Fortsetzung - Leica Geosystems
Fortsetzung - Leica Geosystems
Fortsetzung - Leica Geosystems
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
6<br />
0<br />
2<br />
1<br />
6<br />
Datenkonvertierung, <strong>Fortsetzung</strong><br />
Konfigurations-Dialog, Forts.<br />
Einstellungen Zieldatei<br />
ZielDatEndung<br />
Festlegung der Dateiendung für die<br />
Ausgabedatei<br />
Dez.stelle<br />
Festlegung der Anzahl Dezimalstellen<br />
bei der Ausgabe, falls nicht vom<br />
Format (wie z.B. GSI) eingeschränkt<br />
(wählbar sind "wie Instrument" oder<br />
0, ...,6 Dezimalstellen)<br />
Rückkehr zum<br />
Konvertierungs-Dialog.<br />
Aufruf des ASCII - Konfigurations-Dialog.<br />
ASCII Konfigurations-Dialog<br />
Im ASCII Konfigurations-Dialog kann<br />
das ASCII Format definiert werden.<br />
Dieses Format gilt sowohl für ASCII-<br />
Ursprungsdateien wie auch für ASCII<br />
Zieldateien.<br />
KONF\ ASCII Datei Format<br />
Trennzeichen: Leerzeichen<br />
PtNr Pos : 1<br />
Ost Pos : 2<br />
Nord Pos : 3<br />
Höhe Pos : 4<br />
Pt. Code Pos: 5<br />
OK STAND<br />
Attrib 1 Pos: 6<br />
Attrib 2 Pos: 7<br />
Trennzeichen<br />
Festlegung der Trennzeichen zwischen<br />
den Daten bei der Ausgabe<br />
(wählbar sind Leerzeichen, Komma<br />
und Tabulator)<br />
PtNr, Ost, Nord,... Position<br />
Für jede Komponente muss die Position<br />
im ASCII Format festgelegt werden<br />
(wählbar sind "keine" oder<br />
1,..,10).<br />
Zurücksetzen auf die<br />
Standardwerte (wie oben<br />
abgebildet).<br />
58<br />
Systemfunktionen TPS1100 - Gebrauchsanweisung 2.2.1de<br />
MC<br />
ENDE