SD6 Leistungskit für 3.0 CRD - startech
SD6 Leistungskit für 3.0 CRD - startech
SD6 Leistungskit für 3.0 CRD - startech
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Fitting instructions<br />
STARTECH Performance Kit <strong>SD6</strong><br />
Part-no.: LX-<strong>SD6</strong>-00<br />
Connection at the quantity control valve<br />
Chrysler<br />
300 C<br />
<strong>3.0</strong> <strong>CRD</strong><br />
LX<br />
9. Route the <strong>SD6</strong> wiring loom as shown in Fig. 2a or Fig. 2b. Do not fasten it with the supplied<br />
cable ties until all plugs have been connected.<br />
10. Pull off the original plug of the control valve and connect this with the female plug No. 5 of<br />
the <strong>SD6</strong> wiring loom. Connect the male plug No. 5 to the control valve (Fig.:1,2,3)<br />
11. Fasten the connectors with a cable tie onto the vehicle wiring loom of the quantity control<br />
valve<br />
(Fig.: 3)<br />
5.<br />
(Fig.: 4)<br />
Connection at the boost-pressure sensor<br />
12. Pull off the original connector of the boost-pressure sensor and connect this with the female<br />
plug No. 7 of the <strong>SD6</strong> wiring loom. Connect the male plug No. 7 with the boost-pressure<br />
sensor.(Fig.:1,2,4)<br />
13. Fasten the connectors with a cable tie onto the vehicle wiring loom of the boost-pressure<br />
sensor.<br />
Please take care that the wiring is protected at all times from possible<br />
damage and high temperatures. Always re-check all connections, making<br />
sure that these are correctly and completely fastened.<br />
V02 Dipl. Ing. S. Janert Date: 26.10.2006 Page 4 of 6<br />
STARTECH Formblatt-Nr.: 026/04/06<br />
7.
Change language