DVB-T Outdoor Antenne - Zehnder

Pole Mounted application
Step 1.Take a wooden pole or metallic pole
Step 2.Take the pole mounting kits
Step 3.Hooks 2 U type screws on the pole.
Take the multi-directional base
through screws. Fixed 4 butterfly
type washers and fixed them.
Step 4.Fix the main unit on the
multi-directional base
Step 5.Take the Coaxial(IEC male to IEC
female) Cable connect the IEC Male
Final
end to the IEC Female End of your
Set Top Box or TV Set and IEC
female to “Receiver” on power inserter. Take another coaxial (F male to IEC male) cable,
connect the F-male End to the F-Female End of the AS 07 and IEC male to “Antenna” on
Power inserter. Please note: all the connection should be fixed. It is recommended that you
should had a water-drop loop at the end of cable before entering your home.) (if your
installation is outdoor)
Step 6.Take out the AC-DC Adaptor, connect the barrel end to the DC input of Power inserter, AC end
to the AC Outlet. Please note use only supplied AC adaptor
Step 7.Adjust the orientation of AS 07.
(Normally speaking, the signal is horizontal direction.)
Specifications:
Frequency Range VHF 47~230MHz,Channel 02~12, UHF 470~890MHz,CH 21~69
Amplifier Gain
20 ±3 dB
Power supply
9V DC/100mA, with power adaptor
5V DC/50mA, with DVB-T receiver
Power Adaptor
AC ~230V/50Hz ; DC 9V/100mA
Size: L x H x W
112 x 210 x 60 mm
Mast diametter
Max. 35mm
Disposal
Electronic equipment is not household waste. In accordance with directive 2002/9
6/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January
2003 on used electrical and electronic equipment, it must be disposed of properly.
„At the end of its service life, take this unit for disposal at the designated public collection points."
HEINRICH ZEHNDER GMBH Telefon: 07729/881-0
Weierhalden 37/1 FAX: 07729/881-72
78144 Tennenbronn info@zehnder-sat.de