Neues im PFERD-Programm 206

Chain saw sharpeners
CHAIN SHARP CS-X
The new chain saw sharpener
CHAIN SHARP CS-X is excellent for the manual
sharpening of saw chains.
Saw tooth and depth gauge are sharpened in
one work cycle.
Manual sharpening saves costs, is economical
and goes much easier on material than mechanical
sharpening. Sharpening with CHAIN
SHARP CS-X guarantees longer durability and
use of the saw chain.
Order No. EAN
4007220
Depth gauge files
for CS-X
New in the PFERD Product Line 201
Advantages:
� No time-consuming conversion, change
from left to right tooth by turning the
device.
� Blunt files are simply replaced through the
opening at the side. All three files can be
changed quickly and easily.
� The file design prevents incorrect file fitting.
� Symbols for saw and saw tooth and arrows
for file direction explain the tool.
Suitable for
chainsaw file dia. [mm]
Chain Saw Sharpeners CHAIN SHARP
Each chain saw sharpener CS-X consists of the
following:
� Sharpening device,
� 2 chain saw files,
� 1 depth gauge file.
Available in four different types.
Different sharpeners may be needed, depending
on saw chain dimensions. Chain saw
sharpeners come in a self-service pouch,
complete with detailed instructions for use.
Ordering example:
EAN 4007220835913
CS-X-4,0
Suitable
depth gauge file
N! CS-X-4,0 835913 4,0 4132 1 0,330
N! CS-X-4,8 835920 4,8 4132 1 0,350
N! CS-X-5,16 835937 5,16 4132 1 0,360
N! CS-X-5,5 835944 5,5 4132 1 0,370
Rectangular file, cut on two sides. Matching
the appropriate chain saw sharpeners.
Order No. Length
[mm]
Length
[inch]
EAN
4007220
Cross-section
[mm]
Cross-section
[inch]
N! 4132 200 8 831335 9 x 6,0 23/64 x 15/64
Change from left to right tooth by turning the device.
Ordering example:
EAN 4007220831335
4132 200 mm
Depth Gauge Files
Suitable for
CS-X 4,0,
CS-X 4,8,
CS-X 5,16,
CS-X 5,5
10 0,800
5