MT Parts Update.book - Walker Mowers

ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Rear Body Assembly (GHS Models)
1 7190-3 Insulation Foam Pad (5 x 20) 1
2 8082 Heat Shield 1
3 8515-10 Catcher Reinforcing Plate 2
4 8515-3 Catcher Support Frame 1
5 7190-2 Insulation Foam Pad, RH 1
6 7190-1 Insulation Foam Pad, LH 1
7 7145 Gas Spring Assembly 1
(Includes Items # 9 & 10)
8 8389-2 Splash Guard with Mat 1
9 7147 Spring Clip 2
10 7146 13mm Ball Stud 2
11 8105-1 Rear Body Panel 1
12 8389-12 Rubber Mat (3 x 3) 1
10
REAR BODY ASSEMBLY (GHS MODELS)
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Fasteners
F002 10-24 Keps Nut 13
F004 1/4-20 Keps Nut 5
F009 5/16-18 Whiz Locknut 2
F025 10-24 x 3/8 PPHMS 8
F026 10-24 x 1/2 PPHMS 4
F027 10-24 x 5/8 PPHMS 1
F031 1/4-20 x 5/8 Hex Bolt 2
F032 1/4-20 x 3/4 Hex Bolt 3
F085 3/16 Rivet Backup Washer 1
F178 1/4 x 1 Fender Washer 1
NOTE: Rear Bumper Assembly for GHS Models is not shown
here. Refer to BODY / CHASSIS ASSEMBLY (GHS
MODELS) MT, Page 4.
Use only genuine Walker ® replacement parts. Effective Date 01-31-03