Overview of Product Range - Motointegrator.pl

Overview of 

Product Range

Contents 

Wheel Balancers 

Car wheel balancers 4 

ecolift universal wheel lift 12 

Truck wheel balancers 13 

Tyre Changers 

Car / motorcycle tyre changers 15 

Truck tyre changers 23 

Automotive Lifts 

Car, motorcycle and light-truck lifts 27 

Brake Testers and Test Lanes 

Car, truck and motorcycle 

brake testers and test lanes 37 

Exhaust emission analyser 43 

Wheel Aligners 

Car wheel aligners 44 

Approvals 50 

Contacts 53 

3

geodyna ® 990 

Digital wheel balancer 

Scope of application: 

small workshops and service stations 

• Motorised wheel balancer 

• Patented virtual plane measurement (VPM) technique 

• Automatic input of distance rim/machine (1D SAPE) 

• Input of rim diameter and width by pressing of the function 

key and turning of the wheel (patented) 

• Conspicuous LC display 

• Automatic pre-selection of weight locations with the easy 

ALU mode 

• Gauge arm with patented wheel weight clamp and 

adhesive weight positioning system 

• Hidden weight mode 

• PAX wheel mode 

• Automatic braking of the wheel after measurement 

• Pedal-operated main shaft lock 

• Patented optimisation mode 

• Measuring speed < 100 rpm, hence no wheel guard required 

• 4 User profiles 

Technical data and dimensions 

Rim centre bore diameter mm 43 – 116 

Shaft diameter mm 40 

Measuring speed rpm

geodyna ® 990 mot 

Motorcycle wheel balancer 

Scope of application: 

small workshops and service stations 


• Automatic input of distance rim/machine (1D SAPE) 

• Input of rim diameter and width by pressing of the function 

key and turning of the wheel (patented) 


• Gauge arm with patented wheel weight clamp 




• Including wheel guard 

• Including motorcycle wheel adaptor 




Measuring speed rpm

geodyna 4500/p 

Digital wheel balancer with LC display 

Scope of application: service stations, garages and tyre 

shops with small to medium tyre service volume 


• Automatic input of distance rim/machine and rim diameter 

(2D SAPE) 

• Input of rim width by pressing of the function key and 

turning of the wheel (patented) 



ALU mode 








• Neat weight tray 


• p version with electro-mechanical power clamp device 




Measuring speed rpm 200 

Rim width inch 1 – 20 

Rim diameter inch 8-25 

Max. wheel width mm 530 

Max. wheel diameter mm 950 

Max. wheel weight kg 70 

Dimensions (WxDxH) – 

wheel guard open mm 1265 x 1130 x 1765 

Weight kg 130/135 

Power supply 200-240V 1ph 50/60 Hz 

6

geodyna ® 4900 / 4900p 

Wheel balancer with monitor 


shops with small to medium tyre service volume 


• Automatic input of distance rim/machine; rim diameter and 

width (3D SAPE) 

• 17“ TFT flat screen 



• Automatic orientation of wheel into correction plane 

(12 h position) 





• asanetwork capability 

• User guidance via menu-controlled on-line help 

• Comprehensive on-line help in more than 20 languages 

• p version with electro-mechanical power clamp device and 

AutoStopSystem for gauge arm 






Rim diameter inch 8 – 25 








7

geodyna ® 6300-2/p 

Digital wheel balancer with LC display 


shops with medium to high tyre service volume 


• geodata gauge arm for automatic input of all wheel 

data and positioning of adhesive wheel weights with the 

patented weight clamp 



ALU mode 







• AutoStopSystem for geodata gauge arm 

• Rim lighting system 

• Ergonomic weight tray 

• Ergonomic shelves for cones and clamping means holder 















8

geodyna ® 6800 / 6800p 

Wheel balancer with monitor 


shops with high tyre service volume 


• geodata gauge arm for automatic input of all wheel 

data and positioning of adhesive wheel weights with the 

patented weight clamp 








• AutoStopSystem for geodata gauge arm 


• Convenient on-line user guidance 


• Ergonomic shelves for cones and clamping means holder 
















9

geodyna ® 6900p 

Automatic wheel balancer with monitor 

Scope of application: garages and tyre shops with high 

tyre service volume. 

• Non-contact automatic acquisition of all wheel data 

• Automatic detection of number and position of alloy rim 

spokes 

• geodata gauge arm with patented wheel weight clamp for 

positioning adhesive wheel weights 

• Electro-mechanical power clamp device 

• Rim lighting system 





• Ergonomic shelves for cones and clamping means holders 

• Compatible with asanetwork 












Weight kg 160 

Power supply 220 – 240 V, 1 ph / 50 / 60 Hz 

10 

Clamp 

Close 

Ready to go!

geodyna ® optima 

Wheel balancer and diagnostic equipment with 

non-contact laser technology 


• Non-contact data acquisition 

• TFT flat screen 


• Measurement and correction of unbalance and tyre and rim 

run-out 

• Diagnostics of unsmooth ride and improvement 

by geometric matching 

• geodata gauge arm with patented wheel weight clamp for 

positioning adhesive wheel weights 


• Tread depth indicator 

• Rim only measurement 

• Electro-mechanical power clamp device 

For more details please see www.optima-balancer.com 










Max. cycle time s 35 



Weight kg 217 


11

ecolift ® -2 geodyna 

Universal wheel centring lift for garages and tyre shops 

The ecolift-2 geodyna is a wheel centring lift which raises the 

wheel to the shaft of the wheel balancer where it is properly 

centred and clamped. 

12

geodyna ® 980L 

Truck wheel balancer 

• Automatic input of distance rim/machine and rim diameter 

(2D SAPE) 

• Input of rim width by pressing of the function key and 

turning of the wheel (patented) 

• Electronic friction brake to retain the wheel in any position 


• Weight tray with 27 weight compartments and shelves for 

car cones and weight pliers 

• Measuring speed less than 100 rpm 


• Automatic static and dynamic unbalance measurement in 

a single measuring run 

• Cone adaptor with spacer and light-truck cone of 

120 – 170 mm diameter 

• Gauge arm with patented wheel weight clamp to input 

wheel data and position adhesive weights 




Rim width setting range inch 2 – 20 

Rim diameter setting range inch 8 – 30 






Weight of machine kg 235 

Power supply 200–240V 1ph 50/60 Hz 

13 

Options: 

• Pneumatic loading device 

• Centring star

geodyna ® 4800L 

Truck wheel balancer 

Same as geodyna 980L, but 





Rim width setting range inch 2 – 20 

Rim diameter setting range inch 8 – 30 






Weight of machine kg 238 

Power supply 200–240V 1ph 50/60 Hz 

14 

Options: 

• Pneumatic loading device 

• Centring star

monty ® 1270 

Swing arm tyre changer 

Scope of application: service stations and garages with 

small to medium tyre service volume 

• Double-acting bead breaker cylinder 

• Swing arm for minimum space requirement 

• Mounting head vertically and laterally adjustable in 

spaced-apart position relative to the rim 

• Self-centring four-jaw chuck 

• Mounting tool with a plastic protection 

• Ergonomic and user-friendly arrangement of pedals 

• Quick-inflating valve 

• Outer clamping range up to 20“ 


Inner clamping range inch 12 – 22 

Outer clamping range inch 10 – 20 


Max. tyre width inch 12 


Bead breaking range mm 70 – 330 

Space requirement (HxWxD) mm 1840 x 770 x 970 

Weight kg 149 

Compressed air supply bar 8 – 10 

Power supply 3 / PE AC 380 – 415 V / 50 Hz 

15

monty ® 2300 

Tilt back post tyre changer 

Scope of application: shops with small to medium tyre 

service volume 









• Pedal-controlled tilt back post, locked in working position; 

manually tilted forwards 

• With optional easymont pro suited for handling run-flat tyre 

systems (additional optional adaptors required for PAX and 

CSR) 









Weight kg 210 



16

monty ® 3300 / 3300 GP 

Tilt back post tyre changer with pneumatically tilted post 

Scope of application: shops with medium tyre service 

volume 




• Pneumatically controlled movement of mounting head 

towards the rim 






• Pedal-controlled tilt back post, pneumatically locked in 

working position and tilted forwards 



CSR) 

• GP version: pedal-controlled tyre inflation via air ports in the 

clamping jaws and tool box with 3 compartments 









Weight kg 220 



17

monty ® 3300-2 speed / 3300-2 speed GP 

Tilt back post tyre changer with pneumatically tilted 

post and 2-speed turntable 

Scope of application: shops with medium tyre service 

volume 




• Pneumatically controlled movement of mounting head 

towards the rim 





• Pedal-controlled tilt back post, pneumatically locked in 




CSR) 

• Two turntable speeds (7 and 13 rpm) 

• Pedal controlled inflation 

• Tool box with pressure gauge fitted on separate post 

• Bead breaker blade supported in three joints 


clamping jaws 









Weight kg 220 



18

monty ® 3300 racing / 3300 racing GP 

Tyre changer for wheels up to 14“ wide 

Scope of application: shops with high tyre service 

volume 


• Mounting head vertically and laterally adjustable in spacedapart 

position relative to the rim (pneumatically controlled) 


• Mounting tool with plastic protection 




• Pneumatic tilt back post, pneumatically locked in 




CSR) 



• Tool box with integrated precision pressure gauge 

• Bead breaker blade supported in three joints 

• Bead breaker adjustable in five positions 


clamping jaws 









Weight kg 240 



19

monty ® 3550 / 3550 GP 

Tyre changer for wheels up to 30“ diameter 

Scope of application: shops with high tyre service 

volume, especially for large wheel diameters 

• With optional adaptor for wheels up to 30“ diameter 

• Including easymont pro, consequently specially suited for 

handling run-flat tyre systems (additional optional adaptors 

required for PAX and CSR) 

• Mounting head vertically and laterally adjustable in spacedapart 

position relative to the rim (pneumatically controlled) 


• Bead breaker adjustable in 2 positions 

• Tool box with integrated precision pressure gauge 


• Pneumatic tilt back post, pneumatically locked in 







clamping jaws 




(– 30“ with optional jaws) 




Bead breaking range mm 60 – 305 / 150 – 675 


Weight kg 240 


Power supply 400 VAC 3 ph 50 – 60 Hz 

20

easymont ® pro 

easymont pro is an indispensable tool for mounting 

and demounting low profile tyres and run-flat tyre 

systems 

• So that the mounting head is easily and gently positioned 

on the rim the tyre bead is retained in the drop centre of 

the rim using the easymont roller 

• When the tyre is demounted, the hold-down device forces 

the upper bead into the drop centre of the rim so that the 

upper bead can easily lifted over the mounting nose which 

facilitates demounting considerably. 

• When the upper bead is mounted, the roller retains the 

bead under the nose of the mounting head. The practical 

hold-down device turns 360 deg. with the wheel, doing the 

otherwise tedious job of the operator while preserving both 

tyre and rim. 

• Optional extra for use with monty 2300 – monty 3300 

racing tyre changers, standard on monty 3550 

• Bead breaking with the optional adjustable disc to follow 

wheel rotation dynamically, thus preserving tyre and rim 

21

monty ® PAX 

Dedicated PAX tyre changer 

• Changing PAX tyres without necessity to turn the wheel 

over 

• Simultaneous mounting and demounting of both PAX 

beads 

• Integrated wheel lift for ergonomic lifting of the wheel 

up to the machine shaft 

• Tool box for tools, cones, etc. 

• Ergonomically arranged controls 


Rim diameter mm 320 – 560 

Max. tyre width mm 330 


Motor speed rpm 8 


Weight kg 220 



22

monty ® 3650 

Truck tyre changer for mounting and demounting 

tubeless truck and bus tyres on steel or alloy rims 

• Access ramp for easy loading of the tyre changer. 

• Two rollers for bead breaking and tyre changing allow quick 

operation. Both the inner and outer beads are demounted 

in a single process. 

• The innovative design of monty 3650 ensures that the 

rollers are always centred relative to the wheel. 

• Wheels, rollers and control console are so positioned 

relative to each other to make retreading of tyres extremely 

convenient. 

• Easy control via integrated control console 

• Clamping of wheel by its centre bore via cone and wing nut 


Rim diameter inch 16 – 22.5 




Weight kg 330 

Drive motor rating kW 0.75 

Hydraulic motor rating kW 0.75 


23

monty ® 3850 

Truck tyre changer to mount and demount tubed and 

tubeless tyres of trucks and buses from drop centre and 

split ring rims 

• Electro-hydraulic drive 

• Mobile control unit 

• Positioning of wheel and tool within a wide accurate 

adjustment range 

• Infinitely self-centring universal hydraulic chuck 

• Bead breaker roll and mounting/demounting tool fitted on 

swing arm 

• Safety bracket prevents wheel from tilting 

• Safety valve on chuck prevents accidental unclamping of 

wheels 

• Ergonomic operation owing to vertically adjustable control 

unit 






Weight kg 550 

Drive motor rating kW 1.8 



24

monty ® 4400 

Truck tyre changer for tyre shops to mount and 

demount tyres of utility vehicles and earth moving 

machines 

• Rugged chuck design 

• Double reinforced frame allowing to handle wheels of 

up to 1500 kg 

• Unique patented bead breaker disc for easy operation 

• Control unit with switch to control two operations 

simultaneously 

• 2 Chuck speeds, preset with a switch 

• Vast range of standard accessories 


Rim clamping range inch 14 – 44 

Rim clamping range incl. 

extension (option) inch 44 – 56 

Max. wheel width inch (mm) 43 (1100) 

Max. wheel diameter inch (mm) 90.5 (2300) 

Bead breaking effort kN 33 

Chuck speed rpm 4 / 8 

Chuck motor rating kW 1.5 / 2.2 




Weight kg 1035 


25

monty ® 5800 B / BA / WL 

Universal truck tyre changer for rim diameters of 4“ – 58“. 

monty 5800B 

• Extremely wide clamping range for rims of 4“ – 58“ without 

extensions 

• High bead breaking force of up to 3.8 t 

• Rugged design for intensive handling of wheels of up to 

2000 kg and 2.5 m diameter 

• Lowering of chuck to 350 mm to facilitate accommodation 

of rims of small diameter 

• Long jaws to accommodate rims of high offset 

• Accommodation of rim flanges of up to 40 mm thick 

• Control console with switch for simultaneous control of two 

functions 

• 2 chuck speeds to be preset by switch 

• Connecting cable between machine and control unit 

monty 5800BA 

Same as monty 5800B, but control unit ergonomically fitted 

on boom on machine 

monty 5800WL 

Same as monty 5800B, but additionally: 

• radio controlled operation 

• automatic operation of mounting tool and preset tool 

carriage travel 


Max. wheel width inch/mm 59/1500 

Max. wheel diameter inch/mm 95/2500 


Rim clamping range inch 4 – 58 

Bead breaking force kN 38 

Chuck speed rpm 4 or 8 

Chuck motor rating kW 2.2 – 3.0 


Space requirement (HxWxD) mm 2000x2100x2960 

Weight kg 1400 

Power supply 230 / 400 3 ph 50 Hz 

26

duolift ® GTE 2500 

Two-post lift for garage and tyre shop, designed to lift 

cars, vans and light trucks up to 2500 kg 

• With base frame 

• Rated load capacity 2500 kg 

• Asymmetrical design, car door access on two sides 

• Automatic arm locks 

• Low pick-up height 

• Electro-mechanical drive 

• Rugged long-life column profile 

• Rolled-thread lifting spindles 

• Power supply 3/PE AC 50 Hz, 380-415V 

• Width 3260 mm 

• Max. lifting height 1965 mm 

• Including 4 pick-up pads vertically adjustable from approx. 

105 – 165 mm, 120 mm dia. 

• Including automatic lubrication system 


Rated load capacity kg 2500 

Width mm 3260 

Max. lifting height mm 1965 

Power supply 3 / PE AC 50 Hz, 380 – 415 V 

27

duolift ® BT 2500 


cars and vans up to 2500 kg 







• With crossbeam, for perfect ground clearance 


105 – 165 mm, 120 mm dia. 




Width mm 3010 



28

duolift ® BTE 3200 


cars and vans up to 3200 kg 

• With crossbeam, for perfect ground clearance 




• Electro-mechanical drive via two motors 

• Specially rolled column profile 



125 – 195 mm, 120 mm dia. 




Width mm 3250 



29

duolift ® MTF 3000 / 3000-2 

Two-post lift for cars, vans and light trucks up to 3000 kg 








• Without base frame 


duolilft MTF 3000 


98 – 140 mm, 120 mm dia. 

• Two mechanically synchronised drive motors 

duolift MTF 3000-2 

Same as duolift MTF 3000, but 


80 – 105 mm, 120 mm dia. 

• Finish RAL 7015 

• 1 x 230 VAC, 1 x compressed air supply 

• Tool tray, impact wrench holder 

• OEM version 



Width mm 3200 



30

duolift ® MSE 5000 


cars, vans and light trucks up to 5000 kg 

duolift MSE 5000 

• Without base frame 

• Symmetrical design 


• Electro-mechanical drive via two synchronised motors 

• Including vertically adjustable pick-up pads 




Width mm 3660 


Vertical clearance mm 4200 – 5000 

Power supply 3 / N / PE AC 50 Hz, 380 – 415 V 

31

shortlift ® 2500-4 

Mobile short-stroke lift with 2.5 t rated load capacity 

• The lift is quickly and conveniently relocated using the 

practical pole with caster wheel 

• Galvanised pad plates and drive-on / drive-off ramps 

• Ramps fpr quick adjustment of length 

• No compressed air supply is required, consequently the lift 

can be installed everywhere in the shop 

• The mobile control console is easily relocated to an 

optimum position 

• Two lifting cylinders at each scissor ensure smooth and 

uniform lifting operation and high reliability 


Drive-over height mm 108 

Accommodation length mm 1530 – 2000 


Lifting time s 25 

Weight incl. hydraulic unit kg 500 


32

variolift ® 3000-4 

Double-scissor lift with 3.0 t rated load capacity 

• Owing to the lifting height of as much as 1.90 m the lift is 

ideally suited for under-car work 



• The mobile control console is easily relocated to an 

optimum position 

• Hydraulic distributor and two cylinders on every lift side 

ensure smooth and uniform lifting operation and high 

reliability 

• The pad plates are telescoped and allow an easy extension 

of the lift 

• The lift is surface-mounted and provided with drive-on 

ramps 


Drive-over height mm 115 

Accommodation length mm 1540 – 2100 





33

servicelift ® 4000-2 SL / FL / AL / AFL 

Scissor lift with 4.0 t rated load capacity for service work 

servicelift 4000-2 SL 

• Runway-type lift for service work 

• Flat structure with increased stiffness 

• Synchronisation via double cylinders 

• Levelling of runways 

• Surface-mounted design 

• Fastening means, drive-on ramps, rails for jacking beam, 

and hydraulic oil included in delivery 

servicelift 4000-2 FL 

This version is equipped with an additional wheel lift with 

4.0 t rated load capacity 

servicelift 4000-2 AL 

This lift is provided with recesses for front turntables and 

with integrated slip plates so that it is specially designed for 

alignment work 

servicelift 4000-2 AFL 

This professional lift comes complete with an additional wheel 

lift, with recesses for front turntables and with integrated slip 

plates. 

• All models are also available as flush-mounted version 


Accommodation length mm 4800 





34

quattrolift ® 4000 S / SL 

Four-post lift for check-in, repair and wheel alignment, 

rated load capacity 4000 kg 

• Runway-type lift 

• Hydraulic drive 

• Cylinder fitted under runway 

• Wire-rope transmission 

• Electro-mechanical safety system 

• Including fastening means 

quattrolift 4000 S 

• Lateral rails for jacking beam 

• Overall length incl. drive-on ramps 5640 mm 

• Adjustable notched bars for wheel alignment 

• Inside width between posts 2820 mm 

quattrolift 4000 SL 

• Overall length incl. drive-on ramps 6140 mm 

• Inside width between posts 2970 mm 


4000 S 4000 SL 

Rated load capacity kg 4000 4000 

Lifting time sec 30 30 

Lifting height mm 1800 1800 

Length of runways mm 4300 4800 

Width mm 3160 3310 

Drive-on height mm 135 155 

Weight kg 930 980 

Drive rating kW 2.2 3 

Power supply 3 / PE AC 230 – 400 V 50 Hz 

35

motolift ® 2 

Scissor lift for the motorcycle shop 

• Compact and space saving – hence perfectly suited even for 

confined spaces 



• Optimum lifting height for ergonomic work 

• Front wheel clamp to locate the wheel 

• Opening in platform for convenient demounting 

of rear wheel 


Platform width mm 715 

Platform length mm 2155 




36

ekon ® 2000 

Roller brake tester for cars and light trucks up to 3 t 

axle load 

• Non-contact vehicle identification by means of sensors 

• No feeler rolls 

• Rimguard technology 

• Intelligent cut-out at wheel lock 

• Analogue display: double scale with scale range 0 – 6 kN 

• One-part self-supporting galvanised roller set 

• 15 m cable set 

• Diagnostic electronic unit integrated in roller set 

• Motor rating 2 x 2.5 kW 

• Idling speed 3.3 km/h 

• Splash-proof motors 

• Electro-automatic drive-off aid 

• Automatic test sequence 

Alternative configuration: 

brekon 2000 PC version 

37

ekon ® 141-3 

Roller brake tester for cars and light trucks up to 3 t 

axle load 

• Analogue display: scale range 0 – 6 kN 








• Interface for printer / PC 

• Can be upgraded into complete test lane 

• Can be upgraded for 4WD tests 


brekon 141-4 up to 4 t axle load – analogue display 0-8 kN 

brekon 141-3 and brekon 141-4 with rollers 1000 mm long 

brekon 141-3 and brekon 141-4 PC version 

brekon 141-3 and brekon 141-4 with brake motors 

38

safelane ® pro II – PC 4 

Test lane for cars and light trucks up to 4 t axle load, 

PC version 

• Control unit integrated in PC cabinet 

• PC user software 

• Database to store all customer and vehicle data 

• Modular design 

• Manual and automatic test sequences 


Brake tester: 







Eusama-type suspension tester 

• Motor rating 3 kW 

• Dynamic evaluation of vibratory behaviour of vehicle 

• Eusama-type 

• Resonance-type 

or resonance-type suspension tester 


• Displacement measurement 

Side-slip tester 

• Quick diagnostics of side-slip 

• Determination of toe-in and toe-out 


safelane pro II – PC 3 up to 3 t axle load 

safelane pro II – Analogue 3 up to 3 t axle load 

with analogue display 0 – 6 kN 

safelane pro II – Analogue 4 up to 4 t axle load 

with analogue display 0 – 8 kN 

39

ekon ® 40 

Platform brake tester for vehicles with low-bed sports 

chassis or 4WD up to 4 t axle load 

• 8-digit LE display 

• Two or four galvanised test platforms with expanded metal 

mesh welded upon 


• Test platforms 2000 mm long 


• Determination of braking force and braking force imbalance 

• Braking force 9.99 kN/wheel 

• No restrictions for 4WD tests 

• Tests on vehicles with low-bed sports chassis 

• Brake tests simulate road tests 

Configuration: 

• Flush-mounted, or surface-mounted 

(incl. drive-on / drive-off ramps) 

• brekon 40-S for minimum space requirement, test platforms 

1000 mm long, surface-mounted design 

• Test lane configuration: safelane eco PC version 

40

safelane ® truck 

Roller brake testers for trucks and buses 

for 6 t, 10 t, 13 t, 15 t, 16 t, 18 t and 20 t axle load 

• Analogue display 

• Galvanised roller set 





• Automatic switching over between car and truck mode 


• Optional side-slip tester tractest 4000 

• Optional load simulator NSV 4000 

• Optional 4WD mode 


safelane truck with 2 test speeds 

safelane truck with brake motors 

41

safelane ® bike K 

Roller brake tester for motorcycles 

• Analogue display 



• Motor rating 2.5 kW 


• Rollers 300 mm long 

• Splash-proof motor 

• Determination of rolling resistance (tight brake) 

• Determination of ovality (drum / disc) 

• Cut-out at wheel lock 


safelane bike B - PC-Version, electronic unit housed in E box 

42

multitest C 

Emission analyser for petrol and diesel engines 

• multitest C consisting of emission analyser multitest and 

smoke meter (trolley is optional) 

• Suitable for emission analysis in line with national standards 

• E-OBD for emission analysis 

• CO, HC, CO², O² measurement, optional NOx, 

Lambda calculation 

• Petrol engine: speed measurement via RPM sensor, or RPM 

antenna 

• Oil temperature measurement with oil temperature sensor 

• Smoke meter for partial current measurement 

• User guidance via colour display 

• Input of customer and vehicle specific data 

• Automatic warning when maintenance is due 

• 4 Interfaces RS-232 

• Internal data printer 

• Compatible with asanetwork (optional) 


Emission analyser in stand-alone version: 

multitest B for petrol engines 

multitest D for diesel engines 

43

geoliner ® 460 

6-sensor CCD car wheel aligner 

• Long-life reliable wheel unit with 6-sensor technology 

• Mobile standard terminal with shelf for printer and 

compartment for PC plus additional storage space; 

17“ TFT flat screen 

• Set of 4 high-performance wheel clamps 11“– 22“ 

• Set of 2 spoiler adaptors 

• PC with Windows operating system 

• Colour printer 

• Power supply 230 V 50/60 Hz 

• Complete and up-to-date specs 

• Simultaneous reading of caster, camber and toe on the 

monitor 

• On-line help with 3D animated graphics 

• Customer database 

• EZ Toe ® for easy and convenient settings at maximum 

steering angle 

• A-arm adjustment 

• Standard accessories: Steering wheel holder, 

brake pedal lock, IR remote control 

44

geoliner ® 480 / R 


• Long-life reliable wheel units 

• Mobile terminal with drawer for printer and compartment 

for PC plus additional storage space; 17“ TFT flat screen 

• Set of 4 high-performance wheel clamps 11“ – 22“ 







monitor 






• R version with cordless communication 



45

geoliner ® 482 / R 


• Long-life reliable wheel units 



• Set of 4 high-performance wheel clamps 11“ – 22“ 






• Integrated OEM-Procedures 

• Advanced ride height measurement 


monitor 





• EZ Access ® for measurement with demounted wheels 

• Cradle adjustment 



• R version with cordless communication 



46


3D car wheel aligner 

• With dual tall supports / centre tall support (1.2 m work level), 

or dual short supports / centre short support (pit version); 

lift version incl. lifting equipment (work level 0 – 2.0 m) 



• Set of 4 targets with high-performance wheel clamps 

11“ – 22“ 

• PC with Windows operating software 



• Simple operation and quick accurate measured results 

• Complete and up-to-date OEM specs 

• Measurement screen with all relevant data 

• Automatic measurement of vehicle dimensions 


• 3D overall display 



• Cordless communication between targets and camera system 



47


3D car wheel aligner 

• With dual tall supports / centre tall support (1.2 m work level), 

or dual short supports / centre short support (pit version); 

lift version incl. lifting equipment (work level 0 – 2.0 m) 




11“ – 22“ 

• PC with Windows operating software 





• Integrated OEM procedures 










• Optional TIP (target imaging pointer) for ride height 

measurement 



48


3D 3-camera wheel aligner 

• 2 independent camera towers with self-synchronising 

cameras, ideally suited for drive-through solutions. 




11“ – 22“ 




• Self-calibrating 



• Integrated OEM procedures 










• Optional TIP (target imaging pointer) for ride height 

measurement 



49

Approvals 

Machines, optional extras and accessories of Hofmann have 

been approved, or are listed in the catalogues of many car 

and tyre manufacturers. 

Car maker approvals 

BMW 

geodyna 4300 

geodyna 4801 

geodyna 6300 

geodyna 6300p 

geodyna 6800p 

monty 2300 

monty 3300 2-speed 

monty 3300 racing 

easymont pro 

monty PAX 

PAX-adapter for 

easymont pro 

Citroën 

geodyna 6300 

monty 3300 

Chrysler / Dodge / Jeep 

geoliner 482 

Ford 

monty 2300 

monty 3300 

monty 3300 GP 


monty 3300 2-speed GP 


monty 3300 racing GP 

easymont pro 

geoliner 480 

geoliner 480R 

geoliner 482 

geoliner 482R 

geoliner 680 with 2 tall 

supports 

geoliner 680 with 2 short 

supports 

geoliner 680 lift 

geoliner 780 

50 

Honda / Acura 

geodyna 6300 

geodyna 6300p 

geodyna 6800 

geodyna 6800p 

duolift MTF 3000 

Jaguar 

geoliner 480 

geoliner 480R 

geoliner 482 

geoliner 482R 


supports 


supports 


geoliner 780 

Land Rover 

geoliner 480 

geoliner 480R 

geoliner 482 

geoliner 482R 


supports 


supports 


geoliner 780 

Mercedes-Benz 

geodyna 6300 

geodyna 6300p 

geodyna 6800 

geodyna 6800p 

monty 2300 


monty 4400 

easymont pro

Approvals 


easymont pro 

duolift BT 2500 DC 

duolift MTF 3000 DC 

duolift MSE 5000 DC 

variolift 3000-3 DC 

servicelift 4000 A DC 

geoliner 482-MB 

geoliner 482R-MB 

geoliner 680-MB with 

2 tall supports 

geoliner 680-MB with 

2 short supports 

680-MB lift 

geoliner 780-MB 

Opel / Vauxhall 

geodyna 4300 

geodyna 6800 

monty 2300 

easymont pro 

duolift GTE 2500 

geoliner 482 OPEL 

geoliner 482R OPEL 

geoliner 680-OPEL 

geoliner 780-OPEL 

Peugeot 

monty 2300 

monty 3300 GP 

Porsche 

geodyna 6300 

geodyna 6300p 


easymont pro 

Renault 

geodyna 4300 

geodyna 6300 

monty 3300 

easymont pro 


easymont pro 

geoliner 482 

geoliner 482R 

geoliner 680 mit with 2 tall 

supports 

51 


supports 


geoliner 780 

Rover 

geoliner 480 

geoliner 480R 

geoliner 482 

geoliner 482R 

Toyota / Lexus 

geodyna 6300 

geodyna 6300p 

geodyna 6800 

geodyna 6800p 



VW / Audi / Seat / Skoda 

VAS 6307 (geodyna 4300) 




VAS 6311 (geodyna optima) 

VAS 6312 (monty 2300) 

VAS 6313 

(monty 3300 2-speed) 

VAS 6314 

(monty 3300 racing) 

VAS 6315 (monty PAX) 

VAS 6312-1 (easymont pro) 

monolift ME 2.0 

duolift BTE 3200 


Volvo 

geodyna 6300p 

geodyna 6800p 

monty 1270 

monty 2300 


geoliner 480 

geoliner 480R 

geoliner 482 

geoliner 482R

Approvals 

Tyre manufacturer approvals 

Continental 

monty 2300 

monty 3300 

monty 3300 GP 


monty 3300 2-speed GP 


monty 3300 racing GP 

Michelin 

monty PAX 

52

Your Contacts 

Sales International 

Mr Hans-J. Rupp 

Director Sales & Service 

E-Mail: hans.rupp@snapon.com 

Mrs Ute Knorr 

Assistant 

Phone : (0) 6157 / 12 – 450 

Fax: (0) 6157 / 12 – 229 

E-Mail: ute.knorr@snapon.com 

Area Sales Manager 

Mr Alain Dubois 

Mobile: (6) 11 472 371 

E-Mail: alain.dubois@snapon.com 

Mr Valerius Gerner 

Mobile: (0) 173 / 34 828 44 

E-Mail: valerius.gerner@snapon.com 

Mr Luca Pivetti 

Mobile: 335 / 77 44 729 

E-Mail: luca.pivetti@snapon.com 

Mr Marco Saccani 

Mobile: 335 / 59 143 77 

E-Mail: marco.saccani@snapon.com 

Mr Ted Sakoh 

Mobile: 90-1405-3106 

E-Mail: t.sakoh@snapon.co.jp 

Mr Norbert Schneider 

Mobile: (0) 171 / 62 616 55 

E-Mail: norbert.schneider@snapon.com 

Mr Fabrizio Valentini 

Mobile: +39 335 5 7312 22 

E-Mail: fabrizio.valentini@snapon.com 

53

Your Contacts 

International Customer Support 

Mr Riccardo Poschi 

Phone: +39 0522 733 547 

E-Mail: riccardo.poschi@snapon.com 

Mr Hylton Brown 

Phone: +49 (0) 5692 / 9942 90 

Fax: +49 (0) 5692 / 9943 80 

E-Mail: hylton.brown@snapon.com 

Mr Manuel Cancela 

Phone: +33 1 34 48 58 78 

E-Mail: manuel.cancela@snapon.com 

Mr Stefano Muzzioli 

Phone: +39 0522 733 411 

E-Mail: stefano.muzzioli@snapon.com 

Customer Support Garage Equipment 

Mrs Nadia Verona 

Fax: +39 0522 733 478 

E-Mail: nadia.verona@snapon.com 

Customer Support Spare Parts 

Mrs Sabina Santolin 

Phone: +39 0522 733 471 

E-Mail: sabina.santolin@snapon.com 

54

Your Contacts 

Marketing & Communication 

Fax: +49 (0) 6157 / 12 - 496 

Mrs Judith Huppert 

Manager Marketing & Communication Europe 

Phone: +49 (0) 6157 / 12 - 290 

E-Mail: judith.huppert@snapon.com 

Mrs Ulrike Keller 

Assistant Marketing & Communication Europe 

Phone: +49 (0) 6157 / 12 - 400 

E-Mail: ulrike.keller@snapon.com 

55

Notice 

Wuchten 

56

Notice 

Wuchten 

57

France 

Snap-on Equipment France 

ZA du Vert Galant · 15, rue de la Guivernone BP7175 · 95310 Saint-Ouen-L’Aumône 

Phone: +33 (0) 134/48 58-78 · Fax: +33 (0) 134/48 58-70 · www.snapon-equipment.fr 

Germany 

Snap-on Equipment GmbH – Undercar · Werner-von-Siemens-Str. 2 · 64319 Pfungstadt 

Phone: +49 (0) 6157/12-0 · Fax: +49 (0) 6157/12-286 · www.snapon-equipment.de 

Italy 

Snap-on Equipment s.r.l. · Via Prov. Carpi, 33 · 42015 Correggio (RE) 

Phone: +39 0522/733-411 · Fax: +39 0522/733-410 

United Kingdom 

Snap-on Equipment Ltd. · 48 Sutton Park Avenue · Reading RG6 1AZ 

Phone: +44 (0) 118/929-6811 · Fax: +44 (0) 118/966-4369 · www.hofmann.co.uk 

EMEA-JA 

Snap-on Equipment s.r.l. · Via Prov. Carpi, 33 · 42015 Correggio (RE) 

Phone: +39 0522/733-483 · Fax: +39 0522/733-479 · www.hofmann-ge.com 

Part of the machines is illustrated with optional extras available at extra cost. 

Technical modifications reserved. 

Cod.: 9402 025 · 04/2008 · Printed in Germany

Overview of Product Range - Motointegrator.pl

Create successful ePaper yourself

Delete template?

Save as template?