Beton Concrete - Testing Equipment for Construction Materials

Technische Änderungen vorbehalten. Subject to technical modification without notice.
Beton
Concrete 2
Computerised control console
Servo-controlled for the automatic performance of
all important tests on the mechanical properties
of concrete, cement, plaster, blocks, rocks and
other building elements.
- Compression and fl exure testing with both load
and displacement control
- Measurement of deformability: automatic test
cycles for calculation of the elastic modulus
Up to 2 or 3 test frames may be connected
to the control console.
Dimensions w x d x h: 1115 x 550 x 1000 mm
The control console consists of the following in detail:
- The hydraulic drive unit, with electric multi-piston
high-pressure pump, low-pressure pump for fast
piston action while idling, oil reservoir, distribution
block, valves, cooling systems and filter
- Control electronics managed by microprocessors
- PC, keyboard, monitor and printer
- Software modules for the individual testing
operations
User friendly software for WINDOWS 95/98 for
on-sreen control of the console from PC, allowing
the following: selection of test frame, selection
of the test procedure, digital calibration, selection
of test parameters, test runs, real time data
acquisition, visualisation of all measures and
operations carried out, processing and storage
of all test data, logging of test results and output
of test certificates.
Please describe the testing task that you must The list of modules available for each model is
carry out. We will then submit an offer tailored given below. This line of modules enables a great
to your specific needs. number of tests to be conducted.
Bestell-Nr.
Order no.
Tests Main standards
Compression test on concrete BS 1881:115, UNI 6132, EN 12390-3, ASTM C39
Third point and centre point fl exure text on concrete BS 1881:118, EN 12394, ASTM C78, ASTM C293
Indirect tensile test on concrete UNI 6135: EN 12390-6 (ASTM-NF-BS), BS 1881:117
Compression test on cement EN 196, DIN 1164, ASTM C109, C349
Flexure test on cement EN 196, ASTM C348
Compression test on blocks EN 771/3, BS 6073, ASTM E447
Flexure test on fl at blocks BS 6073
Compression test on interlocking paving blocks BS 6717, UNI 9065
Indirect tensile test on interlocking paving blocks EN 1338
Flexure tests on kerbs and slabs BS 7263
Tests for determination of the elastic modulus UNI 6556, ASTM C469, ISO 6784
Tests on rocks with load and displacement control
User-definable tests with load + displacement control
ISRM 1983, ASTM D2664
Key to symbols: : supplied as standard : Optional extra : Not available
TESTING Bluhm & Feuerherdt GmbH . Motzener Str. 26 b . 12277 Berlin . Tel.: +49-(0)30-710 96 45-0 . Fax: +49-(0)30-710 96 45 98 2.59
2.1100
2.1101
2.1102
2.1103