Honeywell - Schlüsselschalter SS90 (PDF) - IGS-Industrielle ...
Honeywell - Schlüsselschalter SS90 (PDF) - IGS-Industrielle ...
Honeywell - Schlüsselschalter SS90 (PDF) - IGS-Industrielle ...
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
24 Key switch <strong>SS90</strong><br />
V1<br />
V3<br />
H1<br />
S10<br />
BR8<br />
BR9<br />
R4<br />
to<br />
R8<br />
R8<br />
R8<br />
S1<br />
S2<br />
S3<br />
S4<br />
X1/X2<br />
X3<br />
LED display - red<br />
LED display - yellow<br />
Buzzer<br />
DIL switch setting depending on the panel that is connected<br />
(see also resistor value R4 to R8)<br />
(See Section 4 for coding)<br />
Solder jumper – micro switch S 1<br />
(Coding, see Section 4)<br />
Default setting<br />
1 2 3<br />
Solder jumper – power drill protection<br />
Default setting<br />
Optional setting<br />
Power drill protection not enabled<br />
Power drill protection enabled<br />
Resistors not inserted in default setting (in additional bag)<br />
Assembly and resistor value depends on the panel that is<br />
connected (see also DIL switch setting)<br />
Parallel connection of resistors for resistor adaptation possible<br />
in HB/MB Series IAPs<br />
In default setting second switch contact<br />
(with BR8 coding as opener)<br />
Tamper rupture contact<br />
Tamper lid contact<br />
as NO contact<br />
Sustained or momentary contact for arming/disarming (default is<br />
sustained contact, read assembly and installation instructions)<br />
Flat cable connection<br />
Power drill protection connection – pay attention to BR9!<br />
X4 Rupture contact S2<br />
in cavity wall installation without function<br />
(jumpers in additional bag)<br />
X5 Terminal strip (A, B, 1 to 12)<br />
A<br />
B<br />
C<br />
Strain relief for connection cable<br />
System ground housing lid<br />
Cable entry<br />
close X4 bridge