DINITROL 750/755 - DINOL
DINITROL 750/755 - DINOL
DINITROL 750/755 - DINOL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>DINITROL</strong><br />
<strong>750</strong>/<strong>755</strong><br />
STP Sealant
<strong>DINITROL</strong> <strong>755</strong><br />
<strong>DINITROL</strong> <strong>755</strong> is a moisture curing, one-<br />
component, spreadable joint sealer.<br />
<strong>DINITROL</strong> <strong>755</strong> is solvent free with very low<br />
shrinkage of < 1 %.<br />
<strong>DINITROL</strong> <strong>755</strong> also has excellent stonechip<br />
protection properties.<br />
<strong>DINITROL</strong> <strong>750</strong><br />
<strong>DINITROL</strong> <strong>750</strong> is a sprayable and spreadable,<br />
moisture curing, one-component<br />
joint sealer.<br />
Spray application can reproduce an original<br />
OEM finish.<br />
<strong>DINITROL</strong> <strong>750</strong> has excellent stonechip<br />
protection properties.
Advantages of <strong>DINITROL</strong> <strong>750</strong> and <strong>DINITROL</strong> <strong>755</strong><br />
Properties Advantages<br />
<strong>DINITROL</strong> <strong>750</strong> is sprayable. The original OEM finish can be reproduced.<br />
<strong>DINITROL</strong> <strong>755</strong> is spreadable. Brushed textures can be reproduced.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong> can be overpainted<br />
wet on wet.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong> have a<br />
Shore-A-Hardness > 45.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong>: No special labelling<br />
required according to EC-directives.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong> have good adhesion<br />
properties.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong> have high<br />
UV-resistance.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong> have fast skin<br />
formation times.<br />
<strong>DINITROL</strong> <strong>750</strong>/<strong>755</strong> have good stonechip<br />
protection properties.<br />
Wet on wet overpaintability for up to five days<br />
after application.<br />
Reduced paint cracking under stress.<br />
Environmental benefits for the workplace.<br />
No requirement for mechanical pre-treatment<br />
or priming.<br />
Good colour retention with or without overpaint.<br />
Short tack-free-time improved process.<br />
Enhanced stonechip protection.
Stonechip protection<br />
customary MS-Polymer <strong>DINITROL</strong> <strong>750</strong> STP-Sealant<br />
The images show a customary MS-Polymer and the STP-Sealant <strong>DINITROL</strong> <strong>750</strong> after<br />
the PSA-Stonechip-protection tests.<br />
<strong>DINITROL</strong> <strong>750</strong> offers triple the stonechip protection.<br />
The combination of strength and hardness guaranties excellent stonechip protection.<br />
At a film thickness < 300µ a formed film exists, offering good protection against<br />
water and road salt.
Technical Properties<br />
<strong>DINITROL</strong> <strong>750</strong> <strong>DINITROL</strong> <strong>755</strong><br />
Basis 1-component STP 1-component STP<br />
Colours grey, black, beige, white white<br />
Consistency paste paste<br />
Density (20°C) appr. 1,4 g/ml appr. 1,6 g/ml<br />
Processing temperature +5 to +30°C +5 to +30°C<br />
Temperature resistance -40 to +80°C<br />
short time to +120°C<br />
Resistance long term water, road salt, hydraulic brake fluid,<br />
water based cleaning agents<br />
-40 bis +80°C<br />
short time to +120°C<br />
water, road salt, hydraulic brake fluid,<br />
water based cleaning agents<br />
Resistance short term petrol, grease, mineral oil petrol, grease, mineral oil<br />
Skin formation appr. 20 Min (23°C/50 r.h.) appr. 20 Min (23°C/50 r.h.)<br />
Curing time appr. 3 mm after 24 h (23°C/50 r.h.) appr. 3 mm after 24 h (23°C/50 r.h.)<br />
Tensile strength appr. 1,6 N/mm 2 appr. 1,6 N/mm 2<br />
Elongation appr. 210 % appr. 200 %<br />
Hardness Shore A appr. 46 appr. 55<br />
All data and recommentions are the result of careful tests by our laboratories. They only can be considered as<br />
recommendation which correspond to the level of experience of today. The data are given in good faith. However,<br />
in view of the multiplicity of possible application and working methods, we are not in a position to assume any<br />
responsibility or obligations deriving from the use of our products.
The product range of EFTEC Aftermarket<br />
The complete product range for car repair and industrial applications contains:<br />
Body Repair: Sealers<br />
Adhesives<br />
Primers<br />
Putties<br />
Fillers<br />
Laquers<br />
Sound Deadening<br />
Corrosion protection: Vehicle Cavity<br />
Vehicle Underbody<br />
Stonechip Protection<br />
Direct Glazing Adhesives: PU based,<br />
1- and 2-component,<br />
cold and warm applicable<br />
EFTEC Aftermarket GmbH<br />
Pyrmonter Straße 76<br />
D-32676 Lügde<br />
Telephone:<br />
Telefax:<br />
E-Mail:<br />
+49(0)5281- 9 82 98-0<br />
+49(0)5281- 9 82 98-60<br />
service@eftec.de