ec declaration of conformity - Zhejiang Joinan Lighting Co.,ltd

Recommendations

Info

VOV CERTIFICATION & TESTING LABORATORY V0398 RCo Network Phone Load 300 Ohm Erika Fiedler V0399 RCo Network Phone Load 300 Ohm Erika Fiedler V0400 RCo Network Audio Adapter Erika Fiedler V0401 RCo Network Audio Adapter Erika Fiedler V0402 Coupling Unit SR (47K Ohm) Erika Fiedler 0403 Coupling Unit SR (47K Ohm) Erika Fiedler V0404 Coupling Unit SR (47K Ohm) Erika Fiedler V0405 Coupling Unit SR (2.2K Ohm) Erika Fiedler V0406 Coupling Unit SR (22K Ohm) Erika Fiedler V0407 Coupling Network “M” Erika Fiedler V0408 Coupling Network “A” Erika Fiedler V0409 Coupling Network “A” Erika Fiedler V0410 Coupling Network “A” Erika Fiedler V0411 Coupling Network “L” Erika Fiedler V0412 Coupling Network “L” Erika Fiedler V0413 Coupling Network “L” Erika Fiedler V0414 A/V adapter Type 2 Erika Fiedler EN 55015:2000+A1:2001+A2:2002 EN 61547:1995+A1:2000 Project No.: 8607575 Registration No.: VT09017073 Page 16 of 48 FORM COPYRIGHT©VOV CERTIFICATION & TESTING LABORATORY LIMITED
VOV CERTIFICATION & TESTING LABORATORY Radiated electromagnetic Emission Test Procedures ● Test configuration The test configuration corresponds to the standard ICE/CISPR 15. The lighting equipment under test is placed in the center of the antenna.(see picture 1) In the case of lighting equipment incorporating more than one lamp, all the lamps are operated simultaneously. The earth terminal of the lighting equipment shall be connected to the reference earth of the V-network. The observation of the equipment under test is realized by 3 video cameras and by a microphone. ● Test parameters and marginal conditions The test are carried out with a frequency range 9 kHz to 30 MHz. Further information please find in test report. General Immunity requirements for equipment defined in the scope concern: — electrostatic discharges; — continuous and transient disturbances; — radiated and conducted disturbances; — radio frequency and mains supply related disturbances. They are given in subclauses 5.2 to 5.9 on a port by port basis. Tests are applied to the relevant ports of the equipment as indicated in the respective subclauses. Tests shall be conducted in a well-defined and reproducible manner. Tests shall be carried out as single tests in sequence. The sequence of testing is optional. It may be determined from consideration of the electrical characteristics and usage of a particular equipment that some of the tests are inappropriate and therefore unnecessary. In such cases it is required that the decision not to test be recorded in the test report. The description of the test, the test generator, the test methods and the test set-up are given in the basic standards which are referred to in the relevant subclauses. Test levels are generally based on level 2 values as recommended in the basic standards. EN 55015:2000+A1:2001+A2:2002 EN 61547:1995+A1:2000 Project No.: 8607575 Registration No.: VT09017073 Page 17 of 48 FORM COPYRIGHT©VOV CERTIFICATION & TESTING LABORATORY LIMITED
Page 1 and 2: VOV CERTIFICATION & TESTING LABORAT
Page 15: VOV CERTIFICATION & TESTING LABORAT

ec declaration of conformity - Zhejiang Joinan Lighting Co.,ltd

Create successful ePaper yourself

Delete template?

Save as template?