Anleitung - Graupner
Anleitung - Graupner
Anleitung - Graupner
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Power supply voltage:<br />
6 - 15 V D.C.<br />
Current drain:<br />
Idle current: approx. 60 mA<br />
At max. power: approx. 2.5 A<br />
Max. sine-wave power:<br />
20 W<br />
Max. music power:<br />
Min. 50 W<br />
Max. input sensitivity:<br />
1)<br />
approx. 2.5 V eff / 7 V ss<br />
Input resistance:<br />
approx. 70k Ohm<br />
Suitable loudspeaker impedance: 2 - 8 Ohm<br />
Internal over-temperature guard: Power-off at 140°C<br />
Dimensions:<br />
65 x 45 x 27 mm<br />
Weight:<br />
60g<br />
Terminal pin-outs<br />
LF ~<br />
LF input signal (from sound module)<br />
LF -<br />
Earth for LF input (from sound module)<br />
Battery + Power supply +<br />
Battery - Power supply -<br />
LS + Loudspeaker terminal +<br />
LS - Loudspeaker terminal -<br />
When connecting the amplifier it is important to keep all cables as short as possible<br />
in order to avoid interference effects (hum). The amplifier should also be installed as<br />
far away as possible from speed controllers and electric motors.<br />
Wiring diagram<br />
Spannungsversorgung<br />
6 - 14V DC<br />
-<br />
+<br />
6,3A<br />
-<br />
+<br />
2-8 Ohm<br />
Soundswitch<br />
Soundswitch<br />
1<br />
Loudspeaker<br />
Loudspeakers with an impedance of 2 - 8 Ohm can be connected to the amplifier<br />
(see table Output power table).<br />
The lower the speaker impedance, the greater the output and the louder the volume.<br />
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY<br />
No liability for printing errors. Technical modifications reserved. #0060042 03/2009<br />
8