Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6 Disassembling for transport<br />
For easy transportation the motor and the guide tube can be removed.<br />
6 for transport<br />
6.0 Disassembling for transport<br />
6.1 Removing For easy transportation the guide tube the motor and the guide tube can be removed.<br />
For easy transportation, the motor and the guide tube can be removed.<br />
6.1 Removing the dust tube<br />
6.1 Removing the guide tube<br />
Caution!<br />
Caution!<br />
Injury to the operator or other persons could occur or damage could occur if the machine<br />
Injury to the operator or other persons could occur or damage could occur if the<br />
starts up unintentionally. Disconnect fatal the machine from the power supply before working<br />
machine<br />
on<br />
Caution! starts up unintentionally. Disconnect the machine from the power supply<br />
the machine!<br />
before Injury to working the operator on the or other machine! persons could occur or damage could occur if the machine<br />
starts up unintentionally. Disconnect the machine from the power supply before working<br />
on the machine!<br />
0<br />
2 1<br />
1<br />
0<br />
0<br />
2 1<br />
1<br />
0<br />
Instructions:<br />
1. Instructions: Fold down the cable arm (3).<br />
Instructions:<br />
2. Move the main lifting lever (2) to the front position in order to lower the sanding<br />
1.<br />
drum<br />
Fold down<br />
to the cable<br />
floor.<br />
arm<br />
This<br />
(3).<br />
removes the load from the control rod (5).<br />
2. Move the main lifting lever (2) to the front position in order to lower the sanding drum to the<br />
1. 3. Fold Loosen floor. down This both removes the cable of the arm load wing (3). from screws the control a little rod (4). (5). Push the handle down to detach the<br />
2. 3. Move control Loosen the both rod main of (5) the lifting from wing lever screws the (2) connector a little the (4). front (8). Push position the handle in order down to detach lower the control sanding rod drum to the<br />
floor. (5) from This the removes connector the (8). load from the control rod (5).<br />
4.<br />
3.<br />
4. Open<br />
Loosen the the<br />
both<br />
guide dust<br />
of the<br />
tube tube<br />
wing<br />
support support<br />
screws<br />
(7) with (7)<br />
a<br />
the with<br />
little<br />
clamping the clamping<br />
(4). Push<br />
lever<br />
the<br />
(6)<br />
handle lever pull<br />
down<br />
the (6) guide and<br />
to detach<br />
tube pull (1) the<br />
the<br />
out. guide<br />
control rod<br />
tube (1) out.<br />
(5) from the connector (8).<br />
4. Open the guide tube support (7) with the clamping lever (6) and pull the guide tube (1) out.<br />
Pallmann <strong>King</strong> <strong>Cobra</strong> <strong>Manual</strong> 9