CAT Product Overview

Ingenieurbüro
M.ZippererGmbH
From marketing knowledge to real innovation
Ingenieurbüro
M. Zipperer GmbH
Etzenbach 16
D 79219 Staufen
Telefon 076 36 /78 03-0
Telefax 076 36 /78 03-45
info@cat-ing.de · www.cat-ing.de

Ingenieurbüro
|Stirring Motors
Overhead Stirring Motors
brushless
R 100Cbrushless
R 100CT
R 20
pure power
up to 600 Ncm
Stirring Motors
Unit
Description
Torque
Rpm
Part No.
R 100CT The „bull“ of Ingenieurbüro CAT high torque stirring motors applies up to 600 Ncm torque at
speeds of 10–500 rpm. Ideal for medium to high viscous media, 10,5 mm chuck, hollow shaft,
µ-controller and alpha-numeric display of mechanic power, torque and timer, RS 232.
R 100C Powerful stirring motor 150 Ncm for laboratory and pilot-plant use, 10.5 mm chuck
with hollow shaft, microprocessor, speed controlled and torque display, timer, RS 232.
R 100CL Same as R 100C but with 250 Ncm torque and speed range of 30–1100 rpm.
R 100SD General purpose laboratory use, same as above but with 4- digit LED speed readout.
Max. torque 100 Ncm. Hollow shaft and precision chuck at 10.5 mm.
(Accessories: Special stand for all R 100 overhead stirrers Part No. 60494, special clamp,
essential for all R 100 overhead stirrers Part No. 60495
600
150
250
100
10–500
40–2000
30–1100
40–2000
60314-00
60218-00
60315-00
60313-00
R 80D
R 80PC
R 50D
R 50
R 18
R 60
R 60PC
R 20
R 20PC
R 16
R 14
R 2
R 1
High torque stirrer 80 Ncm for lab use, clamping diameter 1–10.5 mm;
stirring capacity 120 liters related to water, electronic speed control/display
Same as R 80D, but with RS 232 interface
High torque stirrer, up to 50 Ncm torque, for lab use, hollow shaft, adjustable 10.5 mm chuck,
electronic speed control/display
Same as R 50D, but without digital speed display
Laboratory stirrer, up to 18 Ncm torque, electronic feed-back control
Compact Overhead stirrer, up to 60 Ncm torque, speed range 20 - 700, 60W motor, keyless
chuck (10 mm), hollow shaft to fasten tools up to 8 mm, 24V/DC power supply 100-240V/AC
Same as R 60, but with RS 232 interface additional
Compact Overhead stirrer, up to 20 Ncm torque, speed range 50 - 2000, 60W motor, keyless
chuck (10 mm), hollow shaft to fasten tools up to 8 mm, 24V/DC power supply 100-240V/AC
Same as R 20, but with RS 232 interface additional
Small laboratory stirrer, brushless motor, hollow shaft , keyless chuck,
to hold stirring paddles with a shaft diameter of 6 mm, weighs only 800 gramms
Small laboratory stirrer, steplessly adjustable
Mini-stirrer, fixed speed, stainless steel stirring paddle
Hand stirrer, battery-powered, for use with disposable stirring rods and
special stainless steel stirring blades
80
80
50
50
18
60
60
20
20
4
20–700
20–700
50–1600
50–1600
100–2000
20-700
20-700
50–2000
50–2000
50-900
100-2000
750
3000
60310-00
60311-00
60216-00
60215-00
60214-00
60214-60
60214-65
60214-50
60214-55
60213-50
60213-40
60212-00
60211-00

Ingenieurbüro
|Stirring Motors
and Stirring Paddles
motors
R 50D
Manifold blades for stirring and dissolving 60618-50
Dissolver 60617-50
R 80D-PC
R 16
Part No.
Blade Stirrer
Length
including blade Diameter
of rod
Diameter
of blade
Part No.
Propeller Stirrer
Length
including blade Diameter
of rod
Diameter
of blade
8B009404
8B009408
400 mm
500 mm
8 mm
10 mm
70 mm
70 mm
8B009700
8B009703
8B009704
8B009705
300 mm
300 mm
400 mm
500 mm
6 mm
8 mm
8 mm
8 mm
50 mm
50 mm
50 mm
50 mm
8B009504
8B009508
400 mm
500 mm
8 mm
10 mm
70 mm
70 mm
8B009603
8B009604
8B009605
300 mm
400 mm
500 mm
8 mm
8 mm
8 mm
50 mm
50 mm
50 mm
Part No.
Centrifugal Stirrer
Part No.
8B009210
Part No.
8B009100
8B009103
8B009104
8B009105
8B009110
8B009114
8B009000
8B009004
8B009010
Propeller Stirrer
400 mm
300 mm
300 mm
400 mm
500 mm
400 mm
500 mm
300 mm
400 mm
400 mm
8 mm 90/15 mm
6 mm
8 mm
8 mm
8 mm
8 mm
10 mm
6 mm
8 mm
8 mm
50 mm
50 mm
50 mm
50 mm
70 mm
100 mm
50 mm
50 mm
100 mm
60618-50
60619-00
60618-00
Part No.
60617-50
60617-00
60618-00
Part No.
60494-00
60495-00
60709-00
60491-00
60492-50
Stirring blade + shaft
Stirring blade
Stirring shaft ø 8x350
Dissolver + shaft
Dissolver ø 100
Dissolver shaft ø 8x350
U-Stand
Special clamp for R 100
Software for Windows
PC-connecting cable
Pedestal Stand
Cross Over Clamp Steel
Technical details are subject to change without prior notice.

Ingenieurbüro
|Homogenizers
Homogenizers
Build your Dispersing
System by selecting a
Motor plus one Tool
DK 30
T 30
T 20
T 10
T 17
T 6
T 6
Homogenizers/ Motors (Drive units)
Unit
Description
X 1740
High-power, heavy-duty drive motor with electronic speed control,
1500 watts for 40 mm tools
Unidrive X 1000 Powerful drive motor, built-in speed control for all dispersing tools below up to 30 mm
Unidrive X 1000D Same as above but with digital speed display
X 360
Drive motor, 360 watts, high speed motor, speed control separateley available
P 1500 Speed control unit for X 360
X 120
Hand-held, high speed drive motor for small volumes electronically stabilized
Speed control for tools up to 17 mm
Rpm
2500–22000
4000–33000
4000–33000
45000
10000–33000
Part No.
60408-00
60402-00
60406-50
60401-00
60493-00
60404-00
Homogenizer/ Dispersing Tools (interchangeable all stainless steel)
Volume
0,1 - 50
6
Part No.: 60420/60410
-V -N -F -M
1 - 250 T 10 10 205 7,5 10 2 7 4 7 4 15 2 7
10
Dispersing
tools*
T 6/T 6 lang
Part No.: 60421
diam.
(mm)
Shafts
length
(mm)
6 105-170
Rotor/Stator
diam. (mm)
4 6
Teeth per rotor/stator
viscous V low viscosity N fine F
V-rotor + V-stator F-rotor + V-stator F-rotor + F-stator
= V-generator = N-generator = F-generator
-V -N -F -M
knife**M
M-rotor + M-stator
= M-generator
2 7 4 7 4 11 2 7
Possible motors
motors
/ max. v
m/sec.
X 120
X 360
Unidrive X 1000
Unidrive X 1000D
X 120
X 360
Unidrive X 1000
Unidrive X 1000D
9,5
17,5
* T denotes Teflon bearing, G denotes ceramic seals ** Special knife generator for stringy and fibrous materials

Ingenieurbüro
|Homogenizers
X 360
Unidrive X 1000D
AX 60
DK 40
X 120
Unidrive X 1000
Homogenizer/ Dispersing Tools (interchangeable all stainless steel)
Volume
5 - 1000
17
20
Dispersing
tools*
T 17
diam.
(mm)
Shafts
length
(mm)
10 205
Rotor/Stator
diam. (mm)
12,5 17
viscous V
V-rotor + V-stator
= V-generator
* T denotes Teflon bearing, G denotes ceramic seals ** Special knife generator for stringy and fibrous materials
Teeth per rotor/stator
low viscosity N
F-rotor + V-stator
= N-generator
fine F
F-rotor + F-stator
= F-generator
knife**M
M-rotor + M-stator
= M-generator
2 9 6 9 6 13 2 9
10 - 2000 T 20/G 20 20 265 15 20 2 9 6 9 6 13 2 9
30 - 5000
30
40
Part No.: 60426
Part No.: 60422/60423
T 30/G 30 20 255 25 30 3 13 6 13 6 17 3 13
Part No.: 60424/60425
100 - 20000 T 40/G 40 20 360 33 42 4 13 8 13 8 23 4 13
Part No.: 60414/60415
-V -N -F -M
-V -N -F -M
-V -N -F -M
-V -N -F
Tools Description Part No.
DK 30 Stainless steel, flow through chamber for shaft G 20 and G 30, flow 3000 ltr/h
60428-00
DK 40 Stainless steel, flow through chamber incl. motor and G 40, flow 5000 ltr/h
60429-00
AX 60 Analytical mill (use drive unit X 520 or Unidrive) stainless steel grinding chamber with separate cooling channels 60409-00
All tools are available for coarse, medium and fine grade and with special cutting knifes. Please see detailed information in special leaflet “High efficiency Homogenizers”.
Possible motors
motors
/ max. v
m/sec.
X 120
X 360
Unidrive X 1000
Unidrive X 1000D
X 360
Unidrive X 1000
Unidrive X 1000D
Unidrive X 1000
Unidrive X 1000D
29,5
35,4
32,7
X 1740 40,8
Technical details are subject to change without prior notice.

Ingenieurbüro
|Magnetic Stirrers
Hotplate Stirrers and
PT 100
MCS 67
M 23
M 26
KM 16
M 11
Hotplate Magnetic Stirrers
Unit Description Watts Rpm Temp Part No.
MCS 66
MCS 67
Microprocessor controlled, LCD display, programmable multistep timer, safety temp.,
temp. ramps, RS 232, Eloxal hotplate, membrane keyboard, PT100 sensor
Same as above but with Ceran® hotplate
500
600
50–1600
50–1600
40°-330°
40°-440°
60276-00
60277-00
M 36
Microprocessor controlled, alpha-numeric LCD-display, Ceran hotplate,
square 210 x 210 mm, halogen heating, connector for PT100 sensor,
programmable timer and safety temp., RS 232 via adapter possible
1200
60-1100
40°-500°
60376-00
M 26G2
Microprocessor controlled, alpha-numeric LCD display, Eloxal hotplate 2 independant
safety circuits, connector for PT100 sensor programmable: timer, safety temp.,
temp. ramp., RS 485 interface, (RS 232 via adapter possible)
500
60–1600
40°-360°
60279-00
M 21
M 22
M 23
M 11
M 12
M 13
M 6
M 6.1
M 6.2
ECM 6
Microprocessor controlled, 4 digit temp., speed, and time display, RS 485 interface, (RS 232 via
adapter possible), temp.- control via PT100, soft start, safety features, stainless steel hotplate
Same as above but with Eloxal hotplate
Same as above but with Ceran® hotplate
Electronic feed-back speed control, stainless steel hotplate, KTA1
Electronic feed-back speed control, Eloxal hotplate, KTA1
Electronic feed-back speed control, Ceran® hotplate, KTA1
Electronic feed-back speed control, Ceran® hotplate
Electronic feed-back speed control, stainless steel hotplate
Electronic feed-back speed control, Eloxal hotplate
Compact low-energy stirrer, Eloxal hotplate, square 90 x 90 mm
500
500
600
500
500
600
600
500
500
160
60–1600
60–1600
60–1600
100–1600
100–1600
100–1600
60–1600
60–1600
60–1600
10–1200
40°-350°
40°-380°
40°-500°
40°-330°
40°-330°
40°-400°
40°-400°
40°-330°
40°-330°
40°-250°
60361-00
60362-00
60363-00
60270-00
60271-00
60272-00
60266-00
60268-00
60269-00
60256-00
KM 16.4D Magnetic hotplate stirrer and bath heater for round-bottom flasks of 100,
250 or 500 ml, Microprocessor controlled, 4 digit temp., speed and time LED display,
connector for PT-100 probe
KM 16.7D Same as above but for round-bottom flasks of 1000, 2000 ml
1
with connector for electronic and standard contact thermometer.
500
500
60–1100
60–1100
40°-450°
40°-450°
60357-00
60358-00

Ingenieurbüro
|Magnetic Stirrers
Magnetic Stirrers
M 6
M 15
100 ltr.
ECM 6
M 30
ECM 2
Magnetic Stirrers (with stainless steel cases)
Unit Description max. Liters Rpm Part No.
M 30.30 Electronic feed-back speed control, volumes up to 100 liters
M 20.20 Electronic feed-back speed control, volumes up to 50 liters
M 15 Opto-electronic speed control
M 5 Stirrer with electronic feed-back speed control
ECM 5 Compact low-energy stirrer, electronic speed control
ECM 2 Compact stirrer for cell treatment, low speed range
M 2 Small lightweight stirrer, fixed speed, pp - housing
Accessories for MCS 66, MCS 67, M 26, M 16.5, M 16.6 and M 17.5
PT100
Electronic temperature probe complete, probe diameter 3mm, total length 300 mm
PT100 duplex Duplex electronic temp. probe for M 26 only
Accessories for M 11, M 12, M 13
Electronical contact thermometer, digital and mercury free with Pt-1000 probe
Length: 250 mm, temp. range: 50°C to 300°C
Stirring Bars
Length: 10 mm Diameter: 6 mm
20 mm 7 mm
25 mm 7 mm
30 mm 7 mm
40 mm 7 mm
50 mm 7 mm
60 mm 7 mm
80 mm 10 mm
1 Set of stirring bars, Content: 12 pieces
Part No.
8b035009
8b035017
8b035020
8b035022
8b035024
8b035028
8b035031
8b035035
8b000000
Stirring Bar Extractor
100
50
10
10
1
1
1
Length: 150 mm Diameter: 10 mm
200 mm 10 mm
250 mm 10 mm
100 -1100
100 -1100
60-1600
60-1600
10-1200
2-200
500
Egg-shaped stirring bar for M 20.20 and M 30.30
60254-00
60253-00
60261-00
60265-00
60255-00
60252-00
60260-00
60278-00
60673-00
60664-00
Part No.
8b037202
8b037204
8b037206
Technical details are subject to change without prior notice.

Ingenieurbüro
|Magnetic Stirrers
Hotplates and Heaters
(usual temperature range: 40 - 300°C thermostat controlled)
H 3.1
H 17.5D
H 3
H 30/30C
H 4
H 30D
Heaters
Unit Description Watts Part No.
H 17.5D
H 3
H 3.1
H 4
H 30D
Microprocessor controlled, 4 digit temp., speed and time LED display, Ceran® hotplate, 135 x 135 mm
connector for PT-100 probe, RT to 500°C
Ceran® hotplate 135x135 mm
Stainless steel hotplate ø130 mm dia
Sandbath for sand, oil or other fluids, 1 ltr st. steel bath
Microprocessor controlled, 4 digit temp., and time display, RS 232-via adapter possible,
temp.- control via Pt-100, safety features, aluminium hotplate, RT to 380°C
H 30/30 Aluminium hotplate 300x300 mm
H 30/30C Ceran® hotplate, otherwise same as H 30/30
H 30/45 Aluminium hotplate 300x450 mm
H 30/45C Ceran® hotplate, otherwise same as H 30/45
H 60/30 Aluminium hotplate 600x300 mm
H 60/30C Ceran® hotplate, otherwise same as H 60/30
600
600
500
600
2000
2000
2000
2000
2000
4000
4000
60228-00
60223-00
60225-00
60224-00
60226-50
60226-10
60226-30
60226-20
60226-40
60226-60
60227-70

Ingenieurbüro
|Shakers and Mixers
Shaking Heaters
SK 10
SH 10 with
”Deep Well“ adapter
SH 10
SH 26
Shaking Heaters
Unit
Description
Frequency
Part No.
SH 26.2 Shaking heater for 4 microtiter plates, high precision temp. control from RT to 95°C
in steps of 0.1°C Programmable over-temperature-cut-out. Optical control via a 2 x 16
character alpha-numeric LCD. Protection against unintended changes on set temperature,
safety-temperature, switch-off timer, RS 232 and special indexing mechanismn which stops
platform always at defined position.
SH 26.3 µP controlled thermo shaker for 48 Eppendorf tubes of 1.5ml content, RT to 95°C, 3mm orbit.
SH 26.3
SH 26.4
µP controlled thermo shaker for 48 Eppendorf tubes of 2.2ml content, RT to 95°C, 3mm orbit.
Shaking and heating up to 160°C, 2 heating blocks for 24 reagent vessels
of either 1.5 or 2ml.
SH 25 Shaking heater for microtiter plates, high precision temp. control from RT to 90°C
Programmable over-temperature-cut-out. Optical control via a 2 x 16 character
alpha-numeric LCD. Protection against unintended changes on set temperature,
safety-temperature and switch-off timer.
Heating blocks for a great variety of microplates are available upon request.
SK 10
SH 10
Cooling/Heating shaker via bath thermostat.
Operating temperature range minus 5° to 95°C.
Shaking frequency: 200 - 800 rpm
Modular shaking/heating unit with separate electronic control box suitable for
automated applications. Operating temperature from RT to 95°C.
Shaking frequency: 200 - 1.700 rpm, various models available upon request.
The size of both shakers is based on the "footprint" of a microtiter plate. Please contact us in
case of special applications. Stand-alone versions will be available soon.
60–1100
60–1100
60–1100
60–1100
40–200
65287-00
65287-30
65287-80
65287-40
65286-00
75580-xx
Technical details are subject to change without prior notice.

Ingenieurbüro
|Shakers and Mixers
Shakers
S 25
S 50
S 20-V
VM 2 VM 3
S 20 with various shaking attachments
S 20-S
Shakers
Unit
Description
Frequency
Part No.
S 25
S 26
Powerful shaker with linear reciproce shaking motion, RS 232 interface for computer control,
indexing mechanism, timer, 20mm amplitude. To be combined with various shaking adaptors
Powerful shaker with horizontal shaking motion, RS 232 interface for computer control, indexing
mechanism, timer, 3mm amplitude. To be combined with various shaking adaptors
40-200
60-1100
60385-00
60386-00
S 50
S 20
S 20D
Wrist-action shaker for up to 8 Erlenmeyer flasks of 500 ml each, feed-back speed control, 60 min timer
Multi-use orbital shaker, electronic feed-back speed control, 3 mm amplitude, 0-60 min timer,
40 W, to be combined with the following shaking-adaptors
Same as S 20 but with digital display and digital timer
50-800
100-1100
100-800
60285-00
60283-00
60289-00
S 20 Shaking Attachment:
E- shaking-attachment for single hand held vessels
S- platform with adhesive mat, to hold petri dishes and similar items (200x400mm)
V- shaking-attachment for either 4 Erlenmeyer flasks or round-bottom flasks
U- universal shaking-attachment, two rubber rollers to hold Erlenmeyer flasks
R- test tube shaking-attachment to hold 36 test tubes of up to 16 mm o.d. variable from
vertical to 45° inclination
VM 2 Vortex mixer for up to 30 mm o.d. test tubes, continuous or touch operation, feed-back speed control
VM 3 Vortex mixer for up to 20 mm o.d. test tubes, continuous or touch operation, feed-back speed control
VM 4 Universal vortex mixer for test tubes, microcentrifuge tubes and microtiter plates,
timer controlled or touch operation, feed-back speed control
ST 5 Bidimensional shaker, flat tray 410 x 340 mm, oscillation angle at 3, 6, 9 and 12°,
electronic speed control
ST 5D Same as above but with digital display
ST 3 Bidimensional shaker, flat tray 210 x 210 mm, oscillation angle at 5° or 7°. electronic speed control
GM 3 Shaker with 3D-movement. Ideal for low foaming agitation as well as DNA extraction.
Angular tilt: 5° and 7°. Platform dimension: 210 x 210 mm to hold Petri dishes, micro plates and
other small containers. With digital display and built in timer: up to 99 hours
400-2800
400-2800
400-2800
10-100
10-100
5-50
5-50
60683-00
60684-00
60685-00
60686-00
60687-00
60204-00
60203-00
60208-00
60281-00
60282-00
60381-00
60382-00

Ingenieurbüro
|Shakers and Mixers
and Mixers
ST 5D
RM 5 W-40
RT 60
S 20-U
S 20-R
GM 3
(ST 3 looks as GM 3)
Accesories for Shaker S 25 and S 26
Shaking Adaptor for Erlenmeyer flasks, 6 flasks à 250 ml, 4 flasks à 500 ml
Shaking Adaptor for max. 4 separating funnels
Clamps for Erlenmeyer flasks: 25 ml, 50 ml, 100 ml, 250 ml, 500 ml
Accesories for Shaker ST 3 and GM 3
Detachable platform
Horizontal Mixers
Unit
RM 5-40
RM 5K-30
RM 5-6
RM 5-30V
RM 5-80V
RM 5W-40
RM 5W-30V
RM 5W-80V
Description
5 rollers synchronous rocking and rotating tube mixer
Same as RM 5-40, but shorter rollers
Same as RM 5-40, but slow speed
Same as RM 5-40, but variable slow speed
Same as RM 5-40, but variable high speed
Same as RM 5-40 but with removable rollers
Same as RM 5-40 but with removable rollers and variable slow speed
Same as above but with removable rollers and variable high speed
RM 10W-30V 10 removable rollers synchronous rocking and rotating tube mixer, variable slow speed
RM 10W-80V Removable rollers synchronous rocking and rotating tube mixer, variable high speed
RT 20
RT 60
Rotating and swaying mixer for 20 test tubes up to 15 mm o.d., exchangeable tube holders
Rotating and swaying mixer for 60 test tubes, 12, 15 and 18 mm o.d.
Watts
25
25
6
25
25
25
25
25
50
50
6
6
Rpm
35
30
6
1-30
10-80
36
1-30
10-80
1-30
10-80
6
6
Part No.
60205-00
60205-10
60206-00
60207-00
60207-80
60205-30
60207-40
60207-50
60207-10
60207-90
60201-00
60202-00
Technical details are subject to change without prior notice.

Ingenieurbüro
|Liquid Handling and Pumps
Liquid Handling
Liquid processor
OEM pump
Contiburette
µ 10H (µ20H)
Contiburette
µ 10D
Liquid processor
Dispensing Units
Unit
Liquid processor
Contiburette µ 10H
Contiburette µ 20H
Contiburette µ 1D
Contiburette µ 10D
Contiburette µ 10DR
Contiburette µ 20D
Contiburette µ 20DR
Description
System comprising a bottle-mounted dispensing unit for precise dispensing, pipetting, diluting,
sampling and time controlled operations, microprocessor controlled, remoteable programming keypad,
with 2 line a-numeric LCD display, RS 232 interface, handles volumes from 10 µl to 100 ltr.
optional: remote dispensing hand-set.
Contiburette, bottle top mounted electronic digital burette, hand operated version, smallest dosing
amount 10 µl, calibration and adjustment facility, battery powered, LCD, thread adaptor A 32
with adapters for A 45 and A 28.
Contiburette, bottle top mounted electronic digital burette, hand operated version, smallest dosing
amount 20 µl, calibration and adjustment facility, battery powered, LCD, thread adaptor A 32
with adapters for A 45 and A 28.
Contiburette, bottle top mounted electronic digital burette, motorized version, smallest dosing
amount 1 µl, max. flowrate 2 ml/min calibration and adjustment facility, RS 485 interface, connection
to PC with adaptor cable RS 485/RS 232 (to be ordered separately: PN 61703-00), LC display, thread
adaptor A 32 with adapters for A 45 and A 28.
Contiburette, bottle top mounted electronic digital burette, motorized version, smallest dosing amount
10 µl, max. flowrate 20 ml/min calibration and adjustment facility, RS 485 interface, connection to PC
with adaptor cable RS 485/RS 232 (to be ordered separately: PN 61703-00), LC display, thread adaptor
A 32 with adapters for A 45 and A 28.
Contiburette µ10 D, additionally with integrated piston rinsing system.
Contiburette, bottle top mounted electronic digital burette, motorized version, smallest dosing amount
20 µl, max. flowrate 30 ml/min calibration and adjustment facility, RS 485 interface, connection to PC
with adaptor cable RS 485/RS 232 (to be ordered separately: PN 61703-00), LC display, thread adaptor
A 32 with adapters for A 45 and A 28.
Contiburette µ20 D, additionally with integrated piston rinsing system.
Part No.
60294-00
60715-00
62723-00
62724-00
62730-00
62732-00
62733-00
62734-00
62735-00

Ingenieurbüro
|Liquid Handling and Pumps
and Pumps
HPLH 200VCS
HPLH 1000VS
HPLH 200PF
9 channel pump
Ceramic inside
DP 200
Pumps
Unit
DOSCA micrometering pump HPLH PCON C with remotable controllers
HPLH 20V High precision micrometering pump (ø 4 mm) encased in a coated steel housing, pump head stainless steel,
wetted parts are AL2O3 and PVDF or Tefzel, flow rate: 5 µl/min - 10 ml/min
HPLH 20VS Same as above but with rinse port, wetted parts: AL2O3 and PVDF or Tefzel
HPLH 20VCS Same as above but with special rinse port inside ceramic cylinder, “wetted“ parts: AL2O3 and PEEK or PFA
HPLH 200V High precision micrometering pump (ø 6 mm) encased in a coated steel housing, pump head stainless steel,
wetted parts are AL2O3 and PVDF or Tefzel, flow rate: 50 µl/min - 100 ml/min
HPLH 200VS Same as above but with rinse port, wetted parts: AL2O3 and PVDF or Tefzel
HPLH 200VCS Same as above but with special rinse port inside ceramic cylinder, “wetted“ parts: AL2O3 and PEEK or PFA
HPLH 300VCS Same as above (ø 8 mm), flow rate: 100 µl/min - 200 ml/min wetted parts are AL2O3 and PEEK or PFA
HPLH 1000V High precision micrometering pump (ø 10 mm) encased in a coated steel housing, pump head stainless steel,
wetted parts are AL2O3 and PVDF or Tefzel, flow rate: 250 µl/min - 400 ml/min
HPLH 1000VS Same as above but with rinse port, wetted parts: AL2O3 and PVDF or Tefzel
HPLH 20PF Pulse-free pump, flow rate: 5 µl/min–10 ml/min, wetted parts: AL2O3 and Tefzel
HPLH 200PF Pulse-free pump, flow rate: 50 µl/min–100 ml/min, wetted parts: AL2O3 and Tefzel
Multi channel Consisting of 2 up two 9 pump units in one housing. These systems are made upon customer request.
pumps Great variety of pump heads, also heatable, with different kinds of rinse ports available, dosing volumes from
1 µl/step up to 400 ml/min. Pump heads in stainless steel, or highly resistant plastics such as PEEK, PFA,
PVDF or Tefzel. Pump systems made from high grade AL2O3. RS 232-interface and daisy chaining.
Lab pump
DP 200
Description
Precise micometering lab pump with digital flowrate control, flowrate up to 20 ml/min.
Flow direction: Forward/Reverse.
3 sizes in different versions available. Please contact us for further information
Part No.
70940-00
70945-00
70947-00
70950-00
70955-00
70957-00
70967-00
70970-00
70975-00
70980-00
70985-00
617xx-xx
6176x-00
Technical details are subject to change without prior notice.

Ingenieurbüro
|Blood Cell Counter
Blood Cell Counter
RM 5
Blood Cell Counter
Unit
DIFF 15
DIFF 15PC
Description
Compact, multi-function cell counter for manual differential counting procedures, e.g. bone,
marrow, blood, 15 entry keys, % or real read out
Same as above but with RS 232 interface, including software to be used with Microsoft Windows®
Part No.
60243-00
60244-00

Ingenieurbüro
|XYZ Robot/ThirdArm/DSR
XYZ Robot (OEM) and
XYZ Robot
DSR
Dissolution Sampling Robot
XYZ Robot
Your application - our solution!
Please ask for our OEM XYZ machines. A tool changing device offers a variety of robotic handlings.
Our product specialist will assist you with detailed information
DSR
Our Dissolution Sampling Robot saves time and grants for reproducibility. Built-in pumps save a lot of bench space.
For technical and product information please contact our product specialist.
Your personal pipetting assistant fills tubes and vials with either a constant or variable amount of liquid(s).
It also collects from preparative HPLC, Flash chromatography, leaching test and other fraction collection applications.
ThirdArm and pump may be operated locally, or remotely, via a simple keypad or via PC.
Contact our product specialist for detailed information.
Technical details are subject to change without prior notice.

Interested?
Please feel free to browse and visit our website www.cat-ing.de
No. 8PR.OV.E/A01
Ingenieurbüro
M. Zipperer GmbH
D-79219 Staufen
Telefon 0 76 36/78 03-0
Telefax 0 76 36/78 03-45
info@cat-ing.de · www.cat-ing.de
Technical details are subject to change without prior notice.