Novo Speed Flex - Novoferm

Door-open / door-closed-controlWhen the door-open/door-closed-entry is activated with a closed door, the door opens.When the door-open/door-closed-entry is activated with an opened door, the door closes.The following control elements qualify as door-open/door-closed control devices: pressbuttons, pull switches, radiographic receivers with remote control.Emergency control in the event of power failureIn the event of an emergency the door plate can be pushed out of the guides!A no-break unit is also available as an option.FailuresFailures in standard modelFailures that you can solve yourself: standard door model:The door plate has been moved out of the guides• the door corrects this automatically.The door plate is jammed at the location of the lintel• close the door and then fully open it again WITH THE PRESS BUTTONS ON THESWITCH CUPBOARD.The door does not respond to anything• check whether supply voltage is availableFailures with 'timer' switch cupboardThe door does not respond to connected controls• check whether supply voltage is available.The door does not close anymore• see error messages in the manual of the control.Failures you CANNOT solve yourself:Collect the following data before phoning your service company:• the serial number (s/n) as mentioned on the type plate (this can be found on one ofthe side guides or (if applicable) on the switch cupboard.Novo Speed FLEX (06/2011) 9