ICCE-19 July 24-30, 2011 Shanghai, China - icce-nano.org

ICCE-19 July 24-30, 2011 Shanghai, China 

July 24, 2011 Sunday night reception andc registration 7:00PM-9:00PM 

July 25, 2011 Monday Keynote Lectures, 8AM-12:45PM 

Chairs: H.U. Habermeier, J. Nogues 

Globalization of Education and Research (opening speech) Kendall T. HARRIS (Dean of Engineering, Prairie View A&M U., Texas) 8:00AM-8:15AM 

A Few Interesting Size-Scale Problems Of Low-Dimentional Ferroelectric Materials Daining FANG (Peking U., China) 8:15AM - 8:45AM 

Advanced Continuous Nanofibers And Structural Supernanocomposites: Status And Prospects Yuris DZENIS (U. Nebraska-Lincoln) 8:45AM-9:15AM 

Status In The Growth Of Anisotropic Oxide Thin Films And Heterostructures For Future Electronics Kazuhiro ENDO (Kanazawa I.T. Japan) 9:15AM-9:45AM 

Carbon Nanopaper Enabled Structural And Multifunctional Nanocomposites Jihua GOU (U. Cen. Florida) 9:45AM-10:15AM 

Chairs: K.T. Haris, L. Feo 

Complex Oxide Interfaces – A Tool To Design New Materials Hanns-Ulrich HABERMEIER (Max-Planck-Inst. Stuttgart, Germany) 10:15AM-10:45AM 

Directions For Hypersonic Thermal Protection Systems And Materials Severed At Ultra- High-Temperature Environment Jiecai HAN (Harbin I.T., China) 

Novel Structural And Magnetic Effects In Passivated Antiferromagnetic Transition Metal Monoxides: Inverted Antiferromagnetic (AFM)/Ferrimagnetic (FIM), 

Core/Shell Nanoparticles Josep NOGUES (UAB, Bellaterra, Spain) 11:15AM-11:45AM 

Advancement of Basalt Fibers towards Structural Applications Zhishen WU (Southeast U., Nanjing, China and Ibaraki, Japan) 11:45AM-12:15PM 

Multiple Levels, Scales And Functions In Micro/Nano Structures Of Dragonfly Wing Veins Zheng ZHONG (Tongji U., Shanghai, China) 12:15PM-12:45PM 

12:45PM-2:15PM LUNCH 

Session 1a MATH 1 

Monday 2:15PM-4:45PM Ballroom 1 

Chairs Q. Gao, B. Tian, G. Westin, K.C. Chuang 

A Precise Numerical Method for Surface 

Waves in a Layered Space Q. GAO, W.X. 

Zhong (Dalian U.T., China) 

Theoretical Analysis And Numerical Modeling 

Of Elastic Wave Propagation In Honeycomb- 

Type Periodic Structures Biyu TIAN, Bing 

Tie, Denis Aubry (Ecole Centrale Paris, France), 

Xianyue Su (LTCS, Prking U., China) 

Scalable Solution Based Processes To Energy 

Materials Gunnar WESTIN, Annika Pohl, Åsa 

Ekstrand (Uppsala U., Sweden), Kjell Jansson 

(Stockholm U., Sweden) 

In-Plane Dynamic Displacement Measurement 

Using A Pointwise Fiber Bragg Grating Sensing 

System Kuo-Chih CHUANG (Zhejiang U., 

Hangzhou, China), Chien-Ching Ma (Nat. Taiwan U., 

Teipei) Mon-Tues 

Nonlinear Thermo-Mechanical Responses Of Smart 

Skin Sturctures Kwang-Kyu YOO, Ji-Hwan Kim 

(Seoul Nat.U., S. Korea) Mon-Tues 

Hygrothermal Effects On The Structural Behaviors 

Of Functionally Graded Plates Chang-Yull LEE, Ji- 

Hwan Kim (Seoul N.U., S.Korea) Mon-Tues 

Effects Of Cutout Shapes On Postbuckling 

Response Of Quasi-Isotropic Laminate Under 

Combined In-Plane Loads Dinesh KUMAR, S.B. 

Singh (Birla I.T.,and Sci., India) Mon-Tues 4PM 

An Effective Flaw Model On Analyzing Nanofiller 

Agglomeration In Nanocomposite Materials L. 

Roy XU, Arun Krishnan (U. Texas-El Paso) Mon-Tues 

Session 1d BIO 1 

Monday 2:15PM-4:45PM Dalian Room 

H. Bao, P.C. Chen, S. Kambo, Jinhai Yu 

Simulation For Exogenous Microbial Depolymerization Of 

Polyethylene Glycol Hongmei BAO, Masaji Watanabe (Okayama U., 

Japan), Fusako Kawai (Kyoto I.T., Japan) 

Searching for the Optimum Conditions of NLC-Sunscreen Formulae 

by Using Taguchi’s Method Pao-Chi CHEN, H.C. Chen, J.W. Huang 

(Lunghwa U.Sci.Tech., Taoyuan), J. Pang (Taiwan AC Sci. Inc., 

Taoyuang) 

Citric Acid As An Effective Release Retarding Agent In Matrix Tablets 

Formulation Sunil KAMBOJ (M.M. Univ., Ambala, India), G.D. Gupta (Punjab, 

India), Suman Kamboj, Anroop B. Nair, Sumeet Gupta, Vipin Saini (M.M. Univ., 

India) 

Engineering of a Novel Pluronic F127/Graphene Nanohybrid for Drug Delivery 

Jinhai Yu (Qingdao U. Sci.Tech., China), Haiqing Dong, Yongyong LI (Tongji U. 

Shanghai, China) 

Human Bone As Composite Material M.E. Aksoy (Min. of Health, Istanbul, 

Turkey), I. Kutbay, M. Usta (Gebze I.T., Turkey), C. Bindal (Sakarya U.), A. Gul 

(Istanbul T.U.), A. Hikmet UCISIK (Bogazici U., Bebek- Istanbul, Turkey) 

Diagrams For Quasi-Brittle Fracture Of Bimaterial V.M. KORNEV, V.D. 

Kurguzov, N.S. Astapov (Novosibirsk, Russia) Preparation And Characterisation 

Of Hydrophilic/Hydrophobic Composite Scaffolds Chengdong JI, Xia Zhong (U. 

Sydney, Australia), Sergei G. Kazarian (U. College, London, UK), Andrew Ruys, 

Fariba Dehghani (U. Sydney) Mon-Wed 

Session 1b MAGNETIC 1 


Chairs: C. Ke, D.S. McLachlan, V. Kudrle, S.K. Bose 

Preparation And Magnetization Of Iron Nanowire 

Arrays With Different Configurations C. KE 

(Southwest Jiaotong U., Chengdu, China), C.H. Cheng 

(U. NSW, Sydney, Australia), G.X. Yang (SWJTU), 

Y. Zhao (SWJTU, and U. NSW) 

Percolation Behavior in the Magnetic Permeability 

and Conductivity of Conducting Magnetic - 

Insulating Non Magnetic Binary Composites David 

S. McLACHLAN (U. Stellenbosch, S.Africa), T B 

Doyle (Faure, S. Africa), Godfrey Sauti.(Hampton, 

VA) 

Versatile Pecvd Process For Preparation Of Iron- 

Based Magnetic Nanoparticles P. Zelina, O. Jasek, V. 

KUDRLE (Masaryk U., Brno, Czech Rep.), B. David, 

N. Pizúrova (ASCR, Brno, Czech Rep.), D. Hemzal 

(Masaryk U., Brno) 

Magnetism And Electronic Transport in 

(Cu,Ni)2MnSn Heusler Alloys Under Ambient And 

Elevated Pressures S.K. BOSE (Brock U., Ontario, 

Canada), J. Kudrnovsky, V. Drchal (Czech Acad Sci, 

Prague) 

Magnetism and Half-Metallicity Of Some Cr-based 

Alloys And Their Potential For Application In 

Spintronic Devices Yong LIU (Yanshan U., Hebei, 

China), Shyamal K. Bose (Brock U., Ontario, Canada) 

Temperature Behavior Of Light Scattering by 

Ba2NaNb5O15 Crystal S. IVANOVA (Lebedev Phy. 

Inst. RAS, Moscow, Russia) Formation Of CuxO 

(x=1, 2) 

Nanowires By Thermal Annealing Copper Film 

Deposited On Ti/Si Substrate Yao WANG, Ruiqi 

Shen, Yinghua Ye, Yan Hu, Peng Zhu (Nanjing U. 

Sci.Tech., China) 

Session 1c INFRA 1 


Chairs: H.Y. Jeon, Na Wang, J.Y. Wu, H.S. Ahn 

Dependence Analysis Between Stress Crack 

Resistances And Long-Term Performance Of 

HDPE Geomembrane Han-Yong JEON, 

SuKyung Kim, JuHee Park (Inha U., S. Korea) 

Structural Health Monitoring and Next 

Generation SCADA Of Pipes Network 

Retrofitted With FRP Composites 

Ayman MOSALLAM, M. Shinozuka 

(UC Irvine, Calif.) 

Study of Coaxial Connecting Methods of FRP 

Rebars with Winding Fiber Cloth Composites 

G.Q. YUAN, G. Dong, J. Ma (Tongji U., 

Shanghai, China), Luciano Feo (U. Salerno, 

Italy), David Hui (U. New Orleans) 

Investigation Of Natural Rubber Composites 

With Addition Of Mesoporous MCM-41 

Fillers Na WANG, Xiangzhou Wang, Jing 

Zhang, Qinghong Fang (Shenyang U. Chem. 

Tech., China), David Hui (U. New Olreans) 

Durability Study Of BFRP Bars Immersed In 

Water And Alkaline Solution Jingyu Wu, 

Guijun XIAN, Hui Li (Harbin I.T., China) 

Dynamic Characterization Of A Delaminated 

Ship Deck Plate Ionel Chirica, Elena-Felicia 

Beznea (U. Galati Romania), David Hui (U. New 

Orleans) 

Session 1e GENERAL 1 

Monday 2:15PM-4:45PM Hangzhou Room 

Chairs: W. Gennari, F. Rumiche, J .Ihm, A.A. Kadir 

Epoxy Granite Toolholders for Turning Applications Walter GENNARI 

(U. Brasilia, Brazil) 

Double-Walled Carbon Nanotube Structured Hydrogen Sensors 

Francisco RUMICHE (Pontificia U. Catolica Peru, Lima), H.H. Wang 

(Argonne N.L., IL), J.E. Indacoche (U. Illinois Chicago) 

Hydrogen Storage In Metal-Decorated Nanostructureed Materials 

Jisoon IHM, Keunsu Choi, Jaehyun Bae, Changwon Park (Seoul Nat U., S. 

Korea) Mon-Tues before 3PM 

Microstructure Analyses On The Effect Of Incorporating Cigarette 

Butts In Fired Clay Bricks Aeslina Abdul KADIR (UTHM, Johor, 

Malasia), Abbas Mohajerani (RMIT, Melbourne, Australis) Mon 

An Investigation On The Tribological Properties Of Over Deformed Al/SiCP 

Composites M. Baki KARAMIS, F. Nazlı Sarı, Veysel Erturun (Erciyes U., Turkey) 

Mon-Tues noon 

Synthesis of TeO 2 nanowires by simple thermal oxidation of Te 

Nanowire Changzeng YAN, Dae Joon Kang (Sungkungkwan U., 

Suwon, S. Korea) 

Computation And Stereographic Visualization Of Temperature And 

Heat Flux In A Thermal Barrier Coating Of A Turbine Blade 

Stephen Akwaboa, S. Kodiyalam, Amitava JANA, P. Mensah, R. Diwan 

(Southern U. Baton Rouge, LA) Mon-Tues

Short Break 4:45-5:00PM 


Monday 5:00PM-7:30PM Ballroom 1 

Chairs: L.Zhao, W. Qiu, J. Majak, A. Alonso 

Study On Dielectric Properties Of CNF/Pei 

Composites Lijie ZHAO, Gang Sui, Xiaoping 

Yang (Beijing U. Chem Tech., China) 

Buckypaper (Carbon Nanotube Film) as 

Mechanical Sensor by Micro-Raman 

Spectroscopy Wei QIU, Yi-Lan Kang, Wei- 

Lin Deng, Qiu Li (Tianjin U., China) 

Ballistic Properties Of Polymer Matrix 

Composites And Ceramic Plates Used In 

Armor Design Mehmet COLAKOGLU (U. 

Pretoria, S. Africa), Omer Soykasap (Afyon 

K.Univ., Turkey) 

Stationary Of The Strain Energy Density In 

Anisotropic Solids Juri MAJAK, Meelis 

Pohlak (Tallinn U.T., Estonia) 

Electrohydrodynamic Generalized Dispersion of 

Unsteady Convective Diffusion in Couple Stress 

Poorly Conducting Fluid Bounded by Porous Layer 

K.S. MALLIKA, N..Rudraiah (Global Acad Tech., 

Bangalore, India) 

Effective Properties Of Multilayered Composites In 

Spherical Coordinates 

Alejandro ALONSO Fúster , Raúl Guinovart Díaz, 

David Guinovart Sanjuán, Julián Bravo Castillero, 

Reinaldo Rodríguez Ramos (La Habana, Cuba) 

Modelling Of Effective Elastic Properties And 

Crack Bridging In Metal-Ceramic Interpenetrating 

Phase Composites Michał BASISTA, Zuzanna 

Poniżnik (Polish Acad Sci, Warsaw) 

Investigation Of Interlaminar Resistance Of Angled 

Laminate Beams 

Gang ZHOU, P. Nash (Loughborough U., UK), J. 

Callahan, J. Haworth, K. O’Brien, B. Aspinall, P. 

Ripley, J. Rishton (Aircelle Ltd, Burnley, UK) 

Session 2d OXIDE 1 

Monday 5:00PM-6:55PM Dalian Room 

Chairs: K. Fujiwara, P. Mele, Y. Tsuchiya Q. Guo 



Chairs: Y. Shen, N.D. Sang, J. Zeng, T.C. Chen 

Structural Properties Of Magnetite Films Grown By Pulsed Laser 

Deposition Qixin GUO, Kazuki Nakamura, Katsuhiko Saito, Tooru 

Tanaka, Mitsuhiro Nishio (Saga U., Japan), Makoto Arita, Yoshifumi Ikoma 

(Kyushu U.,Fukuoka, Japan), Jian Ding, Di Zhang (Shanghai Jiaotong U., 

China) INVITED 

Observation of Local Electrochemical Phase Change in Resistive 

Switching Devices Kohei FUJIWARA (Osaka U., Japan), Yosuke Konno, 

Yoshinobu Nakamura (U. Tokyo, Japan), M.J. Rozenberg (U. Paris-Sud, 

France), Hidenori Takagi (RIKEN, Saitama, Japan) INVITED 

Synthesis and Characterization of YBa 2Cu 3O x Thin Films 

Incorporating BaSnO 3 Length-Controlled Nanorods 

Paolo MELE (Hiroshima U., Japan), K.Matsumoto, Y. Honda, I. Tanaka 

(Kyushu I.T., Japan), A. Ichinose (CRIEPI), Y. Yoshida, Y. Ichino (Nagoya 

U., Japan), R. Kita (Shizuoka U., Japan) INVITED 

Single-Walled Carbon Nanotube/PMMA Composite via an 

Electrostatic Adsorption Assembly Technique Hiroyuki MUTO, Norio 

Hakiri, Go Kawamura, Atsunori Matsuda (Toyohashi U.T., Japan) 

INVITED 

Pulsed Laser Deposition Of LaFeO 3 Thin Films Using The Target 

Prepared By Pechini Method Yoshito TSUCHIYA, Kento Norota, Yuta 

Watabe, Takuji Kuroda, Nobuyuki Iwata,Takuya Hashimoto, Hiroshi 

Yamamoto (Nihon U., Chiba, Japan) 

Growth Of AFeO X (A = Ca, Sr) By Pulsed Laser Deposition Method At 

High Pressure Oxygen And Ozone Atmosphere Kento NOROTA, 

Yoshito Tsuchiya, Yuta Watabe,Takuji Kuroda, Nobuyuki Iwata, Takuya 

Hashimoto, Hiroshi Yamamoto (Nihon U.,Chiba, Japan) 

Special OXIDE BREAKOUT SESSION 

Monday 7:00PM-7:30PM Dalian Room 

Chairs: T. Endo, H. Muto, K. Tanaka 

K. ENDO, H.-U. HABERMEIER, J. NOGUES 5`talks, and discussion 

Is The Dip Of Reflectance Always Caused By 

Plasma? Yan SHEN, Wei-Xi Zhou, Jian-Bo Chen, 

Jing Li, Yu-Xiang Zheng, Hai-Bin Zhao, Rong-Jun 

Zhang, Liang-Yao Chen (Fudan U., Shanghai, China), 

Wei Li, Xun-Ya Jiang, (Shanghai Inst. Microsys Inform 

Tech, CAS, China), David W. Lynch (Iowa St.U., 

Ames) 

Effect Of Sulfamic Acid As Complexing Agent On 

Electrodeposition of CIGS Absorber Thin Film 

Pham Hong QUANG, Dang Thi Bich Hop, Ngo Dinh 

Sang, Le Tuan Tu, Nguyen Hoang Nghi (Hanoi U. 

Science, Vietnam) 

Effect Of Electrodeposition Potential On The 

Composition And Morphology Of CIGS Absorber 

Thin Film NgoDinh SANG (Nat. U. Civil Eng., 

Hanoi, Vietnam), Pham Hong Quang, , Le Tuan Tu, 

Dang Thi Bich Hop, Nguyen Thanh Nghi (Hanoi U. 

Sci, Vietnam) 

Influence Of Humidity And Elevated Temperature 

On Magnetic Properties Of Nd-Fe-B Anisotropic 

Bonded Magnets Dariusz KAPELSKI, Barbara 

Slusarek, Bartosz Jankowski, Marcin Karbowiak, 

Marek Przybylski (Tele and Radio R.I., Warsaw, 

Poland) 

Rapid Initiation Of Reactions In Al/CuO-Based 

Reactive Multilayer Films Xiang ZHOU, Ruiqi Shen 

(Nanjing U. Sci.Tech., China) 

Percolation and Conductivity of SWNT Networks 

with Layer-By-Layer Spray Deposition 

Y. Miao, L. Chen, Q.Q. Yang, R. Sammynaiken, W.J. 

(Chris) Zhang (U. Saskatchewan, Canada) 

Nanoscale Mechanical And Mechanically-Induced 

Electrical Behaviors Of Silicon Nanowires 

Tei-Chen CHEN, Yen-Hung Lin (Nat. Cheng Kung U., 

Tainan), Yuh J. Chao (U. South Carolin), Xiaodong Li 

(Nat. Cheng Kung U.) 



Chairs: H. Lim, X.Y. Wang, B.C. Tobias, Z. 

Ouyang 

Properties Of Non-Shrinkage Chemical Grout 

Using Silanol/Si-Oh For Repairing And 

Strengthening Of Concrete Structures H.J. 

JU, D.H. Lee, K.S. Kim, D.H. Kim, 

J.Y. Kwak (G-stone, Seoul, S. Korea) 

Consolidation Of Silica Sand-Cement 

Frogbrick Composites 

Benjamin C. TOBIAS (Catholic U. Daegu, 

Hayang, S. Korea) 

Experimental Study On Basalt Fiber 

Reinforced Syntactic Foams 

Morampudi Vijay, Zhenyu OUYANG (Southern 

U. A&M U., Baton Rouge, LA) 

Buckling And Postbuckling Behaviour Of A 

Delaminated Ship Deck Plate Subjected To 

Shear Loading Ionel CHIRICA, Elena-Felicia 

Beznea (U. Galati, Romania), David Hui (U. 

New Orleans) 

Longitudinal Wave Velocity Of Bonded PSC Wires 

Embedded In Nuclear Containment 

Byeong Hwa KIM (Kyungnam U., S. Korea), Do 

Hyung Lee (Paichai U., Daejeon, S. Korea) 

Storage Stability And Physical Properties Of 

Asphalt Modified With Nanoclay And Warm 

Asphalt Additives 

Mohd Ezree ABDULLAH, Kemas Ahmad Zamhari, 

Nafarizal Nayan (UTHM, Johor, Malaysia), Mohd 

Rosli Hainin (U.Teknologi Malaysia), Madi Hermadi 

(UTHM, Johor, Malaysia) 

Volume Changes In Slag In The Subsoil Of 

Constructions And Their Influence On Load- 

Bearing Structures Radim CAJKA, Petr Martinec 

(T.U. Ostrava, Czech Rep.) 


Monday 5:00PM-7:30PM Hanzhou Room 

Chairs: L. Feo, S.R. Das, H. Marzouk, D.Z. Chen, M.A. Omar 

Crashworthiness Of Vehicle Composite Sandwich Structures 

P. C. Neves (IDMEC, Porto, Portugal), A. A. Fernandes, A. J. M. 

Ferreira (U. Porto, Portugal) 

Formation Of Heterogeneous Microstructure In Steel Plate 

Processed By Accumulative Surface Forming 

Libor KRAUS, Michal Zemko, Zbysek Novy (COMTES Fht, 

Czech Rep.) 

Experimental Study Of The Instability Of Longshore Currents 

On Different Plane Beaches Zhili ZOU, C.P. Ren, D.H. Qiu 

(Dalian U.T., China) 

Two-Input Or/Nor Cascade In Space Compression In VLSI 

Sunil R. DAS (Troy U., Montgomery, AL), Satyendra N. Biswas 

(Dhaka, Bangladesh), Altaf Hossain, Mansour H. Assaf (U. Ottawa, 

Canada) 

Impact-Echo Technique For Detecting The Cracks Propagation 

In Concrete Plates N. Dawood, H. MARZOUK (Ryerson U., 

Toronto, Canada) 

Composite Repair Using Vartm Techniques Ronald 

STERKENBURG, PengHao Wang (Purdue U., W. Lafayette, IN) 

Advanced Simulation and Analysis of Materials Behavior 

during Intense Power Deposition in Tokamaks, Inertial Fusion, 

and EUV Lithography Devices Ahmed HASSANEIN, V. Sizyuk, 

T. Sizyuk, G. Mihloshevsky, S. Harilal (Purdue U., W. Lafayette, 

IN) 

Development Of Fracture Fixation Plates Prototype Through 

Metal Injection Moulding (Mim) Process 

Mohd A. OMAR, I. Subuki, N. Abdullah, M.F. Ismail, A.H. 

Hashim (SIRIM, Kedah, Malaysia), A.H. Zulkifly (U. Malyasia 

Kuantan, Pahang)


Monday 7:30PM-10:00PM Ballroom 1 

Chairs: S. Jafari, H.S. Ullah Butt, 

O. Benjeddou, S.Y. Sun 

Natural Frequency Analysis Of Thick 

Rectangular FGM Plates Under In-Plane 

Loading By Differential Quadrature 

Method Saeed JAFARI, Mansour 

Mohieddin Ghomshei (Islamic Azad U., 

Iran) 

Basic Study of Wimax Simulation 

Monika RANI, Anil Rose (Denhandhu C.R. 

Univ., Haryana, India) 

Coupled Structural/Thermal Analysis Of 

Cylindrical Part Of Multilayered 

Composite Vessel 

A. HOCINE, H. Ghouaouala, F. Kara Achira 

(Hassiba BEnbouali U.,Algeria) 

Size Effect On Tensile Stress Of Dry 

Unidirectional Carbon Fibers Sheets 

Omrane BENJEDDOU, Oualid Limam, 

Mongi Ben Ouezdoua (Ecole Nat Ing 

Tunis,Tunisia) 

Interfacial Toughening Mechanism Of 

Foam Core Composite Sandwich Beams 

With Chopped Fibers 

Shiyong SUN, Chen Haoran (Dalian U.T., 

China) 

The Language of Two-by-two Matrices 

spoken by Optical Devices Y.S. KIM (U. 

Maryland) 

Analysis of Micromechanical Behavior in 

Short Fiber Composites 

HongGun KIM, Lee Ku Kwac, Seung Gyu Oh, 

Tae Hoon Kim, Bophang Sorn,Hee Jae Shin 

(Jeonju U., S. Korea), Chai Young Lim, Ki Hyun 

Yoo, Jeong Sang Song,Yong Hong (Chonbuk, S. 

Korea) 

Session 3d NANO 1 

Monday 7:30PM-10:00PM Dalian Room 

Chairs: Xiaoyun Jin, Y.ongjian Yang, F. Zairi, x.Y. Jin 

Micromechanics-based Modeling of the Effective Viscoelastic Behavior 

of Polymer/clay Nanocomposites: Application to Polyamide-6 

Reinforced with Modified and Unmodified Montmorillonite Clay K. 

Anoukou, F. ZAIRI, M. Naït-Abdelaziz, A. Zaoui, J.M. Gloaguen (U. Lille 

Nord de France) 

Template-Based Synthesis Of Al/Ni Nanocomposite On Silicon 

Substrate Xiaoyun JIN, Yan Hu, Ruiqi Shen, Yinghua Ye (Nanjing U. 

Science & Tech.) 

Structure and Thermomechanical Properties of Amorphous/Nano- 

Crystalline Composites of Shape Memory Ti 2NiCu Pnina Ari-Gur (U. 

Western Michigan, Kalamazoo), Yongjian YANG (U. Auckland, New 

Zealand), S. Belyaev (St. Petersburg, Russia), V. Koledov, D. Kuchin 

(Moscow, Russia), W. Gao (U. Auckland), N. Resnina (St. Petersburg), 

Plasma-Assisted Synthesis And Modification Of Composite 

Nanoparticles In Liquids Nikolai TARASENKO, Andrei Butsen, Alena 

Nevar, Mikhail Nedelko, Mehdi Mardanian (NAS, Minsk, Belarus) 

Formation of InAs Nanowire by Solid Source Reaction: A Promising 

Material As The High Mobility Channel For Nanoelectronics Yu-Lun 

CHUEH (Nat. Tsinghua U., Hainchu), Alexandra C. Ford, Ali Javey (UC 

Berkeley, Calif.) chair 

Preparation and Properties of GRAPHENE and its 

NANOCOMPOSITES Chen-Chi M. MA, Shin-Yi Yang, Hsi-Wen Tien, 

Jen-Yu Wang, Shin-Ming Li, Yu-Sheng Wang, Chia-Hong Liu, Shu-Han 

She, Wei-Ning Lin (Nat. Tsinghua U., Hsinchu) Mon-Tues 

Session 3b METAL 1 


Chairs: Y. Tian, R. Kozera, P. Chabera,H. 

Bayrakdar 

Corrosion Behavior of KFRP at High 

Temperature Dry-Wet Cycle In Salt Water 

Ye TIAN, Dongxing Zhang, Dihong Li, Haiying 

Xiao, Jin Jia (Harbin I.T., China) 

Corrosion Behavior Of Different Prestressing 

Strand Types For Use In The Post Tensioning 

Of Bridges R.D. Kalina, S. MacLean, J.E. 

Breen, Harovel G. WHEAT (U. Texas, Austin) 

Effect Of Electroless Metallization Parameters 

Of Carbon Fibres On Ni-P Coatings 

Rafał KOZERA, Jerzy Bieliński, Anna 

Sałacińska, Joanna Olejniczak, Anna 

Boczkowska, Krzysztof J.Kurzydłowski (Warsaw 

U.T., Poland) 

Microstructure And Mechanical Properties Of 

Cermic-Metal Composites Obtained By 

Pressure Infiltration PAULINA CHABERA, 

Anna Boczkowska, Artur Oziębło, Zbigniew 

Pakieła, Krzysztof J. Kurzydłowski (Warsaw 

U.T., Poland) 

Microwave Absorption Properties Of 

Ferrite–Acrylated Epoxy Polymer 

Nanocomposites Harun BAYRAKDAR 

(Gebze I.T., Turkey) 

Laser Cladding Of Cu0.5 NiAlCoCrFeSi High 

Entropy Alloy On AZ91D Magnesium Substrates 

T.M. YUE, K.J. Huang (Hong Kong Poly U., SAR, 

China) Mon-Tues 

Core-Shell Structure And Mechanical Behavior Of 

A New Type Of Iron-Containing 

Titanium/Hydroxyapatite Composites Q. Chang, 

Daolun CHEN (Ryerson U., Toronto, Canada), H.Q. 

Ru, X.Y. Yue, L. Yu, C.P. Zhang (Northeastern U., 

China) Mon-Wed 

Oxidation Behaviour Of Ion-Implanted 

Nanocrystalline Fe-Cr Alloy Fabricated By 

Different Densification Techniques: Spark Plasma 

Sintering And Hot-Pressing 

Darwin SEBAYANG, Deni S. Khaerudini, H. Saryanto, 

M.A. Othman, S. Hasan(UTHM, Johor, Malaysia), D. 

Fredrick (Santa Rosa, Calif.), T. Sujitno, P. Untoro 

(Banten, Indonesia) 

Session 3c CHEM 1 


Chairs: Y.N. Makogon, B. Jiang, F.M.B. Marques 

M.B. Agustin 

Thermostimulated Synthesis Of MoO 3 And 

W xMo 1-XO 3 Nano- And Microscale Particles 

And Their Application For Deposition Of Ni- 

Oxide Composites T.V. SVIRIDOVA, L.I. 

Stepanova, D.V. Sviridov (Belarusian St.U., 

Belarus) 

Formation of L10(FePt) Phase In 

Nanodimensional Fe/Ag/Pt and 

Fe 50Pt 50/Ag/Fe 50Pt 50 Film Compositions On 

Substrates of SiO 2/Si(001) Yu N. MAKOGON 

(Nat. T.U. KPT, Kiev, Ukraine), M. Albrecht, G. 

Beddies (Chemnitz U.T., Germany), D.L. Beke, G.L. 

Katona (U. Debrecen, Hungary), E.P. Pavlova, S.I. 

Sidorenko, T.I. Verbitska, I.A. Vladimyrskiy (Nat. T.U., 

KPI) 

Preparation of Organic-Inorganic Hybrid AR 

Coating by Sol-gel Process 

Xinxiang Zhang, Xi Ke, Sida Zhang, Zhili He, 

Bo JIANG (Sichuan U., Chengdu, China) 

Mixed Ionic Conduction In Homogeneous And 

Layered Composite Electrolytes F.M.B. 

MARQUES, T. Saradha, A.S. Fereira, S.G. 

Patrício, F.M.L. Figueiredo(U. Aveiro, Portugal) 

Reinforcement Of Starch-Based Biocomposite Film 

By Microcrystalline Cellulose From Corn Husk 

Melissa B. AGUSTIN, Rohit C. Tilwani, Eriel May T. 

Bandong, Joel R. Salazar (Central Luzon St.U., Nueva 

Ecija, Philippines), Weerachai Phutdhawong 

(Kasertsart U., Nakhorn Pathom, Thailand) 

Vortex-Induced Assembly Of Protein Nanofibrils: 

Towards New Scaffold Materials 

Wojciech DZWOLAK (U. Warsaw, Poland) 

Novel Application Of Insulin Amyloid 

Superstructures As Templates For Surface- 

Enhanced Raman Scattering 

Slawomir WOJCIK, Wojciech Dzwolak (U. Warsaw, 

Poland) 

Perylene Diimide (PDI) Based Organic Photovoltaic 

Cells with Nano-Fabric Composite Structure 

Yong MIN, June H. Park, Austin R. Carter, Lynetta M. 

Mier, Sharlene M. Lewis, Raju P. Nandyala (Ohio 

St.U., Columbus) 


Monday 7:30PM-10:00PM Hangzhou Room 

Chairs: R. Pan, J.W. Kim, J.M. Ting, A.K. Bharimalla 

Polyurethane Hybrid Composites Containing Trisilanolisobutyl Poss: 

Preparation, Structure And Properties Rui PAN (Sichuan Normal U., 

Chengdu, China), Ing Kong, Robert. Shanks (RMIT, Australia) 

Optimization Of An Airbag Inflator For The Protection Of Occupant 

Injury Jin-wu KIM, Sheikh-Md. Rasel, Jung-il Song (Changwon N.U., 

Kyungnam, S. Korea) Mon-Tues 

Effect of Refining Pretreatment on Preparation Of Cellulose 

Nanofibrils By Mechanical Process A.K. BHARIMALLA, V.S. 

Karande, S.T. Mhaske, N. Vigneshwaran (Mumbai, India) 

Application Of Atmospheric Pressure Plasma Treatment To Improve 

Hydrophilc Property Of Aluminum Foil JaeHa LEE, JaeYoung Jang, 

Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea), HyunWook Kim 

(Dongwon Tech Co. Kimhae, S. Korea) 5 min 

Atmospheric Pressure Plasma Treatment Of Polypropylene As Door 

Panel Part Material JaeYoung JANG, JaeHa Lee, KyongYop Rhee 

(Kyung Hee U., Yongin, S. Korea), Hyun Wook Kim (Dongwon Tech Co., 

Gimhae, S. Korea) 5 min 

Improvement Of Hydrophilic Property Of Magnesium Alloy Panel 

Through Oxygen Plasma Modification Kyong Yop RHEE, Jae Young 

Jang (Kyung Hee U., Yongin,S. Korea) 5 min 

Non-covalently Functionalized Carbon Nanotubes as Catalyst Supports 

for Fuel Cell Applications 

Shuangyin WANG, Xin Wang (Nanyang T.U., Singapore)


Tuesday 8:00AM-10:30AM Ballroom 1 

Chairs: M.F. Ren, C.L. Zhang, N.H. Zhang, J.Y. 

Liu 

Calculating Investigation On Some Effective 

Properties Of Interpenetrating Phase 

Composites Hongtao ZHANG (Jiangxi Blue 

Sky U., Nanchang, China) 

Structural Behaviour Of Composite Cladding 

Panels 

Jian YANG, Yumin Sun (U. Birmingham, UK) 

Inspection Of Subsurface Defects In 

Honeycomb Structure Composites Using 

Infrared Lock-Cn Thermography Junyan 

LIU, Yang Wang (Harbin Inst. Tech., China) 

Reinforcement Efficiency Of Carbon 

Nanotubes: Probablistic Study Of Nanotube 

Waviness Roham RAFIEE (U. Tehran, Iran) 

Finite Element Analysis For Interface Crack 

In Piezoelectric Composite Under Impact 

Loading Rui-Xiang BAI, Liang Wang (Dalian 

U.T., China), Ye-Jin Shi (COMAC,Shanghai 

Aircraft Design & Res.Inst., China) 

Stresses Development In An Advanced Grid- 

Stiffened Plate During The Co-Curing Process 

Mingfa REN, Qizhong Huang, Haoran Chen 

(Dalian U.T., China) 

Vibrational Analysis Of Carbon Nanotubes In 

Thermal Environments 

Chen-Li ZHANG, Hui-Shen Shen (Shanghai 

Jiaotong U., China), Jie Yang (RMIT, Melbourne, 

Australia) 

A Model For Nanomechanical Behaviours Of 

Microcantilever-Based Single-Stranded Dna 

Chips Induced By Conformational Entropy 

Neng-Hui ZHANG, Zou-Qing Tan, Jin-Ying 

Shan (Shanghai U., China) 


Tuesday 8:00AM-10:30AM Dalian Room 

Chairs: M. Singh, H. Kezuka, N. Iwata, M. Yokura 

Improvement Of R-Plane Oriented Cr 2O 3 Thin Films Surface Grown 

On Sapphire Substrates Nobuyuki IWATA, Takuji Kuroda, Kento 

Norota, Yoshito Tuchiya,Yuta Watabe, Kouichi Takase, Hiroshi Yamamoto 

(Nihon U., Chiba, Japan) INVITED 

Preparation of Bi-Superconducting Grains Included Seed-Crystals By 

Shock Compaction Hiroshi KEZUKA (Tokyo U.T., Japan), Kazuhiro 

Endo (Kanazawa I.T., Japan), Mineo Itoh (Kinki U.) INVITED 

Oxygen Plasma Induced Ultralong Lifetime Of Heat Sealing Effect Of 

PET Films Miyoshi YOKURA, Kenichi Uehara, Guo Xiang, Akinobu 

Okamoto (Mie U., Japan),Yoshinobu Nakamura (U. Tokyo, Japan), 

Lakshmi Reddy (Kadapa, India), Tamio Endo (Mie U., Japan) 

Increased Thermal Stability Of Multi-Walled Carbon Nanotube 

Structure By Attaching CTAB Capped Zinc Oxide Nanoparticles 

Manish Kumar (CSIO, Chandigarh, India), Mandeep SINGH 

(Inst.Chem.Tech, Prague, Czech Rep.), Dushyant Kushavah, M.L Singla 

(Chandigarh, India) 

Nanocrystals-Glass Composites For Photonic Devices 

Shifeng Zhou, Yu Teng (Zhejiang U., Hangzhou, China), Jianrong QIU 

(South China U.T., Guangzhou) INVITED 

Depositions Of Proton Conductive Oxide Thin Films By Sol-Gel 

Method For Fuel Cell Applications 

Kiyoshi UCHIYAMA (Tsuruoka Nat. Coll Tech., Yamagata, Japan) 

Scratch Resistance Of Transparent Conductive Oxide Film On 

Polymer Substrate Inguna STRAZDINA, Toms Torims (Riga T.U., 

Latvia), Edmunds Macevskis,Viktors Kozlovs (Sidrabe Inc, Riga, Latvia) 

Stannic Oxide Nanopowders Via The Co-Precipitation Method 

Mohamed .M. RASHAD, Adel A. Ismail, I. Osama, Ibrahim A.Ibrahim 

(CMRDI, Cairo,Egypt), Abdel-Hakim T.Kandil (Helwan U., Cairo, Egypt) 

Session 4b TEXTILE 1 


Chairs: B. Provost, J.K. Luo, , M.K. Yakubu, 

J.M. Byeon 

2D Laminated and 3D Warp Interlock 

Fabric Under High Velocity Impact 

Benjamin PROVOST, François Boussu, 

Daniel Coutellier (U. Lille Nord de France) 

Flax Fibre Reinforced Poly Lactic Acid 

Composites by Solvent-Casting Method 

Mohammed K. YAKUBU (Ahmadu Bello 

U., Zaria, Nigeria) , Rakesh Kumar (CSIR, 

Port Elizabeth, S. Africa 

Effect Of Various Surface Treatments For 

Jute Fiber Reinforced Composites 

Jeong-myung BYEON, Jin-woo Kim, Gibeop 

Nam, Jung-il Song (Changwon N.U., 

S.) 

Shape Memory Effect and 

Thermomechanical Properties Shape 

Memory Polymer Fabric Composite in 

Tension Mode M. Ahmad, D. Singh, M. 

Miraftab, J.K. LUO (U. Bolton, UK) 



Chairs: M. Ionita, A. Oki, B. Ahmmad, C.L. 

Cheung 

Atom Counting And Atomic Structure For 

Monolayer-Protected Gold Clusters Via 

Quantitative HAADF- STEM Zhiwei WANG 

(U. Birmingham, UK), O. Toikkanen (Aalto U., 

Finland), F. Yin, Z.Y. Li (U. Birmingham), B.M. 

Quinn (Aalto U.), R.E. Palmer (U. Birmingham) 

Impact Of Chemical Functionalization Of 

Swcnts On PPY Nanocomposites: Multiscale 

Molecular Modeling And Experimental 

Investigations Mariana IONITA, Alina Pruna 

(U. Poli Bucharest, Romania) 

Pd Nanoparticles Deposited On Poly(Lactic 

Acid) Grafted Carbon Nanotubes: Synthesis, 

Characterization And Application in Heck C- 

C Coupling Reaction Gururaj M. Neelgund, 

Aderemi OKI (Prairie View A&M U., TX) 

Inorganic Polyoxide Thermoplastics 

Alexander SHAULOV, A. Grachev, A. 

Lyubimov, G. Lyubimova, E. Stegno, A. Berlin 

(Semenov Inst., Moscow, Russia) 

Green Tea Mediated Biosynthesis Of alpha-Fe2O3 

Nano˗/ Micro-Particles And Their 

Characterization Bashir AHMMAD (Okayama U., 

Japan), Junichi Kurawaki (Kagoshima U., Japan), 

Takahiro Ohkubo, Yasushige Kuroda (Okayama U.) 

Vertical Growth Of Metallic Boride Nanowires And 

Their Field Emission Properties 

Robert M. Jacobberger, Joseph R. Brewer, Chin Li 

CHEUNG (U. Nebraska, Lincoln) 

Polymer/Layered Double Hydroxide 

Nanocomposites Kongli Xu (Inst.Chem, CAS, Beijing, 

China), Guangming CHEN (Graduate Univ. CAS) 

The Effect Of Boundary Layer On Activated Liquid 

Phase Sintering Of W-bronze Composites by Co and 

Fe Additions Mohamad S Kahtan, R. Azmi (U. 

Malaysia Perlis) 


Tuesday 8:00AM-10:30AM Hangzhou Room 

Chairs: Tao Deng, D.D. Li, T. P. Chu, W. Taweepreda 

Design And Simulation Of The Ultrasonic Spot Metal Welding Horn 

Used To Improve Welding Performance Ziad Al-SARRAF (U. 

Glasgow, UK) 

Micro/Nanoengineered Thermal Ground Plane 

Tao DENG, Shakti Chauhan, Chris Eastman, Peter De Bock, Pramod 

Chamarthy, Stan Weaver (GE Global Res.Cen., Niskayuna, NY) 

TiO 2 Nanotubes- Applications in Nanotemplates and Photovoltaics 

Dongdong LI, Dongfang Liu, Xiaohong Fang, Linfeng Lu, Changzhou 

Wang, Xiaoyuan Chen (Shanghai Adv. Res. Inst., China) 

Mechanical Properties Of Self Reinforced Poly(Lactic Acid) Prepared 

By Compression Moulding Izan Roshawaty MUSTAPA, Robert A. 

Shanks, Ing Kong (RMIT, Melbourne, Australia) 

Preparation Of Short Carbon Fiber/Sic Multilayer Composites By 

Tape Casting Wenshu YANG, Claudio Badini (Politec Torino, Italy), Laura 

Fuso (Dronero, Italy), Sara Biamino, Claudia Vegabolivar Bolivar, Paolo 

Fino (Politec Torino, Italy) 

Non-Destructive Evaluation Of Carbon-Carbon Composites Using 

Infrared Thermography Tsuchin Philip Chu, Jarlen Don, Yicheng Pan, 

Anish Poudel (Southern Illinois U.,Carbondale) 

Mixing Solid Particles in Fluidized Beds Haihong FAN, Delong Xu, 

Yong Min, Hui Li, Yanxin Chen, Jinhe Fan (Xi’an U.Architecture & Tech., 


Self-Assembled Nanometric Spacer on Surface of Natural Rubber 

Composited with TiO 2 Kritsada Phatcharasit, Wirach TAWEEPREDA 

(Prince of Songkla U.,Hat-Yai, Thailand) Mon-Wed 

Fabrication Of A Three Dimensional Superhydrophobic Surface 

Structure And Characteristics Of Flow Past It Dongseob KIM, 

Woonbong Hwang*(POSTECH, Pohang, S. Korea)

Tuesday 10:30AM-11:00AM break 


Tuesday 11:00AM-1:30PM Ballroom 1 

Chairs: L. Tumonis, J.G. Zhai, P. Arato, Y. Zhao 

Stochastic Approach To Simulation Of 

Interaction Of Multi-Spherical Particles 

Liudas TUMONIS (Lithuania Inst.Energy, 

Kaunas), Rimantas Kacianauskas (Vilnius 

Gediminas T.U., Lithuania), Algis Dziugys 

(Lithuania Inst.Energy) 

Application Of Indentation Fracture 

Mechanics Approach For Determination Of 

Fracture Toughness of DLC Coating Ceramics 

Materials Yan-rong WANG, Sheikh-Md. 

Rasel, Hyoun-kon Ku, Jung-il Song (Changwon 

N.U., S. Korea) 

Structural Analysis of Steam Surface 

Condenser 

Jian-Guang ZHAI (Changwon Nat.U., S. Korea), 

Jong-Rae Cho (Korea Maritime U., Busan), Hua- 

Hou (North U. of China, Taiyuan, China), Yan- 

Rong Wang, Jung-Il Song (Changwon N.U.) 

Nonlinear Static Analysis Of A Beam Made Of 

Functionally Graded Materials 

Julien Thivend, Habib Eslami, Yi ZHAO 

(Embry-Riddle Aero U., Daytona Beach, FL) 

Stress Relaxation Of Impact Damaged 

Composites 

Yuanjian Tong (Swansea U., UK, & Beijing 

U.Chem.Tech.), David H Isaac (Swansea U.) 

Contacts In Ceramic-Carbon Nanocomposites 

Peter ARATO (Budapest, Hungary) 

Strategies For Improving Ductility Of Bulk 

Nanostructured Materials 

Yonghao ZHAO (U. Shanghai Sci &Tech., UC 

Davis, Calif.) 


Tuesday 11:00AM-1:30PM Dalian Room 

Chairs: M. Watanabe, J. Lisal, M. Fan, P. Duchek 

PLA-Silk Fiber Composites for Biomedical Applications 

H.Y. Karen CHEUNG, A. Collier, J. Dean, B Stearn, T.W. Clyne 

(Cambridge U., UK) Tues-Wed 

Modeling And Simulation For Microbial Depolymerization Of 

Polyethylene Glycol Masaji WATANABE (Okayama U., Japan), Fusako 

Kawai (Kyoto I.T., Japan) 

Replacement Of Local Osteochondral Defects As Hybrid Bio- 

Composite Jaroslav LISAL, Miroslav Petrtyl (Czech T.U>, Prague), 

Zdenek Bastl (ASCR), Ladislav Senolt (Charles U., Prague), Zdenek 

Krulis (ASCR), Pavel Cerny (Ortotika, Ltd. Czech Rep.) 

Nano Technology Modification Of Natural Fibres For Bio-Composites 

Dasong DAI, Mizi Fan (Brunel U., UK) 

Shape Optimization Of Fiber In Biomaterials 

Petr P. PROCHAZKA, Martin J. Valek (Czech T.U., Prague) 

Use Of Acetylated Starches In Biodegradable Plastics And Composites 

With Montmorillonite Petr DUCHEK, Jan Schubert (U. West Bohemia, 

Czech Rep.) 

Nanoscale Reinforcement Of Light Weight Bio-Based Foams Using 

Rice Straw Nanofibers Chularat KRONGTAEW, Saniwan Srithongkham, 

Lalita Vivitchanont. Siritorn Nakchamnan (Mahidol U., Nakorn Pathom, 

Thailand) 



Chairs: K.K. Kamani, W..Y. Wu, Kai Liu, 

H. Gong 

Micro-Raman Characterization of MTMO 

Grayscale Photomask 

Hao Hu, Jiwei Qi, Liping Sun, Penghong Liu 

(Nankai U., Tianjin, China), Qi Wang, Qian Liu 

(Beijing, China), Qian Sun, Jingjun Xu, 

Xinzheng ZHANG (Nankai U., China) Tues-Wed 

Micro and Nano Engineering Multilayer 

Polymer Complexes and Opto-Electronic 

Systems 

K.K. KAMANI, V. Ravindrachary, Ismayil, R.K. 

Rangaswami (P.G. Center,Chitradurga, India) 

Electromagnetic Property Of Polyaniline With 

Different Nanostructures Doped With D-CSA 

Shibu ZHU, Xiangnan Chen, Zuowan Zhou 

(Southwest Jiaotong U.,Chengdu,China) 

Separation of components in rice straw by 

environmentally friendly processes 

Mengmeng ZHAO, Man Jiang, Zuowan Zhou 

(Southwest Jiaotong U., Chengdu, China) 

High Energy Thermionic Electron Beam for 

Material Surface Modification 

Munawar IQBAL, Haris Rashid (U. Punjab, 

Lahore, Pakistan) 

Chirality Control And Vortex Manipulation In 

Nanomagnets Kai LIU, Randy K. Dumas, 

Dustin A. Gilbert, Nasim Eibagi (UC Davis, 

Calif.) INVITED Mon-Wed 

Photoluminescence and Raman Analysis of 

Ge-Rich SiGe Nanowires 

Hua GONG, Yingjie Ma (Fudan U., Shanghai, 

China), Peixuan Chen (IFW Dresden,Germany), 

Lijun Wang (Acad Sci, Beijing, China), Armando 

Rastelli (IFW Dresden), 

Zuimin Jiang, Zhenyang Zhong (Fudan U., 

Shanghai) 



Chairs: M. Osmani, K. Liu, L. Ding, Z.Y. Sun 

Recycling Optimisation Of Concrete 

Composites: An Experimental Study 

Mohamed OSMANI (Loughborough U., UK) 

Fibrous Brucite and Polypropylene Hybrid 

Fibers Reinforced Concrete 

Kaiping LIU, Jiuran Wen, Zhihua Sun, Zhenjun 

Wang (Chang’an U., Xi’an, China),Luciano Feo 

(U. Salerno, Italy), D. Hui (U. New Orleans) 

Reliability-Based Design Optimization Of 

Adhesive Bonded Steel-Concrete Composite 

Beams Yangjun Luo (Northwestern Poly U., 

Xi’an, China), Alex LI (U. Reims, France) 

Durability Study Of BFRP Bars Immersed In 

Water And Alkaline Solution Jingyu WU, 

Guijun Xian, Hui Li (Harbin I.T., China) 

Application Of DIC Method In Strain 

Measurement Of FRP Adhesive Joint 

Jiawei SHI, Hong Zhu, Zhishen Wu (Southeast 

U., Nanjing, China) 

Confinement Effectiveness of CFRP Grids of 

Concrete Columns 

Lining DING (Southeast U., Nanjing, China), 

Sami Rizkalla (N. Carolina St.U., Raleigh), Gang 

Wu, Zhishen Wu (Southeast U., Nanjing, China) 

Performance of Concrete Columns Reinforced 

by Steel-FRP Composite Bar under Static 

loading and Dynamic Excitation 

Ze-Yang SUN, Gang Wu, Sheng-Ze Yang, 

Zhi-Shen Wu (Southeast U., Nanjing, China) 

Enhancement of Basalt FRP by Hybridization 

For Long-Span Bridges 

Xin Wang, Zhishen WU (Southeast U., Nanjing, 



Tuesday 11:00AM-1:30PM Hongzhou room 

Chairs: C.W. Lee, S.M. Mukhopadhyay, W. Nawrocki, C.H. Chen 

Using Quality Tools to Reduce Surface Depression Defect on Composite 

Panels M. Iqbal HUSSAIN, Zuraidah Mohd Zain, Khairul Bakhtiar b 

Baharim (U. Malaysia Perlis) 

Development Of Nanocomposite Mold Insert For Microfabrication Of 

Polymeric Microfluidic Devices R.K. Jena, CheeYoon YUE, Y.C. Lam 

(Nanyang T.U., Singapore) 

Transparent Superhydrophobic Surface With Self-Cleaning Effect 

Changwoo LEE, Kyungjun Lee, Sungnam Lyu, Sangmin Lee (Pohang 

U.Sci.Tech., S. Korea),Youn Sang Kim, Woonbong Hwang (Seoul N.U., S. 

Korea) 

A Case Study On BIM Based Building Energy Evaulation 

Sang-Tae NO (ChungJu Nat. U., S. Korea) Tues-Wed 

Fiber-Optic Communication For Vehicles, Airplanes And Vessels 

Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel 

(Esslingen U. App. Sci., Germany) 

Multifunctional Hybrid Structures for Energy and Environmental 

Applications Hema Vijwani, Adam Maleszewski, & Sharmila M. 

MUKHOPADHYAY (Wright St.U., Dayton, OH) Mon-Wed 

Towards The Quantum Limits In Scaling Of Electronic Devices 

Waldemar NAWROCKI (Poznan U.T., Poland) 

Glass Fiber Reinforced Vinyl Ester Containing Nano-Al 2O 3 Composites 

for Pultrusion: Process Feasibility and Kinetic Analysis Chin-Hsing 

CHEN (Chinese Culture U.,Taipei), Yun-Yun Sun (Tung Fang Design U., 

AOHSIUNG), Yih-Chern Juang (Chinese Culture U.)

1:30PM-2:30PM Lunch 


Tuesday 2:30PM-5:30PM Ballroom 1 

Chairs: C.S. Chong, G.A. Chang, Y. Liang, F. 

Boussu 

Numerical Method for Calculating Load 

Distribution in Multi-Bolt Thick Laminate 

Joints W.X. Liu, Longquan LIU, R. Wei 

(Shanghai Jiaotong U., China) 

Response Of Beam Due To Impact Load 

CheeSiang CHONG, Kameswara Rao N.S.V. (U. 

Malaysia Sabah) 

Free Vibration of Composite Plates Subjected 

to Magnetic Field and Temperature Gradient 

Ohseop SONG, Sung-Kyun Kim, Jong-Woon 

Choi, Young-Jun Kim, Sang-Yun Park 

(Chungnam N.U., Daejeon, S. Korea) Tues-Wed 

Using Taguchi Method To Improve Composite 

Materials Learning – MSU Example 

Guanghsu A. CHANG (Minnesota St.U., 

Mankato) 

Fluid-Structure Interaction Analysis Of 

Pulsatile Flow In A Layered Anisotropic 

Aortic Wall Ying LIU, Shuai Yang 

(Beijing Jiaotong U., China) 

Delamination Detection In Composite 

Laminates By Ultrasonic Guided Wave 

Yue LIANG (Penn St.U.), Fei Yan (FBS, 

St.Coll., PA), Cody Borigo, Joseph. L. Rose 

(Penn St.U.) 

Degradation Measurement Of Fibrous 

Reinforcement Inside Composite 

Material 

Marie Lefebvre, Francois BOUSSU, Daniel 

Coutellier (U. Lille Nord de France) 


Tuesday 2:30PM-5:30PM Dalian Room 

Chairs: C. Hin, Q.F. Chen, N. Daud, Y.L. Guo 

Formation Of Oxide Nanoclusters In Nanostructured Ferritic Alloys 

During Anisothermal Heat Treatment Celine HIN (Mass Inst Tech, 

and UC Berkeley) , B.D. Wirth, J.B. Neaton (UC Berkeley, Calif.) 

INVITED 25 min 

Facile Preparation Of Graphene/Poly(Butylene Succinate) 

Nanocomposites With Enhanced Behaviors Yuan HU, Lei Song, Xin 

Wang (U. Sci.Tech. of China, Hefei, Anhui) 

Issues about Strength of Nanofiber Reinforced Composites Quanfang 

CHEN (U. Cen. Florida, Orlando) 

Design, Preparation, Performance, Industrialization And 

Application Of Advanced Clay/Rubber Nanocomposites Liqun 

ZHANG, Youping Wu, Yiqing Wang, Yonglai Lu, Ming Tian 

(Beijing U. Chem. Tech., China) 

Centrifugally Compacted Nanosilica – TALC/Calcium 

Carbonate Polyacrylate Composites Norlinda DAUD, Robert A. 

Shanks, Ing Kong (RMIT, Melbourne, Australia) 

Glass Transition Temperature And Structural Relaxation Of 

Polymer Nanoparticles Under Soft And Hard Confinement 

Yunlong GUO, Chuan Zhang, Christine Lai, Rodney Priestley 

(Princeton U., NJ) Mon-Wed 

Carbon Nano Coil Synthesized On Zero-Dimensional Silica 

Huy-Zu CHENG, Chang-Cheng Su, Tin-You Chen, Guo-Ju Chen, 

Kuo-Jung Lee (I-Shou U., Kaohsiung) 



Chairs A. Lappas, A.E. Eken, D. Bhongsuwan, P. 

Mueller-Buschbaum 

Pyroelectric Nano-Composite Thin Films 

Shlomo BERGER, Nitzani (Technion, Israel) Mon-Wed 

AB Initio Study Of Structural And Electronic 

Properties Of InN/Si And GaN/Si Interfaces 

Ilya V. MUTIGULLIN, K.K. Abgaryan (RAS, 

Moscow), D.I. Bazhanov (Moscow St.U.), O.V. 

Stepanyuk (RAS) 

Exchange Bias In Hybrid Nanocrystals Of Zinc 

Oxide Alexandros LAPPAS (IESL-FORTH, 

Heraklion, Greece), Athanasia Kostopoulou (IESL- 

FORTH and U. Crete, Greece), Franck Thétiot (IESL- 

FORTH), Ioannis Tsiaoussis (Aristotle U.), Maria 

Androulidaki (IESL-FORTH), Pantaleo Davide Cozzoli 

(Inst. Nanoscience, Lecce, Italy). Mon-Wed 

A Simulation Study On The Effects Of Nanotube 

Anisotropy And Non-Straightness On The Electrical 

Properties Of Carbon Nanotube/Polymer 

Composites 

Ali Erdem EKEN (TU Hamburg-Harburg, Germany), 

E.J. Tozzi (UC Davis, Calif.), D.J. Klingenberg (U. 

Wisconsin-Madison), W. 

Effect Of Calcination Temperature In Production 

Of Magnetic Nanoparticles For Arsenic Adsorption 

Darunee BHONGSUWAN, Tripob Bhongsuwan, 

Nucharee Chomchoey, Lakkana Boonchuay (Prince of 

Songkla U., Thailand) Mon-Tues 

Theory Of Electrostatic Interaction Between 

Polymer-Coated Composte Particles 

Hiroyuki OHSHIMA (Tokyo U. Sci, Japan) 

Sol-Gel Templated Titaniumdioxide Films for Solar 

Cell Applications Peter MUELLER-Buschbaum, 

Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar, 

Philipp Lellig (Max-Planck, Mainz, Germany), Jochen 

S. Gutmann (U. Duisburg-Essen) 

Enhanced Optical Transparency In 3D 

Nanostructured Films 

Bernardo S. MENDOZA (CIO-Mexico), W. Luis 

Moch´an (ICF-UNAM-Mexico),Guillermo P. Ortiz 

(Univ. Nac. del Nordeste, Argentina) 



Chairs: M.H. Baaghban, L. Feo, J.L. Wang, 

S.J. Han 

Bond Characteristic Of FRP Embedded In 

Concrete For Retrofit Of Reinforced Concrete 

Structure Soo-Yeon SEO (Chungju Nat.U., S. 

Korea), Luciano Feo (U. Salerno, Italy), David 

Hui (U. New Orleans) Tues-Wed 

An Experimental Investigation on Internal 

Hydrophobation of Cement Based Materials 

Mohammad H. BAGHBAN, Per Jostein Hovde, 

Stefan Jacobsen (Norwegian U. Sci. Tech.) 

Environment-Assisted Subcritical Debonding 

Of Epoxy-Concrete Interface 

Jialai WANG, Chao Zhang, Ken Fridley (U. 

Alabama, Tuscaloosa) 

Estimation Of Nominal Moment Of 

Reinforced Concrete Members Strengthened 

With FRP Baik-Soon CHO, Young-Soo 

Chung, Yeon-Wook Kim, Eunsoo Choi, Sangsoo 

Jeon (Inje U., Gyeongnam, S. Korea) 

Development of High-Performance Fiber- 

Reinforced Cementless Composite Mortar 

Hyun-Jin LIM, Chang-Geun Cho (Chosun U., 

Gwangju, S. Korea) 

Seismic Strengthening of Reinforced Concrete 

Columns by Applying Steel Fiber-Reinforced 

Cementitious (SFRC) Mortar 

Sung-Jin HAN, Chang-Geun Cho,Eui-Sik Kim 

(Chosun U., Gwangju, S. Korea) 

Seismic Performance Improvement of RC Columns 

by Applying High-Performance Fiber Cementitious 

Mortar Chang-Hwan PARK, Chang-Geun Cho, 

Jeong-Sup Kim (Chosun U., Gwangju, S. Korea, David 

Hui (U. New Orleans) 

Influence Of Concrete Skin On De-Icing Salts 

Resistance Pavel REITERMAN, Karel Kolar, 

Michaela Kostelecka, Ondrej Holcapek (Czech T.U., 

Prague) 


Tuesday 2:30PM-5:30PM Hangzhou Room 

Chairs: P. Bele 

Session on Novel Catalysts and Support Materials for Fuel Cells 

developed by Petra Bele (TU Munich, Garching, Germany) 

Synthesis, Structure, and Reactivity of Dealloyed Bimetallic PtM3 Fuel Cell 

Cathode Electrocatalysts Mehtap Oezaslan, Stefan Rudi (TU Berlin, Germany), 

Zengcai Liu (Oak Ridge N.L., TN), Peter STRASSER (TU Berlin, Germany, Oak 

Ridge N.L., TN) Tues-Fri 

Behaviour of Core Shell Nanoparticle Catalysts in the PEMFC Environment 

Sarah BALL (Johnson Matthey Tech., Sonning Common, UK) 

Synthesis And Characterization Of Nanocatalysts For The Direct 

Electrooxidation Of NaBH4 In A Solid Alkaline Membrane Fuel Cell 

Christophe COUTANCEAU, M. Simoes, S. Baranton (U. Poitiers, France) 

Graphene Composites as the Cathode Catalyst for Oxygen Reduction in Fuel 

Cells Xiaoyan Yan (Tauyuan U. Sci. Tech., China), Xili Tong, Yingyong Wang, 

Guoqiang Jin, Xiangyun GUO (G.U. Chinese Academy of Sciences, China) 

Functionalized Carbon Nanotubes And Anode Degradation In High 

Temperature PEM Fuel Cells A. Orfanidi, M.K. Daletou, S.G. NEOPHYTIDES 

(Hellas Inst., Patras,Greece) 

Alternative Support Materials And The Role Of The Support Morphology For 

The Electrode Structure S. Zils (TU Darmstadt, CRP Henri Tudor, Luxembourg), 

P. Bleith, F. Ettingshausen (TU Darmstadt), J. Suffner (TU Darmstadt, KIT 

Karlsruhe, Germany), A. Wolz , M. Michel (CRP Henri Tudor, Luxembourg), 

Christina ROTH (TU Darmstadt, KIT Karlsruhe, Germany) 

Nano-Sized Perovskite-Type Oxide / Carbon Nanotube Composites For An 

Oxygen-Reducing Electrocatalyst Kohei MIYAZAKI, Tomokazu Fukutsuka, 

Takeshi Abe, Zempachi Ogumi (Kyoto U., Japan) 

Metal-Oxide Based Supports For Electrocatalysis In Proton-Exchange 

Membrane Fuel Cells Frederic MAILLARD, F. Micoud (Grenoble-INP, France), 

A. Bonnefont (U. Strrasbourg, France), M. Chatenet (Grenoble-INP, France) 

The Effect Of Metal Oxide-Carbon Support On Electrocatalysts For Fuel Cell 

Reactions B. Ruiz-Camacho (U. Poitiers, France), M.A. Valenzuela (ESIQIE, 

Mexico), Nicolas ALONSO-VANTE (U. Poitiers, France) 

Degradation Studies of OMC Supported Pt Electrocatalyst for PEMFC 

Application In Acid Electrolyte Juqin ZENG, Carlotta Francia, Stefania Specchia, 

Paolo Spinelli (Politec Torino, Italy) 

Nano-Electrocatalysts Based On Carbon Nitride Supports For The Orr And For 

In Pem Fuel Cells Vito DiNOTO, Enrico Negro (U. Padova, Italy) POSTER


Tuesday 6:00PM-9:00PM Ballroom 1 

Chairs: D. Jia, S. Lin, A. Boczkowska, Z. Chen 

Effect Of Porosity On The Mechanical 

Properties Of YSZ/NiO Composite Anode 

Materials Dan JIA, Aixi Zhou (U. North 

Carolina-Charlotte),Yang Ling, Ke An, A.D. 

Stoica,Xun-Li Wang (Oak Ridge N.L., TN) 

Mechanical Characterization And Finite 

Element Modeling Of NBR And PDM For 

Directional Drilling Henry K. GONZALEZ, 

Jianren Zhou, Shield Lin 

(Prairie View A&M U., TX) 

Shape, Displacement And Strain 

Measurements By Sampling Moire Method 

Yoshiharu MORIMOTO (Moire Inst. Osaka, 

Japan), Motoharu Fujigaki, Akihiro 

Masaya(Wakayama U., Japan) INVITED 25 min 

Thermal Stability Analysis Of Tapered Fgm 

Annular Plates Under Nonuniform 

Temperature Distribution- A Finite Element 

Approach Mansour Mohieddin Ghomshei, 

Vahid Abbasi (Islamic Azad U., Iran) 

Effect Of The Microstructure On The 

Properties Of Ceramic–Elastomer Composites 

With 3D Connectivity Of Phases 

Anna BOCZKOWSKA (Warsaw U.T., Poland) 

Thermomagnetoelastic Behavior Of A 

Rotating Functionally Graded Hollow 

Cylinder Zengtao CHEN, A. Hamid Akbarzadeh 

(U. New Brunswick, Canada) 

The Effect Of Stoichiometric Ratio Of Curing 

Agent On The Mechanical Properties Of 

Epoxy Resins Peng WANG, Gang Sui, 

Xiaoping Yang (Beijing U. Chem Tech.,China) 


Tuesday 6:00PM-9:00PM Dalian Room 

Chairs: J.M. Bai, M. Auslender, C. Harishkumar, S.V. Roth 

Processing and Characterisation of a Polyamide 12-Carbon Nanotube 

Composite by Laser Sintering Jiaming BAI, Ruth Goodridge, Richard 

Hague, Mo Song (Loughborough U.,UK) 

Optical Properties of Silica Opal Templates in the Visible and Infrared 

Mark AUSLENDER, Shlomo Hava (Ben-Gurion U., Israel) 

Atomic Layer Deposition and Template Replication for 

Nanotechnology Engineering Diefeng GU, Gon Namkoong, Helmut 

Baumgart (Old Dominion U., Norfolk, VA) 

Comparing The Effect Of Nano-CaCO 3 And Nano-ZnO On 

Rheological Properties Of Polypropylene Using Several Models 

Hassan EBADI-Dehaghani (Islamic Azad U.,Iran) 

Multifunctional and Specific Interactions of MWCNT and Polymer As 

Decisive Parameters For High Performance Of Nanocomposites 

Chougule HARISHKUMAR,Ulrich Giese, Robert H. Schuster (DIK, 

Hannover, Germany) 

In Situ µGISAXS Investigation of Gold Sputter Deposition onto Mesoporous 

Polymer Templates. Matthias SCHWARTZKOPF, Adeline Buffet (DESY, 

Hamburg,Germany), Volker Koerstgens (TU Muenchen), Kai Schlage, Jan 

Perlich,Andre Rothkirch (DESY), Gunthard Benecke (DESY), Ezzeldin Metwalli 

(TUMuenchen), Mottakin M. Abul-Kashem, Gerd Herzog (DESY), Peter Mueller- 

Buschbaum (TU Muenchen), Ralf Roehlsberger, Rainer Gehrke, Stephan V. Roth 

(DESY, Germany) 

Tailoring Functional Polymer-Metal Nanocomposites Via Sputter Deposition 

Stephan V. ROTH, Adeline Buffet, Mottakin Abul Kashem, Gunthard 

Benecke,Rainer Gehrke, Gerd Herzog (DESY, Hamburg, Germany), Volker 

Koerstgens (TU Muenchen), Jan Perlich (DESY), Monika Rawolle (TU Muenchen), 

Ralf Roehlsberger, Andre Rothkirch, Kai Schlage, Matthias Schwartzkopf 

(DESY),Peter Mueller-Buschbaum (TU Muenchen) 

Nanoindentation Behavior of Naturally Layered Materials 

Jianhong Zhang (Tsinghua U., China), Zhongxin Wei, Guoping Zhang (Louisiana 

St.U.) 



Chairs: P.F. Mensah, Q.H. Xu, J.H. Lee, J.Y. Jin 

Mechanical Properties Of Hot Corrosion 

Tested APS And EB-PVD Multilayer Thermal 

Barrier Coatings Using Nano Indentation 

Ravinder M. DIWAN, Patrick F. Mensah, Naresh 

Polasa (Southern U., Baton Rouge, LA), Douglas 

E. Wolfe (Penn St.U.) Mon-Tues 

Coupled Metal Nanoparticles with Enhanced 

Optical Properties and Their Applications 

Zhenping Guan, Polavarapu Lakshminarayana, 

Cuifeng Jiang, Qing-Hua XU (Nat. U. Singapore) 

Properties Of Tin Thin Films Deposited Onto 

β-TYPE Ti-14Mo-3Mb-3Al-0.2Si Alloy 

Substrates At Various Processing 

Temperatures By Reactive Magnetron 

Sputtering Jun Hee Lee, A. Joseph Nathanael, 

Sun Ig Hong (Chungnam Nat. U., Daejeon, S. 

Korea) Mon-thurs noon 

Creep deformation behaviors of Zr-Nb-Sn-Fe 

alloy tubes Jong-Min LEE, Eun-Kyu Lee and 

Sun Ig Hong (Chungnam Nat. U., Daejeon, S. 


Mechanical and Microstructural Analyses of Cu- 

15at% Ag Nanocomposite Processed By High 

Pressure Torsioning KiHwan OH, HoByung Kim, 

SunIg Hong (Chungnam Nat. U., Daejeon, S. Korea) 

Mon-thurs noon 

Nanotubes Formation on Ti-6Al-4V and Zr-1Nb 

Alloys Through Anodization And Its 

Biomineralization Analysis Ju-Young JIN, A.J. 

Nathanael, S.I. Hong(Chungnam Nat. U., Daejeon, S. 


Effect Of Heat Treatment On The Mechanical 

Response And Fracture Behavior In 

STS304/Al1050/STS439 Clad Material Jun-Young 

SONG, In-Kyu Kim, Sun Ig Hong (Chungnam Nat. U., 

Daejeon, S. Korea) Mon-thurs noon 

Effect Of Alloying On The Deformation Behavior 

And Slip Mode Of Cu-16at%Al Single Crystals At 

Various Temperatures JongSu HA, SunIg Hong 

(Cheungnam Nat. U., Daejeon, S. Korea) Mon-thurs 

noon 

Session 7c COMPOSITES 1 

(miscellaneous) 


The Evaluation Of Mechanical And Thermal 

Properties Of Blended Cement Concrete 

XiaoYong WANG, HyeongKyu Cho, HanSeung 

Lee (Hanyang U., Ansan, S. Korea) 

A Study On The CO 2 Balance Evaluation Of 

Building And Civil Engineering Structures 

HyeongKyu CHO, Hun Song, HanSeung Lee 

(Hanyang U., Ansan, S. Korea) 

Electrospun Nanofibers For Artificial 

Scaffolds And Reinforcement Of Rubbers 

Ulrike Wangenheim, Ulrich Giese, Robert H. 

SCHUSTER (DIK, Hannover, Germany) 

Study On Estimating Compressive Strength 

And Physical Characteristic Of Structural 

Lightweight Concrete With Foam Agent 

TaeBeom MIN, Hanseung Lee (Hanyang U., 

Ansan, S. Korea), Luciano Feo (U. Salerno, 

Italy), David Hui (U. New Orleans) 

Detection and Characterization of Kissing 

Debonds in Composite Adhesive Joints using 

Digital Image Correlation 

R L Vijaya KUMAR, C R L Murthy, M R Bhat 

(Indian Inst.Sci., Bangalore) 

Selective Encapsulation of Dye Molecules in 

Dendrimer/Polymer Multilayer Microcapsules 

by DNA Hybridization Chuan-Liang FENG, 

Qinglei Liu, Wang Zhang, Jiajun Gu, Shenmin 

Zhu, Di Zhang (Shanghai Jiao Tong U., China) 

Development Of Radiation Shielding Concrete 

Utilzing Electronic Arc Furnace Oxidizing 

Slag Heeseob LIM, Hanseung Lee, Jaeseok 

Choi (Hanyang U., Ansan, S. Korea) 


Tuesday 6:00PM-9:00PM Hangzhou Room 

Chairs: M.C.S. Ribeiro, M. Zou, M. Ghatus, H. Wong 

Monolayer Molecular Doping For Cost-Effective Photovoltaics 

Fei XIU (City U. Hong Kong, China), Miao Yu (Hong Kong UST), Johnny 

C. Ho (City U. Hong Kong), Zhiyong Fan (HKUST) 

Synthesis and Characterization of Cathode Material for Li-ion 

Batteries Umair NISAR, Q.J. Khattak (GIK Inst., Topi, Pakistan), Mohsin 

Saleem, R.A. Shakoor (KAIST, DAejeon, S. Korea), Ali Hussiana, 

F.A.Khalid (GIK) 

Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential 

Application for Micro Surface Mounted Components Awad Kh. Al- 

ASMARI (AlKharj U., Saudi Arabia) 

Experimental Study On Polyester Based Concretes Filled With Glass 

Fibre Reinforced Plastic Recyclates -A Contribution To Composite 

Materials SustainabilityM.C.S. RIBEIRO, A. Fiuza, M.L. Dinis (U. Porto, 

Portugal), A.C.M. Castro, F.G. Silva, J.P. Meixedo, M.R. Alvim (Polytech. 

Porto, Portugal) 

Tribological Properties of Quantum Dot/PMMA Nanocomposite Films 

Min ZOU, Alex Arguelles (U. Arkansas, Fayetteville), Y. Andrew Wang 

(Ocean NanoTech, Springdale, AR) 

Experimental Investigation of the Performance of Fiber Reinforced 

EPDM for Automotive Radiator Hoses Mehdi GHATUS (Lawrence 

T.U., Southfield, MI), Chris Kargula (Auburn Hills, MI), Chris Riedel 

(Lawrence T.U.) 

Preparation Of Dielectric Embedded Silicon Nanocrystallites For Flash 

Memory Applications H. WONG, O.Y. Wong, J. Liu (City U., Hong 

Kong, China) 

Special Technology For Industrial Production Of Sandwiches From 

Metals Mark R. LIBERZON (Moscow St. Aviation T.U., Russia)


Wednesday 8:00AM-10:30AM Ballroom 1 

Chairs: R. Mohan, A. Mori, S. Zhou, G. Li 

Precipitation In Alloys: A Kinetic Monte Carlo 

And Class Model Study 

David BOMBAC, Goran Kugler (U. Ljubljana, 

Slovenia) 

Modeling And Analysis Of Dynamic Crack 

Propagation In A Nanoscale Bi-Layer Metallic 

Composite Ram Mohan, Yojna Purohit (NCAT, 

Greensboro, NC) 

Buckling And Postbuckling Behavior Of 

Laminated Stringer Stiffened Composite 

Cylindrical Panels Haim ABRAMOVICH 

(Technion, Israel) 

Monte Carlo Simulation Of Defects In Hard- 

Sphere Crystal Grown On A Squsre Pattern 

Atsushi MORI, Yoshihisa Suzuki, Shigeki 

Matsuo (U. Tokushima, Japan) 

Characterization Of Fluid Dynamic 

Properties Of Schwarz’s Primitive Cellular 

Materials Che-Cheng Chang, Shewei ZHOU, 

Yuhang Chen, Qing Li (U. Sydney, Australia) 

Prediction of Mechanical and Barrier 

Properties of Chlorobutyl Rubber/Natural 

Rubber Blend using Artificial Neural 

Networks Lin LI, Jin Zhang, Z X Zhang, Jin 

Kuk Kim 

(Gyeongsang Nat. U., S. Korea) 

On Particle Impact Induced Bond 

Breaking Of Single-Walled Carbon 

Nanotubes Puroorava Chakravarthy, Gang 

LI (Clemson U., SC) 

An Experimental Metodology And 

Apparatuses To Perform Impact Tests In 

Composite Laminate Plates Eduardo 

Henrique deCASTRO Biase, Mauricio 

Vicente Donadon (Sao Jose Campos, 

Brazil) 

Session 8d TEXTILE 2 

Wednesday 8:00AM-10:30AM Dalian Room 

Chairs: Y.Q. Wang, H. Zulkafli, G. Rizvi, T. Ai 

Mechanical Properties of Carbon Fabric-Phenolic Resin Composite 

Using Carbon Nanotubes Yi-qi WANG, Joon-hyung Byun, Cheon Won, 

Zhi-peng Hui, Jung-il Song (Changwon N.U., S. Korea) 

Rubber Toughening Of Polylactic Acid Mohd BIJARIMI, A. Sahrim, R. 

Rasid (U.Kebangsaan, Malaysia), H. Zulkafli(U. Malaysia Pahang) 

Nanoindentation Characteristic of Nanoclay/ Rubber Toughened-UPE 

Nanocomposite. S.N SURIP (U.T. MARA, Shah Alam, Malaysia), Z.Y 

Zhang, H.N. Dhakal (U. Portsmouth, UK), N.N. Bonnia (U.T. MARA) 

Properties Enhancement of PLA-Natural Fibre Composites Using An 

Ethylene Copolymer Maryam Talimi, Ghaus RIZVI (Univ.Ontario Inst. 

Tech.,Oshawa,Canada) Mon-Wed PM 

A Simple Constitutive Model For Plain-Woven C/SiC Composites 

Jun LI, Guiqiong Jiao, BoWang,ChengpengYang, Shifei Liang 

(Northwestern Polytech.U., Xi’an, China) 

Prediction Of Kink Band Formation In 3D Textile Glass Fiber 

Composites Using A Multi-Scale Modeling Strategy 

Dianyun ZHANG, Anthony M. Waas (U. Michigan), Chian-Fong Yen, Seth 

Ghiorse (US Army. Aberdeen P.G., MD) 

Modeling The Stress-Strain Behavior Of Triaxially Braided 

Composites Xinran XIAO, Christopher Cater (Michigan St.U.) 

Effect Of Surface Modification Of Kevlar Stitch Threads On 

Interfacial Hydrothermal Properties Of Carbon Fiber Reinforced 

Epoxy Stitched Composites Tao AI (Chang'an U., Xi'an, China), Rumin 

Wang (Northwestern Poly U., Xi'an, China), Jie Deng (Aerospace Comp. 

Mat. Res. Inst., Xi'an, China) 



Chairs: H.B. Kim, Y.T. Liu, S.S. Lian, 

M. Suszynska 

Effect of Interfacial Reaction Layer On The 

Cracking Behavior in 3-ply Mg/Al/STS Clad- 

Metal In-Kyu KIM, Jun-Young Song, SunIg 

Hong (Cheungnam Nat. U., Daejeon, S. Korea) 


Microstucture and Mechanical properties of 

Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Processed by 

HPT (High Pressure Torsioning) Ho-byung 

KIM, Ki-Hwan Oh, Sun Ig Hong (Cheungnam 

Nat. U., Daejeon, S. Korea) Mon-thurs noon 

Oxidation and Mechanical Properties of Zr- 

1Nb-1Sn-0.1Fe Alloys At High Temperatures 

EunKyu LEE, JongMin Lee, SunIg Hong 

(Cheungnam Nat. U., Daejeon, S. Korea) 


The Improvement Of Oxidation Behavior Of 

Powder Metallurgy Made Fe-Cr Alloys 

Yen-Ting Liu, Shuang-Shii LIAN (Nat. Taiwan 

U., Taipei), Wei-Ja Shong, R.Y. Lee (INER) 

Structure And Hardness Of Copper-Doped 

Soda-Lime Silica Glass 

Maria SUSZYNSKA (PAS, Wroclaw, Poland) 

Control Of Structure And Properties Of 

Welded Connections Of Medium Alloy Steels 

By Application Highly Concentrated Pulse 

Energy Actions A.A. DEMYANCHENKO, Yu 

N. Saraev (RAS, Tomsk, Russia) 

Adaptive Pulse Technological Processes Of 

Welding And Pad Weld Is A New High- 

Performance Method Of Obtaining Of 

Permanent Joints Of High-Strength Steels 

Yu N. SARAEV (RAS, Tomsk, Russia) 


Wednesday 8:00AM-10:30AM Hangzhou Room 

Chairs: O. . Zheng, Strobel, J. Lu, R. Artiaga 



Chairs: A. Mori, K. Nakane, M. Kikuchi 

Z. Zhuang 

Session on Materials Chemistry 

developed by Atsusi Mori (TokushimaU., Japan) 

and Masanori Kikuchi (NIMS, Japan) 

Formation And Properties Of Poly(Vinyl 

Butyral)-Zirconia Hybrids Koji NAKANE, 

Kosuke Mizutani, Ruonan Zhang, Nobuo Ogata 

(U. Fukui, Bunkyo, Japan) 

Step Velocity On The {110} Faces Of 

Tetragonal Lysozyme Crystals Under High 

Pressure Takahisa FUJIWARA, Yoshihisa 

Suzuki (U. Tokushima, Japan), Gen Sazaki 

(Hokkaido U., Japan), Shin-ichiro Yanagiya, 

Katsuhiro Tamura (U. Tokushima) 

Microfluidic Fabrication Of Colloidal Crystal Films 

And Spheres 

Toshimitsu KANAI (Yokohama Nat. U., Japan) 

Enlargement Of Grains Of Silica Colloidal Crystals 

By Centrifugation With An Inverted- 

Triangle Shaped Container KaoriHASHIMOTO, 

Yoshihisa Suzuki, Atsushi Mori, Shin-ichiro Yanagiya, 

Katsuhiro Tamura (U. Tokushima, Japan) INVITED 

Observation Of Mobile Lattice Defects In A 

Colloidal Crystal Makiko SAKABE, Yoshihisa 

Suzuki, Takahisa Fujiwara, Atsushi Mori, Shin-ichiro 

Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan) 

Preparation Of Injectable Artificial Bone 

Fabricated From Hydoxyapatite / Collagen 

Nanocomposite Akinori Kochi (Okayama U., Japan), 

Masanori KIKUCHI (NIMS, Tsukuba, Japan), Yuki 

Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka 

(Okayama U., Japan) 

Fabrication Of Calcium-Phosphate Cements From 

Hydroxyapatite Powders Surface-Modified With 

Various Concentrations Of Sodium Inositol 

Hexaphosphate And Their Material Properties 

Toshiisa KONISHI, Minori Mizumoto, Michiyo 

Honda(Kanagawa Acad Sci Tech., Japan), Zhi Zhuang, 

Mamoru Aizawa (Meiji U., Japan) 

Ultrastructural Analysis Of Synthetic 

Hydroxyapatite With Preferred Orientation To C- 

Plane Using High-Resolution Transmission Electron 

Microscopy Zhi ZHUANG, Mamoru Aizawa (Meiji 

U., Japan) 

session on Optical And Related Microwave Communication 

developed by Otto Strobel (Esslingen U. App. Sci., Germany) Wed-Thurs 

Optical And Microwave Communication Using New Materials – An 

Overview Otto STROBEL, Elke Dietrich (Esslingen U. App Sci, 

Germany), Jan Lubkoll(Erlangen Friedrich-Alexander U., Germany) 

Fiber-Optic Communication For Vehicles, Airplanes And Vessels 

Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel 

Development Of A Correlation Speed Measurement For Automotive 

Applications Christian BETZ (Esslingen U. App. Sci., Germany), 

Vladimir V. Rastorguev (Moscow Aviation Inst., Russia), Otto Strobel 

Enhancing Modern Mobile Communication Systems Using Tunable 

Components Made Of Material Utilized In New Fields Of Application 

Kira KASTELL (U. App. Sciences, Frankfurt, Germany) 

Nanomaterials for Tunable Passive Microwave Devices Yuliang 

ZHENG, A. Gaebler, M. Koeberle, R. Jakoby (T.U. Darmstadt, Germany) 

The Complex Permittivity And Permeability Of PMMA/Fe 3O 4 NPS/Ag 

NPS Composites In The Microwave Range WenHsien Sun (Ind.Tech 

Res. Inst.Hsinchu), DungShing HUNG (Ming Chuang U., Taipei), Tsing 

Tang Song (ITRI, Hsinchu), Shang Fan Lee (Academia Sinica, Taipei) 

Using Microwave Transmission to Detect Decay in Wood 

Graham BRODIE, Berhan Ahmed (U. Melbourne, Australia), Mohan V. 

Jacob(James Cook U., Australia) 

Temperature Modulation In Pressure DSC: A New Tool To Investigate 

The Pressure Effect On The Curing Ramon ARTIAGA, Carlos Gracia, 

Jorge LOpez-Beceiro, Silvia Gomez-Barreiro, Javier Tarrío-Saavedra

10:30AM-11:00AM Coffee Break 


Wednesday 11:00AM-1:30PM Ballroom 1 

Chairs: Y. Hong, J.S. Song, Y. Feng, B.P. Ronge 

Identifying Material Properties Of Composite 

Materials From Vibration Data 

Zubaidah Ismail (U. Malaya, Kuala Lumpur), 

Henry Khov, Wen L. LI (Wayne St.U., Detroit, 

MI) 

Divergence Of Composite Aircraft Wings 

Accounting The Aerodynamic Finite-Span 

Effect Yan HONG, Zhanming Qin (Xi’an 

Jiaotong U., China) 

Nonlinear Dynamics And Vibrations For 

Geometrically Nonlinear Composite Aircraft 

Wings Ji-seok SONG, Hwanhee Lee, Seog-Ju 

Cha, Sungsoo Na (U. Korea, Seoul),Zhanming 

Qin (Xi’an Jiaotong U., China) 

Internal Resonance Of Composite Sandwich 

Panels With Transversely Compressible Core 

Yizhe FENG, Zhanming Qin, Guiping Zhao 

(Xi’an Jiaotong U., China) 

Numerical Study Of Scale Effects On The 

Delamination Of Laminates Under Low- 

Velocity Impact Yajun Chen, Zhefeng YU, Hai 

Wang (Shanghai Jiaotong U., China) 

Optimization Of Drilling Conditions Of Glass 

Fibre Reinforced Plastic Composite Material 

Using Genetic Algorithm N.S. MOHAN, 

Jagannath K, S.S. Sharma, Chandrashekar Bhat 

(Manipal Inst.Tech.) 

Performance of Thin Walled Composite 

Beams with Stochastic Properties under 

Matrix Cracking Damage Babruvahan P. 

RONGE, Prashant M. Pawar (Pandharpur) 


Wednesday 11:00AM-1:30PM Dalian Room 

Chairs: C. Gadau, R.E. Mackay, T.N. Lien Truong, L.H. Tong 

Schizophyllum commune As Nano-Factory For Biosynthesis Of Silver 

Nanoparticles Mat Don MASHITAH, Yen San, Chan (U. Sains Malaysia) 

Silver Nanoparticles Based Materials For Antimicrobial Treatment Of 

Medical Leathers And Sheepskins Carmen GAIDAU (Leather & 

Footwear R.I., Bucharest, Romania), Aurora Petica (INCDIE, Bucharest, 

Romania), Wuyong Chen (Sichuan U., Chengdu, China, Lucretia Miu 

(Bucharest, Romania) 

Fabrication And Micromechanical Testing Of Polymer Micro-Grippers 

With Compliant Force Sensing Ruth E. MACKAY (U. Dundee, UK), 

H.R. Le (U. Plymouth,UK), L. Zhang (U. Dundee) 

Promising Materials Made Of Bio-Hybrid Polyurethane 

Ernie Suzana ALI (U. Sains Islam Malaysia), Sahrim Hj Ahmad, Syazana 

Ahmad Zubir (Int. U. Malaysia, Selangor) 

Sensitive Label-Free Impedimetric Immunosensor Based On 

Polypyrrole For Human Chorionic Gonadotropin Hormone Detection 

T.N. Lien TRUONG (Hanoi U.T., Vietnam), Miyuki Chikae, Yoshiaki 

Ukita, Yuzuru Takamura (JAIST, Ishikawa, Japan) chair 

Liposome As A Drug Carrier System For Different Active Substances 

Mont Kumpugdee-VOLLRATH, Hilal Bilek (U. App. Sci, Berlin, Germany) 

Engineering Of Concentrated Emulsions As A Drug Carrier System For 

Pharmaceutical Application Lihong TONG, Mont Kumpugdee-Vollrath, Jens- 

Peter Krause (U. Applied Sciences, Berlin, Germany), Pornsak Sriamornsak 

(Silpakorn U., Nakhon Pathon, Thailand) 

Surface Roughness Evaluation Of Experimental Dental Nanocomposite After 

Bleaching Dasmawati MOHAMAD, Zuryati Ab Ghani, Ooi Qian Qian, Zaid 

Hameed, Mohammed Ali (U. Sains Malaysia, Kelantan) 

Beta Casein Nanovehicles For Targeted Oral Drug Delivery – Towards 

Treatment Of Gastric Cancer Alina SHAPIRA, Irit Davidson, Noa Oron, Yehuda 

Assaraf, Yoav D. Livney (Technion, Israel I.T.) Tues-Wed 



Chairs: W.Q. Huang, H.X. Zhang, K.R. Shin, 

K.M. Lee, 

Nitrogen or Oxygen Bonds Passivating on Surface of 

Si Quantum Dots Formed by Nanosecond Pulse 

Laser Wei-Qi HUANG (Guizhou U., Guiyang, 

China),Shi-Rong Liu (CAS, Guiyang, China), Quan 

Lü (Guizhou U.), Chao-Jian Qin (CAS, Guiyang) 

Extrinsic-To-Intrinsic Transition And Sign Changes 

of Seebeck Coefficients for PbTe Nanocrystals 

Wenwen ZHOU, Wenjing Zhang, Jan Ma, Qingyu Yan 

(Nanyang U., Singapore) 

Electrical Properties Of Few-Layer Boron Nitride 

Hongxin ZHANG, Peter X. Feng (U. Puerto Rico) 

Ultrasonic Characterization for Electronic 

Package’s Micro-structure Chunguang XU, 

Zhongzhu Liu, Xinyu Zhao, Bolong Men (Beijing I.T., 


Simulated Body Fluid Evaluation Of Titanium 

Oxide Layers Exhibiting Different Morphologies 

Formed By Electrochemical Plasmacoating Process 

Ki Ryong SHIN, Kang Min Lee, You Chan Jung 

(Hanyang U., Ansan, S. Korea),Young Gun Ko 

(Yeungnam U.), Dong Hyuk Shin (Hanyang U.) 

Synthesis Of Cobalt/Gold Bimetallic Hollow 

Microspheres And Its Optical Properties 

Cheng-Seong KHE, Azizan Aziz, Zainovia Lockman 

(U. Sains Malaysia, Penang) 

Combination of Micro-Fluidics and Sol-Gel 

Templating for Nanostructuring of Titania 

Thin Films for Photovoltaic Application Monika 

RAWOLLE, Matthias A. Ruderer, Stefan M. Prams, Qi 

Zhong, David Magerl (TU Muenchen, Germany), Jan 

Perlich,Stephan V. Roth (HASYLAB at DESY, 

Hamburg), Philipp Lellig (MPI-P, Mainz), Jochen S. 

Gutmann (U. Duisburg-Essen), Peter Müller- 

Buschbaum (TU Muenchen) 

Electrochemical Response Of ZrO2-Mgo Layer On 

Mg Alloy Via Plasma Electrolytic Oxidation 

Followed By Annealing Treatment KangMin LEE, 

Byung Uk Lee, InJun Hwang (Hanyang U., Seoul, S. 

Korea), Young Gun Ko (Yeungnam U., S. Korea), 

Dong Hyuk Shin (Hanyang U.) 



Chairs: M. Fan, H.B. Shim, T.J Cho, K.B. Kim 

High Strength Natural Fibre Composites for 

Construction Mizi FAN (Brunel U., UK) 

Induced Size Effects Of Gd3+ Ions Doped 

NiZn Ferrite Nanoparticles 

Balwinder KAUR (Jammu, India), Manju Arora, 

A.K. Srivastava, R.P. Pant (New Delhi, India) 

Experimental Study for Performance 

Evaluation of Large Double Head Studs in 

High Strength Concrete HakBo SHIM, Sung 

Hun Jang, JooHo Lee, HyoSeon Park (Lotte 

Res.Dev. Inst., S. Korea) 

Air Permeability Test Of Concrete Tube 

Structures With Joints 

Joonam PARK, Lee-Hyeon Kim, Seong-Won 

Nam (Korea Railroad Res.Inst., Kyunggi) 

Fire Resistance Properties of Hybrid 

Fibers Reinforced High Strength 

Concrete 

JeongSup KIM, CheolHee Cho, 

MyungHwan Yoo, JaeHwan Kim, 

ChangGeun Cho,YoungSuk Shin (Chosun 

U., Gwangju, S. Korea) 

Bayesian Belief Network Model for the 

Deterioration of a Suspension Bridge 

Taejun CHO (Daejin U., Pocheon, S. Korea) 

A Study For The Changes Of The Micro 

Structure By Deterioration Factors For 

NPP 

Concrete Structures KiBeom KIM, Do 

Gyeum Kim, Ho Jae Lee, Jang Hwa Lee, 

(Korea Inst Construct. Tech., Gyeonggi) 


Wednesday 11:00AM-1:30PM Hangzhou Room 

Chairs: G.VanAssche, C.M. Gomez, S.F. Leung, H. Zimmermann 

Studies On Polymer-ZnO Nanowires Composites For Gas Sensing 

Application Shiv Kumar GUPTA, Niranjan Ramgir, Manmeet Kaur, 

Niyanta Datta, Vibha Saxena, Aditee Joshi, Ajay Singh, Dinesh Kumar 

Aswal (Mumbai, India) 

Relations Between Phase Diagram, Kinetics Of Thermal Annealing 

Process, And Morphological Stability In Polymer:Fullerene Blends For 

Bulk Heterojunction Solar Cells Guy VanASSCHE, F. Demir, B. Van 

Mele (Vrije U. Brussel, Belgium), J. Manca, D. Vanderzande (Hasselt U., 

Diepenbeek, Belgium) 

Optimization Of Cellulose Fiber Isolation From Rice Straw And Its 

Application For Thermoplastic Composite Formation Siritorn 

NARKCHAMNAN, Chularat Krongtaew (Mahidol U., Thailand) 

Rheological Behavior Of Epoxy-Amine Systems Modified By Sepiolite 

Clara M. GOMEZ (U. Valencia, Spain), Andres Nohales (Castellon, Spain), 

Paula Felix (U. Valencia) 

Design & Development Of ‘Programmable Transceiver Controller (A 

Nanotechnology Device)’ For Wimax/Wifi Wireless Communication. 

S. Devendra K. VERMA, P. K. Barhai (Birla I.T., India) 

Optical Absorption Of Three-Dimensional Nanoporous Structures 

SiuFung LEUNG, Qingfeng Lin, Miao Yu (Hong Kong U.S.T.,China), 

Kyungmok Kwon (KAIST, S. Korea), Yunze Long (HKUST), Kyoungsik 

Yu (KAIST), Zhiyong Fan (HKUST) 

Advanced Dispersion Strategies And Property Design For CNT/Rubber 

Nanocomposites Heike ZIMMERMANN, Robert H. Schuster (Hannover, 

Germany) 

Polymer Matrix Composites Exhibiting Ultra-High Thermal 

Conductivity Greater Than 500 W/M-K Jyh-Ming TING (Nat. Cheng 

Kung U., Tainan) INVITED 25 min 

1:30PM-2:30PM LUNCH


Wednesday 2:30PM-5:30PM Ballroom 1 

Chairs: L.P. Ding, Z.Q. Huang, J. L. Urrutia, 

L.L. Peng 

Fuzzy Logic based Matrix Crack Detection in 

Thin-walled Composite Beam under Material 

and Fabrication Uncertainties Prashant M. 

PAWAR, Babruvahan P. Ronge 

The Study On A Numerical Controlled Multi- 

PinsInserting System For Z-Pinned Composite 

Laminates Preparation Liping.DING, 

Junwei.Qi, Biao.Yan, Jun.Xiao, Liwei.Wen 

(NUAA, Nanjing, China) 

Mathematical Modeling For Single-Walled 

Carbon Nanotubes (SWCNTs) Based On 

Magneto-Electro-Elastic Beam Model Mei- 

Feng LIU, Tai-Ping Chang(I-Shou U., 

Kaohsiung) 

Evaluation Of Stress Field For An Elliptical 

Inhomogeneity With Imperfect Interface In 

Anisotropic Media C.K. Chan (Hong Kong 

Poly U., China), Z.Q. HUANG, G.H. Nie (Tongji 

U., Shanghai, China) 

A Semidefinite Harmonic Oscillator For 

Seismic Analysis Of Structures In A Complex 

Space. A Physical And Mathematical Shake 

Table J. L. URRUTIA-Galicia (UNAM, 

Mexico D.F.) 

Multi-Sphere Models Of Particles In Discrete 

Element Simulations 

Rimantas KACIANAUSKAS, Darius 

Markauskas (Vilnius Gediminas T.U., Lithuania) 

Traction-Separation Laws On The Application 

Of Cohesive-Zone Models To Delmination 

Behaviour Of Composite Material L.L. 

PENG, X.J. Gong, K.J. Wong(U. Bourgogne, 

Nevers, France), 1,L. Guillaumat (Arts et Metiers 

Paris Tech, France) 


Wednesday 2:30PM-5:30PM Dalian Room 

Chairs: C.L. Yeh, S. Murai, J. Chen, H. Chougule 

Enhancement Of Optical Birefringence In Anisotropic Nanocomposites 

Mediated By Localized Surface Plasmon Resonance Shunsuke 

MURAI, Takuya Tsujiguchi, Koji Fujita, Katsuhisa Tanaka (Kyoto U., 

Japan) 

Self-Organized Nanoporous Structure With Long Range Perfect 

Ordering Qingfeng LIN, SiuFung Leung , Yunze Long, Zhiyong Fan 

(Hong Kong U.S.T., SAR, China) 

Multifunctional and Specific Interactions of MWCNT And Polymer As 

Decisive Parameters For High Performance Of Nanocomposites 

Harishkumar CHOUGULE, Ulrich Giese, Robert H. Schuster (Hannover) 

Fabrication of 2D Silicon Nano-Mold Based On Sidewall Pattern 

Technique 

E. CHENG, Helin Zou, Chong Liu (Dalian U.T., China) 

Rheological Characterization Of Chitosan/Nanowhiskers Composites 

Hugo Lisboa, Joao P. Borges, Goncalo Pereira, Ana M. Ramos, Maria T. 

CIDADE (U. Nova Lisboa, Portugal) 

Nanostructured Dlc Coatings For Self-Assembly Applications 

Enric BERTRAN, V.M. Freire, E.J. Cabrera, C. Corbella, S. Portal, E. 

Pascual,J.L. Andújar (U. Barcelona, Spain) 

Combustion Synthesis Of (Α+Β)-Sialon Composites 

Chun-Liang YEH (Feng Chia U., Taichung) Tues-Thurs evening 



Chairs: Y.Z. Sun, J.J. Hou, P.K. Barhai, 

K. Habib 

Research on the Characteristics of Dielectric 

Barrier Discharge and Dielectric Barrier 

Corona Discharge Yanzhou SUN, Mi Zeng 

(Henan Poly U., Jiaozuo, China),Yan Lu (Henan 

Coal and Chem. Group, Jiaozuo, China) 

Synthesis And Characterization of GaAs 

Nanowires On Amorphous Substrates 

Jared J. HOU 1, Ning Han, Fengyun Wang, Alvin 

T. Hui, Guangcun Shan, Fei Xiu, Tak F. Hung, 

Johnny C. Ho (City U., Hong Kong, SAR, 


Synthesis And Electron Field Emission Studies 

Of Nanocrystalline Diamond Films 

P.K. BARHAI, Rishi Sharma, Vijay Chatterjee 

(Birla I.T., Ranchi, India), N. Woehrl, Volker 

Buck (U. Duisburg-Essen, Germany) 

Well-Alingned And Conductive Carbon 

Nanotube/TiO 2 Film For Flexible 

Photoelectrode Jiangtao DI, Qingwen Li 

(Suzhou Inst. Nano-tech & Bio-tech., China) 

Fabrication And Characterization Of Pure 

Single Walled Carbon Nanotubes 

Microelectrode For Electrochemical 

Measurement XuanViet NGUYEN, Yoshiaki 

Ukita, Yuzuru Takamura (JAIST, Ishikawa, 

Japan) 

Current Properties Depending on 

Temperature of Hydrogenated Silicon 

Oxycarbide 

Teresa OH (Cheongju U., S. Korea) 

Highly Aligned Carbon Nanotube/Polymer 

Composites With Much Improved Electrical 

Conductivities Xuemei SUN, Huisheng Peng 

(Fudan U., Shanghai, China) 

Resistivity/Conductivity of Inorganic Oxides 

by Optical Interferometry Techniques 

Khaled HABIB, Amer Al-Arbeed (KSIR, Safat, 

Kuwait) 



Chairs: Po-Yu Ko, Kihak Lee, E.S. Choi, T. Yu 

Analytical Evaluation For Shear Strength Of 

Beam-Column Connections Strengthened 

With CFRP Composites Kien Le-Trung, 

Kihak LEE (Sejong U., Seoul, S. Korea),Do 

Hyung Lee (Paichai U., Daejeon, S. Korea), 

Luciano Feo (U. Salerno, Italy), David Hui (U. 

New Orleans) 

Reinforcement of Plain Concrete Piers of 

Railroad Bridges using Composite of FRP- 

Steel Plates Eunsoo CHOI, Young-Soo Chung, 

Joonam Park, Baik-Soon Cho (Hongik U.,Seoul, 

S. Korea) 

Behaviour Of FRP-Confined Concrete-Filled 

Steel Tubular Columns Subjected To 

Combined Axial And Cyclic Lateral Loads 

Tao YU, Y.M. Hu, J.G. Teng(Hong Kong Poly 

U., SAR, China) 

Experimental Observation Of Rc Columns 

Strengthened With Stainless Steel Wire 

Do Hyung LEE (PaiChai U., Daejeon, S. Korea), 

Byeong Hwa Kim (Kyungnam U., Kyungnam, S. 

Korea), Sung Hoon Kim (Seoul N.U., S. Korea), 

Jun-Hyeok Choi (Seoul, S. Korea) 

An Experimental Study For Carbonation 

Effect On The Concrete Using MIP and SEM 

Ho Jae LEE, Do Gyeum Kim, Ki Beom Kim 

(Korea Inst Const.Tech., Gyeonggi), Hyung Ju 

Kim (Seoul, Korea) 

A Study On Microstructure Change By 

Carbonation In NPP Concrete 

Do Gyeum KIM, Ho Jae Lee (Korea Inst 

Const.Tech., Gyeonggi), Hyung Ju Kim(Seoul) 

Lateral And Restrained Distortional Buckling 

Of Doubly-Symmetric Steel I-Beams 

Alper Buyükkaragoz, Ilker KALKAN (Kirikkale 

U., Turkey) 

Use of Waste polyethylene as a Concrete 

Additive: Surface Modification of PE by 

Grafting PAM Po-Yu Ko (Nat. Chiayi U., 

Chiayi), Chun-Ku Lu (Nat. Cheng Kung U., 

Tainan),Maw-Tien LEE (Nat. Chiayi U.) 


Wednesday 2:30PM-5:30PM Hangzhou Room 

Chairs: M. Zemko, L.M. Deng, Jarlen Don, G. Chen 

Mechanical Properties Study of Advanced Pultrusion Epoxy 

Composites 

Leiming DENG, Junwei Qi, Jun Xiao, Chong Dou (NUAA, Nanjing, 


Polyethylene: The Next Frontier For Self Reinforced Polymer 

Composites Lucas MORGAN, B. Weager (NetComposites, Chesterfield, 

UK), J. Clarke, N. Thomas (Loughborough U., UK) 

Applications Of Nanotechnology In High Voltage Power Equipment – 

Nanodielectrics George CHEN (U. Southampton, UK) INVITED 25 min 

Processing Of Carbon-Carbon Composites For Aircraft Brake 

Applications 

Jarlen DON, Tsuchin Philip Chu (Southern Illinois U., Carbondale) 

Preparation and Characterization of Pb-free (Na, K)NbO 3-Based 

Ceramics For Eco-Friendly Piezoelectric Device Jeong Seon HAN, 

Hee Chul Lee (Korea Polytech U., Kyunggi) 

Enhancement Of Wear And Impact Property Of Poly(Butylene 

Terephthalate) By E-Beam Process 

Joon-Pyo JEUN, Keum-Jin Ko, Bum-Sik Shin, Hyun-Bin Kim, Young- 

Chang Nho, Phil-Hyun Kang (KAERI, S. Korea) 

Optimization Of Train Seat Frame Made Of Steel-Polyurethane Foam 

Composite Michal ZEMKO, Miroslav Urbanek, Martina Donatova, Jan 

Dzugan, Libor Kraus (COMTES, Dobrany, Czech Rep.)

5:30PM-6:00PM Break 


Wednesday 6:00PM-9:00PM Ballroom 1 

Chairs: R.M. Felfel, V.V. Lepov, Y.S. Su, 

S. Naya 

Multiscale Modeling Of Deformation 

Processes In Situ 

Valeriy V. LEPOV (Yakutsk, Russia), Boris A. 

Loginov (Moscow Inst Electronics, Russia) 

Study Of Dynamic Drop Impact Response Of 

Open-Cell Metal Foam 

Yishi SU, Xiaolu Gong (U.T. Troyes, France) 

Creep-Buckling Failure Of Open-Cell Foams 

Under Uniaxial Compression 

Ting-Jung Chen, Jong-Shin HUANG (Nat. 

Cheng Kung U., Tainan) 

New Statistical Functional Nonparametric 

Methods For Study Of Nanomaterials 

Salvador NAYA, Ramon Artiaga, Mario 

Francisco-Fernandez, Javier Tarrío-Saavedra, 

Jorge López-Beceiro (U. Coruna, Ferrol, Spain) 

Flexural, Shear And Compressive Properties 

Of Bioresorbable PLA-PBG Fibre Reinforced 

Composite Intramedullary Rods R.M. Felfel 

(Mansoura U., Egypt), I. Ahmed, A.J. Parsons, 

G.S. Walker, C.D. RUDD (U. Nottingham, UK) 

Research Of Nanostructural Tool Materials 

Servosurfaces 

A.S. SYROMYATNIKOVA, M.N. Safonova, 

A.A. Fedotov A.A (Yakutsk, Russia) 

Development Of Methods Of Severe Plastic 

Deformation And Research Methods Of 

Ultrafine Steels N.D. PETROVA, A.M. 

Ivanov, Eu S. Lukin (Yakutsk, Russia) 

Use Of Ultradisperse Modifiers For 

Production Of Wear Resistant Powder 

Coatings And Materials 

M.Z. BORISOVA, G.G. Vinokurov, N.F. 

Struchkov, M.I. Vasileva (Yakutsk, Russia) 


Wednesday 6:00PM-9:00PM Dalian Room 

Chairs: A. Cornet, A.J. Nathanael, W.C. Xiao, K. Yusoh 

Possible Electronic Device Applications of Graphene Nanoribbons 

Gengchiau LIANG (Nat. U. Singapore) INVITED 25 min 

ZrN/Hydroxyapatite Nanocomposite Coatings By Co-Sputtering 

Method A. Joseph NATHANAEL, Jun Hee Lee, Sun Ig Hong 

Chungnam N.U., S. Korea) 

The Influence Of Nano-Fillers On The Insulation Properties Of Epoxy 

Resin Qi WANG, George Chen (U. Southampton, UK) 

A Novel Nano-diamond Patterning Technique using Selective 

Nucleation and Growth Weican XIAO, Xi Zhou, Sean Yost, Ramjee 

Balasubramanian, Sacharia Albin (Old Dominion U., Norfolk, VA) 

Nanomechanical Properties Of Polyurethane Nanocomposites Studied 

By Nanoindentation Kamal YUSOH (U. Malaysia Pahang, Kuantan), M. 

Song (Loughborough U., UK) 

Fabrication and Mechanical Properties of MWCNT Epoxy Composite 

Chorng H. TWU (Tainan U.T., Tainan), Chen-Chi M. Ma, Sheng-Yen Wu, 

Yuan-Li Huang, Hsi-Wen Tien, Shin-Yi Yang, Siu-Ming Yuen (Nat. Tsing 

Hua U., Hsinchu) 

Horizontal Suspension of Carbon Nanotubes 

Jianmin MIAO, Jingyu Lu (Nanyang T.U., Singapore) 

Nanowires: Your Laboratory And Theoretical Book To Understand 

Surface Phenomena 

Albert CORNET, J. Daniel Prades, Albert Cirera (U. Barcelona, Spain) 



Chairs: P. Fajfar, S.J. Huang, Y.T. Liu, B. Zhao 

Mechanical Suppression Of Tunneling 

Between Metallic Beads Aymen TEKAYA, R. 

Bouzerar (U. Picardie Amiens, France), V. 

Bourny (U. Picardie) 

Thermal Fatigue Behavior And Cracking 

Characteristics Of Indefinite Chill Iron Rolls 

Peter FAJFAR, Milan Tercelj, Matevz Fazarinc 

(U. Ljubljana, Slovenia), Borut Zuzek 

(Inst.Metals Tech., Ljubljana) 

Mechanical Properties Of Particle Reinforced 

Magnesium Composites SiCp/AZ80 

Song-Jeng HUANG, Chi-Rung Li, Kai-Lun Yan 

(Nat. Chung Cheng U., Chia-Yi) 

The Improvement of Oxidation Behavior of 

Powder Metallurgy Made Fe-Cr Alloys 

Yen-Ting LIU, Shuang-Shii Lian (Nat. Taiwan 

U., Taipei), Wei-Ja Shong, R.Y. Lee (Inst. 

Nuclear Energ Res.) 

A Comparative Study Of Corrosion Resistance On 

Metal Joint By Using Different Types Of Cooling 

Method W.B. Wan NIK (U. Malaysia Terengganu), 

R. Rosliza (TATI U. Coll., Kemaman) , O. Sulaiman 

(U. Malaysia Terengganu), Y. Prawoto (U.Teknologi 

Malaysia), M.F.R. Zulkifli (U. Malaysia Terengganu), 

David Hui (U. New Orleans) 

Structure Of Al87Ni8Dy5 In Amorphous And 

Nanocrystalline State 

S.I, Mudry, Yu.O. Kulyk (Nat. U. Lviv, Ukraine) 

Study Of Cooling Rate Effect On Back-Diffusion 

During Solidification Of Continuously Cast Steel 

Billet 

Jana DOBROVSKA (TU Ostrava, Czech Rep.), 

Frantisek Kavicka (Brno U.T., Czech Rep.), Hana 

Francova, Věra Dobrovska (TU Ostrava) 

SO 2-Gas Corrosion Of Cr 2AlC Compounds 

Sang-Hwan BAK, Min-Jung Kim, Sung-June 

Bong, Seul-Ki Kim (Sungkyunkwan U., Suwon, 

S. Korea) 



Chairs: L. Feo 

Fabrication Of A Microencapsulated n- 

Octadecane Material For Thermal Energy 

Storage D.Z. Chen(Shenzhen 

U.,Guangdong,China), C.P. TSUI, C.Y.Tang 

(Hong Kong Poly U.), H. Zhu, Y.Z. Chen, G.C. 

Yang, Y. Chen (Shenzhen U.), L. Chen (Hong 

Kong Poly U.) 

III-V Compound Semiconductor Transistors 

Heterogeneously Integrated On Si Substrates 

Hyunhyub KO (Ulsan Nat. I. Sci.Tech., S. 

Korea) 

Applications of Microbubble in Aquaculture 

Gilbert Y.S. CHAN (Hong Kong Poly U.), 

Jack Xiao (Ozner Group, Shanghai, China), 

Li Wei, S W Kwok (Hong Kong Poly U.) 

Oxidation Of Nitride Layers Formed On Ti- 

6al-4v Alloys By Gas Nitriding Min-Jung KIM, 

Sang-Hwan Bak, Zhao Chenguang 

(Sungkyunkwan U., Suwon, S. Korea) 

Construction of Surface Piezoelectricity Using 

State-Space Formalism Weiqiu CHEN 

(Zhejiang U., Hangzhou, China) 

A Study Of Early Strength Improvement Of 

Cement Mortar Mixed With Blast-Furnace 

Slag Powder Jinhyoung KIM, Hanseung Lee 

(Hanyang U., Ansan, S. Korea) 

A Study on the Fixed Amount of CO 2 and the 

Estimation Of Production of CaCO 3 on Waste 

Concrete Powder by Wet Carbonation 

Heesung AHN, Hanseung Lee (Hanyang U., 

Ansan, S. Korea) 

Manufacturing Biocomposite Parts Using LRTM 

Jayaraman RAGHAVAN, B. O’Connor (U. Manitoba, 

Canada), G. Kime (Delaware, Canada), B. 

Klimack, J.A. Milne (Carlson, Canada), P. Zanetel 

(New Flyer Ind., Winnipeg, Canada) Mon-Tues 

Highly Efficient Ultraviolet Light Emission From 

Silicon Nanocrystals Naoto SHIRAHATA (NIMS, 

Tsukuba, Japan) Mon-Wed 


Wednesday 6:00PM-9:00PM Hangzhou Room 

Chairs: M. Watanabe, W. Shang, X. Meng, X.R. Zeng 

Hot-Press Fast-Bonded Technology For Prepreg Wiinding 

Biao YAN, Jun Xiao, Liwei Wen (NUAA, Nanjing, China) 

Understandings of Solid Particle Bonding Behaviors in Warm Spray 

Deposition Makoto WATANABE, KeeHyun Kim, Seiji Kuroda (NIMS, 

Tsukuba, Japan) 

SEM Visualization Of CNTS In CNT/Epoxy Composites At Low 

Accelerating Voltage 

Wenjing LI, Wolfgang Bauhofer (Hamburg U.T., Germany) 

Influence Of Z-Pin’s Curing Degree On Properties Of Laminates And 

Its Mechanism Wei SHANG, J. Xiao , P.Z. Cheng, L.M. Deng. Q.Y. Chu 


Fiber-Metal Hybrid Laminates As Structural Material In Towers For 

Offshore Wind Energy Converters J.C. Suarez (U. Poli Madrid, Spain), 

X. MENG (Ocean U. of China, Qingdao), S. Guzman, M.A. Herreros, I. 

Diez (U. Poli Madrid) 

Synergistic Effect Of Phosphorus-Containing Nanosponge On The 

Intumescent Flame Retardant Polypropylene Xuejun Lai, Xingrong 

ZENG, Hongqiang Li, Changyu Yin, Haili Zhang, Kecheng Gong (South 

China U.T., Guangzhou) 

Nanodiamonds From Pulsed Plasma Generated In Water 

Imil A. AKKOZIEV, S.K. Sulaymankulova, A.S. Mametova, J.K. 

Zhasnakunov (KRSU, Kyrgyzstan) 

Self-Organization Of Nanoparticles Of Copper, Silver And Gold In 

Pulsed Plasma In Liquid S.K. Sulaimankulova, Imil A. Akkoziev, A.S. 

Mametova, Bektur K. AKKAZIEV (KRSU, Kyrgyzstan)


Thursday 8:00AM-10:30AM Ballroom 1 

Chairs: A. AlShehri, H.P. Song, G.M. Luo, 

R. Mix 

Preparation And Microstructural 

Characterization Of Carbon /Carbon 

Composite Ramani VENUGOPALAN, D. 

Sathiyamoorthy, A.K. Tyagi (Mumbai, India) 

The Interaction Between A Screw Dislocation 

And A Semi-Infinite Wedge Crack With A 

Nano Circular Inclusion At Tip 

Hao-Peng SONG. Cun-Fa Gao (NUAA, Nanjing, 


A Study on Improvement of Laminate 

Structures Subjected to Low-Velocity Impact 

Guang-Min LUO (Nat. Kaohsiung Marine U., 

Kaohsiung) 

Special Interface Design For Adhesion 

Improvement Renate MIX, Huajie Yin, Joerg 

Friedrich (BAM, Berlin, Germany) 

A Cellular Automata Simulation For The 

Tension Behavior Of Carbon Nanotubes 

X.H. Huang, X.Q. HE (City U., Hong Kong, 


Thermal Radiation Characteristics Of Silicon 

Inverse Opal In Mid Infrared Range 

Jing XU, Yujie Li, Rongsheng Liu, Kai Xie (Nat. 

U. Def.Tech., Changsha, China) 

Dynamic Response Analysis of Shear 

Deformable Laminated Beam with the 

Method of Reverberation Ray Matrix 

F.X. Miao (Ningbo U., China), Guojun SUN 

(Shanghai Jiaotong U., China) 

Tensile And Fracture Behaviour Of Die- 

Drawn Polypropylene-Clay Nanocomposites 

Abdullhadi ALSHEHRI (SABIC, Riyadh, S. 

Arabia), J. Sweeney, P. Caton-Rose, P.D. Coates 

(Bradford U.,UK) 


Thursday 8:00AM-10:30AM Dalian Room 

Chairs: K. Tanaka, T. Endo, T. Yamamoto, A.R. Zainun 

Origin Of Ferromagnetism In Amorphous EuO-TiO 2 Thin Films 

Katsuhisa TANAKA, Koji Fujita, Yanhua Zong, Takahiro Kawamoto, 

Hirofumi Akamatsu, Yoshiro Kususe, Shunsuke Murai (Kyoto U., Japan) 

INVITED 

In-plane Crystalline Orientations of LSMO/ZnO Double Layers 

Tamio ENDO, Kenichi Uehara (Mie U., Japan), Miyoshi Yokura 

(Kawamura Sangyo, Mie, Japan), Katsuhiko Inaba (Rigaku Corp, Tokyo), 

Tomohiko Nakajima, Tetsuo Tsuchiya (NIAIST, Tsukuba, Japan), Hiroshi 

Kezuka (Tokyo U.T.), Kazuhiro Endo (Kanazawa I.T., Japan) INVITED 

Dominant Role Of Grain Boundary Scattering On Carrier Transport 

Of Highly Transparent Conductive Ga-Doped ZnO Films 

Tetsuya YAMAMOTO, Huaping Song, Hisao Makino and Naoki 

Yamamoto (Koichi U.T., Japan) INVITED 

Fabrication And Characterization Of Cu 2O/TiO 2 Composite Films For 

Solar Cell Applications Ayib Rosdi ZAINUN (UiTM, UMP, Malaysia, 

and Nagoya I.T., Japan), Tomoya Sakamoto (Nagoya I.T., Japan), Uzer 

Mohd Noor, Mohamad Rusop (U.Tek MARA, UiTM, Malaysia), Masaya 

Ichimura (Nagoya I.T.) 

Fracture Strength Nanostructured Material Based On Dioxide 

Zirconium Monocrystalline 

Maxim PUGACHEV, Gennadi Moskvitin, Askold Melshanov 

(Inst.Machines Sci, Moscow, Russia) 

Oxidation Of Ni 3Al-(Cr, Zr, Mo, B) Alloy Between 900 And 1100°C In 

Air Seul-Ki KIM, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee 

(Sungkyunkwan U., Suwon, S. Korea) 

The Antibacterial Activities of Ag Doped T-ZnO 

Xing DUAN, Xiaoling Xu, Zuowan Zhou (Southwest Jiaotong U.) 

Session 12b TEXTILE 3 


Chairs: Jing Zhou, J. Militky, P. Dolez, 

C. Ha-Minh 

Nanophase Treatment Of Natural Fiber For 

Fiber Reinforced Polymer Composites 

Sheldon Q. Shi, Jinshu Shi, Kaiwen Liang, Jinwu 

WANG (Mississippi St.U., Starkville) 

Prediction Of Glass Leno Fabrics Porosity 

And Strength 

Jirí MILITKY (TU Liberec, Czech Rep.), 

Jaroslav Dvorak (Res Inst.Textile 

Machinery,Liberec, Czech Rep.), Dana 

Kremenakova, Brigita Kolcavova-Sirkova (TU 

Liberec) 

Electromagnetic Shielding Of Hybrid Weaves 

Veronika SAFAROVA, Jiri. Militky (TU Liberec, 

Czech Rep.) 

Preparation Of Nanocellulosic Powder From 

Jute Fibres By Ball Milling Process 

Vijay BAHETI, Miroslava Marsalkova, Jiri 

Militky (T.U. Liberec, Czech Rep.) 

Factors Affecting the Tearing Resistance of 

Textile Structures 

Patricia DOLEZ, Ennouri Triki and Toan Vu- 

Khanh (Ecole Tech Sup, Montreal, Canada) 

Experimental Investigations Of The Impact 

Behavior Of A Warp Interlock Fabric 

Cuong HA-MINH, François Boussu, Jan Van 

Roey, Toufik Kanit, David Crépin, Abdellatif 

Imad (U. Lille Nord de France) 

Generalized Geometric Model Of 3D Woven 

Preforms From Spun Yarns 

Abdel-Fattah M. SEYAM, Mehmet E. Ince (N. 

Carolina St. U., Raleigh) 

Compatibilizing Effect Of Epoxy On The 

Structure And Properties of PET/PA6 Blend 

Fibers Jing ZHOU, ByungGil Min, JuYeon 

Kim (Kumoh Nat. I.T., Gumi, S. Korea) 



Chairs: S. Al-Malaika, S. Zalis, L. Lapcik, 

M. Ahmad 

Quantum Chemical Modeling Of Spectral 

Properties And Electron Transfer In Extended 

Systems Stanislav ZALIS, Hana Kvapilova 

(ASCR, Prague, Czech Rep.), Irena 

Kratochvílova, Jakub Sebera (ASCR), Antonín 

Vlcek, Jr. (U. London, UK), Rainer F. Winter (U. 

Regensburg, Germany) 

Kinetics And Thermodynamics Of Model 

Colloidal Particle Deposition On Synthetic 

Polymer Surfaces Lubomir LAPCIK, Jr., M. 

Frastík, P. Smolka, B. Lapcikova(Tomas Bata U., 

Zlin, Czech Rep.) 

Defect Induced Hardening And Toughening in 

Mn 3Cu xGe 1-xN Metallic Perovskite 

Yoshinobu NAKAMURA (U. Tokyo, Japan), 

Koshi Takenaka (Nagoya U., Japan), Akira 

Kishimoto (Okayama U., Japan), Hidenori 

Takagi (U. Tokyo, Japan) 

High Molecular Weight Soft Segment based 

Polyethylene Shape Memory Polymers 

M. AHMAD (U. Bolton, UK), B. Xu (Heriot- 

Watt U., Edinburgh, UK), H. Purnawali 

(Nanyang T.U., Singapore), P.J. King, P. Chalker 

(U. Liverpool, UK), Y.Q. Fu (Heriot-Watt U.), 

W.M. Huang (Nanyang T.U.), M. Miraftab, J.K. 

LUO (U. Bolton, UK) chair 

Oxidation Of MoSi 2/SiOC/SiC Composite 

Sung-June BONG, Min-Jung Kim, Sang-Hwan 

Bak, Dong-Bok Lee(Sungkyunkwan U., Suwon) 

Polymer-Containing Catalytic 

Nanocomposites Esfir SULMAN, Valentina 

Matveeva, Mikhail Sulman (Tver T.U., Russia) 

PP-Clay Nanocomposites: Degradation and 

Stabilisation S. Al-MALAIKA, H.H. Sheena 

(Ashton U., Birmington, UK) 


Thursday 8:00AM-10:30AM Hangzhou Room 

Chairs: Liwei Wen, J.S. Rhyee, G.a. Ibrahim, F. Elaldi 

Quasi-One-Dimensional Transport And Thermoelectricity: Peierls 

Distortion In Indium Selenides 

Jong-Soo RHYEE (Kyung Hee U., S. Korea) 

Explosive Welding Of Magnesium Alloy With Aluminum And Stainless 

Steel P. MANIKANDAN, Joonoh Lee, Akihisa Mori, Kazuyuki 

Hokamoto (Kumamoto U., Japan) 

Application of Box-Behnken in Turning of Inconel 718 using PVD 

Carbide Tools under Minimum Quantity Lubrication 

Gusri Akhyar IBRAHIM, Che Hassan Che Haron, Jaharah Abdul Ghani, 

Ahmad Yasir Moh. Said, Moh. Zaid, Abu Yazid (U. Kebangsaan Malaysia, 

Kuala Lumpur) 

A Study On Curing Processes And Environmental Effects For Rapid 

Composite Repair Faruk ELALDI (U. Baskent, Turkey), Pelin Elaldi 

(Bilkent U., Turkey) 

Synthesis Of Superparamagnetic, Photocatalytic Nanocomposites For 

Water Purification Darko MAKOVEC (Jozef Stefan Inst., Ljubljana, 

Slovenia), Marjan Sajko (Maribor, Slovenia), Aljaz Selisnik (Celje, 

Slovenia) c, Miha Drofenik (U. Maribor) 

Research on Automatic Tape Laying of Elliptical Cylinder 

Liwei Wen, Xianfeng Wang, Junwei Qi, Xiaoping Li, Yi Wang (NUAA, 

Nanjing, China), Yurong Chen (Nanjing Medical Secondary Sch., China) 

Resin Flowing Analysis In Sandwich Laminates Under VARTM 

Process Cheng-Hsien CHUNG (United Ship Design Dev Cen, Taipei), Yu- 

Ti Jhan , Ya-Jung Lee,Yu-Chieh Wang (Nat. Taiwan U., Taipei)



Thursday 11:00AM-1:30PM Ballroom 1 

Chairs: Lifang Guo, S.I. Ibekwe, R Noorani, 

M. Todt 

Functional Stability Of SMP Based Syntactic 

Foam Samuel I. IBEKWE (Southern U. Baton 

Rouge, LA), Tao Xu (Southern U. Nanjing, 

China), Guoqiang Li (S.U. Baton Rouge, and 

L.S.U.) 

Design Of Experiments For Improving The 

Tensile Strength Of Rapid Prototyping 

Polymer Materials 

James Clements, Rafiq NOORANI (Loyola 

Marymount U., Los Angeles, Calif.) 

Mechanical Behavior Of Carbon Nano- 

Crystallites Forming Carbon Fibers 

Melanie TODT, Franz G. Rammerstorfer 

(Vienna U.T., Austria), Oskar Paris,Franz D. 

Fischer (Leoben, Austria) 

Interface Fracture Mechanics Of Nanoscale 

Components On A Substrate 

Hiroyuki HIRAKATA, Taku Nishihira, Akio 

Yonezu, Kohji Minoshima (Osaka U., Japan) 

Mechanical Behavior Of Metallic Nanowires 

Containing Vacancy Cluster Defects Pei- 

Hsing HUANG, Lay Gaik Teoh, Yu-Ren Wu, 

Ming-Yue Huang, Hong-Yi Li (Nat. Pingtung U. 

Sci Tech., Neipu) 

Modeling Of Ecological Plastic Lubricant 

Flow Martin VASINA (Tomas Bata U., Zlin, 

Czech Rep.), Lumír Hruzík (TU Ostrava,Czech 

Rep.) 

Compression Fatigue After Impact Testing Of 

Thermosetting Composites 

Volker ALTSTAEDT, Manuel Kempf, Sebastian 

Schwaegele (U. Bayreuth, Germany),Andreas 

Ferencz (Henkel AG, Duesseldorf, Germany) 


Thursday 11:00AM-1:30PM Dalian Room 

Chairs: Y.M.S. El-Shazly, S. Ghosh, P. Chow, Y.R. Wu 

Intravenous Fat Nanoemulsion: a Novel Antidote for Local Anesthetic- 

Induced Systemic Toxicity in Humans Guy Weinberg, Israel 

RUBINSTEIN (U. Illinois-Chicago) 

Kenaf Composition Boards With Termite Resistance 

Poo CHOW (U. Illinois, Urbana), F.S. Nakayama, T.A. Coffelt, S.H. 

Vinyard 

Synthesis And Characterization Of Mesoporous CaO-B 2O 3-SIO 2 

Bioactive Glass Lay-Gaik TEOH, Yu-Ren Wu, Pei-Hsing Huang, Yi Lin 

Huang (Nat. Pingtung U. Sci. Tech., Neipu) 

Synthesis, Characterization And In Vitro Bioactivity Of Sol-Gel 

Derived Mesoporous Bioactive Glass Yu-Ren WU, Lay Gaik Teoh, Pei- 

Hsing Huang, Wei Haw Wu(Nat. Pingtung U. Sci. Tech., Neipu) 

Applications of Cd-Te Quantum Dot Nanoparticles in Bio - Medical 

Research Somesree GHOSHMitra, Nathaniel Mills (Texas Woman’s U., 

Denton, TX), Santaneel Ghosh, Jai N. Dahiya (Southeast Missouri St.U., 

Cape Girardeau). Tong Cai, J.A. Roberts (U. North Texas, Denton) 

Improvement In Functional Properties Of Potato Starch/Nano- 

Cellulose Fibre (NCF) Nanocomposite Films Niranjan R. Savadekar, 

U.S. Annapure, S.T. MHASKE (Inst. Chem Tech., Mumbai, Mumbai, 

India) 

Mechanical Reliability of Bio-Composites from Bovine Teeth 

Yehia M.S. El-SHAZLY (Alexandria U., Egypt), Mariana A. Moussa 



Chairs: X. Landreau, Z. Bouchkour, 

Alessio Perrone, Yanbo LI 

Modulation of Metal-Insulator Transition 

Temperature in W-doped VO2 Thin Films Toward 

Mott Devices Hidefumi TAKAMI, Kenichi 

Kawatani, Teruo Kanki, Shigenori Ueda 1, Keisuke 

Kobayashi1, Hidekazu Tanaka (Osaka U., Japan) 

Deposition Of Nanometric SiO xH yC z Films At 

Different Substrate Temperatures By 

Atmospheric Pressure Microwave Plasma 

Torch (Tia):First Steps Towards Self- 

Assembled 3-Dimensional Nano-Sensors 

Xavier LANDREAU, Briac Lanfant, Thérese 

Merle, Guillaume Bouscarrat, Zakaria 

Bouchkour, Christelle Dublanche-Tixier, Pascal 

Tristant (U. Limoges, France) 

Influence Of The V/Iii Ratio On The Growth Of 

Group Iii Nitride Quantum Dots Deposited On 

Silicon Substrate By Plasma Enhanced Chemical 

Vapor Deposition Zakaria BOUCHKOUR, Pascal 

Tristant, Christelle Dublanche-Tixier, Cedric Jaoul, 

Xavier Landreau (U. Limoges, France), Elsa Thune, 

René Guinebretiere (CEC, Limoges, France) 

Ultraviolet Photodetectors Made By Bridging 

Wide Bandgap Semiconductor Nanowires 

Yanbo LI. Jean-Jacques Delaunay (U. Tokyo, 

Japan) 

Grown Ambient Effect In Gan Crystalline Quality 

On Si(111) By MOVPE Bablu K. GHOSH (U. 

Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan) 

Effect Of Modified-Montmorillonite And Poss On 

Electrical Properties Of Solid Polymer Elecrolytes 

Keun-Byoung YOON (Kyungpook Nat U., Daegu, S. 

Korea), Dong-ho Lee (Dongyang Mirae U., Seoul, S. 

Korea) 

Time-Integrated And-Resolved Mass Spectrometric 

Investigations During Laser Ablation Of Yttrium In 

High Vacuum Alessio PERRONE, F. Gontad, A. 

Lorusso (U. Salento,) 

Nanostructured Mg Thin Films On Cu Substrates 

For Photocathode Applications Carmen RISTOSCU, 

Ion N. Mihailescu (Magurele, Ilfov) 



Chairs: L. Feo, Q.f. Liu, B.H. Kim, 

M.E. Abdullah 

The Characteristics of the Cement Mortar 

with Acetone-treated Rubber Crumbs 

Chun-Ku Lu (Nat. Cheng Kung U., Tainan), 

Liang-Hsing CHOU, Ying-Yu Shiu (Nat. Chia-yi 

U., Minxiong) 

Multi-Phase Modeling Of Ionic Transport In 

Concrete When Subjected To An Externally 

Applied Electric Field Qingfeng LIU, Longyuan 

Li, Jian Yang (U. Birmingham,UK) 

Numerical Modeling Of Double Skin Profiled 

Composite Shear Wall System Under In-Plane 

Monotonic Loadings Shahryar RAFIEI, 

Khandaker M.A. Hossain,Mohamed Lachemi, 

Kamran Behdinan (Ryerson U., Toronto, Canada) 

On The Shear Forces Distribution In 

Double Lap Bolted FRP Joints: 

Numerical And Experimental 

Investigations Francesco Ascione, 

Luciano FEO (U. Salerno, Italy) 

Structural Health Monitoring Of Lattice 

Girder Railway Bridges H.A.D.S. 

Buddika, P.B. Ranjith DISSANAYAKE (U. 

Peradeniya, Sri Lanka) chair 


Thursday 11:00AM-1:30PM Hangzhou Room 

Chairs: P.F. Wang, T. Chen, Huirong Le, S.S. Sharma 

Research On The Deformation Of Prepreg Tape Influenced By The 

Temperature 

Xianfeng WANG, Liwei Wen, Junwei Qi, Xiaoping Li, Yi Wang (NUAA, 

Nanjing, China), Yurong Chen (Nanjing Medical Secondary Sch., China) 

Mechanical and Tribological Properties of Epoxy-CNT Nanocomposite 

Coatings Huirong. LE (U. Plymouth, UK), A. Howson, M. 

Ramanauskas (U. Dundee, UK) chair 

Thermomechanical And Precipitation Hardening Of Stir-Cast Silica 

Reinforced Aluminium Alloy Matrix Composites 

S.S. SHARMA, K. Jagannath, N.S. Mohan, Chandrashekhar Bhat, P.R. 

Prabhu, R.C. Chadaga (Manipal Inst. Tech., India) 

Prediction of Sound Attenuation Characteristics of Muffler 

Chandrashekhar BHAT, S.S. Sharma, K. Jagannath, N.S. Mohan (Manipal 

Inst.Tech., India), S.G. Sathisha (QUEST, Bemgaluru, India) chair 

Performance Comparison Of Carbide And HSS Drills In Drilling Of 

GFRP Composite Materials- An Experimental Study Using Design Of 

Experiments B.R.N. MURTHY, Lewlyn L. R. Rodrigues, D. Anjaiah 

Carbon Nanotube Fiber For Photovoltaic Application 

Tao CHEN, Zhibin Yang, Huisheng Peng (Fudan U., Shanghai, China) 

Improvements To The Design Of A Particle Beam Cluster Source For 

Nanofabrication Stuart Thornton, Chris Binns, Shian GAO 

Chalcogenide Microsphere Fabricated From Fibre Taper-Drawn Using 

Resistive Heating Pengfei WANG, Gilberto Brambilla (U. Southampton, 

UK), Yuliya Semenova,Qiang Wu, Gerald Farrell (Dublin 

Inst.Tech.,Ireland)

1:30PM-2:30PM LUNCH 


Thursday 2:30PM-5:30PM Ballroom 1 

Chairs: J.D. Yau, Sergey A. Kostyrko, S.H. Ni, 

S.R. Kuo 

Application Of Hilbert-Huang Transform To 

The Signal Analysis Of Sonic Echo Testing 

Sheng-Huoo NI, Li-Ting Hsu (Nat. Cheng-Kung 

U., Tainan) 

Effect Of Porosity On Impact Strength Of 

Vitrified Bond Diamend Wheels 

Yong-gai Hou, Fu-ren XIAO, Gui-ying Qiao 

(Yanshan U., Qinhuangdao, China), Wen-jun Zou 

(Henan U.T., Zhengshou, China), Bo Liao 

(Yanshan U., China) 

Applicability Of Gibbs Adsorption Equation 

To Deformed Solid Surfaces Emmanuel M. 

GUTMAN (Ben-Gurion U. Negev, Israel) 

A Boundary Perturbation Analysis For A 

Multilayer Film Coating Sergey A. 

KOSTYRKO, M.A. Grekov (St. Petersburg State 

U., Russia) 

Exact Solution Of Edge-Bending Buckling Of 

Rectangular Orthotropic Plates Shyh-Rong 

KUO (Nat. Taiwan Ocean U., Keelung), J.D. Yau 

(Tamkang U., Taipei) 

Magneto-Elastic Response Of Rectangular 

Orthotropic Plates Due To Multi-Lane Moving 

Loads 

Jong-Dar YAU (Tamkang U., Taipei) 

BGA Impact Analysis: Numerical Study 

Rasha M. Soliman, Medhat Awad El-Hadek, 

Shaban Ibrahim ABDOU (Port-Said U.,Egypt) 

On Different Projectile Nose Shapes in Soil 

And Foam Penetration 

Ce XU, Fenghui Wang, Shaoming Wang, Tiejun 

Liu (Northwestern Polytech.U., Xi’an, China) 


Thursday 2:30PM-5:30PM Dalian Room 

Chairs: K. Talukdar, P.X. Feng, Jiqing He, Yu Teng 

Carbon Nanotube / Poly(Vinyl Alcohol) Composites Formed By Spray 

Winding Wei LIU, Yiping Qiu (Donghua U., Shanghai, China), Qingwen 

LI (Suzhou Inst. Nano-Tech and Nano-Bionics, China) 

A Prototype of Functional Nanowires-based 3D Biosensor Arrays 

Peter X. FENG (U. Puerto Rico) 

Effect Of Hot-Stretching Process On The Electrochemical Performance 

Of Sn at CNFs Composite Anode Materials For Li-Ion Batteries 

Xin LI, Yunhua Yu,Bingxue Liu,and Xiaoping Yang (Beijing U. 

Chem.Tech., China) 

Nano Fe 3O 4 Particles Addition Effects On YBa 2Cu 3O 7-δ 

Superconducting Properties Wei KONG, Siti Nurdalila (Kuala Lumpur 

Infrast. U.C., Malaysia), Ing Kong (RMIT,Melbourne, Australia), R. Abd- 

Shukor (U. Kebangsaan) 

Preparation Of Polylactide Grafted Nano-Hydroxyapatite Via ATRP 

Jiqing HE, Zenghui Wang, Fujian Xu, Yuanchao Li, Qing Cai, Xiaoping 

Yang(Beijing U. Chem.Tech., China) 

Preparation Of Fe 3O 4/Cap Core-Shell Nanoparticles Exhibiting Good 

Magnetism And Bio-application Yu TENG, Qing Cai, Zhou Fang, Keyu 

Li, Xiaoping Yang(Beijing U. Chem.Tech., China) 

Study Of The Sn/C Nanofibers With Different Sn Contents For Anode 

Materials In Lithium-Ion Batteries Keyu LI, Yunhua Yu, Yu Teng, Xin 

Li and Xiaoping Yang(Beijing U. Chem.Tech., China) 

Compressive Behavior Of Filament Wound Carbon Fiber/Epoxy 

Composite Tubes With Different Winding Angles Gang CHEN, Gang 

Li, Jinming Zhu, Feng Wen, Yunhua Yu, Xiaolong Jia, Xiaoping Yang 

(Beijing U. Chem.Tech., China) 

Simulation Study Of A High Performance Metal-Oxide Carbon 

Nanotube Field Effect Transistor Keka TALUKDAR, Apurba Krishna 

Mitra (Durgapur, India) 



Chairs: S.K. Bose, C.H. Wong, P.G. Li, 

S.G. Yoon 

On The Suitability Of Some Cr-Based 

Chalcogenides And Pnictides As Spintronic 

Materials - Density Functional Results Yong LIU 

(Yanshan U., Qinhuangdao, Hebei, China), Shyamal K. 

Bose (Brock U., St. Catherines, Canada), J. 

Kudrnovsky (ASCR, Prague, Czech Rep.) 

Magnetism of Quaternary Heusler Alloys: 

(Cu,Ni)2MnSn as a Case Study 

Shyamal K. BOSE (Brock U., St. Catharines, Ontario, 

Canada), J. Kudrnovsky, V. Drchal (Czech Acad Sci, 

Prague) 

Molecular Dynamics Simulation For Ultrathin 

Lubricant Nanofilms With Nonfunctional And 

Functional End Groups B. Li, Chee How WONG 

(Nanyang T.U., Singapore),S.K. Yu, W. Hua, W.D. 

Zhou (Data Storage Inst., Singapore) 

Optoelectrical Properties of CdSe-Au Nanorod 

Networks Peigang LI, Alexandros Lappas (IESL- 

FORTH, Heraklion, Greece), Romain Lavieville, Yang 

Zhang, Roman Krahne (Italian Inst.Tech., Genoa) 

A Giant Dielectric Permittivity of BMNO-Bi 

Composite Films Grown At Room Temperature By 

Radio-Frequency Sputtering Hyun-June Jung, 

Hyun-Ah Song, Soon-Gil YOON (Chungnam Nat. U., 

Daejeon, S. Korea) INVITED 25 

InGaN-Based MSM Photodetectors With 

Transparent Ga-Doped ZnO Electrodes 

P.C. CHANG (Kun Shan U., Yong-Kang, Tainan), A.N. 

Tu (Nat. Cheng Kung U.,Tainan), K.H. Lee (Hsinchu) , 

C.L. Yu, S.J. Chang (Nat. Cheng Kung U.) 

Growth and Micro Waves Characterizations of BST 

and BST/BZN Hetero Structures Thin Films 

Denis Remiens (U. Valenciennes, France), Lihui YANG 

(Shanghai Inst. Ceramics, SICCAS, China), F. Ponchel, 

C. Soyer, J.F. Legier (U. Valenciennes), G. Wang, X. 

Dong (SICCAS, China) 

Preparation And Properties Of Magnetite–Carbon 

Nanotube Reinforced Polypropylene-Natural 

Rubber Blends Ing KONG, Robert Shanks (RMIT, 

Melbourne, Australia), Sahrim Ahmad, Lih-Jiun Yu 

(UKM, Selangor, Malaysia) 



Chairs: S.H. AlSayed, F.M. Cheng, N.M. Nor, 

C. Galan-Marin 

Environmental Effects On Polymer Insulators 

Ibrahim O. HABIBALLAH (King Fahd U. Pet. 

Min, Dhahran, S. Arabia) 

Numerical Study for CFRP Strengthening of 

RC Columns for Blast Resistance 

Saleh H. ALSAYED, Husain Abbas, Yousef Al- 

Salloum (King Saud U., S. Arabia) 

Application Of Ant Colony Algorithm In 

Discrete Optimal Design Of Structural Truss 

Yancang LI, Lina Zhao (Hebei U. Engineering, 

Handan, China) 

Research On Concrete Mixing Sequence At 

The Time Of Feeding 

Fangmeng CHENG, Yancang Li, Lei Wang 

(Hebei U. Engineering, Handan, China) 

Load Test on Reinforced Concrete Beams 

Strengthened by Carbon Fibre Laminated 

Plates—A Case Study 

Humayun R. H. KABIR (Kuwait U., Safat) 

Analysis Of Sandwiched Composite Long- 

Span Foldable Beam 

Norazman M. NOR, Agusril, Alias Yusof, Risby 

Sohaimi, Ahmad M.A. Zaidi (UPNM, Nat Def. 

U. Malaysia) 

Characterization Of Polymer Mortars Exposed To 

Some Acid Solutions. 

C. GALAN-MARIN; C. Rivera-Gomez (U. Sevilla, 

Spain) 

Bending Performances And Stiffness of FRP-steel- 

Concrete Composite T-Beams With 

Prefabricated BFRP Shell 

Hong Zhu, Pu Zhang, Gang Wu, Zhishen 

Wu(Southeast U., Nanjing, China) 

Bending Performances And Stiffness Of Frp-Steel- 

Concrete Composite T-Beams With Prefabricated 

BFRP Shell Hong ZHU, 

Pu Zhang, Gang Wu, Zhishen Wu (Southeast U., 

Nanjing, China) 


Thursday 2:30PM-5:30PM Hangzhou Room 

Chairs: O. Soykasap, D. Rincon, C.R.C. Lima, I.R. Mustapa 

High Thermal Conductivity Diamond Composites 

F.M. SHAKHOV (Ioffe, St. Petersburg, Russia), A.M. Abyzov (St. 

Petersburg Inst.Tech., Russia), S.V. Kidalov (Ioffe, St. Petersburg) 

Testing Of 2m Offset Thin-Shell Reflector Demonstator 

Omer SOYKASAP, Sukru Karakaya (Afyon Kocatepe U., Turkey) 

Application Of The Scourer Or Luffacylindrica Under Natural, Rigid 

And Flexible Resin To Obtain A Natural Composite Material Daniela 

RINCON P, Carlos A. Guerrero F, Fabio E. Sierra, Eliana Guerrero- 

Romero (U. Colombia) 

Evaluation Of Thermal Sprayed Polymers For Tribological 

Applications Carlos R. C. LIMA, Lucas P. Siqueira (UNIMEP, SP, Brazil), 

Flávio Camargo (OGRAMAC, SP, Brazil) 

Investigation Of Powder Metallurgy Application For Uncooled 

Turbines Herny EMILIE (Toulouse, France), Xinhu Wu (U. Birmingham, 

UK), Jean-Francois Rideau (Toulouse, France) 

Hereditary Type Model For Mechanical Behavior Of Viscous Polymers 

Sofia ALEXEEVA, Alexander Mosin (Moscow, Russia) chair 

Improved Mechanical Properties Of Aluminium/Epoxy Composites 

Through Silane Functionalization Of Aluminium Powder Jorge Ivan 

CIFUENTES, Jason Marroquin (Kyung Hee U., Yongin, S. Korea) 

Nanostructured Composites: Potential Materials For Organic Light 

Emitting Diodes And Organic Solar Cells NGUYEN Nang Dinh, Dinh 

Van Chau, Do Ngoc Chung, Nguyen Phuong Hoai Nam (Vietnam Nat. U. 

Hanoi), Tran Quang Trung (Vietnam Nat. U., HCM city)

5:30PM-6:00PM Break 


Thursday 6:00PM-9:00PM Ballroom 1 

Chairs: N. Allen Yu, C. Bal, A. Yasin, W.Z. Dai 

The Frictional Effects In Harmonic Circuit 

Carmen BAL, Carmen Ioana Iuhos, Nicolae Bal 

(TU Cluj Napoca, Romania) 

The Blind Hole Influence In The Residual 

Stresses Determination 

Nicolae BAL, Carmen Ioana Iuhos, Carmen Bal 

(TU Cluj Napoca, Romania) 

Maximum Amplitude of Solutions on a Ball 

for a Generalized Lane-Emden Equation 

Abeer YASIN (U. Western Ontario, Canada) 

Optimal Vibration Control of Smart Fibre 

Reinforced Polymer Spherical Shells 

Debabrata CHAKRABORTY, Tarapada Roy 

(Indian Inst. Tech. Guwahati) 

A Numerical Method for Studying Thermal 

Deformation in 3D Double-Layered Thin 

Films with Imperfect Interfacial Thermal 

Contact Exposed to Ultrashort-Pulsed Lasers 

Runzhou Liu, Weizhong DAI (Louisiana Tech. 

U., Ruston) 

Numerical Analysis of a Transversal Crack in 

a Steel Slab 

Frantisek KAVICKA, Jana Dobrovska, Karel 

Stransky, Bohumil Sekanina, Josef Stetina (Brno 

U.T., Czech Rep.) 

Delamination Analysis At Free Edges Of 

Composite Laminates Bosko RASUO. Mirko 

Dinulovic (U. Belgrade, Serbia) 

Fracture And Fatigue Of CNT-Reinforced 

Composites Z.H. Zhang, N. Allen YU, M.M. 

Huang, K.K. Hsu (Yuan Ze U., Taoyuan) 


Thursday 6:00PM-9:00PM Dalian Room 

Chairs: B. Suresha, H. Musa, A.N. Banerjee, H. Hamdy, N.M. Renukappa 

Synthesis And Characterisation Of Polymer-Stabilised AuNP 

Haruna MUSA (Bayero U., Nigeria), Terence Cosgrove (U. Bristol, UK), 

Erol A. Hasan (U. Liverpool, UK), Abdullahi A. Kogo (Ahmadu Bello U., 

Zaria, Nigeria), Hamza Abba (Ahmadu Bello U.) 

Effect Of Low-Aspect Ratio On The Enhanced Field-Emission 

Properties Of Densely-Packed Ni-Nanowire Arrays Electrochemically 

Grown Through Porous Alumina Membrane Arghya N. BANERJEE, 

Sang Woo Joo (Yeungnam U., S. Korea) 

Fabrication of Transparent TiO 2 Nanotubes-Film on FTO Glass By An 

Electrophoretic Deposition Process Yulong LIAO, Wenxiu Que, Jin 

Zhang, Peng Zhong (Xi’an Jiaotong U., China) 

Cr Nanostructures Fabricated Based On Porous Anodic Alumina 

Membranes Hany HAMDY (Beni-Suef U., Egypt), Sang-Wan Ryu 

(Chonnam N.U., Gwangju,S. Korea), Mohamed Shaban (Ben-Seuf U.) 

Strain Rate Effect On The Mechanical Properties Of Carbon 

Nanotube/Epoxy Composites Yi-Ming JEN (Nat.Taiwan Ocean U., 

Keelung), Chien-Yang Huang, Pei-Ling Guo,Yung-Chuan Wang (Chung 

Hua U., Hsinchu) 

Properties Of Compression Moulding Starch –Nanoclay Biocomposites 

Ahmad ZURAIDA, H. Anuar (IIUM, Kuala Lumpur, Malaysia) 

Role Of Silicon Dioxide Filler On Dry Sliding Wear Behaviour Of 

Epoxy Nanocomposites B. SURESHA, R.M. Devarajaiah 

(Nat.Inst.Engrg., Mysore, India), K.N. Shivakumar (NCAT, Greensboro, 

NC), Kishore (Indian Inst.Sci., Bangalore), S. Seetharamu,P. 

Sampathkumaran (Central Power Res.Inst., Bangalore) 

Effect of Montmorillonite Nanoclay Filler on Surface Degradation 

Properties of Epoxy-Based Nanocomposites N.M. RENUKAPPA, 

Rashmi, C. Ranganathaiah,Siddaramaiah (Mysore, India) 



Chairs: K. Jagannath, M. Sob, B. Fischer, 

Xiulan Hu 

Strength And Magnetism Of Nanocomposites 

Formed By 3d-Metal Nanochains Embedded 

In A Non-Magnetic Matrix Mojmir SOB 

(Masaryk U., Brno, Czech Rep.), T. Kana 

(ASCR, Czech Rep.) 

Further Development Of Oxide Dispersion 

Hardened Platinum Alloyswith Improved 

Strength At High Temperatures Bernd 

FISCHER (U. Applied Sciences, Jena, Germany), 

Uwe Jantsch, Michael Koch (Hanau, Germany) 

Strengthen Mechanism Of In Situ TiB/TiC 

Reinforced Ti 1100 Composites And Finite 

Element Analysis Fei ZHAO (Shanghai 

Jiaotong U., China), Xiaolu Gong (UT Troyes, 

France), Di Zhang (Shanghai Jiaotong U.) 

A Novel Discharge Technique For Noble.Metal 

Nanoparticles Xiulan HU, Osamu Takai, Nagahiro 

Saito (Nagoya U., Japan) Wed-Fri 

Evolution Of Goss Orientation During Rapid 

Heating For Primary Recrystallization In Grain- 

Oriented Electrical Steel Eun-Jin LEE, Sung-Ji 

Choi, No-Jin Park (Kumoh Nat. I.T., Gumi, S. Korea) 

Effects Of Initial Microstructure On The 

Development Of Microstructure And Mechanical 

Properties In Energy Saving AZ31 Magnesium 

Alloy During Hot Rolling No-Jin PARK, Sun-Hea 

Hwang and Chang-Wan Ha (Kumoh Nat. I.T., Gumi, S. 

Korea) 

Volatile Organic Compound Gas Sensor Based On 

Meso-/Macro Porous Semiconducting Metal Oxide 

Duc Hoa NGUYEN, Sherif A. El-Safty (NIMS, 

Ibaraki, Japan) chair 

Stir Casting Technique For Low Melting Point 

Metal Matrix Composites And Characteristic Study 

K. JAGANNATH, S.S. Sharma, N.S. Mohan, P.R. 

Prabhu (Manipal, India) 

Thermomechanical Structuring Of Steel For 

Fabrication Of Ultrafine Grained Or 

Nanocrystalline Materials Maria Z. BORISOVA, 

S.P. Yakovleva, S.N. Makharova(Yakutsk, Russia) 

Session 15c MAGNETIC 9 


Chairs: Jon-Ho Jeun, P. Yarlagadda, J.M. Kim 

Effect Of Substrate Temperature On Physical 

Properties Of Nanostructured Cds Thin Films 

Prepared By Spray Pyrolysis Technique 

N. Memarian, S.M. Rozati (U. Guilan, Iran) Thurs-Fri 

Static And Dynamic Strain Sensing Using A Polymer 

- Carbon Nanotube Film Strain Sensor Michael K. 

Njuguna, Cheng Yan, John M. Bell, Prasad 

YARLAGADDA(Queensland U.T., Brisbane, 

Australia) Thurs-Fri 

Effect Of CdSe Nanoparticle In P3HT:PCBM 

Organic Solar Cell Mijung CHOI (Myongji U., 

Gyeonggi, S. Korea), Honghong Fu, Weiling Luan 

(East China U.Sci.Tech., Shangha), Yong-Sang Kim 

(Myongji U.) Wed-Fri 

Organic Thin Film Transistor Memory Based On 

CdSe Nanoparticle/PMMA Blend as a Tunneling 

Layer Jung-Min KIM, Dong-Hoon Lee, Jun-Ho 

Jeun, Hyun Ho Lee (Myongji U., Gyeonggi, S. Korea), 

Sung Sik Ko, Ik-Jun Yeon (Chungju N.U., Chungbuk, 

S. Korea), Yong-Sang Kim (Myonggi U.) Wed-Fri 

Microfluidic PCR CHIP Integrated With MCU 

Controlled Temperature System 

Dawoon HAN, Mijung Choi, You-Cheol Jang, Kamrul 

Islam, Rohit Chand, Sandeep K. Jha (Myonggi U., 

Gyeonggi, S. Korea), SungSik Ko, Ik-Jun Yeon 

(Chungju N.U., Chungbuk, S. Korea), Yong-Sang Kim 

(Myunggi U.) Wed-Fri 

A Study Of The Hysteresis Mechanism Of Organic 

Thin Film Transistor With Poly(4-Vinylphenol) 

Gate Insulator Jon-Ho JEUN, Jung-Min Kim, Dong- 

Hoon Lee(Myongji U., Gyeonggi, S. Korea), Sung Sik 

Ko, Ik-Jun Yeon (Chungju N.U., S. Korea),Yong-Sang 

Kim (Myongji U.) Wed-Fri 

Physicotechnological Peculiarities Creating A New 

Class Of Piezoelectric Materials Based On The 

Hybrid Of Matrix Nano- And Micropiezoelectric 

Composites M.K. Kerimov, M.A. Kurbanov, A.A. 

BAYRAMOV, I.S. Sultanakhmedova, F.N. Tatardar, 

A.A. Mextili, G.Ch. Gulieva, I.N. Orudjev (Nat. Acad. 

Sci, Azerbaijan) 


Thursday 6:00PM-9:00PM Hangzhou Room 

Chairs: W. Kong , W.B. Wan Nik, B.K. Ghosh, A.K. Tyagi, 

Fabrication of Conjugated Polymer and Metal Nanoparticle 

Composites toward Sensing Applications 

Hsing-Lin WANG, Ping Xu, Chen-Yu Kuo, Nathan H. Mack(Los Alamos 

N.L., NM) 

Grown Ambient Effect In Gan Crystalline Quality On Si(111) By 

MOVPE 

Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan) 

Chemistry Of Some Oxide Based Nanomaterials For Energy 

Conversion Applications 

A.K. TYAGI (Mumbai, India) INVITED 25 min 

SOM Based Segmentation Method to Identify Water Region in 

LANDSAT Images 

Win KONG, V.J. Tiagrajah (U. Tenaga Nasional, Selangor, Malaysia) 

Monitoring Composite Blade of Vertical Axis Wind Turbine using Self 

Organizing Map 

Ming Li, Ayo ABATAN (Miami U., Oxford, Ohio) 

Increasing The Octane Number Of Gasoline Using Praseodymium(Iii)- 

Ethylene Diamine Tetra Acetate/Activated Clinoptilolite Zeolite 

Dewi TRISTANTINI, Eny Kusrini, Vino Hasyim (U. Indonesia, Depok) 

Friction Coefficients Of Boron Mixed Brake Pads 

A.M. Muzathik, Y.B. Mohd Nizam (U. Malaysia Terengganu), Y. Prawoto 

(U. Moratuwa, Sr. Lanka), M.F. Ahmad, W.B. Wan Nik (U. Malaysia 

Terengganu) 

Thermoplastic Elastomer Composites for Barrier Applications 

Junling ZHAO (Goodyear Tire & Rubber, Akron, OH)


Friday 8:00AM-10:30AM Ballroom 1 

Chairs: Yin Yu, K.M. Gupta, R.H. Oskouei, 

H. Abral 

Effect Of Poisson’s Ratio On Flexibility Of 

Smooth Orthotropic Pipe Bend 

K. M. GUPTA (Motilal Nehru Nat.Inst.Tech., 

India) 

Load-Displacement Behaviour of AA 7075-T6 

Holed And Clamped Plates At Different 

Environmental Temperatures R.H. 

OSKOUEI, Joe Elambasseril, R.N. Ibrahim 

(Monash U., Clayton, Australia) 

Tensile Strength of Pandanus Odoratissimus 

Fibers Reinforced Unsaturated Polyester 

Composite Hairul ABRAL, Heri Andriyanto, 

Ilhamdi (U. Andalas, Indonesia) 

Meshless Methods For The Quasi-3d Analysis 

Of Functionally Graded Elastic Cylinders 

Chih-Ping Wu, Shih-Wei Yang (Nat. Cheng 

Kung U., Tainan) 

Modeling Of Creep Behaviour Of A 

Composite Material Ahmed KOUADRI- 

Boudjelthia (Chlef, Algeria), A. Bouabdallah 

(Algiers, Agleria), M. Tahar Abbes (Chlef, 

Algeria) 

Effect of Debonding Damage on the 

Mechanical Properties of a Particulate 

Reinforced Dental Composite Y.P. CHAN, 

C.Y. Tang (Hong Kong Poly U., China) Thurs- 

Friday 

The Research Of Debonding Damage 

Identification For Foam Core Sandwich Using 

Wavelet Packet Energy Method Yin YU, Hai 

Wang (Shanghai Jiaotong U., China), Ai-ying 

Zhao (COMAC, Shanghai, China) Thurs-Fri 

Nonlinear Modeling And Optimization Of 

Parameters For Viscoelastic Composites 

AnNanocomposites Brian Dandurand, Irina 

VIKTOROVA (Clemson U., SC), Sofia Alexeeva 

(Moscow, Russia) 


Friday 8:00AM-10:30AM Dalian Room 

Chairs: Liming Xu, R.H. Schuster, A. Aldalbahi, Chao Lin 

Fabrication of Poly(propylene carbonate)/Gelatin Composite via 

Layer-by-Layer Assembly for Cytocompatibility Assessment 

Xia ZHONG, Fariba Dehghani (U. Sydney, Australia) 

Preparation And Characterisation Of Conducting Biopolymer-Carbon 

Nanotube Composite Materials Ali ALDALBAHI, Marc in het Panhuis 

(U. Wollongong, Australia) 

Are NHANES Reference Data Applicable to the Taller Canadian 

Children? FILLER, Abeer Yasin (U. Western Ontario, Canada) 

Multifunctional Cationic Superparamagnetic Nanoparticles For Gene 

Delivery And Imaging Chao LIN (Tongji U., Shanghai, China), 

Qianqian Ma (Tongji Hospital), Bo Lou (Tongji U.) 

Nanocomposite Thin Layers Synthesized By Advanced Pulsed Laser 

Technologies For Biomimetic Implant Coatings 

Ion N. MIHAILESCU (Ilfov, Romania) 

Noise Corrected Imaging Plate Scanner – An Ideal Electron Detector 

For Transmission Electron Microscopy Petra BELE (TU Munich, 

Germany) 

In Vivo And In Vitro Toxicity Of Ag-Nps-Containinghydrogel In 

Reproductive Organs And In Hela Cells Liming XU, Liang Chen, 

Xuefei Li, Zhe Dong (Nat. Inst Food Drug Control, Beijing, China), Gang 

Wu (Inner Mongolia U. Sci Tech, Baotou, China),Chunren Wang, Tingfei 

Xi (Beijing, China) 

Metal On Metal Bearings: Evaluation Of The Potential Risks In Clinical Use 

And The Associated Data Management Issues Challenging Prospective Risk 

Analysis James Smith, eter Smitham, Liping Qi, Simon GRANGE (U. Calgary, 

Canada) 



Chairs: J. Purmensky, P.S. Robi, Y. Kobayashi, 

Mechanical Properties of Al-Cy-Mg Alloys 

Micro-Alloyed with Sn P.S. ROBI, A. 

Srinivasana, Sanjib Banerjee (Indian I.T., 

Guwahati) 

Characteristics of CrAlSiN Coatings With 

Post-Deposition Annealing Treatment 

Wei-Yu HO, Chi-Wei Chen, Chia-Hang Tsai, Da- 

Yung Wang (MingDao U., ChangHua) 

Residual Stress Measurement On 2024 

Aluminum With Different SMAT Treatments 

Hao JIANG, Ka Po Cheung, Limin Zhou (Hong 

Kong Poly U., China), Jian Lu(City U., Hong 

Kong, China) 

Metal-Metal Bonding Process Using Copper 

Nanoparticles 

Yoshio KOBAYASHI, Satoshi Ishida, Kazuaki 

Ihara (Ibaraki U., Japan), Yusuke Yasuda, 

Toshiaki Morita (Hitachi Ltd, Japan) Wed-Fri 

Phase Separation Related To Medium Range 

Order In Crystallization of Al 83Ni 8Si 2Ce 7 

Metallic Glass Shanghai WANG, C.C. Yang 

(Hebei U. Engineering, Handan, China) 

Effects Of Electro-Discharge Machining 

Parameters On Surface Integrity Of 

Aluminium Composite 

A.M. ABDUL-RANI, A. Mouangue Nanimina 

(U.T. Petronas, Perak, Malaysia) 

Structure And Mechanical Properties Of 

Ultra-Fine Grain Titanium 

Miroslav Greger, Jaroslav PURMENSKY (T.U. 

Ostrava, Czech Rep.) 

An Analysis Of The Transverse Strength Of Ti- 

Based Matrix Composite Reinforced By SiC Fiber 

Bing ZHAO, HongLiang Hou, JinHua Liao, Bo Jiang 

(Beijing Aero. Manuf.Res.Inst., China) 



Chairs: T. Ngai, C.Y. Low, V.R. Gaval, S.K. 

Varma 

Pressure-Volume-Temperature Of Neat 

Polyvinyl Alcohol And Blending With 

Cassava Starch Compound 

Chong-Yu LOW, Tin-Sin Lee (UTAR, 

Kuala Lumpur, Malaysia) 

Effect Of Particle Size And Concentration 

Of Mica On Properties Of 

Polytrimethylene Terepthalate Vivek. R. 

GAVAL, R.S.N. Sahai, S.P. Deshmukh, P.A. 

Mahanwar (Inst. Chem. Tech., Mumbai, 

India) 

Effect of Cr on the Oxidation Resistance 

Of Nb-Cr-Mo-Si-B Alloys S.K. 

VARMA, Benedict Portillo (U. Texas El 

Paso) 

The Effects of Functionalized Graphene 

Sheet on The Properties of Poly (ethyl 

methacrylate) Su-Jin HAN, Seong Min 

Oh, Hyung-il Lee, Han-Mo Jeong (U. 

Ulsan, S. Korea) 

Fire Retardation Effect Of Graphite 

Oxides On Epoxy Resin Kyung Min OH, 

Yu Rok Lee, Soon Cheol Kim, Hyung-il 

Lee, Han-Mo Jeong(U. Ulsan, S. Korea) 

Hierarchical Porous Materials 

Templating from Nanoparticle-Stabilized 

Emulsions 

To NGAI, Zifu Li (Chinese U. Hong Kong) 

Stimuli-Responsive Polymer Nanofiber with 

Inorganic Nanoparticle Wen-Ju CHUANG, 

Wen-Yen Chiu (Nat. Taiwan U., Taipei) Wed-Fri 


Friday 8:00AM-10:30AM Hangzhou Room 

Chairs: R.S.N. Sahai, F.A. Harraz, Y.F. Luo, A.A. Ali 

Silicon-Conjugated Polymers Nanocomposites Fabricated By A Two- 

Step Electrochemical Approach 

Farid A. HARRAZ, Aliaa M. Salem (CMRDI, Cairo, Egypt) 

Characterization Of Carbon Fibres Reclaimed From Steam-Thermal 

Recycling Process 

Shengyin YE, Arezki Bounaceur, Yannick Soudais, Radu Barna (Ecole des 

Mines d’Albi, France) 

Important Design Elements of Large Flexible Ferris Wheels 

Yongfeng LUO, Jie Bai, Xiaonong Guo (Tongji U., Shanghai, China) 

Wet Electrospun CuNP/Carbon Ultra Fine Coils for Super Air Core 

Inductors Awad Kh. Al-ASMARI (King Saud U., Saudi Arabia), Ashraf 

A. Ali (Al-Khari U.,Saudi Arabia) 

Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential 

Application for Micro Surface Mounted Components 

Ashraf A. ALI (Al-Kharj U., S. Arabia),Awad Kh. Al-Asmari (King Saud 

U., Saudi Arabia) 

Nano Loop Optical Antenna 

Hengjiang Ren, Zhongxiang SHEN (Nangyang T.U., Singapore) 

Effect of Particle Size And Concentration Of Fly Ash On Properties Of 

Polyester Thermoplastic Elastomer Composites 

R.S.N. SAHAI, V.R. Gaval, P.A. Mahanwar (Inst. Chem Tech., Mumbai, 

India)


Session 17a OXIDE 4 

Friday 11:00AM-1:30PM Ballroom 1 

Chairs: M. Truccato, Xiaoyan Peng, 

Y. Nakamura, K. Uchiyama 

Fabrication Of Intrinsic Josephson Junctions 

Stacks And Loosely Bound Atoms In 

Superconducting Oxides Marco TRUCCATO, 

Angelo Agostino, Stefano Cagliero (Torino U., 

Italy), Holger Motzkau, Andreas Rydh, Vladimir 

Krasnov (Stockholm U., Sweden) INVITED 

Stimuli-Responsive Periodic Micro Structures 

On Oxide-Polymer Hybrid Films 

Masahide TAKAHASHI, Yasuaki Tokudome 

(Osaka Prefecture U., Japan) INVITED 

Li 1.6[MnM] 1.6O 4 (M=3d Transition Metal) 

Spinel Type Manganese Oxides Prepared By 

Hydrothermal Method Kang-Sup CHUNG 

(Korea Inst. Geosci. & Min Res., Daejon, S. 

Korea), Wonjin Moon, Kyoungshin Lee, 

Byungkyu Park (Korea Basic SCi Inst, 

Suncheon), Sujin Pang (Chonbuk Nat. U.), Soon- 

Ki Jeong (Soonchunhyang U.), Hyejin Seo, 

Daehee Won (Suncheon Nat. U.), Yangsoo Kim 

(Korea Basic Sci Inst., Suncheon) 

Growth of Catalyst-free SiC and SiC/SiO 2 

Nanowires using the Precursor of 

Methyltrichlorosilane Yoo Youl CHOI, Doo Jin 

Choi (Yonsei U., Seoul, S. Korea) 

Structural Degradation And Sensing 

Properties Of ZnO Nano Films 

Xiaoyan PENG, J. Chu, M. Sajjad, P.X. Feng (U. 

Puerto Rico, San Juan) 

Rheological Properties Of Polyethylene- 

Copper Oxide Composites 

`Tiam-Ting TEE, Tin-Sin Lee, Yew-Sing Chin 

(UTAR, Kuala Lumpur, Malaysia) 

Microstructure of Magnetron Sputtered ZnO 

Films on Glass Substrate 

Shiuh-Chuan HER, Tsung-Chi Chi (Yuan Ze 

Univ., Chung Li) 


Friday 11:00AM-1:30PM Dalian Room 

Chairs: I. Kratochvilova, X. Bokhimi, B. Zhang, V. Koerstgens 

Processing Of Nanomaterials In The C-B-N System 

Raj N. SINGH (U. Cincinnati, OH) 

Effect of the Activation Atmosphere on the Gold-Support Interaction in 

Au/Rutile Catalysts Xim BOKHIMI, Rodolfo Zanella, Antonio Morales, 

Viridiana Maturano, Carlos Angeles (UNAM, Mexico DF) 

Facile Preparation And H 2 Separation Of Multi-Walled Carbon 

Nanotube Buckypaper Membranes With Tunable Pore Sizes 

Xiaoshuang YANG, Lixiang Yuan, Andrew I. Minett, Andrew Harris (U. 

Sydney, Australia) 

Semicrystalline Polyimide/Mwcnt Hybrid Nanocomposites:Structure, 

Dynamics, And Properties Baode. ZHANG (Harbin I.T., China), V. A. 

Bershtein (Ioffe, Russia), T.E. Sukhanova (ST. Petersburg, Russia), 

Wanchen. Zang (Jilin U., Changchun, China),P.N. Yakushev (St. 

Petersburg), Yao. Li (Harbin I.T.), Chunhai. Chen (Jilin U.), L.M. Egorova, 

I.V. Gofman , G. N. Gubanova, A. Y. Volkov, M. E. Vylegzhanina (St. 

Petersburg) 

Flow Induced Surface Attachment Of Gold Nanoparticles – An In Situ 

X-Ray Investigation With Micro-Fluidic Cell Volker KOERSTGENS, 

Monika Rawolle (TU Muenchen, Germany), Adeline Buffet, Gunthard 

Bennecke, Gerd Herzog, Jan Perlich, Matthias Schwartzkopf (DESY, 

Hamburg, Germany), Martin Trebbin, Julian Thiele,Sebastian With (U. 

Bayreuth, Germany 

Toughening Epoxy Thermosets And Their Carbon Fibre Reinforced 

Composites With Electrospun Nanofibres Jin Zhang, Tong LIN, 

Xungai Wang (Deakin U., Geelong, Australia) 

Fluorescence of Variously Terminated Nanodiamond Particles 

Irena KRATOCHVILOVA, A. Kovalenko, V. Rezacova, L. Fekete, F. 

Fendrych,S. Zalis (Prague), V. Kocka (Charles U., Prague), M. Ledvina, P. 

Cígler, J. Stursa (Prague), M. Nesládek (Diepenbeek, Belgium) 



Chairs: F.c. Meng, J.A. Perez, Z.A. Talib, 

Keryn Lian 

Effect of Injection Molded 

Nanoparticle/Polymer Composites on Their 

Electrical Properties Haihong WU, Tiecheng 

Li (Henan U.T., Zhengzhou, China), Aiyun Jiang, 

Baofeng Zhang (Huanghe Sci.Tech. U., China) 

Carbon Naotube Composite Films With 

Switchable Transparency Fancheng MENG, 

Xiaohua Zhang, Geng Xu, Zhenzhong Yong, 

Hongyuan Chen,Minghai Chen, Qingwen Li 

(Suzhou Inst Nanotech & Nanobionic, China), 

Yuntian Zhu (N.Carolina St.U., Raleigh) 

Phase Transition And Magnetic Properties Of 

Ferromagnetic Shape Memory Fe 66Pd 30Rh 4 

Alloys Chien-Feng LIN, Jin-Bin Yang (Nat. 

Kaohsiung First U. Sci Tech.) 

Optical Properties Dependence As Function 

Of The Temperature In Aln Films Deposited 

By PLD Jaime A. PEREZ, H. Riascos (U.T. 

Pereira, Colombia), J.C. Caicedo (U. Valle, Cali, 

Colombia), L. Yate (U. Barcelona, Spain) 

Beyond Complementary Metal Oxide 

Semiconductor (CMOS): Materials and 

Engineering Arezki BENFDILA (Univ. M. 

Mammeri, Algeria) 

Structural and Electrical Properties of Tin 

Selenide Film Z.A. Talib, J.Y.C. Liew, W.M.M. 

Yunus, Z. ZAINAL, S.A. Halim (U. Putra 

Malaysia, Selangor) 

Biomaterial Aisi 316l Ss Surface Film Analyses 

After Electropolishing Treatments Under 

Varied Magnetic Fields Tadeusz 

HRYNIEWICZ, K. Rokosz (Koszalin, Poland) 

Polyoxometalates - Carbon Nanotubes 

Composites For Electrochemical Capacitors 

Tahmina Akter, Gurvinder Bajwa, Keryn LIAN 

(U. Toronto, Canada) Thurs-Fri 



Chairs: Con Y. Adam, S.I. Zaki, Q.H. Fang, 

D. Matesan 

The Use Of Nanocomposites To Develop The 

Microstructure And Impermeability Of High 

Performance Concrete Saaid. I. ZAKI , 

Khaled. S. Ragab, Alaa. M. Rashad (HBRC, 

Cairo, Egypt) 

Pultruded Natural Fibre Reinforced 

Composites: Preparation, Properties and 

Applications HAZIZAN Md Akil, Hafiz Zamri, 

Helfy Affzan Shahidan, Zainal Arifin Mohd 

Ishak, Azhar Abu Bakar (U. Sains Malaysia, 

Penang) 

The Distributions Of The Interfacial Shear Stress 

For A Single Cord/Rubber Composite In Pulling 

Out Process Under Thermal Conditions Qinghong 

FANG, Taimin Cheng, Huibin Wang, Baozong Huang 

(Shenyang U. Chem.Tech., China), David Hui (U. 

New Orleans) 

Preparation Of Clinker Cementitious 

Materials By Re-Melting Steel Slag 

Hui LI, Delong Xu, Yong Min, Yuxiang Li, Yang 

Qiu, Hongyuan Peng (Xi’an U.Architecture & 

Tech., China) 

Discussion of Some Issues For Building Integrated 

Photovoltaics (BIPV) in Architectural Design In 

China Changhai PENG, Ying Huang , Zhishen Wu 

(Southeast U., Nanjing,China) 

Strength Capacity Of One-Way Continuous 

Reinforced Concrete Slabs Domagoj Matesan, Jure 

Radnic, Nikola GRGIC, Vatroslav Camber (U. Split, 

Croatia) 

Effect Of Finger Joint Size And Orientation On The 

Tension Strength Of Eucalyptus 

Regnans/Delegatensis Con Y. ADAM, B M Ahmed 

(Monash U., Melbourne, Australia) 

Strengthening of Reinforced Concrete Beams using 

Carbon Fiber Sheets bonded with 

Cement-Based Mortars. Abdullah Hilal Al-SAIDY 

(Sultan Qaboos U., Oman) 


Friday 11:00AM-1:30PM Hangzhou Room 

Chairs: C.N. Suresha, Yulong Wang, J.F. Shu, A.M. Eleiche 

Improved Interfacial Strength of SMA Composite With Nanotreated 

Fibre Surface 

Yulong WANG (Hong Kong Poly U., China), Zhenqing Wang (Harbin I.T., 

China), Limin Zhou (Hong Kong Poly U., China) 

Study of the Efficiency of UV and Visible-Light Photocatalytic 

Oxidation of Methanol on Mesoporous RuO 2-TiO 2 Nanocomposites 

Adel A. ISMAIL (CMRDI, Cairo, Egypt), Detlef W. Bahnemann (U. 

Hannover, Germany) 

Micro-Nano Mineral Study And New Mineral Discovery 

Jinfu SHU (Carnegie Inst. Of Washington, DC), Jingsui Yang, He Rong 

(Inst of Geology, Beijing), Ho-kwang Mao (Carnegie Inst.) 

Design Of A Polyamide Composite For High Speed Sliding Conditions 

A.M. ELEICHE (King Fahd U. Pet Min, Dhahran, S. Arabia), M.O.A. 

Mokhtar (Cairo U., Egypt), E.S. Nasr, G.M.A. Kamel 

Characterization Of The Durability Of Surface Treatments Used In 

Adhesive Bonding 

Susan PITT, Daren Peng, Rhys Jones (Monash U., Australia) 

Development of Composite Structural Parts for a Vertical-axis Wind 

Turbine Tai-Yan KAM, H.M. Su, R.R. Chang, F.M. Lai, J.H. Wu (Nat. 

Chiao Tung U., Hsinchu) 

Controlled Synthesis of Sb Nanostructures and Their Conversion to 

CoSb 3 Nanoparticle Chains for Li-Ion Battery Electrodes Jixin Zhu, 

Qingyu YAN (Nanyang T.U.,Singapore) 

Development Of A Model For Online Monitoring Of Friction Stir 

Welding Using Acoustic Emission Technique C.N. SURESHA, B.M. 

Rajaprakash B M, Upadhya Sarala (U. Bangalore, India)

1:30PM-2:30PM Lunch 

Session 18a TEXTILE 4 

Friday 2:30PM-5:00PM Ballroom 1 

Chairs: Wen-Ju Chuang, Shuai Jin, H.N. Tran, 

An Du 

Study On Test Method For Shear Properties 

Of Minisize Rod―Z-Pin Ning Li, J. XIAO 


Effects Of Ultraviolet Aging On The 

Mechanical Properties Of Hemp Fibers 

Shuai JIN, Xiaolu Gong (U.T. Troyes) 

Mechanical Properties Of Unidirectional Jute 

Fiber Reinforced Poly(Butylene Succinate) 

Biodegradable Composites Huu Nam TRAN, 

Shinji Ogihara (Tokyo U. Sci., Japan) 

Water Permeation In Polylactide And 

Polylactide/Montmorillonite Composites 

An DU, Donghun Koo, Mary Ziegler, Richard A. 

Cairncross (Drexel U., PA), Genaro Gelves, 

University of Calgary, Calgary 

Advanced Application Of Natural Fibres In High 

Performance Automotive Composite Structures 

V.R Soroush, Hessam GHASEMNEJAD, D.R. 

Marchant, A. Aboutorabi (Kingston U., London, UK) 

Chemically Modified Glass and Cotton Fibres 

Reinforced Polyester Resins 

A.A. KOGO, O.K. Sunmonu, E.G. Kolawole (Ahmadu 

Bello U., Zaria, Nigeria) 

Effect Of Coupling Agent On The Interfacial 

Properties of 3D Ramie/Polypropylene Composites 

Yang SHEN,Jianmeng Zhao, Nanting Zhou, Qian 

Zhang, Xiaomeng Fang, Yiping Qiu (Donghua U., 



Friday 2:30PM-5:00PM Dalian Room 

Chairs: SeungWook Shin, Y. Wang, Liqiang Mai, Xiuchun Yang 

Modifying Polylactide and Polycarbonate Green Blends for Durable 

Applications 

Yeh WANG, T.-F. Hung, S.M. Chiao (Tunghai U., Taichung) INVITED 25 

min Friday 

Mechanical Properties Of Spark Plasma Sintered Al 2O 3-ZrO 2-TiO 2 

Composites Ipek Akin, Filiz Sahin, Onuralp Yucel, Gultekin GOLLER 

(Istanbul T.U., Turkey) 

Layered Oxide Nanowires For High-Energy Lithium ION Batteries 

Liqiang MAI, Lin Xu, Xu Xu, Chunhua Han, Yanzhu Luo (Wuhan U.T., 


Surface Plasmon Resonance Of Ag Nanocrystallines In Opaa Template 

Shanshan Han, Xiuchun YANG, Yan Liu, Junwei Hou, Xiaoning Li, Wei Lu 

(Tongji U., Shanghai, China) 

Atomic Mobility, Freezing, And Superconductivity In Arrays Of 

Metallic Particles Within Nanoporous Matrices 

Elena V. CHARNAYA (Nat. Cheng Kung U. and St.Petersburg St.U.), 

Cheng Tien, M. K. Lee (Nat. Cheng Kung U.), D.Y. Xing (Nanjing U., 

China), B.F. Borisov, Yu. A. Kumzerov (Ioffe Physico, St. Petersburg, 

Russia) 

Synthesis of Cu 2ZnSnS 4 Quaternary Nanocrystal Formed by Annealing 

Precursors Prepared by Microwave-Assisted Solution Method 

SeungWook Shin, JunHee Han(KAIST, Daejeon, S. Korea), ChanYoung 

Park, Jong-Ha Moon (Chonnam N.U., Gwangju, S. Korea), JeongYong 

Lee (KAIST), JinHyeok Kim (Chonnam N.U.) Thurs-Fri 

Sol Gel Derived Bioactive Glass Nanoparticles in the SiO 2-CaO-MgO- 

P 2O 5 System M.R. SAERI, A. Doostmohammadi (Shahrekord U., Iran) 

Thurs-Fri 

Effects Of Diameter And Stone-Wales Defect On The Functionalization 

Of Single-Wall-Carbon Nanotubes By Amine Group Jun CHEN, 

Bessem Ben Doudou, Alexandre Vivet, Gerard Nouet, M’hamed Ayachi (U. 

Caen, France) 

Session 18b INFRA 10 


Chairs: Jinmiao Tan, Min Li, Y.Yu, 

Sing-Ping Chiew 

Preparation And Thermal Properties Of Expanded 

Graphite/ Organic Montmorillonite /Paraffin 

Composite Phase Change Materials Jinmiao TAN, 

Min Li, Zhishen Wu (Southeast U., Nanjing, China) 

Preparation And Performance Montmorillonite 

/Polyacrylamide Composite Materials Min LI, 

Meirong Chen, Zhishen Wu (Southeast U., Nanjing, 


Effect of Basalt Fiber-Wood-Plastic composite by 

Added MAPE Yong WANG, Jinxiang Chen, 

Chenglong Gu, Juan XIE, Sujun Guan (Southeast U., 

Nanjing, China) 

Experiments On CFRP Strengthened Steel Beams 

With Different Laminate Ends 

Yi YU, Sing-Ping Chiew (Nanyang T.U., Singapore) 

Thurs-Fri 

RC Columns With High Cross-Sectional Aspect 

Ratio Wrapped With Glass Fiber Reinforced 

Polymer Sheets Sing-Ping CHIEW, Yi Yu (Nanyang 

T.U., Singapore) Thurs-Fri 

Fiber Composite Application To Protect Bridge Pier 

Caps From Corrosion Related Deterioration In New 

England K. Wayne LEE, Rachel Nichols (U. Rhode 

Island, Kingdton, RI), Craig M. Boyer (Electric Boat), 

P. Balaguru (Rutgers, NJ), C. Franco(Rhode Island 

Dept of Trans.) Friday PM 

The Experimental Study For FRP Flange Structural 

Characteristics M. WANG, Z.M. Huang (Tongji U., 


Performance Of Concrete Columns Reinforced By 

Steel-Frp Composite Bar Under Static Loading And 

Dynamic Excitation Ze-Yang SUN (Concrete & 

Prestressed Lab, Nanjing), Gang Wu, Sheng-Ze Yang, 

Zhi-Shen Wu (Southeast U., Nanjing, China) 


Friday 2:30PM-5:00PM Hangzhou Room 

Chairs: Ping Yang, H. Anuar, Rusli, Marek Burda 



Chairs: J. Kong, L. Feo, A. Dacko, J. Wolodko 

Nanocomposite Films Exhibiting Self- 

Assembled Alternating Layers 

Wan-Yu WU (Mingdao U., Changhua) 

Stable Photocatalytic Properties Of Lithium 

Niobate Spheres For The Degradation Of 

Organic Pollutants Jingling LIU, Dae Joon 

Kang (Sungkyunkwan U., Suwon, S. Korea) 

Failure Estimate Of Layered Fiber-Metal 

Laminates Using Experiment And Finite 

Element Techniques Adam DACKO (Warsaw 

U.T., Poland) 

Effect Of Orientation Of Axis Of Symmetry 

For Orthotropic Media Containing An 

Elliptical Inhomogeneity On Elastic Field 

G.N. WANG, G.H. Nie (Tongji U., Shanghai, 

China), C.K. Chan (Hong Kong Poly U., China) 

Research Progress of Secondary Bending in 

Composite Joints Yuan Fa, Guoqing Yuan 

(Tongji U., Shanghai, China) 

Structural Design Optimization Of A Desktop 

Machine Tool For Machining Ti Alloy By 

Using Taguchi Method Based Sequential 

Algorithm Sung-Hyun Jang , Sang-Hwa Lee 

(Changwon N.U., S. Korea), Jay Kim (VATECH, 

Gyeongsangnam, S. Korea), Young-Hyu Choi 

(Changwon N.U.) 

Fe 3O 4 / Thermo-Responsive Polymer 

Composite Nanofibers Shih-Ru HUANG, Wen-Yen 

Chiu, King-Fu Lin (Nat. Taiwan U., Taipei) 

Feedstock and Processing Effects on the 

Performance of Natural Fiber Thermoset 

Composites John WOLODKO, Kirill Alemaskin, 

Aaron Fuhr, Lisa Sopkow (Alberta Innovates, 

Edmonton, Canada) Tuesday-Fri 

Optimal Design of Molded Bark Particleboard Used in Heated 

Flooring System by using Finite Element Analysis Ping YANG 

(Kumamoto U., Japan), Hidefumi Yamauchi (Akita Pref. U., Japan), Hikaru 

Sasaki (Helix Ltd, Akita, Japan) 

Laser Repair Hardfacing Of Titanium Alloy Turbine Blades 

Andrzej A. KlimpeL, Marek BURDA (Silesian U.T., Gliwice, Poland) 

Energy Harvester Device For Charging Applications 

A.R. AKANDE, A. Nechibvute, P.V.C Luhanga (U. Botswana) 

Mechanical Properties Of Injection Moulded Polylactic Acid – Kenaf 

Fibre Biocomposites 

Hazleen ANUAR, A. Zuraida (IIUM, Kuala Lumpur, Malaysia) 

High Efficiency Si-nanowires/Poly (3,4-Ethylene-Dioxythiophene): 

Poly(Styrenesulfonate) Hybrid Solar Cells 

Lining He, RUSLI (Nanyang T.U., Sinagpore), Changyun Jiang (A*STAR, 

Singapore), Hao Wang (Nanyang T.U.) Thurs-Fri 

Luminescence Light Waveguide And Lasing Properties In Some Doped 

II-Visemiconductor Nanowire Bingsuo ZOU, Guozhang Dai, Ruibin 

Liu (Beijing Inst.Tech., China) Thurs-Friday 

Smart Materials Tectonics: Development Of Solid Electrolyte 

Dendrites With Micro Lattice Structures To Realize Fuel Cell 

Miniaturizations Soshu KIRIHARA, Katsuya Noritake, Satoko Tasaki 

and Hiroya Abe (Osaka U., Japan) Wed-Fri 

Design Of Clamping Apparatuses And Testing Procedures Of A 

Vertical-Axis Composite Wind Power System Feng-Min LAI, Chao- 

Chieh Yang, Chen-Mao Yang, Chun-Hsiang Lan (Da-yeh U., Changhua) 

Friday 

July 29, 2011 Friday night BANQUET 7:00PM-11:00PM

PVG airport to our hotel, you can take subway (inside the Puding airport) No.2 line for 14 stops and get off at Century Avenue 

Stop. Then transfer subway No.4 line for 2 stops and get off at Yang Shu Pu Road Stop. Lastly, you can take a taxi to 

Wyndham Bund East Shanghai(No.25 Ning Guo Road) and the fare is around RMB15. 

The cost is RMB160 by taxi from PVG airport to hotel. 

Our hotel name is Wyndham Bund East hotel, 上海兴荣温德姆酒店, the address is 宁国路 25 号。

ICCE-19 July 24-30, 2011 Shanghai, China - icce-nano.org

Create successful ePaper yourself

Delete template?

Save as template?