Nokia Siemens Networks, Systems & Components JFW Industries, Inc.

SPECIFICATION SHEET
JFW MODEL 50PA-532
PROGRAMMABLE ATTENUATOR ASSEMBLY
Page 1 of 1
Frequency Range 800-2200 MHz
JFW Industries, Inc.
Phone: 317-887-1340
sales@jfwindustries.com
www.jfwindustries.com
Configuration 24 x 1 programmable attenuator assembly
(See block diagram 092-6082)
Impedance 50 Ohms nominal
Attenuation Range 0-127 dB in 1 dB steps
VSWR 1.6:1 maximum
Attenuation Accuracy ± 0.5 dB or 2% of programmed
(whichever is greater)
Insertion Loss 23.5 dB maximum
Power Divider Isolation 27 dB minimum
RF Input Power +20 dBm average
+24 dBm (1 dB compression)
Remote Control RS-232 (9600, 19200, or 38400 Baud)
Ethernet (TCP, 10/100, up to 3 users)
Remote Commands Variable Handover (VHND Av Aw Vx Vy Tz)
Fade Attenuator (FAx y z t)
Set Attenuator (SAx y)
Set All Attenuators (SAAx)
Read Attenuator (RAx)
Pause (PAUSEx)
Disconnect (DIS)
Change Baud Rate (CBx)
Identification (IDN)
AC Supply 100-240 VAC @ 47-63 Hz
RF Connector SMA female
Operating Temperature Range 0ºC to +50ºC
Physical Size See outline drawing 092-6078
ECR/ECN # DATE REV APPR / DATE ECR/ECN # DATE REV APPR / DATE
02/03/2009 TRS 02/03/2009
17849 11/03/2009 A TRS 11/03/2009
JFW FORM E-7-F REV F