SOLO cradle SOLSIT one-man seat

SOLOcradleCapacity: 215 kgWeight: 85 kgDimensions:cradle: (LxWxH) 105x70x105 cmoverall height: 230 cmIn the standard version, the SOLOcradle is fitted with a powered TIRAKhoist. As an option it can be fitted witha manual SCAFOR hoist.The whole assembly is easily dismantledand can be loaded and transported in anestate carLightweight design and extremelystable, the SOLO cradle andSOLSIT one-man seat offer a fastmeans of access with a safe andreliable working position for manyinspection, maintenance, cleaningand assembly operations.The reliability of the poweredTIRAK hoist, combined with theBLOCSTOP safety device,mounted on a secondary safetywire rope, ensure complete safetyof the operator, essential forequipment used for lifting people.The two adjustable rollers restagainst the facade to preventspinning and excessive swaying.not only a lift but alsoa working platformThe TIRAK hoist is available in 220 V,0.45 kW, single phase or 220/380 V,0.45 kW, three phase supply. Thelifting speed is 8.5 m/min giving fastaccess to the working position, whichbecomes more important as the heightof the building increases. The liftingheight is limited only by the length ofthe wire rope since it passes throughthe TIRAK hoist without a drum reeler.Should there be a power failure, theoperation of the centrifugal brakeallows controlled lowering, to avoidany long delay in rescue.Built-in safety devices:– secondary safety wire rope– overload safety device– controlled lowering by centrifugalbrake– upper limit switch– safety belt (SOLSIT one-man seat).SOLSITone-manseatCapacity: 120 kgWeight: 50 kgDimensions (LxWxH) 99x78x200 cmwithout the support rollers:45x54x199 cmThe SOLSIT one-man seat is extremelycompact and can pass through aman-hole of 45x54 cm.It can then be used inside very narrowfurnaces, wells and chimneys.2 containers are fitted for carryingtools and cleaning materials.Fast installation and set upThe cradle or work seat can be veryquickly installed and set up foroperation. The two wire ropes arehooked onto the suspension point andthe electric supply cable plugged in –depending on the model of TIRAKhoist – to a 220 V single phase or220/380 V 3 phase supply.An extra power point for a drill orinspection lamp avoids the need foradditional power supply cable.The anchor point: portable, easy to handle and safe!a– mobile suspension jib for flatroofs or window openings.Maximum overhang (a): 1 mStability using 25 kgcounterweights.LThe cradle can be easily moved aroundusing the rollers– fixed or mobile parapet clampsfor parapets ranging from 5 to 32cm in thickness.Overhang (a): 0.67 m.Additional information is available on requestLaP1056.3-6000-06/91© SECALT S.A. 1991TRACTEL S.A.SECALT S.A.29, rue du progrès 3, rue du Fort DumoulinF-93108 Montreuil Cedex B.P. 1113 • L-1011 LuxembourgTél. (01) 48 58 91 32 Tél. (352) 43 42 42-1Fax (01) 48 58 19 95 Fax (352) 43 42 42-200