12 PB313 Center Case Cover Kit COVER.113 - each 30.00 

13 PB314 Channel/Hinge End Cap Kit ECAP.130 - each 19.00 





29

Exploded View 


1690 Series (continued) 

Model 


Pkg 

Qty 

List 

Price 

14 PB315 1/4-20 1/2" PPHMS Screw SCREW.1070 – 10 9.00 

15 ★ PB316 #8 1.1/2" FPH TC Typ AB Screw SCREW.1072 – 10 9.00 

PB316 8-18 1.14" FPH TF Typ 25 SCREW.1143 – 10 16.00 

16 PB317 1/4-20 3/8" Hex Soc Set Screw SCREW.1067 BLACK 3 10.00 

PB317 1/4-20 3/8" Hex Soc Set Screw SCREW.1068 US28 3 10.00 

17 PBX-16 Dogging Kit KIT.1197 – each 24.00 

18 PB322 Push Bar Pin PIN.128 – 10 9.00 

19 PB323 Dogging Spring 971493-76 – each 5.00 

20 PB338 Actuator Arm Bracket Assy BRKTASY.107 – each 12.50 

21 PB318 Lock Stile Push Bar End Cap ECAP.129 P35 each 12.50 

22 ★ PB345 8-3/4" FPHSMS SCREW.1077 BLACK 10 16.00 

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 – 10 12.50 

23 ▲ PB324 8-5/8" FPHSMS SCREW.1025 BLACK 10 14.00 


25 ■ PB24 SU/PL/ES/RL Rod 4270100017 – each 26.00 

PB24 SU/PL/ES/RL Rod-1/4" Insulclad 7' 4270102427 – each 26.00 

PB24 SU/PL/ES/RL Rod-1/4" Insulclad 8' 4270102426 – each 81.00 

SU Rod 8' Door 4270100018 – each 81.00 

SU Ext Rod Kit Up to 9' Dr (not shown) 4270100172 – each 72.00 

SU Ext Rod Kit Up to 10' Dr (not shown) 4270100197 – each 83.00 

26 PB25 Hex Bottom Rod 4270101825 – each 26.00 

27 PB54 Latch Mtg Bracket Kit-HMD BRKTASY.101 – each 36.00 

28 ● PB129 RL Bottom Latch 4270100521 – each 70.00 

29 ● PB130 SU Top Latch 4270101806 – each 82.00 

30 ● PB131 ES Top Latch 4270100346 – each 96.00 

31 ● PB132 PL Bottom Latch 4270101482 – each 70.00 

32 PB352 Hex Bottom Bolt Beveled BOLT.1004 – each 35.00 






SU/ES/PL/HH Latch Spirol Pin PIN.109 – 10 13.00 

34 SR33 10-32 3/8" FPHMS SCREW.1037 – 25 14.00 





● RA5 ES Top Rod Assembly 7' Dr 4270101873 – each 139.00 

ES Top Rod Assembly 8' Dr 4270101874 – each 211.00 

● RA6 RL Bottom Rod Assembly 4270100522 – each 111.00 

RA17 Hex Bottom Rod Assembly RODASY.1075 – each 79.00 

● RA8 PL Bottom Rod Assembly 4270100266 – each 113.00 

36 PB321 Pushbar Anchor Bracket BRKT.128 – each 7.00 


■ Standard SU Top Rod or Standard PL, ES or RL Bottom Rod. 

● Specify if door material other than aluminum. Complete rod and latch assembly includes PB24 standard rod and PB23 nut. 

Part numbers shown are for standard centerlines and assembled lengths. 

★ For devices shipped before September, 2004. 

▲ For covers shipped before July 2006. 


30 




1690 Series (continued) 

✹ 

Model 


Pkg 

Qty 

List 

Price 

PB123 NL Cylinder Assy & Auxiliary Parts (parts 1-10) KIT.1156 US28 each 45.00 

PB123 NL Cylinder Assy & Auxiliary Parts (parts 1-10) KIT.1157 DC13/DC35 each 45.00 

169CA 1690NL Cylinder Assembly (parts 7-10) CYLASY.1083 – each 27.00 

PB18 10-32 3/8" UFPH TF SCREW.1121 US28 8 7.50 

PB18 10-32 3/8" UFPH TF SCREW.1114 DC13/DC35 8 7.50 

PB19 Center Case Bracket BRKT.156 – each 12.00 

Hex Dogging Shaft SHAFT.101 – each 4.50 

PB328 Truarc Retaining Ring T5304-18 RRING.112 – 10 10.00 

PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 162.00 

PB301 EL Potted Circuit Breaker (not shown) 110741-00 – each 201.00 

PB300 EL Solenoid 24 VDC (not shown) 971687-00 – each 182.00 

PB302 EL Plunger (not shown) PLUNGER.101 – each 53.00 

PB303 EL Cable Assembly (not shown) 110388-00 – each 29.00 

1690/1790 Pushbars and Channels Standard EL 

PBX-38 1690/1790 Pushbar 30" EXT.827 EXT.830 US28 each 78.00 

1690/1790 Pushbar 30" EXT.828 EXT.825 DC13 each 90.00 


1690/1790 Pushbar 30" EXT.2351 EXT.2323 US3 each 211.00 



1690/1790 Pushbar 30" EXT.2354 EXT.2340 US26D each 190.00 























✹ RX Switch Kit valid for Field Install RX Option on Devices shipped after June, 2002. 





31

Exploded View 


1790 Series 


1 

5 

10 

11 

9 

4 

3 

23 16 

8 

21 20 19 18 

17 

22 

6 

13 

14 

15 

12 

2 


32 




1790 Series 

Model 


Pkg 

Qty 

List 

Price 

1 PB314 Channel/Hingeside End Cap Kit ECAP.130 – each 19.00 

2 PB329 Center Case Cover Kit COVER.120 – each 30.00 

3 PB232 Hex Dogging Key 5/32" KEY.10020 – 10 35.00 


5 ■ PB316 #8 1.1/2" FPH TC Typ AB Screw SCREW.1072 – 10 9.00 

PB316 8-18 1.1/4" FPH TF Typ 25 SCREW.1143 – 10 16.00 


PB18 10-32 3/8" UFPH TF SCREW.1121 US28 8 7.50 

7 PBX-18 Auxiliary Package PKG.133 – each 8.00 

8 PB325 Latch Assembly LBOLT.105 – each 43.00 

✹ PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 162.00 


PB300 EL Solenoid 24VDC (not shown) 971687-00 – each 182.00 



9 PB322 Pushbar Pin PIN.128 – 10 9.00 


Hex Dogging Shaft SHAFT.101 – each 4.50 


12 ▲ PB324 8 x 5/8 FPHTC Typ 25 SCREW.1025 – 10 14.00 

13 PB318 Lock Stile End Cap ECAP.129 DC35 each 12.50 

14 ■ PB345 8-3/4" FPHSMS SCREW.1077 BLACK 10 16.00 


15 PB320 Latch Pin 969467-89 – each 8.00 

16 PB328 Truarc Retaining Ring T5304-18 RRING.112 – 10 10.00 

17 PB331 Short Arm Allen Wrench 4270109548 – each 5.00 

PB327 10-32 3/8" UFPH MS SCREW.1150 – 10 15.00 

19 PB326 1790 Channel Spacer SPACER.107 – each 12.50 

20 PB319 Drive Bushing CAMASY.101 – each 36.00 

21 PB344 Slider SLIDER.101 – each 6.00 

22 179CA 1790 NL/HB Cylinder Assembly CYLASY.1151 – each 27.00 


1790 Pushbars and Channels on page 31 


✹ RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002 

■ For Devices shipped before September, 2004. 

▲ For Devices shipped before July, 2006. 





33

Exploded View 


2390 Series 


21 

8 

7 

10 

1 

15 

20 

7 

11 

17 

24 

12 

9 

27 

26 12 

3 

16 

8 

4 

13 6 

25 

8 

9 

6 

7 

5 

4 

3 

2 

22 

15 1 15 

23 

10 

11 

11 

19 

18 


34 




2390 Series 




2 PB334 Lift Lever Axle AXLE.1006 – each 5.00 


4 PB336 Lift Bracket BRKT.143 – each 11.50 

5 PB338 Actuator Arm Bracket Assembly BRKTASY.107 – each 12.50 

6 PB3 Bearing Bushing BUSH.109 – 10 18.00 

7 PB341 Fixed Cover COVER.127 – each 25.00 

8 PB342 Moving Pushbar End Cap ECAP.143 – each 10.00 

9 PB232 Hex Dogging Key 5/32" KEY.10020 – 10 35.00 



12 PB322 Pushbar Pin PIN.128 – 10 9.00 

PBX-28 Mounting Package (parts 4,6,9,13,15) PKG.134 US32D each 18.00 

PBX-28 Mounting Package (parts 4,6,9,13,15) PKG.135 DC35 each 18.00 

13 PB4 Retaining Ring .250 RRING.109 – 25 14.00 



16 ★ PB345 #8 3/4" FPH TF AB Screw SCREW.1077 – 10 16.00 


17 PB350 12-14 1/2" UFPH MS Typ 25 Screw SCREW.1088 – 10 12.50 

10-32 3/8" UFPH TF SCREW.1121 US28 8 7.50 

10-32 3/8" UFPH TF SCREW.1114 DC13/DC35 8 7.50 



RA16 Extension Rod Kit (not shown) EXTROD.1001 each 113.00 



19 PB352 Hex Bottom Bolt-Beveled BOLT.1004 – each 35.00 

20 PB130 SU Top Latch 4270101806 – each 82.00 

21 PB131 ES Top Latch 4270100346 – each 96.00 

22 PB129 RL Bottom Latch 4270100521 – each 70.00 

23 PB132 PL Bottom Latch 4270101482 – each 70.00 


SU/ES/PL/HH Latch Spirol Pin PIN,109 – 10 13.00 

✹ PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 162.00 



PB300 EL Solenoid 24VDC (not shown) 971687-00 – each 182.00 


24 PB357 Top Rod 34.00", CL=42.5,DH=83 3/16 ROD.1043 – each 26.00 

PB358 Top Rod 35.500", CL=41.25,DH=83 3/16 4270103324 – each 26.00 

PB359 Top Rod 39.000", CL=37.875,DH=83 3/16 ROD.1082 – each 26.00 

PB360 Top Rod 36.500", CL=40,DH=83 3/16 ROD.1036 – each 26.00 

25 PB361 Bottom Rod 40.000", CL=42 1/2 ROD.1080 – each 26.00 

PB362 Bottom Rod 38.500", CL=41 1/4 ROD.1044 – each 26.00 

PB24 Bottom Rod 35.125", CL=37 7/8 4270100017 – each 26.00 

PB363 Bottom Rod 37.500", CL=40 ROD.1011 – each 26.00 

PB365 2390 LBR Kit KIT.1128 – each 11.50 


✹ RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002 

★ For Devices shipped before September, 2004. 





35

2390 Series 

Model 


List 

Price 

26 PBX-30 Pushbar 21" EXT.3000 US28 113.00 

Pushbar 21" EXT.3001 DC13 123.00 

Pushbar 21" EXT.3002 DC35 123.00 

Pushbar 21" EXT.3003 Champagne 123.00 

PBX-31 Pushbar 24" EXT.3004 US28 133.00 

Pushbar 24" EXT.3005 DC13 146.00 

Pushbar 24" EXT.3006 DC35 146.00 

Pushbar 24" EXT.3007 Champagne 146.00 

27 PBX-32 Coverplate 21" EXT.3008 US28 43.00 

Coverplate 21" EXT.3009 DC13 51.00 


Coverplate 21" EXT.3011 Champagne 51.00 

PBX-33 Coverplate 24" EXT.3012 US28 49.00 



Coverplate 24" EXT.3015 Champagne 58.00 

PBX-34 EL Coverplate 21" EXT.3050 US28 43.00 

EL Coverplate 21" EXT.3051 DC13 51.00 


EL Coverplate 21" EXT.3053 Champagne 51.00 

PBX-35 EL Coverplate 24" EXT.3054 US28 49.00 



EL Coverplate 24" EXT.3057 Champagne 58.00 

■ PBX-9 Channel Assembly 42" Door CHASY.147 US28 73.00 

■ Channel Assembly 42" Door CHASY.160 DC13 90.00 


■ Channel Assembly 42" Door CHASY.158 Champagne 119.00 

■ PBX-10 Channel Assembly 48" Door CHASY.108 US28 84.00 



■ Channel Assembly 48" Door CHASY.207 Champagne 121.00 

■ PBX-36 Filler Plate 16.50, 42" Door EXT.2927 US28 23.00 

■ Filler Plate 16.50, 42" Door EXT.2949 DC13 25.00 


■ Filler Plate 16.50, 42" Door EXT.2951 Champagne 25.00 

■ PBX-15 Filler Plate 19.50, 48" Door EXT.440 US28 24.00 



■ Filler Plate 19.50, 48" Door EXT.2244 Champagne 26.00 

● RA-18 Top Rod Assy RHR AL=40.176 CL=42.5 DH=83 3/16" RODASY.10001 – 111.00 



● RA-21 Top Rod Assy RHR AL=42.676 CL=40 DH=83 3/16" RODASY.10004 – 111.00 


● RA-23 Top Rod Assy LHR AL=40.176 CL=42.5 DH=83 3/16" RODASY.10006 – 111.00 



● RA-26 Top Rod Assy LHR AL=42.676 CL=40 DH=83 3/16" RODASY.10009 – 111.00 


● RA-28 Bottom Rod Assy AL=41.877 CL=42.5 RODASY.10011 – 58.00 



● RA-31 Bottom Rod Assy AL=39.377 CL=40 RODASY.10014 – 58.00 


■ Channel assembly and Filler Plate sizes supplied for field sizing. 

● Complete rod and latch assembly includes PB24 standard rod and PB23 nut. 


36 




12 

Exploded View 9 


2390 Series 


2390 

27 

26 12 

3 

16 

8 

4 

13 6 

25 

8 

9 

6 

7 

5 

4 

3 

2 

1 

11 

10 

11 

19 

Model Pkg 18 List 


1 PB343 2390 Cylinder Housing HOUSING.123 P28 each 63.00 

PB343 2390 Cylinder Housing HOUSING.124 P13 each 63.00 

PB343 2390 Cylinder Housing HOUSING.125 P35 each 63.00 

2 PB332 Mortise Locking Collar 971974-00 – each 9.50 

3 PB339 2390 NL/HB Bracket Assembly BRKTASY.118 – each 31.00 

4 PB333 Mounting Stud 971585-89 – each 8.00 

5 PB351 #10 Countersunk Washer WASHER.120 DC35 10 10.00 

5 PB351 #10 Countersunk Washer WASHER.121 US32D 10 10.00 

6 PB347 10-24 x 1" OPHMS SCREW.1083 US32D 10 11.50 

7 PB346 1/4-20 x 3/8 SHCS SCREW.1082 – 10 11.50 

8 PB337 2390 Rod Lift Bracket BRKT.152 – each 16.00 

9 PB348 1/4-28 x 3/4 SHCS SCREW.1084 – 10 12.50 

10 PB340 Lift Bracket Kit - 2" Door BRKTASY.155 – each 34.00 

11 PB349 8-18 x 5/16 UFPHSMS AB Screw SCREW.1085 – each 11.50 

Strike/Mullion/Trim 

Strike 



PB49 PB48 Strike Shim SHIM.112 – 10 18.00 

PB33 Screw 8-32 X 1/2" UFPHMS SCREW.1038 BLACK 25 11.50 

PB33 Screw 8-32 X 1/2" UFPHMS SCREW.1032 US32D 25 11.50 

PB50 TD35 Strike Shim SHIM.150 BLACK each 19.00 

PB51 TD35 Screw 10-32 x 1" FPHMS SCREW.1016 BLACK 25 16.00 

PB91 TD35 Wear Strip 4270109590 – each 9.00 

PB92 TD35 Drive Rivet RIVET.101 – 25 24.00 

Mullion 

MB10 RM170 Mullion Bracket Pkg 4270108954 – each 73.00 

MB11 RM150 Mullion Bracket Pkg 4270107489 – each 70.00 

Trim 

PB97 9970 Mounting Stud STUD.102 – 10 23.00 





37


38 




INDEX by Model Number 

Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page 

169CA . . . . .31 

179CA . . . . .33 

DC1 . . . . . .15 

DC15 . . . . .15, 19 

DC16 . . . . .19 

DC40 . . . . .15, 19 

DC41 . . . . .19 

DCX-1 . . . . .20 

DCX-2 . . . . .15, 19 

MB10 . . . . .37 

MB11 . . . . .387 

PB2 . . . . . . .13, 18 

PB3 . . . . . . .13, 29, 35 

PB4 . . . . . . .13, 29, 35 

PB5 . . . . . . .13, 18, 29 

PB10 . . . . . .13, 18, 29 

PB12 . . . . . .13, 18 

PB13 . . . . . .13, 18 

PB14 . . . . . .13, 18 

PB15 . . . . . .13, 18 

PB17 . . . . . .13, 21, 

27, 29, 35 

PB18 . . . . . .31, 33 

PB19 . . . . . .31 

PB20 . . . . . .16 

PB23 . . . . . .14, 27, 

30, 35 

PB24 . . . . . .14, 30, 35 

PB25 . . . . . .14, 30 

PB30 . . . . . .14, 18 

PB33 . . . . . . 37 

PB35 . . . . . .14, 29 

PB38 . . . . . .14, 18 

PB39 . . . . . .15, 20 

PB41 . . . . . .26 

PB42 . . . . . .18 

PB49 . . . . . .38 

PB50 . . . . . .38 

PB51 . . . . . .38 

PB52 . . . . . .26 

PB53 . . . . . .18, 27 

PB54 . . . . . .14, 30 

PB56 . . . . . .27 

PB57 . . . . . .27 

PB58 . . . . . .26 

PB59 . . . . . .26 

PB61 . . . . . .18 

PB62 . . . . . .18 

PB63 . . . . . .18 

PB64 . . . . . .18 

PB77 . . . . . .26 

PB78 . . . . . .26 

PB79 . . . . . .27 

PB81 . . . . . .18 

PB83 . . . . . .27 

PB84 . . . . . .27 

PB88 . . . . . .14 

PB89 . . . . . .18 

PB91 . . . . . .37 

PB92 . . . . . .37 

PB97 . . . . . .37 

PB99 . . . . . .14, 18 

PB101 . . . . .27 

PB102 . . . . .27 

PB103 . . . . .28 

PB104 . . . . .28 

PB105 . . . . .28 

PB106 . . . . .28 

PB107 . . . . .28 

PB108 . . . . .28 

PB114 . . . . .29 

PB115 . . . . .28 

PB116 . . . . .28 

PB117 . . . . .28 

PB118 . . . . .28 

PB120 . . . . .28 

PB121 . . . . .28 

PB122 . . . . .28 

PB123 . . . . .31 

PB124 . . . . .24 

PB125 . . . . .26 

PB126 . . . . .26 

PB127 . . . . .29 

PB128 . . . . .27 

PB129 . . . . .14, 27, 

30, 35 

PB130 . . . . .14, 27, 

30, 35 

PB131 . . . . .14, 30, 35 

PB132 . . . . .14, 30, 35 

PB133 . . . . .14, 27 

PB134 . . . . .14, 30, 35 

PB135 . . . . .26 

PB136 . . . . .26 

PB137 . . . . .26 

PB138 . . . . .26 

PB139 . . . . .24, 26 

PB140 . . . . .13, 18, 29 

PB141 . . . . .29 

PB176 . . . . .26 

PB177 . . . . .26 

PB178 . . . . .26 

PB179 . . . . .26 

PB200 . . . . .21 

PB201 . . . . .21 

PB202 . . . . .21 

PB203 . . . . .21 

PB204 . . . . .21 

PB205 . . . . .21 

PB206 . . . . .21, 28 

PB207 . . . . .21 

PB208 . . . . .21 

PB210 . . . . .21 

PB211 . . . . .21 

PB212 . . . . .21 

PB213 . . . . .21 

PB214 . . . . .21 

PB215 . . . . .21 

PB216 . . . . .24 

PB217 . . . . .24, 26 

PB218 . . . . .24, 26 

PB219 . . . . .21 

PB220 . . . . .24, 26 

PB221 . . . . .24, 26 

PB222 . . . . .24 

PB223 . . . . .24 

PB224 . . . . .24 

PB226 . . . . .24 

PB227 . . . . .24 

PB228 . . . . .24 

PB229 . . . . .24 

PB230 . . . . .24 

PB231 . . . . .24 

PB232 . . . . .24, 29, 

33, 35 

PB233 . . . . .24 

PB250 . . . . .22 

PB251 . . . . .22 

PB260 . . . . .22 

PB261 . . . . .22 

PB270 . . . . .22 

PB271 . . . . .22 

PB280 . . . . .22 

PB281 . . . . .22 

PB300 . . . . .26, 31, 

33, 35 

PB301 . . . . .26, 31, 

33, 35 

PB302 . . . . .26, 31, 

33, 35 

PB303 . . . . .26, 31, 

33, 35 

PB307 . . . . .26 

PB308 . . . . .26 

PB310 . . . . .26 

PB311 . . . . .26 

PB312 . . . . .29 

PB313 . . . . .29 

PB314 . . . . .29, 33 

PB315 . . . . .30, 33 

PB316 . . . . .30, 33 

PB317 . . . . .30 

PB318 . . . . .30, 33 

PB319 . . . . .33 

PB320 . . . . .33 

PB321 . . . . .30, 33 

PB322 . . . . .30, 33, 35 

PB323 . . . . .30, 33, 35 

PB324 . . . . .30, 33 

PB325 . . . . .33 

PB326 . . . . .33 

PB327 . . . . .33 

PB328 . . . . .26, 31, 33 

PB329 . . . . .33 

PB330 . . . . .33 

PB331 . . . . .33 

PB332 . . . . .37 

PB333 . . . . .37 

PB334 . . . . .35 

PB335 . . . . .35 

PB336 . . . . .35 

PB337 . . . . .37 

PB338 . . . . .30, 35 

PB339 . . . . .37 

PB340 . . . . .37 

PB341 . . . . .35 

PB342 . . . . .35 

PB343 . . . . .37 

PB344 . . . . .34 

PB345 . . . . .30, 34, 35 

PB346 . . . . .37 

PB347 . . . . .37 

PB348 . . . . .37 

PB349 . . . . .37 

PB350 . . . . .35 

PB351 . . . . .37 

PB352 . . . . .30, 35 

PB353 . . . . .31, 33, 35 

PB355 . . . . .24 

PB357 . . . . .35 

PB358 . . . . .35 

PB359 . . . . .35 

PB360 . . . . .35 

PB361 . . . . .35 

PB362 . . . . .35 

PB363 . . . . .35 

PB365 . . . . .35 

PBX-1 . . . . .15, 19 

PBX-9 . . . . .36 

PBX-10 . . . .36 

PBX-15 . . . .36 

PBX-16 . . . .30, 33, 35 

PBX-18 . . . .33 

PBX-23 . . . .22 

PBX-24 . . . .22 

PBX-25 . . . .22 

PBX-26 . . . .22 

PBX-27 . . . .29 

PBX-28 . . . .35 

PBX-30 . . . .36 

PBX-31 . . . .36 

PBX-32 . . . .36 

PBX-33 . . . .36 

PBX-34 . . . .36 

PBX-35 . . . .36 

PBX-36 . . . .36 

PBX-38 . . . .31 

PBX-39 . . . .31 

PBX-40 . . . .31 

PBX-41 . . . .31 

PBX-50 . . . .24 

PBX-51 . . . .24 

PBX-52 . . . .24 

PBX-53 . . . .24 

PBX-54 . . . .26 

PBX-55 . . . .26 

PBX-56 . . . .26 

PBX-57 . . . .26 

PBX-58 . . . .24 

PBX-59 . . . .24 

PBX-60 . . . .26 

PBX-61 . . . .26 

PBX-62 . . . .26 

PBX-63 . . . .26 

PBX-64 . . . .26 

PBX-65 . . . .26 

PBX-66 . . . .26 

PBX-67 . . . .26 

RA1 . . . . . . .14, 30 

RA2 . . . . . . .14, 30 

RA3 . . . . . . .14, 30 

RA4 . . . . . . .14, 30 

RA5 . . . . . . .14, 30 

RA6 . . . . . . .14, 30 

RA7 . . . . . . .14 

RA8 . . . . . . .14, 30 

RA9 . . . . . . .27 

RA10 . . . . . .27 

RA11 . . . . . .27 

RA12 . . . . . .27 

RA13 . . . . . .27 

RA14 . . . . . .27 

RA15 . . . . . .27 

RA16 . . . . . .35 

RA17 . . . . . .30 

RA18 . . . . . .36 

RA19 . . . . . .36 

RA20 . . . . . .36 

RA21 . . . . . .36 

RA22 . . . . . .36 

RA23 . . . . . .36 

RA24 . . . . . .36 

RA25 . . . . . .36 

RA26 . . . . . .36 

RA27 . . . . . .36 

RA28 . . . . . .36 

RA29 . . . . . .36 

RA30 . . . . . .36 

RA31 . . . . . .36 

RD9 . . . . . . .14, 18 

RD10 . . . . . .14, 18 

RDX-1 . . . . .20 

RTR10 . . . . .24 

RTR11 . . . . .24 

RTR12 . . . . .24 

RTR13 . . . . .24 

SD1 . . . . . . .15 

SD15 . . . . . .15, 19 

SD16 . . . . . .19 

SD40 . . . . . .15, 19 

SD41 . . . . . .19 

SD43 . . . . . .14, 18 

SD45 . . . . . .14 

SD9 . . . . . . .14, 18 

SR33 . . . . . .14, 30 





39

INDEX by Part Number 

Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 

110388-00 . . . . . .26, 31, 

33, 35 

110741-00 . . . . . .26, 31, 

33, 35 

4230100017 . . . .16 

4270100013 . . . .14, 16 

4270100017 . . . .14, 30, 

35 

4270100018 . . . .14, 30 

4270100026 . . . .16 

4270100075 . . . .16 

4270100108 . . . .16 

4270100110 . . . .16 

4270100116 . . . .16 

4270100130 . . . .16 

4270100151 . . . .16 

4270100152 . . . .16 

4270100153 . . . .16 

4270100172 . . . .14, 30 

4270100197 . . . .14, 30 

4270100218 . . . .16 

4270100266 . . . .14, 30 

4270100299 . . . .16 

4270100304 . . . .18 

4270100312 . . . .14, 18 

4270100346 . . . .14, 30, 

35 

4270100521 . . . .14, 27, 

30, 35 

4270100522 . . . .14, 30 

4270100582 . . . .16 

4270100663 . . . .16 

4270101482 . . . .14, 30, 

35 

4270101753 . . . .16 

4270101778 . . . .16 

4270101806 . . . .14, 27, 

30, 35 

4270101818 . . . .14, 30 

4270101819 . . . .14, 30 

4270101825 . . . .14, 30 

4270101830 . . . .14, 27 

4270101831 . . . .14 

4270101840 . . . .18 

4270101873 . . . .14, 30 

4270101874 . . . .14, 30 

4270102426 . . . .14, 30 

4270102427 . . . .14, 30 

4270103324 . . . .35 

4270105926 . . . .27 

4270106026 . . . .16 

4270106632 . . . .14, 30 

4270106633 . . . .14, 30 

4270106745 . . . .24 

4270106769 . . . .24 

4270106770 . . . .21 

4270106772 . . . .24 

4270106773 . . . .24, 26 

4270106775 . . . .27 

4270106776 . . . .27 

4270106782 . . . .27 

4270106786 . . . .21 

4270106787 . . . .21 

4270106796 . . . .27 

4270106863 . . . .21 

4270106875 . . . .21 

4270106888 . . . .24 

4270106977 . . . .24 

4270106997 . . . .16 

4270107027 . . . .22 

4270107028 . . . .22 

4270107029 . . . .22 

4270107031 . . . .22 

4270107032 . . . .22 

4270107033 . . . .22 

4270107034 . . . .22 

4270107035 . . . .22 

4270107036 . . . .22 

4270107038 . . . .22 

4270107039 . . . .22 

4270107040 . . . .22 

4270107046 . . . .24 

4270107047 . . . .24 

4270107048 . . . .24 

4270107060 . . . .24 

4270107061 . . . .24 

4270107089 . . . .24 

4270107090 . . . .24 

4270707091 . . . .22 

4270107092 . . . .22 

4270107093 . . . .22 

4270107095 . . . .22 

4270107096 . . . .22 

4270107097 . . . .22 

4270107176 . . . .14, 30, 

35 

4270107178 . . . .14, 30, 

35 

4270107186 . . . .26 

4270107188 . . . .26 

4270107189 . . . .26 

4270107192 . . . .26 

4270107193 . . . .26 

4270107194 . . . .26 

4270107213 . . . .28 

4270107214 . . . .28 

4270107215 . . . .28 

4270107268 . . . .28 

4270107270 . . . .28 

4270107283 . . . .28 

4270107285 . . . .28 

4270107286 . . . .28 

4270107320 . . . .21 

4270107321 . . . .21 

4270107322 . . . .21 

4270107323 . . . .21 

4270107341 . . . .26 

4270107342 . . . .26 

4270107360 . . . .26 

4270107361 . . . .26 

4270107363 . . . .26 

4270107422 . . . .24 

4270107429 . . . .26 

4270107430 . . . .26 

4270107489 . . . .38 

4270107495 . . . .27 

4270107497 . . . .27 

4270107520 . . . .24 

4270107521 . . . .24 

4270107587 . . . .22 

4270107588 . . . .22 

4270107589 . . . .22 

4270107591 . . . .22 

4270107592 . . . .22 

4270107593 . . . .22 

4270107603 . . . .24 

4270107623 . . . .26 

4270107685 . . . .22 

4270107686 . . . .22 

4270107687 . . . .22 

4270107688 . . . .22 

4270107689 . . . .22 

4270107691 . . . .22 

4270107703 . . . .22 

4270107704 . . . .22 

4270107705 . . . .22 

4270107706 . . . .22 

4270107707 . . . .22 

4270107709 . . . .22 

4270107712 . . . .22 

4270107713 . . . .22 

4270107714 . . . .22 

4270107715 . . . .22 

4270107716 . . . .22 

4270107718 . . . .22 

4270107787 . . . .28 

4270107791 . . . .27 

4270107833 . . . .28 

4270108348 . . . .16 

4270108426 . . . .27 

4270108763 . . . .26 

4270108954 . . . .37 

4270109003 . . . .27 

4270109005 . . . .28 

4270109006 . . . .28 

4270109007 . . . .28 

4270109009 . . . .28 

4270109077 . . . .27 

4270109078 . . . .27 

4270109142 . . . .26 

4270109190 . . . .28 

4270109548 . . . .33 

4270109590 . . . .37 

4270109630 . . . .28 

4270900091 . . . .15, 20 

4270900094 . . . .15, 20 

4270900095 . . . .15, 20 

4270900097 . . . .15, 20 

4270900098 . . . .15, 20 

4270902091 . . . .16 

4270902095 . . . .16 

4270902121 . . . .16 

4270902125 . . . .16 

4270902740 . . . .20 

4270902742 . . . .20 

4270902743 . . . .20 

4270902746 . . . .20 

4270902748 . . . .20 

4270902749 . . . .20 

4270902763 . . . .19 

4270902766 . . . .19 

4270902767 . . . .19 

4270902769 . . . .19 

4270902772 . . . .19 

4270902773 . . . .19 

4270902776 . . . .15, 19 

4270902778 . . . .15, 19 

4270902779 . . . .15, 19 

4270902782 . . . .15, 19 

4270902784 . . . .15, 19 

4270902785 . . . .15, 19 

4270902787 . . . .15 

4270902789 . . . .15 

4270902790 . . . .15 

4270902799 . . . .15, 19 

4270902802 . . . .15, 19 

4270902803 . . . .15, 19 

4270902805 . . . .15, 19 

4270902808 . . . .15, 19 

4270902809 . . . .15, 19 

4270902968 . . . .18 

4270902974 . . . .18 

4270903177 . . . .13, 16, 

18, 29 

4299100213 . . . .16 

4299100961 . . . .16 

4299100997 . . . .16 

4299101020 . . . .24 

969467-89 . . . . . .33 

971493-76 . . . . . .30, 33, 

35 

971585-89 . . . . . .37 

971659-79 . . . . . .24 

971660-79 . . . . . .24 

971687-00 . . . . . .31, 33, 

35 

971974-00 . . . . . .37 

AXLE.1006 . . . . . .35 

AXLE.1007 . . . . . .24 

BASEASY.208 . . .26 

BASEASY.209 . . .26 

BASEASY.210 . . .26 

BASEASY.211 . . .26 

BASEASY.220 . . .26 

BASEASY.221 . . .26 

BOLT.1004 . . . . . .30, 35 

BRKT.128 . . . . . .30, 33 

BRKT.137 . . . . . .35 

BRKT.138 . . . . . .29 

BRKT.143 . . . . . .35 

BRKT.152 . . . . . .37 

BRKT.156 . . . . . .31 

BRKT.478 . . . . . .29 

BRKTASY.101 . . .14, 30 

BRKTASY.107 . . .30, 35 

BRKTASY.118 . . .37 

BRKTASY.155 . . .37 

BUMPER.103 . . .21 

BUSH.102 . . . . . .13, 16, 

18, 29 

BUSH.103 . . . . . .14, 16, 

18 

BUSH.107 . . . . . .27 

BUSH.108 . . . . . .16 

BUSH.109 . . . . . .13, 16, 

29, 35 

CAM.102 . . . . . . .13, 16, 

18, 29 

CAMASY.101 . . . .33 

CASE.209 . . . . . .15, 19 

CASE.210 . . . . . .15, 19 

CASE.211 . . . . . .20 

CASE.213 . . . . . .15, 19 

CASE.214 . . . . . .15, 19 

CASE.215 . . . . . .15, 19 

CASE.216 . . . . . .15, 19 

CASE.217 . . . . . .15, 19 

CASE.218 . . . . . .15, 19 

CASE.220 . . . . . .15, 19 

CASE.221 . . . . . .15, 19 

CASE.222 . . . . . .15, 19 

CASE.223 . . . . . .15, 19 

CASE.224 . . . . . .20 

CASE.225 . . . . . .20 

CASE.226 . . . . . .20 

CASE.228 . . . . . .20 

CASE.229 . . . . . .20 

CASE.230 . . . . . .15, 19 

CASE.231 . . . . . .15, 19 

CASE.232 . . . . . .15, 19 

CASE.233 . . . . . .15, 19 

CASE.234 . . . . . .20 

CASE.235 . . . . . .20 

CASE.236 . . . . . .20 

CASE.237 . . . . . .20 

CASE.238 . . . . . .20 

CASE.239 . . . . . .20 

CASE.240 . . . . . .20 

CASE.241 . . . . . .20 

CASE.242 . . . . . .20 

CASE.243 . . . . . .20 

CBAR.101 . . . . . .15, 20 

CBAR.102 . . . . . .15, 20 

CBAR.116 . . . . . .15, 20 

CBAR.120 . . . . . .15, 20 

CBAR.132 . . . . . .15, 20 

CBAR.135 . . . . . .15, 20 

CBAR.143 . . . . . .15, 20 

CBAR.148 . . . . . .15, 20 

CBAR.160 . . . . . .15, 20 

CBAR.206 . . . . . .15, 20 

CBAR.207 . . . . . .15, 20 

CBAR.208 . . . . . .15, 20 

CBAR.209 . . . . . .15, 20 

CHASY.107 . . . . .36 

CHASY.108 . . . . .36 

CHASY.109 . . . . .36 

CHASY.125 . . . . .36 

CHASY.147 . . . . .36 

CHASY.158 . . . . .36 

CHASY.160 . . . . .36 

CHASY.207 . . . . .36 

COVER.113 . . . . .29 

COVER.120 . . . . .33 

COVER.127 . . . . .35 

CTUBE.232 . . . . .28 

CYLASY.1083 . . .31 

CYLASY.1151 . . .33 

ECAP.103 . . . . . . .22 

ECAP.111 . . . . . . .22 

ECAP.129 . . . . . . .30, 33 

ECAP.130 . . . . . . .29, 3 

ECAP.143 . . . . . . .35 

EXT.2244 . . . . . . .36 

EXT.2289 . . . . . . .31 

EXT.2294 . . . . . . .31 

EXT.2298 . . . . . . .31 

EXT.2303 . . . . . . .31 

EXT.2304 . . . . . . .31 

EXT.2323 . . . . . . .31 

EXT.2324 . . . . . . .31 

EXT.2333 . . . . . . .31 

EXT.2334 . . . . . . .31 

EXT.2338 . . . . . . .31 

EXT.2339 . . . . . . .31 

EXT.2340 . . . . . . .31 

EXT.2341 . . . . . . .31 

EXT.2345 . . . . . . .31 

EXT.2349 . . . . . . .31 





INDEX by Part Number 

Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 

EXT.2350 . . . . . . .31 

EXT.255 . . . . . . . .22 

EXT.256 . . . . . . . .22 

EXT.257 . . . . . . . .22 

EXT.258 . . . . . . . .22 

EXT.259 . . . . . . . .22 

EXT.261 . . . . . . . .22 

EXT.2927 . . . . . . .36 

EXT.2949 . . . . . . .36 

EXT.2950 . . . . . . .36 

EXT.2951 . . . . . . .36 

EXT.3000 . . . . . . .36 

EXT.3001 . . . . . . .36 

EXT.3002 . . . . . . .36 

EXT.3003 . . . . . . .36 

EXT.3004 . . . . . . .36 

EXT.3005 . . . . . . .36 

EXT.3006 . . . . . . .36 

EXT.3007 . . . . . . .36 

EXT.3008 . . . . . . .36 

EXT.3009 . . . . . . .36 

EXT.3010 . . . . . . .36 

EXT.3011 . . . . . . .36 

EXT.3012 . . . . . . .36 

EXT.3013 . . . . . . .36 

EXT.3014 . . . . . . .36 

EXT.3015 . . . . . . .36 

EXT.3050 . . . . . . .36 

EXT.3051 . . . . . . .36 

EXT.3052 . . . . . . .36 

EXT.3053 . . . . . . .36 

EXT.3054 . . . . . . .36 

EXT.3055 . . . . . . .36 

EXT.3056 . . . . . . .36 

EXT.3057 . . . . . . .36 

EXT.398 . . . . . . . .31 

EXT.399 . . . . . . . .31 

EXT.400 . . . . . . . .31 

EXT.438 . . . . . . . .31 

EXT.439 . . . . . . . .31 

EXT.440 . . . . . . . .36 

EXT.441 . . . . . . . .31 

EXT.442 . . . . . . . .31 

EXT.443 . . . . . . . .31 

EXT.444 . . . . . . . .31 

EXT.445 . . . . . . . .36 

EXT.450 . . . . . . . .36 

EXT.825 . . . . . . . .31 

EXT.826 . . . . . . . .31 

EXT.830 . . . . . . . .31 

EXTROD.1001 . . .35 

GUIDE.101 . . . . .27 

GUIDE.102 . . . . .27 

HOUSING.123 . . .37 

HOUSING.124 . . .37 

HOUSING.125 . . .37 

HOUSING.218 . . .15 

HOUSING.225 . . .15 

HOUSING.226 . . .15 

HOUSING.229 . . .15 

HOUSING.230 . . .15 

HOUSING.231 . . .15 

HOUSING.237 . . .15 

HOUSING.238 . . .15 

KEY.10020 . . . . . .24, 29, 

33, 35 

KEY.101 . . . . . . . .14, 16, 

18 

KEY.102 . . . . . . . .21 

KIT.1008 . . . . . . . .26 

KIT.1009 . . . . . . . .26 

KIT.1010 . . . . . . . .26 

KIT.1011 . . . . . . . .26 

KIT.1012 . . . . . . . .26 

KIT.1013 . . . . . . . .26 

KIT.1128 . . . . . . . .35 

KIT.1156 . . . . . . . .31 

KIT.1157 . . . . . . . .31 

KIT.1197 . . . . . . . .30, 33, 

35 

LARM.173 . . . . . .15, 19 

LARM.174 . . . . . .15, 19 

LARM.175 . . . . . .15, 19 

LARM.176 . . . . . .15, 19 

LARM.177 . . . . . .15, 19 

LARM.178 . . . . . .15, 19 

LARM.179 . . . . . .15, 19 

LARM.180 . . . . . .15, 19 

LARM.181 . . . . . .15, 19 

LARM.182 . . . . . .15, 19 

LARM.183 . . . . . .15, 19 

LARM.184 . . . . . .15, 19 

LARM.185 . . . . . .15, 19 

LARM.186 . . . . . .15, 19 

LARM.187 . . . . . .15, 19 

LARM.188 . . . . . .15, 19 

LARM.189 . . . . . .19 

LARM.197 . . . . . .19 

LARM.199 . . . . . .19 

LARM.201 . . . . . .19 

LARM.203 . . . . . .19 

LARM.205 . . . . . .19 

LARM.207 . . . . . .19 

LARM.208 . . . . . .19 

LARM.209 . . . . . .19 

LARM.210 . . . . . .19 

LARM.211 . . . . . .19 

LARM.212 . . . . . .19 

LARM.213 . . . . . .19 

LARM.214 . . . . . .19 

LARM.215 . . . . . .19 

LARM.216 . . . . . .19 

LATCHR.102 . . . .26 

LBOLT.105 . . . . . .33 

LEVER.103 . . . . .26 

LEVER.104 . . . . .26 

LEVER.105 . . . . .26 

NUT.101 . . . . . . . .14, 27, 

30, 35 

NUT.103 . . . . . . . .26 

PIN.104 . . . . . . . .14, 16, 

18 

PIN.106 . . . . . . . .13, 18 

PIN.109 . . . . . . . .14, 16, 

30, 35 

PIN.110 . . . . . . . .14, 16, 

30, 35 

PIN.115 . . . . . . . .13, 16, 

18 

PIN.116 . . . . . . . .18 

PIN.128 . . . . . . . .30, 33, 

35 

PKG.102 . . . . . . .22 

PKG.104 . . . . . . .22 

PKG.105 . . . . . . .22 

PKG.133 . . . . . . .33 

PKG.134 . . . . . . .35 

PKG.135 . . . . . . .35 

PKG.150 . . . . . . .29 

PKG.151 . . . . . . .29 

PLUNGER.101 . .26, 31, 

33, 36 

RETAIN.101 . . . . .14 

RETAIN.102 . . . . .14, 18 

RETRACT.101 . . .14, 16, 

29 

RETRACT.102 . . .18 

RING.108 . . . . . . .16 

RIVET.101 . . . . . .37 

ROD.1011 . . . . . .35 

ROD.1036 . . . . . .35 

ROD.1043 . . . . . .35 

ROD.1044 . . . . . .35 

ROD.1080 . . . . . .35 

ROD.1082 . . . . . .35 

RODASY.10001 . .36 

RODASY.10002 . .36 

RODASY.10003 . .36 

RODASY.10004 . .36 

RODASY.10005 . .36 

RODASY.10006 . .36 

RODASY.10007 . .36 

RODASY.10008 . .36 

RODASY.10009 . .36 

RODASY.10010 . .36 

RODASY.10011 . .36 

RODASY.10012 . .36 

RODASY.10013 . .36 

RODASY.10014 . .36 

RODASY.1075 . . .30 

RODASY.110 . . . .27 

RODASY.112 . . . .27 

RRING.102 . . . . .18 

RRING.103 . . . . .14, 16, 

18, 27 

RRING.104 . . . . .24, 26 

RRING.105 . . . . .24, 26 

RRING.109 . . . . .13, 16, 

29, 35 

RRING.112 . . . . .26, 31, 

33 

SCREW.1012 . . .21 

SCREW.1015 . . .13, 18 

SCREW.1016 . . .37 

SCREW.1022 . . .13, 16, 

18 

SCREW.1025 . . .30, 33 

SCREW.1027 . . .13, 16, 

18 

SCREW.1028 . . .13, 16, 

21, 27, 

29, 35 

SCREW.1029 . . .13, 27, 

29, 35 

SCREW.1030 . . .14, 16, 

18 

SCREW.1031 . . .18 

SCREW.1032 . . .16, 37 

SCREW.1037 . . .14, 30 

SCREW.1038 . . .37 

SCREW.1039 . . .14, 18 

SCREW.1043 . . .24 

SCREW.1050 . . .21 

SCREW.1053 . . .21 

SCREW.1055 . . .21 

SCREW.1061 . . .26 

SCREW.1063 . . .26 

SCREW.1065 . . .26 

SCREW.1066 . . .21 

SCREW.1067 . . .30 

SCREW.1068 . . .30 

SCREW.1069 . . .29 

SCREW.1070 . . .30, 33 

SCREW.1072 . . .30, 33 

SCREW.1074 . . .29 

SCREW.1075 . . .33 

SCREW.1076 . . .14, 30, 

35 

SCREW.1077 . . .30, 33, 

355 

SCREW.1081 . . .14, 30, 

35 

SCREW.1082 . . .37 

SCREW.1083 . . .37 

SCREW.1084 . . .37 

SCREW.1085 . . .37 

SCREW.1088 . . .35 

SCREW.1099 . . .28 

SCREW.1105 . . .28 

SCREW.1114 . . .31, 35 

SCREW.1121 . . .31, 35, 

35 

SCREW.1136 . . .24, 26 

SCREW.1141 . . .30, 33, 

35 

SCREW.1143 . . .21, 30, 

33 

SCREW.1150 . . .33 

SCREW.1282 . . .21 

SHAFT.101 . . . . .31, 33 

SHIM.112 . . . . . .16, 37 

SHIM.150 . . . . . .37 

SLIDER.101 . . . . . 33 

SOLENOID.142 . . 26 

SPACER.107 . . . . 33 

SPRING.102 . . . .14, 16, 

18 

SPRING.103 . . . .14, 16, 

18 

SPRING.104 . . . .18 

SPRING.105 . . . .28 

SPRING.127 . . . .24 

STUD.101 . . . . . .13, 16, 

18 

STUD.102 . . . . . .37 

SWITCH.1002 . . .26 

SWITCH.1004 . . .26 

SWITCH.1006 . . .31, 33, 

35 

WASHER.102 . . .24, 26 

WASHER.103 . . .24, 26 

WASHER.107 . . .24 

WASHER.108 . . .28 

WASHER.109 . . .28 

WASHER.110 . . .28 

WASHER.113 . . .26 

WASHER.116 . . .27 

WASHER.120 . . .37 

WASHER.121 . . .37 

WRENCH.101 . . .14, 16, 

18 





41





TA B L E O F C O N T E N T S 

How to Order Closers ................................. 1 

Available Finishes........................................ 1 

Common Applications................................. 2 

SC Series Options ....................................... 3 

SC Series Surface Mount ........................... 4 

Parts and Components ............................... 5 

OHC Series Concealed ................................ 6 

8200 Series Auto Operator ......................... 7 

Warranty ..................................................... 8 

HOw TO OrdEr SC SEriES CLOSErS, COmpONENTS, & ACCESSOriES 

1. The SC60, SC70 & SC80 Series Closers are each certified to meet the requirements of ANSI Standard A156.4, Grade 1. The SC90 Series 

Closers are certified to meet the requirements of ANSI Standard A156.4, Grade 3. 

2. All SC Series Closers are available in AL (689) and DKBRZ (695). BRASS(696) may be available but with longer leadtime. 

Consult factory for details. 

3. SC80 Series Closers are shipped with a standard ‘slim cover’ unless an optional ‘full cover’ is specified. SC60 Series Closers are 

shipped ‘less cover’ unless an optional ‘slim cover’ is specified (SC60 & SC61 only). SC90 Series Closers are shipped ‘less cover’ 

unless an optional ‘slim cover’ is specified. 

4. All SC Series Closers are furnished with a TBWMS fastener pack. 

5. All SC60 and SC80 Series Closers are packed with six (6) identical closers per master carton. 

SC70 Series Closers are packed with four (4) identical closers per master carton. 

HOw TO OrdEr THE OHC100 SEriES CLOSErS, COmpONENTS & ACCESSOriES 

1. OHC100 Series Closers are available with cylinders that allow either a 90° or 105° of door swing. Please specify at time of order. 

2. The OHC100 Series Closer is UL listed. 

3. The OHC101 Series Closer is ADA compliant. The OHC100 is not ADA compliant. 

4. An OHC100 Series cylinder body will always be DKBRZ. 

5. The OHC100 Series would be a retrofit for the following models; Norton 4900, Jackson 20-330, Global TC7000, International 100 or 200 

and the Kawneer Husky II. 

6. The OHC100 Series ‘A’ Style arm is an ‘end load’ arm, the ‘S’ Style arm is a ‘side load’ arm and ‘VO’ Style is used on doors hung with 

offset pivots or butt hinges. 

FALCON Customer Care & Technical Support 

Phone (877) 671-7011 or Fax (800) 288-4242 

S T A N D A R D F I N I S H E S 

AL (BHMA 689) 

Aluminum 

DKBRZ (BHMA 695) 

Dark Bronze 

O P T I O N A L F I N I S H 

BRASS (BHMA 696) 

(Extra Lead Time - Consult Factory) 

Customers, please refer to IRFASTTRACK Price Book for 24-hour/5-day product availability. Please fax orders to 800-288-4242. 


Price Book 2011 • Effective January 31, 2011 • Rev. 1/11 1

C O m m O N A p p L i C AT i O N S 

Series Duty Applications 

SC70 Series Heavy Commercial / Exterior Door 

Commercial / Interior Door 

Aluminum Store Front 

SC80 Series Medium Commercial / Exterior Door 



SC60 Series Light-Medium Commercial / Exterior Door 



SC90 Series Light Commercial / Interior Door 


OHC100 Series Medium Aluminum Store Front 

Retail 


2 


SC Closer Configuration 

To meet your unique requirements, SC closers can be configured by selecting specific options. 

To verify availability of options please contact customer service. 

Cylinder Options 

■ STD (standard cylinder) - Standard cylinder provides a main speed function to control the motion of the 

door from maximum opening angle until the door is a few inches from the latch where function controls the final closing motion. The opening swing is 

controlled by the hydraulic backcheck function from about 70˚ 

to maximum opening angle. 

■ DEL (delayed action cylinder) - Special cylinder provides a separate delayed closing motion from maximum opening angle to approximately 70˚. Then the 

main speed function controls the door motion until the door is a few inches from the latch where latch function controls the final closing motion. During 

the opening swing, the door is controlled by the hydraulic backcheck function from about 70˚ to maximum opening angle. 

Cover Options 

■ FULL - Cover encloses the closer body and the unused pinion shaft. 

■ SLIM - Cover encloses the closer body with a cap on the unused pinion shaft. 

Arm Options 

■ Rw/PA (regular arm with parallel arm bracket) - Nonhold-open arm with adjustable 

forearm assembly to accommodate a range of door and frame reveal conditions. Rw/PA 

Includes PA bracket to allow installation in a parallel arm configuration. 

■ Hw/PA (hold open arm with parallel arm bracket) - Hold-open arm with adjustable 

forearm assembly to accommodate a range of door and frame reveal conditions. 

■ HD (heavy duty arm) - Heavy-duty, parallel arm for use in high-traffic applications. 

■ DS (dead stop arm) - Heavy-duty, parallel arm includes a positive mechanical stop 

and nonadjustable forearm assembly for high volume traffic or potentially abusive Hw/PA 

installation conditions. 

■ DS/HO (dead stop hold open arm) - Heavy-duty, parallel arm includes a positive mechanical 

stop and nonadjustable forearm assembly for high volume traffic or potentially abusive 

installation conditions. Also includes a manually selective hold-open function. 

■ SS (Spring N’ Stop) – Extra heavy–duty, forged constructed parallel arm includes an 

integral spring stop and non-adjustable forearm assembly for high volume traffic or HD 

potentially abusive installation conditions. 

■ SS/HO (Spring N’ Stop Hold-Open) – Extra heavy–duty, forged constructed parallel arm 

includes an integral spring stop and non-adjustable forearm assembly for high volume 

traffic or potentially abusive installation conditions. Also includes a manually selectively 

hold-open function. 

DS 

HO/DS 

SS 

SS/HO 

Fastener Pack 

■ TBWMS (thru bolts with wood machine screws) - Fasteners for installation on wood, 

hollow metal or aluminum storefront-type doors. Thru bolts for installations on 1-3/4˝ 

thick, hollow core doors are included. 

ADA Accessibility Requirements 

■ Closers are preset at the factory or can be configured by the installer to generate less than a 5lb opening force 

on a 36˝ wide interior door to comply with the requirements of the ADA law, Sections 4.13.10 and 4.13.11, and 

ANSI Standard A117.1, Sections 4.13.10 and 4.13.11. 

■ Closers with the optional delayed closing cylinder also comply with the additional advisory suggestions of the ADA law, Section A4.13.10, and ANSI 

Standard A117.1, Section A4.1310. 


NEW 

Adjustable 

1-5 

SERIES NUMBER 

CLOSER SERIES NUMBER 

ALL PRICES IN U.S. DOLLARS 

ARM TYPE 

STANDARD 

FINISHES 

AL (689) 

DKBRZ (695) 

S 

HW 

I E 

P I 

PG 

I H 

NT 

G 

COMPLETE CLOSERS 

SC60 Series 

SC61 ....................................................................................Rw/PA $190 7 

SC61....................................................................................Hw/PA 215 7 

SC61 ....................................................................................HD/PA 215 7 

SC61..........................................................................................DS 235 9 

SC61 ...................................................................................DS/HO 260 9 

SC61 ..........................................................................................SS 305 9 

SC61....................................................................................SS/HO 339 9 

Add for; Slim Cover (SLIM) ($15), Delayed Action (DEL) ($22). 

BRASS (696) finish may be available at an extended lead time (consult factory). 

IR FastTrack items are available in AL (689) finish only. 

SC SERIES CLOSERS 

PRICE LIST 

January 

2011 

SC60 Series 

SC70 Series 

SC71 ....................................................................................Rw/PA $331 10 

SC71....................................................................................Hw/PA 356 10 

SC71 ....................................................................................HD/PA 356 11 

SC71..........................................................................................DS 376 11 

SC71 ...................................................................................DS/HO 401 12 

SC71 ..........................................................................................SS 446 12 

SC71....................................................................................SS/HO 480 12 

Full Cover is Standard. 

Add for; Delay Action (DEL) ($22). 



SC70 Series 

SC80 Series 

SC81 ....................................................................................Rw/PA $263 8 

SC81....................................................................................Hw/PA 288 8 

SC81 ....................................................................................HD/PA 288 10 

SC81..........................................................................................DS 308 10 

SC81 ...................................................................................DS/HO 333 10 

SC81 ..........................................................................................SS 378 10 

SC81....................................................................................SS/HO 412 10 

SC80 Series Closers ship with 'slim' cover unless 'full' cover is specified. 

Add for; Full Cover (FC) ($5), Delayed Action (DEL) ($22) 



SC80 Series 

(w/ full cover shown) 

SC90 Series 

SC91, SC93, or SC94..........................................................Rw/PA $135 5 

SC91 or SC94 .....................................................................Hw/PA 160 5 

Add for: Standard Cover (STD) ($10) (N/A on SC91) 


SC90 Series 

(SC91 shown) 

FT - Also available through IR FASTTRACK. 


4 


Parts and Components 

PRICE LIST 

SERIES NUMBER 



PARTS & COMPONENTS 

SC60 Series 

SC61-3071 ........................................................................Cylinder $120 9 

SC61-3071DEL .......................................................Delay Cylinder 142 9 

SC60-72........................................................................Slim Cover 15 1 

SC60-3077/PA.....................................Regular Arm w/PA Bracket 70 3 

SC60-3049/PA............................................HO Arm w/PA Bracket 95 3 

SC60-3077HD .........................................Heavy Duty Parallel Arm 95 3 

SC60-3077DS...........................................Dead Stop Parallel Arm 115 5 

SC60-3049DS ....................................HO Dead Stop Parallel Arm 140 5 

SC60-3077SS .................................................Spring 'N Stop Arm 185 5 

SC60-3049SS ..............................Spring 'N Stop Hold-Open Arm 219 5 

SC60-18 .............................................Mounting Plate - Top Jamb 27 2 

SC60-18PA.........................................Mounting Plate - Push Side 27 2 

SC60-30 .........................................................Cush Shoe Support 18 1 

SC60-61...........................................................Blade Stop Spacer 20 1 

SC60-62A .....................................................Offset Auxiliary Shoe 15 1 

SC70 Series 

SC71-3071 ........................................................................Cylinder $241 12 


SC70-72 .........................................................................Full Cover 20 1 








SC70-18................................................Narrow Frame Back Plate 46 3 

SC70-18PA .........................................Narrow Top Rail Drop Plate 46 4 




SC80 Series 

SC81-3071 ........................................................................Cylinder $178 10 


SC80-72........................................................................Slim Cover 15 1 

SC80-72FC ....................................................................Full Cover 20 1 













SC90 Series 

SC91-3071 ........................................................................Cylinder $65 6 

SC90-72........................................................................Slim Cover 10 1 






ARM TYPE 

NOTE - SC Series parts may be available in a BRASS (696) finish 

but at an extended lead time (consult factory). 

STANDARD 

FINISHES 

AL (689) 

DKBRZ (695) 

S 

HW 

I E 

P I 

PG 

I H 

NT 

G 




SC60-18 

SC90-18 

(SC94 only) 

SC60-18PA 

SC90-18PA 

(SC94 only) 

SC70-18 

SC70-18PA 

SC80-18 

SC80-18PA 

SC70-62A 

SC60-62A 

SC80-62A 

5

OHC100 SERIES 

PRICE LIST 

SERIES NUMBER 



ARM TYPE 

STANDARD 

FINISH 

S 

HW 

I E 

P I 

PG 

I H 

NT 

G 



NEW 

Adjustable 

1-3 

Grade 1 

NEW 

Adjustable 

3-5 

OHC100 Series - Overhead Concealed (90° - w/o Hold Open) 

OHC100 or OHC101 (SO90)................................................EL-DP $203 16 

OHC100 or OHC101 (SO90) ....................................................VO* 203 16 

OHC100 or OHC101 (SO90)................................................SL/GE 203 16 

OHC100 Series - Overhead Concealed (90° - w/ Hold Open) 

OHC100 or OHC101 (HO90)................................................EL-DP $203 16 

OHC100 or OHC101 (HO90)....................................................VO* 203 16 

OHC100 or OHC101 (HO90)................................................SL/GE 203 16 

OHC100 Series - Overhead Concealed (105° - w/o Hold Open) 

OHC100 or OHC101 (S105).................................................EL-DP $203 16 

OHC100 or OHC101 (S105).....................................................VO* 203 16 

OHC100 or OHC101 (S105).................................................SL/GE 203 16 

OHC100 Series - Overhead Concealed (105° - w/ Hold Open) 

OHC100 or OHC101 (H105) ................................................EL-DP $203 16 

OHC100 or OHC101 (H105).....................................................VO* 203 16 

OHC100 or OHC101 (H105) ................................................SL/GE 203 16 

OHC100 Closers are Grade 1 and adjustable size 3 to 5. 

OHC101 Closers are Grade 1 and adjustable size 1 to 3. 

OHC100 Series Closers utilize a 'Hold-Open' feature within the cylinder assembly. 

*VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695) 

“S” 

“A” 

PARTS & COMPONENTS 

OHC100 Series 

OHC100 or OHC101-S090 .........................Standard 90° Cylinder $178 12 

OHC100 or OHC101-H090 ......................Hold Open 90° Cylinder 178 12 

OHC100 or OHC101-S105 .......................Standard 105° Cylinder 178 12 

OHC100 or OHC101-H105 ....................Hold Open 105° Cylinder 178 12 

OHC100-FB ...................................Mounting Bracket & Hardware 13 1 

OHC100-EL .....................................................“A” Style End Load 44 2 

OHC100-SL ............................................“S” Style Side Load Arm 30 2 

OHC100-VO..................................“VO” Style Offset Arm & Track * 44 4 

OHC100-GE ............................................Center Hung Floor Pivot 24 2 

OHC100-DP ............................................Center Hung Floor Pivot 24 2 

OHC100 Series Closers utilize a 'Hold-Open' feature within the cylinder assembly. 

*VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695) 

“VO” 

“FB” 

GE Pivot 

DP Pivot 


6 


8200 SERIES AUTOMATIC OPERATOR 

PRICE LIST 

SERIES NUMBER 



ARM TYPE 

FINISH 

AL (689) 

S 

HW 

I E 

P I 

PG 

I H 

NT 

G 



FALCON OPERATORS 

8230 Series – Falcon 

8231…………………STD (Pull) $1,975 AL only 41 

Ships with standard 26” length header. 

For parts and accessories, see below. 

8230 Series 

8240 Series – Falcon 

8242…………………REG (Push) 1,975 AL only 41 

Ships with standard 26” length header. 

For parts and accessories, see below. 

8240 Series 

8310 Series Actuators & Accessories 

6” Round – Text w/ Logo 

8310-852T………. Push Plate, Wall Mount $199 

8310-869F………..Mounting Box, Flush 121 

8310-869S………..Mounting Box, Surface 121 

8310-802………… Weather Ring 17 

1 ½” x 4 ¾” Jamb – Text w/ Logo 

8310-818T………. Push Plate, Jamb Mount $129 

8310-819F………..Mounting Box, Flush 29 

8310-819S………..Mounting Box, Surface 29 

Wireless Transmitters & Receiver 

8310-844……….... Transmitter, Wall Mount $148 

8310-844J……….. Transmitter, Jamb Mount 148 

8310-861 …………Transmitter, Handheld 148 

8310-865………..... Receiver 155 

NOTE - Additional actuators and accessories are available through LCN - please 

see the LCN Price List. 

8310-852T 

8310-818T 

8310-844 

8310-865 

8200 Parts List 

8230 Series 

8230-3077T ................................Standard Arm $175 

8230-3077PLCM ..........Standard Arm w/Track 225 

8230-3038................................................Track 60 

8230-72MC ..................................Metal Cover 350 

8230-MS........................................Screw Pack 20 

8230-3018............................Mounting Bracket 230 

8230-3034 ....................................Track Roller 15 

8230-3155 ..........................................Label Kit 19 

8230-3454 ..............Motor Gearbox Assembly 1,596 

8230-3462 ....................................Control Box 999 

8230-3498-2A ......................A/C Power Cable 35 

8240 Series 

8240-3077 ....................................Regular Arm $150 

8240-72MC ..................................Metal Cover 350 

8240-MS........................................Screw Pack 20 

8240-3018............................Mounting Bracket 230 

8240-79......................................................Rod 40 

8240-77 ............................................Main Arm 125 

8240-3155 ..........................................Label Kit 19 

8240-3454 ..............Motor Gearbox Assembly 1,596 

8240-3462 ....................................Control Box 999 

8240-3498-2A ......................A/C Power Cable 35 



WARRANTY 

Falcon warrants its products manufactured to be free from defects in materials and workmanship for a period of ten 

(10) years from the date of manufacturer, except for the OHC100 products, which have a five (5) year limited warranty (see Table 

below for warranty periods). 

PRODUCTS 

SC60, SC70, SC80 AND SC90 SURFACE CLOSERS 

OHC100 CONCEALED CLOSERS 

YEARS 

10 YEARS 

5 YEARS 

8230/8240 SERIES OPERATORS 1 YEAR 

This limited warranty does not cover products that (i) are not the proper size for the application; (ii) are not installed in 

accordance with Falcon published installation instructions; (iii) are installed with improper or incorrect parts 

[Note: It is recommended that the products be installed with the Falcon fasteners provided with the product.]; (iv) have been, in the 

opinion of Falcon, modified, repaired, or altered in any way without the express written consent of Falcon; 

(v) are used for purposes which they are not designed or intended; or (vi) are subjected to misuse, abuse, negligence, or 

accident. The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for 

the removal and reinstallation of products; (ii) shipping and freight expenses required to return products to Falcon; 

(iii) normal maintenance; and (iv) economic losses. 

Falcon will replace the products which, in the opinion of Falcon, are found to be defective, provided said products 

are returned to Falcon, Warranty and Replacement Department, 121 West Railroad Avenue, P.O. Box 100, Princeton, Illinois USA 

61356-0100. 

FALCON SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE 

DAMAGES FOR ANY CLAIM WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT 

LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

This limited warranty is in place of all other warranties, expressed or implied, and excludes any warranties of fitness for a 

particular purpose or merchantability. No agent, representative, dealer, or employee of Falcon has the authority to increase 

or alter the obligations of this limited warranty. 

Note: Should the Product be considered a “consumer product” as may be covered by the Magnuson-Moss Federal Warranty Act, 

please be advised that: (1) Some states do not allow limitations on incidental or consequential damages or how long an implied 

warranty lasts, so that the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a user 

may have other rights which may vary from state to state. 

121 West Railroad Avenue 

Princeton, IL 61356 

8 


Ingersoll Rand's Security Technologies Sector is a leading global provider of products and services that make environments safe, secure 

and productive. The sector's market-leading products include electronic and biometric access-control systems; time-and-attendance and 

personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steel doors and 

frames; and other technologies and services for global security markets. 

877-671-7011 www.falcon.ingersollrand.com www.ingersollrand.com 

© 2011 Ingersoll Rand FA-5137 Rev. 1/11 Printed in U.S.A.

Falcon Jan 2011 Pricebook.pdf - Access Hardware Supply

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?