Declaration of Conformity - KSB

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Bahnhofplatz 1
91257 Pegnitz
Registered office: Frankenthal (Pfalz)
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Gate valves
-- STAAL 40 PN 10-40 DN 50-200
-- STAAL 100 PN 63-100 DN 50/50-300/250
-- AKG-A/AKGS-A PN 63-160 DN 80/80-300/250
-- ZTS Pmax. = 600 bar DN 50/50-500/450
Swing check valves
-- STAAL 100 PN 63-100 DN 80/80-300/250
-- AKR/AKRS PN 63-160 DN 80/80-300/250
-- ZRS Pmax. = 600 bar DN 50/50-500/450
Line blind valve
-- VTS Pmax. = 600 bar DN 200-500
Applicable technical code: AD 2000 code / TRD 110, TRB 801 No. 45
Suitable for: Fluids in Groups 1 and 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
Rainer Michalik
Integrated Management
Date: 01.02.2007
(This document has been prepared electronically and is valid without signature.)
TÜV SÜD Industrie Service GmbH
Steam and Pressure Engineering Department
Edisonstr. 15
90431 Nürnberg
Germany

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Bahnhofplatz 1
91257 Pegnitz
Registered office: Frankenthal (Pfalz)
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Shut -off valves
-- BOA-H/HE/HV/HEV PN 25/40 DN 10-350
-- NORI 40 PN 25/40 DN 10-400
-- NORI 160 PN 63-160 DN 10-200
-- NORI 320 (ZXLF/ZXSF) PN 250/320 DN 65-200
-- NORI 320 (ZXSV) PN 250/320 DN 10-50
-- NORI 500 PN 250-500 DN 10-65
-- NORI-A PN 250-500 DN 10-50
-- NORICHEM PN 10-40 DN 10-200
-- BOACHEM PN 10-40 DN 15-100
Start and stop control valves
-- ZJSVA/ZXSVA
Non -return valves
Pmax. = 600 bar DN 65/60-250/125
-- NORI 40 PN 25/40 DN 10-300
-- NORI 160 PN 63-160 DN 10-200
-- NORI 320 (RXL/RXS) PN 250-320 DN 65-200
-- RGS PN 250-500 DN 10-50
-- NORI-A PN 250-500 DN 10-50
-- NORICHEM
Strainer
PN 10-40 DN 10-200
-- NORICHEM PN 10-40 DN 10-200
Applicable technical code: AD 2000 code / TRD 110, TRB 801 No. 45
Suitable for: Fluids in Groups 1 and 2
Conformity assessment procedure: Module H
Name and address of the notified body TÜV SÜD Industrie Service GmbH
responsible for approval and surveillance: Steam and Pressure Engineering Department
Edisonstr. 15
90431 Nürnberg
Germany
Identification number of the notified body: 0036
Valves DN ≤ 25 fall under Article 3, Section 3, of the Pressure Equipment Directive 97/23/EC. They must bear
neither the CE marking nor the identification number of a notified body.
Rainer Michalik
Integrated Management
Date: 01.09.2009
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Bahnhofplatz 1
91257 Pegnitz
Registered office: Frankenthal (Pfalz)
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Maintenance-free bellows-type shut-off valves
-- NORI 40 ZYLB/ZYSB PN 25/40 DN 15-300
Strainer
-- NORI 40 FSL/FSS PN 25/40 DN 15-300
Applicable standards: Design: DIN 3840
incl. AD 2000-A4 para. 6.2
Material: DIN EN 10213-1
DIN EN 10213-2
Pressure and leak test: DIN EN 12266-1
Final test: ZN 59091, ZN 59092
ZN 59095, ZN 59096
Suitable for: Fluids in Groups 1 and 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
Marking: as per PED 97/23/EC, EN 19
TÜV SÜD Industrie Service GmbH
Steam and Pressure Engineering Department
Edisonstr. 15
90431 Nürnberg
Germany
Valves DN ≤ 25 fall under Article 3, Section 3, of the Pressure Equipment Directive 97/23/EC. They must bear
neither the CE marking nor the identification number of a notified body.
Rainer Michalik
Integrated Management
Date: 01.02.2007
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the
Pressure Equipment Directive 97/23/EC.
Description of valve types: Knife gate valves
-- HERA BD max. PN 10 DN 50-1200
In accordance with the harmonized
European standards:
EN 12266-1
EN 1092-2
EN 558-1
Suitable for: Fluids in Groups 1 (b) and 2
Conformity assessment procedure: Module A
Rainer Michalik
Integrated Management
Date: 1 September 2007
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Shut-off valves
-- BOA-H JL1040 PN 16 DN 15-300
-- BOA-H JS1025 PN 16 DN 15-350 1)
-- BOA-H JS1025 PN 25 DN 15-150 2)
In accordance with harmonized European
standards
1 ) DN15--200 to AD 2000 code
2 ) DN 15--150 to AD 2000 code
Non-return valves
-- BOA-R JL1040 PN 6 DN 15-200
-- BOA-R JL1040 PN 16 DN 15-300
-- BOA-R JS1025 PN 16 DN 15-350
Shut-off valves / EN 19
Non-return valves EN 12516-3
EN 12266-1
EN 13789
EN 1092-2
Non-return valves EN 12334
And other standards / codes: DIN 3840 Paras. 1.3 and 4.3
1) and 2) to AD 2000 code
Suitable for: Fluids in Groups 1 and 2
Conformity assessment procedure: Module H
Name and address of the notified body responsible
for approval and surveillance:
Identification number of the notified body: 0036
TÜV Süddeutschland
Bau und Betrieb GmbH
Westendstr. 199
80686 München
Germany
Valves of DN ≤ 25 (PN 16/25) fall under Article 3, Section 3, of the Pressure Equipment Directive 97/23/EC.
They must bear neither the CE marking nor the identification number of a notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Shut-off valves
-- BOA-SuperCompact PN 6/10/16 DN 20-200
-- BOA-Compact PN 6, 16 DN 15-200
-- BOA-Compact EKB PN 10/16 DN 15-200
-- BOA-W PN 6, 16 DN 15-200
In accordance with harmonized European
standards
Shut-off valves EN 19
EN 12516-3
EN 12266-1
EN 13789
EN 1092-2
And other standards / codes: DIN 3840 Paras. 1.3 and 4.3
Suitable for: Fluids in Group 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
TÜV Süddeutschland
Bau und Betrieb GmbH
Westendstr. 199
80686 München
Germany
Valves DN ≤ 50 (PN 16), DN ≤ 100 (PN 10) and DN ≤ 150 (PN 6) fall under Article 3, Section 3, of the Pressure
Equipment Directive 97/23/EC. They must bear neither the CE marking nor the identification number of a
notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Non-return valve
-- BOA-RVK PN 6/10/16 DN 15-200
In accordance with harmonized European
standards
EN 12266-1
And other standards / codes: DIN 3840
Suitable for: Fluids in Group 2
Conformity assessment procedure: Module A
Name and address of the notified body: LRQA GmbH Hamburg
Mönckebergstraße 27
20095 Hamburg
Germany
Valves DN ≤ 50 (PN 16), DN ≤ 100 (PN 10) and DN ≤ 150 (PN 6) fall under Article 3, Section 3, of the Pressure
Equipment Directive 97/23/EC. They must bear neither the CE marking nor the identification number of a
notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Balancing valves
-- BOA-Control IMS PN 16 DN 15-350
In accordance with harmonized European
standards
Shut-off valves EN 19
EN 12516-3
EN 12266-1
EN 13789
EN 1092-2
And other standards / codes: DIN 3840 Paras. 1.3 and 4.3
Suitable for: Fluids in Group 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
TÜV Süddeutschland
Bau und Betrieb GmbH
Westendstr. 199
80686 München
Germany
Valves DN ≤ 50 (PN 16) fall under Article 3, Section 3, of the Pressure Equipment Directive 97/23/EC. They
must bear neither the CE marking nor the identification number of a notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Control valves
-- BOA-CVE SuperCompact PN 6/10/16 DN 20-200
-- BOA-CVE Compact PN 6, 16 DN 15-200
-- BOA-CVE Compact EKB PN 10/16 DN 15-200
-- BOA-CVE Control IMS PN 16 DN 15-200
In accordance with harmonized European
standards
Shut-off valves EN 19
EN 12516-3
EN 12266-1
EN 13789
EN 1092-2
And other standards / codes: DIN 3840 Paras. 1.3 and 4.3
Suitable for: Fluids in Group 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
Applicable directives:
TÜV Süddeutschland
Bau und Betrieb GmbH
Westendstr. 199
80686 München
Germany
Electromagnetic compatibility: Directive 89/336/EEC
Electr. equipment for use within specific voltage
limits:
Directive 73/23/EEC
Valves DN ≤ 50 (PN 16), DN ≤ 100 (PN 10) and DN ≤ 150 (PN 6) fall under Article 3, Section 3, of the Pressure
Equipment Directive 97/23/EC. They must bear neither the CE marking nor the identification number of a
notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Strainers
-- BOA-S (JL 1040) PN 6 DN 15-200
-- BOA-S (JL 1040) PN 16 DN 15-300
In accordance with harmonized European
standards
EN 1561
EN 12266-1
EN 558-1
EN 1092-2
And other standards / codes: DIN 3840
Suitable for: Fluids in Groups 1 and 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0062
Büro Veritas S. A.
34, rue Rennequin
75850 Paris Cedex 17
France
Valves DN ≤ 25 (PN 16/25) fall under Article 3, Section 3, of the Pressure Equipment Directive 97/23/EC. They
must bear neither the CE marking nor the identification number of a notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Johann-Klein-Str. 9
67227 Frankenthal
Germany
declare that the valves listed below satisfy the safety requirements laid down in the Pressure Equipment
Directive 97/23/EC (PED).
Description of valve types: Strainers
-- BOA-S (JS 1025) PN 16 DN 15-300
-- BOA-S (JS 1025) PN 25 DN 15-200
In accordance with harmonized European
standards
And other standards / codes: DIN 3840
Strainers EN 558-1
EN 12266-1/-2
EN 1563
EN 1092-2
Suitable for: Fluids in Groups 1 and 2
Conformity assessment procedure: Module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
TÜV Süddeutschland
Bau und Betrieb GmbH
Westendstr. 199
80686 München
Germany
Valves DN ≤ 25 (PN 16/25) fall under Article 3, Section 3, of the Pressure Equipment Directive 97/23/EC. They
must bear neither the CE marking nor the identification number of a notified body.
Rainer Michalik
Quality Management
(This document has been prepared electronically and is valid without signature.)

EC Declaration of Conformity
Hereby we, KSB Pumps Limited
151 Mettupalayam Road
N.S.N. Palayam
Coimbatore - 641 031
Registered Office: Mumbai
India
declare that the valves listed below satisfy the safety requirements laid down in the
Pressure Equipment Directive 97/23/EC (PED).
Description of valve types: Gate, Globe and Check Valves
-- SICCA type GTF, GLF, PCF class 800-2500 1 /2” -2”
-- SICCA type GTC, GLC, SCC class 150-2500 2” - 12”
Reference standards and codes: ASME B16.34, API 598, ASTM / ASME, API 600, API 602,
BS 5352, BS 1873, BS 1868
Suitable for: Fluids in groups 1 and 2
Conformity Assessment Procedure: Module H
Name and address of the responsible notified
body for approval and surveillance:
Identification number of the notified body: 0044
RWTÜV Anlagentechnik GmbH
P.O. Box 103261
Kurfürstenstr. 58
45032 Essen
Germany
Certificate number: 04202244010019
Valves with a nominal pipe size below and including 1 inch fall under Article 3, Section 3, of the Pressure
Equipment Directive 97/23/EC. They must bear neither the CE-marking nor the identification number of a
notified body.
V. VISWANATHAN V. VENUGOPALAN
Head -- Quality Assurance Head -- Engineering
(This document was prepared electronically and is valid without signature)

EC Declaration of Conformity
Herewith we, KSB Aktiengesellschaft
Bahnhofplatz 1
91257 Pegnitz
Registered office: Frankenthal (Pfalz)
Germany
declare that the valves / assemblies listed below satisfy the safety requirements laid down in the Pressure
Equipment Directive 97/23/EC (PED).
Description of valve types: changeover valves
-- ZJSVM
non-return valves
-- RJSVM
in compliance with: AD 2000 code, TRD 110, TRB 801 No. 45
suitable for: fluids in Groups 1 and 2
Conformity assessment procedure: module H
Name and address of the notified body
responsible for approval and surveillance:
Identification number of the notified body: 0036
TÜV SÜD Industrie Service GmbH
Abteilung Dampf- und Drucktechnik
Edisonstr. 15
90431 Nürnberg
Germany
For models with by-pass, the assembly’s conformity with the Pressure Equipment Directive 97/23/EC is
confirmed.
Rainer Michalik
Integrated Management
Date: 1 February 2007
(This document has been prepared electronically and is valid without signature.)