FARM AND RANCH EQUIPMENT - Tarter Farm & Ranch Equipment
FARM AND RANCH EQUIPMENT - Tarter Farm & Ranch Equipment
FARM AND RANCH EQUIPMENT - Tarter Farm & Ranch Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
F A R M A N D R A N C H E Q U I P M E N T<br />
0 8 / 0 9 P R O D U C T G U I D E<br />
T A R T E R G A T E . C O M
T A B L E O F<br />
C O N T E N T S<br />
A T V<br />
E Q U I P M E N T<br />
Disc/Culti-Packer Combo ............. 7<br />
8-Blade Disc Harrow .................. 7<br />
Culti-Packer Kit ......................... 7<br />
Chain Harrows ......................... 8<br />
E Q U I N E<br />
E Q U I P M E N T<br />
Stalls .................................... 13<br />
Stall Doors ............................ 14<br />
Saddle Racks ......................... 15<br />
Corral Panels ..................... 16-17<br />
G O A T A N D S M A L L<br />
A N I M A L E Q U I P M E N T<br />
Trough Feeder ............................ 26<br />
Waterer ..................................... 26<br />
Grooming Stand ......................... 27<br />
Goat Gofer ................................ 27<br />
Goat Worker .............................. 28<br />
FA R M A N D R A N C H<br />
E Q U I P M E N T<br />
Gates .................................. 33-36<br />
Continuous Fencing.................. 37<br />
Corral Panels....................... 38-40<br />
Corral Panel Carrier .................. 40<br />
Walk-Thrus.......................... 41-42<br />
Feeder Panels ........................... 43<br />
Hay Feeders ........................ 44-45<br />
Valu-Line Products .............. 46-47<br />
Gate Accessories ...................... 48<br />
Mineral Feeders ....................... 49<br />
Bunk Feeders ...................... 50-51<br />
Squeeze Chutes .....................53-57<br />
Headgates .................................58<br />
Alley and Sweep Systems .......59-62<br />
5-Bushel Spreader ..................... 8<br />
Mobile <strong>Equipment</strong> Package ......... 9<br />
Wire Unrollers .................... 10-11<br />
Hitches ............................. 10-11<br />
Walk-Thrus ........................ 18-19<br />
Feeders ............................. 20-23<br />
Waterer and Earth Tube ............ 23<br />
Equine Accessories .................. 24<br />
Kidder Panels ............................. 29<br />
Pipe Panels ................................ 29<br />
Hay Racks and Feeders ............... 30<br />
Canine <strong>Equipment</strong> ...................... 31<br />
Stock Tanks ................................63<br />
Tanks and Waterers ...............64-65<br />
Earth Tube .................................65<br />
Tank Accessories ........................66<br />
Rotary Cutters ............................69<br />
Hay Spears .......................... 70-71<br />
3-Point <strong>Equipment</strong> .................72-73<br />
Tillage <strong>Equipment</strong> .................74-76<br />
Sub-Compact<br />
3-Point <strong>Equipment</strong> ..................77-79<br />
Wire and Fencing ..................81-84<br />
Wire Panels ................................85<br />
Hardware ............................... 86-90<br />
2 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
“We built <strong>Tarter</strong> to make<br />
our tradition of outstanding<br />
service available nationwide.<br />
We are proud to have <strong>Tarter</strong><br />
products on our customers’<br />
lots quickly, with no back-<br />
orders, no matter where the<br />
store is. We put outstanding<br />
products together with the<br />
industry’s best finishes, fast<br />
service and value pricing for<br />
a winning strategy.”<br />
-Josh <strong>Tarter</strong><br />
VICE PRESIDENT, MANUFACTURING
OUR LATEST CHANGE . . .<br />
. . . IS NOW . . .<br />
For 63 years, the <strong>Tarter</strong> family has manufactured quality products that are<br />
built, used and trusted by pros. As a reflection of our growth and expansion,<br />
<strong>Tarter</strong> Gate has changed its name to <strong>Tarter</strong>. Rest assured that the name is<br />
the only modification we are making to our more than 600 farm and ranch<br />
equipment products – you will still receive the same quality product from the<br />
world’s largest manufacturer of farm and small animal equipment.<br />
Removing “Gate” from our name allows us to better communicate our huge<br />
product selection across multiple product lines. Our new logo is modern,<br />
reflects our state-of-the-art abilities, and emphasizes that we are an American<br />
company that manufactures everything in the United States.<br />
In addition to the name and logo change, our brand lineup will be simplified<br />
to: <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> <strong>Equipment</strong>, <strong>Tarter</strong> Goat and Small Animal<br />
<strong>Equipment</strong>, <strong>Tarter</strong> Equine <strong>Equipment</strong> and <strong>Tarter</strong> ATV <strong>Equipment</strong>.<br />
This name change signals the next chapter in our company’s history. We look<br />
forward to working with you in writing that chapter.<br />
Donald R. <strong>Tarter</strong> David A. <strong>Tarter</strong><br />
tartergate.com 3
On the farm for over 60 years.<br />
<strong>Tarter</strong> Company, LLC, founded in 1945, is still managed and owned by the <strong>Tarter</strong><br />
family. Unlike many other manufacturers in the industry, <strong>Tarter</strong> maintains total<br />
control of all phases of manufacturing, from raw material purchase to final delivery.<br />
C.V. <strong>Tarter</strong> founded the <strong>Tarter</strong> Gate Company, located in Dunnville, Kentucky, in<br />
1945. He made wooden farm gates by hand and sold them throughout the local<br />
area. He sold the business to his son and daughter-in-law, Roger and Vivian <strong>Tarter</strong>.<br />
They, along with their sons, Donald and David <strong>Tarter</strong>, expanded the business<br />
to include tubular and galvanized-steel gates along with other livestock-related<br />
products. Vivian is still an active, full-time member of the <strong>Tarter</strong> staff. Today’s <strong>Tarter</strong><br />
is a company C.V. would hardly recognize, although his great-grandchildren are<br />
carrying on the work he began more than a half-century before.<br />
Dedicated to serving you.<br />
<strong>Tarter</strong> has long been the leading national manufacturer of farm gates and animal<br />
management equipment in North America for many years. Our product lines for<br />
goat, equine, ATV, 3-point and all other farm and ranch needs are sought after in<br />
more than 7,000 farm and ranch stores nationwide. <strong>Tarter</strong> maintains state-of-the-<br />
art facilities in Dunnville, Kentucky and in Box Elder County, Utah. Both facilities<br />
manufacture a full line of corral panels, gates, feeders and associated farm and<br />
ranch equipment. In addition to these facilities we also have two facilities in Liberty,<br />
Kentucky – Liberty Water Tanks and <strong>Tarter</strong> Industries. These facilities manufacture a<br />
wide spectrum of stock tanks, 3-point equipment, rotary cutters, cattle-handling and<br />
other equipment for the goat, equestrian, cattle and hobby farm markets. <strong>Tarter</strong> is<br />
committed to serving all of its farm supply dealers with cutting-edge equipment and<br />
unparalleled service.<br />
Retailer friendly.<br />
<strong>Tarter</strong> sells all of its branded lines to the nation’s finest farm and ranch stores and<br />
does not sell to the public. We’re retailer friendly in the service we provide and in the<br />
marketing support that comes with every product we manufacture or sell. We know<br />
how to help our retailers buy the products that customers want at the value-driven<br />
prices that allow them to make profitable and competitive sales to the end-user.<br />
We commit to 10 or fewer days for delivery in the east and 14 or fewer days in<br />
the west – with no back-orders. Whether your order is fulfilled from our Utah or<br />
central Kentucky facilities, you will receive the best product at the best prices with<br />
unparalleled service and support. <strong>Tarter</strong> is continuing its heritage of moving forward<br />
to meet the needs of its customers.<br />
4 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
<strong>Tarter</strong> Industries
<strong>Tarter</strong> Plant 2<br />
C-ville Fabricating<br />
Liberty Water Tank<br />
<strong>Tarter</strong> Plant 1<br />
<strong>Tarter</strong> West<br />
<strong>Tarter</strong> Tube<br />
TRULY A NATIONAL COMPANY DEDICATED TO SERVING YOU<br />
tartergate.com 5
A T V E Q U I P M E N T<br />
You work hard. And you expect everything on your farm to work<br />
hard as well, including your ATV. It’s not just for recreation anymore.<br />
<strong>Tarter</strong> ATV <strong>Equipment</strong> provides the quality tools you need to put your<br />
ATV to work – making your job easier and more fun!<br />
Disc/Culti-Packer Combo ................7<br />
8-Blade Disc Harrow .....................7<br />
Culti-Packer Kit ............................7<br />
Chain Harrows ............................8<br />
5-Bushel Spreader ........................8<br />
Mobile <strong>Equipment</strong> Package ............9<br />
Wire Unrollers .......................10-11<br />
Hitches ................................10-11<br />
6 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
8-Blade disc Harrow<br />
The 8-Blade disc Harrow cuts and breaks even the most compacted soil. This disc harrow has<br />
been designed to make fast work of game plots or garden space, even in challenging off-road<br />
conditions. This disc harrow is heavy enough to avoid skipping along the surface, yet light<br />
enough for small tractors or aTVs to pull easily. The wheel assembly<br />
facilitates towing along paths or roadways, yet rotates out of the way<br />
when tilling. disc angles are adjustable from 0° to 20° and the depth<br />
control is as easily adjustable as the disc angle. other features of this<br />
heavy-duty tool include: 16" scalloped blades, 48" cutting<br />
width, 13" 4-ply tubeless tires, heavy-duty sealed bearings,<br />
and tubular steel frame construction. includes hookup points<br />
for optional culti-packer. This product features our durable,<br />
corrosion-resistant powder coat gray finish.<br />
culTi-Packer kiT<br />
This clever kit turns your heavy-duty <strong>Tarter</strong> disc<br />
Harrow into a combination disc/culti-Packer with<br />
the turn of a few bolts. a winch adjustment unit<br />
allows you to lower the culti-packer as needed to<br />
compact or compress the soil behind the 8-bladed<br />
discs that break up even the toughest surface soil.<br />
unit comes with picture-based assembly instructions.<br />
A T V E Q U I P M E N T<br />
disc/culTi-Packer comBo<br />
we combined the deep cutting ability of the 8-Blade Tillage disc with the soil preparation and compaction action of the culti-packer<br />
in this all-in-one implement. The disc/culti-Packer combo makes easy work with a single pass. The 16" tillage discs can be adjusted<br />
from 0° through 20° and provide a 48" cutting width. The ratchet action handle makes disc adjustment a snap and the heavy-duty,<br />
front-mounted winch makes culti-packer adjustment both easy and independent of the<br />
disc blades. The super heavy-duty steel frame and heavy-duty construction make this an<br />
even heavier tool (711 lbs.). The adjustable 13" 4-ply tubeless tires can be lowered for<br />
complete ground clearance (when towing or moving) or can be used<br />
to reduce drag depending on surface characteristics and aTV<br />
capabilities. This product features heavy-duty sealed bearings<br />
and our durable, corrosion-resistant powder coat gray finish.<br />
Description Item # Approx. Weight Height Width<br />
aTV culti-Packer attachment kit aTVcPak 350 lbs. 14 1/2" 57"<br />
Description<br />
disc/culti-Packer<br />
Item #<br />
Approx.<br />
Weight Height Length Width<br />
combo aTVcPdc 711 lbs. 34" 90" 76"<br />
Description<br />
aTV 8-Blade<br />
Item #<br />
Approx.<br />
Weight Height Length Width<br />
disc Harrow aTVTd8 430 lbs. 30" 61" 76"<br />
tartergate.com 7
A T V E Q U I P M E N T<br />
8 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
cHAIn HARROWS<br />
Garden tractors or ATVs can pull<br />
this flexible chain Harrow. Ideal<br />
for smoothing yards or garden soil<br />
and dragging driveways, riding<br />
tracks or arena footing. This harrow<br />
allows dozens of metal teeth to set<br />
up when pulled to grab the soil or<br />
grade surface. Harrows are 4' x 4'<br />
in size and can be assembled in a<br />
variety of configurations as shown.<br />
ATVH44 ATVH84<br />
Description Item # Approx. Weight Width Length Rod Size<br />
ATV 4' x 4' chain Harrow w/4' Drawbar ATVH44 95 lbs. 4' 4' 1/2"<br />
ATV 4' x 8' chain Harrow w/4' Drawbar ATVH48 159 lbs. 4' 8' 1/2"<br />
ATV 8' x 4' chain Harrow w/8' Drawbar ATVH84 194 lbs. 8' 4' 1/2"<br />
ATV 8' x 8' chain Harrow w/8' Drawbar ATVH88 322 lbs. 8' 8' 1/2" ATVH48 ATVH88<br />
Description Item # Approx. Weight Height Length Width<br />
ATV 5-Bushel Pull-Behind Spreader ATVS 136 lbs. 48" 6' including drawbar 40"<br />
5-BUSHEl PUll-BEHInD<br />
SPREADER/TRAIl FEEDER<br />
Even with its 5-bushel capacity, ATVs<br />
or garden tractors can easily tow this<br />
spreader. A broadcast, tow-behind<br />
spreader, this heavy-duty garden<br />
tool means business with an all-steel<br />
gear drive complete with grease<br />
fittings. This spreader is designed to<br />
cut down greatly on the number of<br />
passes necessary to fully cover your<br />
lawn, game plot or garden with a<br />
distribution up to 20' wide. This<br />
spreader will haul approximately<br />
300 lbs. of material and will cover<br />
approximately 65,000 square feet of<br />
area. The wide distribution pattern<br />
reduces over-fertilizing or underfertilizing.<br />
The hopper is solid steel<br />
for a rugged, long life. Wheel driven,<br />
the spreader requires no outside<br />
power and features pneumatic tires.<br />
Available in black only.
ATV mOBIlE EqUIPmEnT PAckAGE<br />
A T V E Q U I P M E N T<br />
A complete, mobile game plot package – ready to roll as a single unit! This package includes an ATV Disc/culti-Packer combo, ATV 5-Bushel Pull-Behind<br />
Spreader, and an ATV 4' x 4' chain Harrow with 4' drawbar, all on their own 12' x 82" 3,500-lb., single-axle trailer with ramp. The custom trailer features<br />
a front-mounted 1.9k winch with 2" x 15' strap with hook. It also comes with 2 trailer ball hookups for secure attachment of the spreader and combo. The<br />
trailer is extra wide at 82" and includes a heavy-duty 50" loading ramp for easy loading of equipment. Front-mounted jack with safety chains, light hookup,<br />
new 15" 4-ply tires and wheels, and a treated wood floor all add top value to this outstanding package.<br />
Description Item # Height Approx. Weight Width Length<br />
ATV mobile <strong>Equipment</strong> ATVmEP 30" to top of trailer side 2,300 lbs. 82" 50" rear ramp length<br />
Package 67" to top of upright trailer ramp 12' length of trailer bed<br />
15' 6" length of trailer w/tongue<br />
ATV <strong>Equipment</strong> Trailer ATVET 30" to top of trailer side 1,200 lbs. 82" 15' 6" length of trailer w/tongue<br />
67" to top of upright trailer ramp 12' length of trailer bed<br />
tartergate.com 9
A T V E Q U I P M E N T<br />
mUlTI-HITcH<br />
• This clever attachment allows the use<br />
of a hitch ball, pin pull or tow loop<br />
• Powder coated black for years of<br />
corrosion resistance<br />
• negative effect on ground clearance<br />
• mount accepts a 3/4" shaft trailer ball<br />
(ball not included)<br />
• Fits all ATVs with factory hitches<br />
• Includes all mounting hardware<br />
ATV WIRE UnROllER<br />
The heavy-duty, powder coated ATV Wire Unroller is perfect for tough fencing jobs in tight places. This<br />
fencer’s helper handles an entire roll of fencing wire and allows your ATV to do the work of a crew. The<br />
ATV Wire Unroller comes with a multi-receiver hitch for easy mounting. let this tough tool stand in for a<br />
handful of helpers. This product features our durable, corrosion-resistant powder coat gray finish.<br />
Description Item # Approx. Weight Height Length Width<br />
ATV Wire Unroller ATVWUGR 32 lbs. 12" 25" 24"<br />
10 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
mUlTI-REcEIVER HITcH<br />
• Use a hitch ball, pin pull or tow loop with<br />
this clever attachment<br />
• Unit provides standard 2" receiver that allows<br />
for multiple ball-mount or drop pin inserts<br />
• Trailer height adjustment made easy by<br />
reversing insert<br />
• Powder coated black for years of corrosion<br />
resistance<br />
• negative effect on ground clearance<br />
• mount accepts a 3/4" shaft trailer ball<br />
(ball not included)<br />
• Fits all ATVs with factory hitches<br />
• Includes all mounting hardware<br />
qUAD HITcH<br />
• Versatile hitch offers 4 attachment points<br />
• Easily mounts to any ATV with<br />
factory hitches<br />
• Use a hitch ball, clevis pin or chain hooks<br />
without changing hitches<br />
• Two loops provide anchor points when<br />
using a winch cable or tow strap<br />
• Powder coated black for years of<br />
corrosion resistance<br />
• Includes all mounting hardware<br />
2" ball<br />
not included.
qUAD REcEIVER HITcH<br />
• Versatile hitch offers 4 attachment points plus<br />
a receiver sleeve<br />
• Easily mounts to any ATV with factory hitches<br />
• Use a hitch ball, clevis pin or chain hooks without<br />
changing hitches<br />
• Two loops provide anchor points when using a winch<br />
cable or tow strap<br />
• Reversible hitch bar supported by a 5/8" hitch pin<br />
with a cotter key<br />
• Powder coated black for years of corrosion resistance<br />
• Includes all mounting hardware<br />
HITcH ExTEnDER<br />
A T V E Q U I P M E N T<br />
2" REcEIVER WIRE UnROllER<br />
The heavy-duty, powder coated 2" Receiver Wire Unroller is perfect for tough fencing jobs in tight<br />
places. This fencer’s helper handles an entire roll of fencing wire and allows your tractor or truck to<br />
do the work of a crew. let this tough tool stand in for a handful of helpers. Fits in any standard 2"<br />
receiver. This product features our durable, corrosion-resistant powder coat gray finish.<br />
Description Item # Approx. Weight Height Length Width<br />
2" Receiver Wire Unroller 2RWUGR 26 lbs. 12" 23" 24"<br />
• Provides a ball-mount or pin pull hitch an additional 14-1/2" from your ATV hitch<br />
• Includes mounting plate and hardware to bolt to any existing ATV hitch<br />
• Also fits in any standard 2" receiver<br />
• Height adjustment made easy by reversing insert<br />
• Powder coated black for years of corrosion resistance<br />
• mount accepts 3/4" shaft trailer balls (ball not included)<br />
Description Item # Approx. Weight Height Length Width<br />
ATV multi-Hitch ATVmH 3 lbs. 5" 9" 2-1/2"<br />
ATV multi-Receiver Hitch ATVmRH 6 lbs. 5" 9" 2-1/2"<br />
ATV quad Hitch ATVqH 3 lbs. 5" 10" 9"<br />
ATV quad Receiver Hitch ATVqRH 7 lbs. 5" 10" 8"<br />
ATV Hitch Extender ATVHE 3 lbs. 2-1/2" 14-1/2" 2"<br />
tartergate.com 11
E Q U I N E E Q U I P M E N T<br />
Time for an early-morning workout. It’s your time to relax and enjoy what<br />
you’ve worked so hard for. And you can, knowing that your investment is maintained<br />
with the highest-quality products. From stalls to feeders, <strong>Tarter</strong> Equine <strong>Equipment</strong><br />
has offered the finest in equine and sporting products since 1945.<br />
Stalls .......................................13<br />
Stall Doors ...............................14<br />
Saddle Racks ........................... 15<br />
Corral Panels ....................... 16-17<br />
Walk-Thrus .......................... 18-19<br />
Feeders .............................. 20-23<br />
Waterer and Earth Tube ...............23<br />
Equine Accessories .....................24<br />
12 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
Premium Horse stall<br />
our sliding-Door Horse stall is one of the leaders in the equestrian market. ideal for open<br />
barn/shed applications, the 7' tall sides and fronts can be ordered separately or as a complete<br />
unit. a stall front can be installed in an existing barn or you can convert a barn by using<br />
the entire stall. individual corner bracket allows for one or multiple side-by-side units.<br />
NOTE: Stalls do not include wood or other filler material. Stall brackets sold separately.<br />
this unit features:<br />
• 4' wide sliding door with smooth-operating ball-bearing rollers<br />
• optional swing-out poly or galvanized-back hay and grain feeders<br />
• 1⁄ 2" solid steel stall bars<br />
• Flat doorway threshold helps prevent catching or stumbling<br />
• unique latches that eliminate all sharp protrusions<br />
• stalls easily outfitted with 2x lumber or poly panels<br />
• available in gray powder coat<br />
Powder coated Approx.<br />
Description Item # Weight<br />
10' stall Front w/sliding Door sF10 207 lbs.<br />
10' stall side ss10 145 lbs.<br />
12' stall Front w/sliding Door sF12 234 lbs.<br />
12' stall side ss12 169 lbs.<br />
Accessories Approx.<br />
Description Item # Weight<br />
2-Way stall Bracket Pair sB2P 3-1/2 lbs.<br />
3-Way stall Bracket Pair sB3P 6 lbs.<br />
4-Way stall Bracket Pair sB4P 8 lbs.<br />
Wall-mount Bracket Pair sBWP 2 lbs.<br />
Horse stall Door rollers Hsr 1/2 lb.<br />
Hay & Grain Feeder Corner mount sCF 12 lbs.<br />
S T A L L S<br />
4-Way Stall<br />
Bracket<br />
2-Way Stall<br />
Bracket<br />
3-Way Stall<br />
Bracket<br />
Top & Bottom<br />
Wall-Mount<br />
Optional Corner Mount<br />
Poly Hay & Grain Feeder.<br />
Also available in Galvanized<br />
– see page 21.<br />
tartergate.com 13
S T A L L D O O R S<br />
14 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
FRESH AIRE STAll DOOR<br />
This beautiful but heavy-duty stall door from <strong>Tarter</strong><br />
features horse-safe construction and a yoke-style top<br />
that allows air to freely circulate above and below the<br />
door itself. The Fresh Aire Stall Door features a powder<br />
coat gray finish that is both beautiful and practical.<br />
It is designed to handle 2x lumber or polycarbonate<br />
material and is available in 4' and 5' heights. This door<br />
is 51" wide and comes with heavy-duty adjustable<br />
hinges and 6" x 3/4" galvanized screw-in lag pins.<br />
Approx.<br />
Description Item # Weight<br />
4' Tall Stall Door w/Yoke Top SDYT4 65 lbs.<br />
5' Tall Stall Door w/Yoke Top SDYT5 80 lbs.
Single Saddle Rack<br />
Floor Stand<br />
SSRS<br />
SInGlE SADDlE RAck<br />
Single Saddle Rack Shelf<br />
with Wall Mount<br />
SSRWM<br />
Wall-Mount<br />
Brackets<br />
SRB<br />
This heavy-duty saddle rack can be mounted to any<br />
flat surface for secure saddle management. Remove<br />
the wall connectors, and it becomes another<br />
interchangeable rack on the freestanding saddle rack<br />
shown below. Saddle rack (single) can be mounted<br />
to wall, trailer or any other flat surface.<br />
Single Saddle<br />
Rack Shelf<br />
SSR<br />
mUlTIPlE SADDlE RAck<br />
Our heavy-duty freestanding saddle<br />
rack can be configured to hold from<br />
1 to 3 fully interchangeable racks. With<br />
the purchase of 2 wall connectors, any<br />
of the racks can easily convert to wall<br />
mount if so desired.<br />
Multiple saddle racks hold and protect<br />
English or Western saddles.<br />
STR (shown beside SSRWM)<br />
S A D D L E R A C K S<br />
SInGlE & mUlTIPlE SADDlE RAckS<br />
Saddle Racks from <strong>Tarter</strong> are designed for<br />
ease of installation and proper tack room<br />
organization. made from 1-3/4" tubing, they<br />
feature a rugged gray powder coat finish and<br />
26" rack arms.<br />
Description Item # Height Approx. Weight Width Length<br />
Single Saddle Rack Shelf SSR 19" 10 lbs. 13" 30"<br />
Single Saddle Rack Shelf w/Wall mount SSRWm 25" 11 lbs. 13" 30"<br />
Single Saddle Rack Floor Stand SSRS 28" 16 lbs. 30" 31"<br />
multiple Saddle Rack (Stand w/2 Shelves) STR 68" 36 lbs. 30" 31"<br />
Wall-mount Brackets/Pair SRB 6" 1 lb. 4" 6"<br />
Multiple Saddle Rack<br />
(Stand with 2 Shelves)<br />
STR<br />
tartergate.com 15
C O R R A L P A N E L S<br />
cORRAl PEn cAlcUlATOR<br />
1) To find the number of panels needed, multiply the desired diameter (straight line passing through the<br />
center of the circle) by 3.14. This will determine the circumference (the distance around the circle).<br />
2) Divide the circumference by the length of panels being used. This will equal the number of panels needed.<br />
Now available in 16' length – HCP516<br />
HCPW512 – Bright White!<br />
16 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Diameter of Holding Area (Feet)<br />
Panel Length 20' 25' 30' 35' 40' 45' 50' 55' 60' 65' 70' 75' 80' 85' 90' 95' 100'<br />
10' 6 8 9 11 13 14 16 17 19 20 22 24 25 27 28 30 31<br />
12' 5 7 8 9 10 12 13 14 15 16 18 20 21 22 24 25 26<br />
16' 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20<br />
NOTE: Sizes of pens are approximate. Pen sizes will vary depending on the size of the Walk-Thru Arch Gate used.<br />
Walk-Thru Arch Gates are available in 6' lengths only for horse corral panels. We also have available a 6' panel<br />
welded to a 6' arched gate which makes for a more rigid entry into the corral or for building 12' x 12' square<br />
corrals with individual openings.<br />
10' Panel – HCP512
Straight End<br />
Posts & Chain<br />
Latch Hookups<br />
HORSE cORRAl PAnElS<br />
Cup Assembly<br />
for Tighter and<br />
More Secure Fit<br />
C O R R A L P A N E L S<br />
Available in 5' and 6' tall configurations, <strong>Tarter</strong> corral Panels feature straight end posts and chain latch hookups. lightweight but sturdy, these panels<br />
are great for transporting as well as stationary placement. Our cup assembly makes a tighter and more secure fit. With horse and rider safety as our<br />
primary design goal, the exterior single-side pipe bracing provides a continuous and smooth interior surface. The 5' tall panels are available in 10', 12'<br />
and 16' lengths in gray powder coat. The 6' tall panels are available in 12' lengths only in gray powder coat. The 12'/5' tall panel is now also available<br />
in a bright white powder coat. Available individually or in bundles of 12.<br />
Description Item # Approx. Weight Color<br />
5' Tall x 10' long corral Panel HcP510 48 lbs. Gray<br />
5' Tall x 12' long corral Panel HcP512 56 lbs. Gray<br />
5' Tall x 16' long corral Panel HcP516 73 lbs. Gray<br />
6' Tall x 12' long corral Panel HcP612 61 lbs. Gray<br />
5' Tall x 12' long corral Panel HcPW512 56 lbs. White<br />
tartergate.com 17
W A L K - T H R U S<br />
18 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Horse Walk-THrus<br />
The <strong>Tarter</strong> Walk-Thru arch Gate is<br />
designed to complement our 5' and<br />
6' tall corral panels. This walk-thru<br />
arch gate features a chain latch<br />
hookup to your corral, a high-mount<br />
latch for easy opening, and a 9' arch<br />
with a 6' wide opening. The 5' tall<br />
gate is available in white or gray<br />
powder coat only. The 6' tall gate is<br />
available in gray powder coat only.<br />
6' Tall Gate – HWT66<br />
Description Item # Gate Height Arch Height Approx. Weight Color<br />
6' Wide Walk-Thru HWT56 5' 9' 70 lbs. Gray<br />
6' Wide Walk-Thru HWT66 6' 9' 73 lbs. Gray<br />
6' Wide Walk-Thru HWTW56 5' 9' 70 lbs. White<br />
All-White 5' Tall Round Pen
HORSE WAlk-THRUS WITH PAnEl<br />
5' Tall Gate & Panel – HWT566<br />
W A L K - T H R U S<br />
<strong>Tarter</strong> Walk-Thru Arch Gates with Panels are designed to complement our 5' and 6' corral panels. Providing a 6' wide opening, these walk-thrus are<br />
available with 9' arches in gray powder coat. The gate also features a chain latch hookup to your corral and a high-mount latch for easy opening. The<br />
6' panel welded to the 6' arch makes for an even sturdier entry point and also enables 12" x 12' square corral enclosures, each with their own entry.<br />
Description Item # Gate Height Length Approx. Weight Color<br />
Walk-Thru w/Panel HWT566 5' 12' 100 lbs. Gray<br />
Walk-Thru w/Panel HWT666 6' 12' 127 lbs. Gray<br />
6' Tall Gate & Panel – HWT666<br />
tartergate.com 19
F E E D E R S<br />
3-PIEcE HORSE HAY FEEDER<br />
RHF<br />
Our 3-piece, open-top A-frame Horse Hay Feeder is 8' in diameter<br />
with 1-3/4" round tubing for extra strength. With loop legs that<br />
prevent sinking into the ground and the 17" metal hay-saver panel,<br />
this feeder stands 50" high and is available in red powder coat only.<br />
20 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
3-PIEcE HORSE HAY FEEDER<br />
RHFTO<br />
Our 3-Piece Horse Hay Feeder is 8' in diameter with 1-3/4" round tubing<br />
for extra strength. This open-top horseshoe-style feeder stands 50" high,<br />
has loop legs that prevent sinking into the ground, wide openings for easy<br />
access, and is available in red powder coat only.<br />
Description Item # Approx. Weight<br />
8' 3-Pc. Horse or Horned cattle Hay Feeder with Hay Saver & loop legs – Red RHF 190 lbs.<br />
8' 3-Pc. Horse Hay Feeder with loop legs – Red RHFT0 147 lbs.<br />
NOTE: All feeders come complete with bolts and nuts. Recommended for tough situations.<br />
A-FRAmE lARGE BAlE FEEDER<br />
This feeding unit is specially designed for the feeding of large bales<br />
to horses or horned cattle. The A-frame design is strong, constructed<br />
out of 2" 16-gauge tubing, stands 49" high and connects easily with<br />
attached, horse-safe drop pins. Unit comes in kits of 4 pieces – two 6'<br />
panels and two 10' panels – or sold as individual panels. The large Bale<br />
Feeder features our corrosion-resistant powder coated green finish.<br />
Description Item # Approx. Weight Height Width Length<br />
A-Frame large Bale Feeder AFBF 276 lbs. 49" 6' 10'<br />
10' A-Frame Panel AFHP10 84 lbs. ––– 2" 10'<br />
6' A-Frame Panel AFHP6 54 lbs. ––– 2" 6'<br />
For our complete line of Cattle Round Bale Hay Feeders, please see the <strong>Farm</strong> & <strong>Ranch</strong> section, pages 44-45.
Approx.<br />
Description Item # Height Weight Width Depth<br />
Poly Hay & Grain Feeder, GFP 32" 10 lbs. 24" 18"<br />
Wall mount<br />
Poly Hay & Grain Feeder, ScF 32" 12 lbs. 29-1/2" 20"<br />
corner mount<br />
Galvanized Hay & Grain Feeder, ScFG 33" 34 lbs. 29" 20"<br />
corner mount<br />
Galvanized Rod Hay Feeder, WmHF 28-1/2" 6 lbs. 24" 20" top<br />
Wall mount 7" bottom<br />
Galvanized Rod Hay Feeder, cmHF 31" 5.4 lbs. 30" 19-1/2" top<br />
corner mount 1" bottom<br />
POlY HAY & GRAIn FEEDERS<br />
WMHF<br />
SCFG<br />
F E E D E R S<br />
These sturdy, wall- or corner-mounted Poly Hay and Grain<br />
Feeders hold 3 flakes of hay in the 3/8" galvanized rod<br />
manger and up to 4 gallons of grain in the lower poly<br />
feeder. The galvanized sheet metal back version is available<br />
as a corner-mount only.<br />
Easy to clean, fill<br />
and maintain, these<br />
feeders work for<br />
a variety of feeding<br />
applications.<br />
GFP<br />
SCF<br />
GAlVAnIzED mAnGER FEEDERS<br />
These sturdy, wall- or corner-mounted hay feeders hold<br />
3 flakes of hay in the 3/8" galvanized rod manger.<br />
Easy to clean, fill and maintain,<br />
these feeders work for a variety<br />
of feeding applications.<br />
CMHF<br />
tartergate.com 21
F E E D E R S<br />
5' 1-PIEcE HEAVY-DUTY<br />
BUnk FEEDERS<br />
Horse lovers will prefer our 1-Piece<br />
Heavy-Duty Horse Bunk Feeder standing<br />
33" high and available in only the 5' length.<br />
Our replaceable bunk liner is formed from a<br />
single solid piece of 100% recycled materials,<br />
10" deep x 25" wide with weep holes for<br />
drainage. It is built rugged to withstand<br />
abuse from any size herd. This feeder also<br />
features a superior welded frame in red or<br />
galvanized. Also available is a 5' bolt-on<br />
galvanized hay rack for added versatility.<br />
Shown with optional<br />
v-style Hay Rack.<br />
5-GAllOn BUckET HOlDER<br />
22 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Description Item # Height Approx. Weight<br />
5' Hay Rack, Galvanized Only HR5 35" 48 lbs.<br />
5' 1-Pc. Poly Horse Bunk Feeder – Red Frame 1PHB5 33" 38 lbs.<br />
5' 1-Pc. Poly Horse Bunk Feeder – Galvanized Frame 1PGHB5 33" 38 lbs.<br />
5' 1-Pc. Poly Bunk Feeder liner 1PBl5 – 6 lbs.<br />
NOTE: Replacement liners available.<br />
This bucket holder is lightweight, portable and has an easy bolt-on hanging system that allows<br />
you to quickly and easily hang it on the side of a stall or fence for quick and easy feeding and<br />
watering. Whether on the farm or at a show, you’ll find the versatility of this bucket holder to<br />
be unsurpassed. Available in powder coat red only. Bucket not included.<br />
Approx. Inside<br />
Description Item # Height Weight Width Depth Diameter Capacity<br />
5-Gallon Bucket Holder 5GBH 11-1/8" 5 lbs. 12-3/16" 12" 11-11/16" 5 gallons<br />
For our complete line of Cattle Bunk Feeders,<br />
please see the <strong>Farm</strong> & <strong>Ranch</strong> <strong>Equipment</strong> section, page 51.<br />
EqUInE HAY BASkET<br />
This hay basket is the perfect means for feeding square bales to horses<br />
in their natural feeding position while at the same time keeping the<br />
hay dry and off the ground. It features a smooth-sided poly basket for<br />
horse safety that is fully removable for easy cleaning and has large vent<br />
holes to let moisture out and keep hay in. Heavy-duty 1-3/4" round<br />
tubing is horse safe with no sharp edges. This product features our<br />
durable, corrosion-resistant powder coat finish in red.<br />
Approx.<br />
Description Item # Height Weight Diameter<br />
Equine Hay Basket EHB 34" 70 lbs. 64"
PORTABlE<br />
GATE FEEDER<br />
This Portable Gate Feeder is<br />
made of heavy polyethylene<br />
to endure the harsh<br />
elements. This feeder hangs<br />
on the side of our gates,<br />
corrals, and fences at any<br />
height. The portability,<br />
variable height and angled<br />
design make feeding much<br />
easier for all livestock from<br />
hogs to calves to horses. Available in 6- or 15-gallon.<br />
Description Item # Height<br />
Approx.<br />
Weight Capacity<br />
Portable Gate Feeder – large PGF 29" 6 lbs. 15 gallons<br />
Portable Gate Feeder – Small SPGF 24" 4 lbs. 6 gallons<br />
F E E D E R S<br />
PADDOck mASTER HAY & GRAIn FEEDER<br />
The Paddock master from <strong>Tarter</strong> is the ultimate hay and<br />
grain feeder for horses. This gray powder coated feeder<br />
is the heaviest in its class. Almost 6' tall and weighing<br />
260 lbs., this all-steel feeder can withstand the elements<br />
as well as the horses. This high-capacity hay and grain<br />
feeder handles large animals as well as large volumes of<br />
feed with ease. This feeder allows your horse to eat grain<br />
or hay in a lateral plane without looking up at the food,<br />
which can cause dust and food particles to fall into the<br />
eyes and nose and become an irritant.<br />
Description<br />
Paddock master<br />
Item # Height<br />
Approx.<br />
Weight<br />
Hay & Grain Feeder HHGF 69-1/2" 260 lbs.<br />
WEE10<br />
2.9-GAllOn ElEcTRIc WATERER<br />
This Electric Waterer is built of a polyethylene construction creating<br />
a strong, corrosion-free product that provides many years of troublefree<br />
operation. The polyethylene used in our waterers is FDA and HPB<br />
approved, food grade, recyclable plastic. It is engineered to allow easy<br />
access to electrical components, water line, incoming services and<br />
effortless cleaning. The 250-watt submersible heater features a unique<br />
grounding mechanism. The rounded corner design easily handles animal<br />
abuse while ensuring livestock safety, and meets “Grade A” Dairy<br />
requirements. The Electric Waterer can be wall or floor mounted.<br />
Approx.<br />
Description Item # Height Weight Width Length<br />
Electric Waterer WEE10 13-1/2" 26 lbs. 17" 17"<br />
Earth Tube IET 49" 22-1/2 lbs. 12-3/4" –––<br />
For our complete line of Electric Waterers, please see<br />
the <strong>Farm</strong> & <strong>Ranch</strong> <strong>Equipment</strong> section, page 64.<br />
tartergate.com 23
e q u i n e a c c e s s o r i e s<br />
HMB23<br />
HM23<br />
Barn JockEy<br />
this lightweight folding<br />
combination cart and<br />
dolly from tarter is a<br />
must for dozens of barn<br />
and household chores.<br />
the Barn Jockey has<br />
features designed for use<br />
in difficult environments.<br />
Features include: 800-lb.<br />
capacity, 4 tie-down<br />
cleats, pneumatic tires<br />
and reinforced frame.<br />
Description Item # Height Approx. Weight Width Length<br />
Barn Jockey BJ 52" 45 lbs. 26" 33"<br />
EntrancE MatS<br />
announce your entrance as a “horse-friendly” place with the tarter<br />
2' x 3' horse entrance mat. the same pliant black rubber mat as that<br />
used in our stall mats, this entrance version is much lighter (15 lbs.),<br />
sized to fit any door (2' x 3'), and available in beige or black.<br />
Stall MatS<br />
this thick, pliant rubber mat is perfect for concrete stall surfaces or in<br />
trailers or other areas where hard surfaces can cause fatigue and muscle<br />
soreness. this cushioned mat provides comfort for people as well as their<br />
horses. available in black in pallets of 25 only, these mats are 4' x 6' x 3/4".<br />
Description Item # Approx. Weight Width Length Thickness Color<br />
2' x 3' Horse Entrance Mat HM23 15 lbs. 2' 3' 1/2" Black on Black<br />
2' x 3' Horse Entrance Mat HMB23 15 lbs. 2' 3' 1/2" Beige on Black<br />
Horse Stall Mat HSM 90 lbs. 4' 6' 3/4" Black<br />
24 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Muck Man<br />
Muck pail, garbage can or any difficult<br />
load moves smoothly and easily with<br />
the Muck Man. It’s packed with<br />
features that challenge the toughest<br />
barn or outdoor environment. Features<br />
include: 300-lb. capacity, easy folding,<br />
pneumatic tires and cushioned,<br />
adjustable handle. Bucket not included.<br />
Description Item # Height Approx. Weight Width Length<br />
Muck Man MM 47" 25 lbs. 30" 42"<br />
HSM
G OAT A N D S M A L L A N I M A L E Q U I P M E N T<br />
Animals are your business and your life. You need both to<br />
run smoothly and efficiently, so quality equipment is necessary.<br />
<strong>Tarter</strong> offers the only full line of Goat and Small Animal <strong>Equipment</strong><br />
designed by professionals to meet the needs of animals and their owners.<br />
Trough Feeder .............................. 26<br />
Waterer ...................................... 26<br />
Grooming Stand ........................... 27<br />
Goat Gofer .................................. 27<br />
Goat Worker ................................ 28<br />
Kidder Panels ............................... 29<br />
Pipe Panels .................................. 29<br />
Hay Racks and Feeders ................. 30<br />
Canine <strong>Equipment</strong> ........................ 31<br />
tartergate.com 25
F E E D E R S a n D w a t E R E R S<br />
Trough Feeder<br />
Anyone who knows goats knows that if they can get in it and turn it over, they will. That’s why <strong>Tarter</strong> designed this super-sturdy,<br />
heavy-duty trough feeder. This feeder cannot be pushed around or turned over and the overhead guard and v-bottom prevent<br />
even the most determined goats from standing on top. Low to the ground, this v-style trough is perfect for almost any size goat<br />
or other small animals. This product features our durable, corrosion-resistant finish in powder coat red.<br />
TF4<br />
Description Item # Height Approx. Weight Width Length<br />
4' Trough Feeder TF4 17" 60 lbs. 32" 48"<br />
8' Trough Feeder TF8 17" 118 lbs. 32" 96"<br />
eLecTric WATerer<br />
designed low to the ground with easy access for goats and other small animals, this electric<br />
Waterer also features rounded corners to handle livestock abuse while ensuring their safety.<br />
Built using 100% polyethylene construction, this corrosion-free product provides years of<br />
trouble-free operation. it is designed with the protection of the livestock in mind, no contact<br />
of any electrical component is in or touches the water – result: no stray voltage. cSA certified.<br />
The polyethylene used is FdA and hPB approved, food grade, recyclable plastic.<br />
Description Item # Height Approx. Weight Width Length Capacity Heating Element<br />
electric Waterer Wee20 16" 32 lbs. 21-3/4" 28" 5-1/5 gallons 250 watts<br />
earth Tube ieT 49" 22-1/2 lbs. 12-3/4" ––– ––– –––<br />
For our complete line of Electric Waterers, please see the <strong>Farm</strong> & <strong>Ranch</strong> <strong>Equipment</strong> section, page 64.<br />
26 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
GROOmInG STAnD<br />
G R O O M I N G S T A N D A N D G O F E R<br />
Shown with<br />
optional<br />
side rails.<br />
Ideal for grooming goats, sheep, calves or other small animals for 4-H projects, animal shows, or county fairs. Winch elevation puts animal at the perfect<br />
height for effortless grooming. Easily transported, the Grooming Stand makes an ideal work platform for barn or exhibition area. Folds flat for moving and<br />
storage. Wheels make for easy transport. This product features our durable, corrosion-resistant powder coat finish in red.<br />
Description Item # Height Approx. Weight Width Length<br />
Goat Grooming Stand GGS 45" 110 lbs. 24" 65"<br />
Goat Grooming Stand Side Rails GGSR 32" 5 lbs. 1" 23-1/4"<br />
GOAT GOFER<br />
Any goat farmer will attest to the fact that goats are difficult to contain. This<br />
makes transport particularly tricky, but with the high-quality galvanized steel<br />
<strong>Tarter</strong> Goat Gofer, you are ensured a virtually escape-proof move. Available in<br />
both standard and compact sizes, it fits easily into the back of standard and<br />
compact pickups even with toolboxes, and can be used to transport goats,<br />
hunting dogs, calves, sheep or other small animals.<br />
Description Item # Height Approx. Weight Width Length<br />
compact Goat Gofer GGc 41" 100 lbs. 38" 53"<br />
Full-Size Goat Gofer GGFS 41" 110 lbs. 47" 53"<br />
tartergate.com 27
G O A T W O R K E R<br />
GOAT WORkER<br />
Optional Front<br />
Alley Ramp<br />
(GAR)<br />
The Goat Worker works<br />
interchangeably using corral pin<br />
hookups with all sizes of kidder<br />
panels, kidding pens and walk-thrus.<br />
You can design pens and alleyways<br />
to fit your own unique needs.<br />
In the past, trimming feet, tattooing and other goat maintenance tasks<br />
required a team effort, but the <strong>Tarter</strong> Goat Worker makes working<br />
your herd a one-person job. The Goat Worker is made both attractive<br />
and durable by the application of a powder coated finish designed to<br />
hold up to the most difficult environments. Our Goat Worker combines<br />
a headgate, chute, stand, alley gates, pendulum gate, alley ramp and<br />
nosebar. Optional front ramp is available for easier exit of larger goats.<br />
We’ve created an ergonomic and especially humane design for your<br />
comfort, and for the comfort and safety of your animals. This product<br />
features our durable, corrosion-resistant powder coat finish in red.<br />
28 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Multi-level<br />
corral hookups<br />
allow for easy<br />
2-way, 3-way<br />
or 4-way<br />
connections.<br />
Entire unit<br />
ships complete<br />
on single pallet.<br />
Approx.<br />
Description Item # Height Weight Width Length<br />
Goat Worker<br />
(fully assembled) GW 7' 410 lbs. 30" 10'<br />
Headgate GH 46" 90 lbs. 30" –––<br />
chute Gc 50" 140 lbs. 21" 48"<br />
Stand GS 22" 24 lbs. 22" 56"<br />
Alley Gates (set) GAG 36" 54 lbs. ––– 60"<br />
Pendulum Gate GPG 84" 58 lbs. 24" –––<br />
Alley Ramp GAR 2" 40 lbs. 18" 60"<br />
nosebar GnB ––– 4 lbs. 7" 28"
kIDDER PAnElS<br />
K I D D E R A N D P I P E P A N E L S<br />
8' PIPE PAnEl<br />
Our exclusive <strong>Tarter</strong> kidder Panel is one of the most versatile kidding pens on<br />
the market and is ideal for kids, calves and other small animals. It can be sized<br />
to any dimension by attaching multiple units made from fully interchangeable<br />
5' and 10' panels of high-quality galvanized steel. Panels can also be used to<br />
make chutes, alleyways or as entry to the <strong>Tarter</strong> Goat Worker.<br />
Description Item # Height Approx. Weight<br />
5' kidding Pen Panel kP5 52" 27 lbs.<br />
10' kidding Pen Panel kP10 52" 50 lbs.<br />
5' kidding Pen Walk-Thru Gate kPW5 7' 60 lbs.<br />
5' x 5' kidding Pen<br />
Walk-Thru Gate and Panel kPW55 52"/ 7' 78 lbs.<br />
This panel has been designed as an enclosure for small animals including goats or sheep.<br />
Each panel features a female and a male connection point so that multiple panels attach<br />
quickly and easily to form round or square pens, runways or other configurations. Available<br />
in 4' and 8' lengths, the superior powder coat finish ensures a longer life in the field. We<br />
also offer a Walk-Thru Arch Gate for even more versatility. Available in red 1-1/4" steel<br />
tubing, this panel is lightweight and should be used for small animal confinement only.<br />
Description Item # Height Approx. Weight<br />
4' Pipe Panel w/Hardware PPWR4 36" 15 lbs.<br />
8' Pipe Panel w/Hardware PPWR8 36" 24 lbs.<br />
4' Pipe Panel Walk-Thru Arch Gate PPWTR4 74" 23 lbs.<br />
NOTE: Recommended for small animal confinement only.<br />
PPWR8 PPWTR4<br />
tartergate.com 29
H A Y R A C K S A N D F E E D E R S<br />
HAY RAck<br />
The high-quality galvanized steel <strong>Tarter</strong> Hay Rack is easy to set up and<br />
easy to store, and is sized to place feed in wire mesh at the ideal height<br />
for goats. This rack is excellent for calves and other small animals as<br />
well. Available in 4' and 8' lengths, this feeder folds completely<br />
flat and will fit in a truck bed or other small area for easy transport.<br />
Description Item # Height Approx. Weight Length<br />
4' Goat Hay Rack GH4 50" 65 lbs. 48"<br />
8' Goat Hay Rack GH8 50" 92 lbs. 96"<br />
1- TO 1-1/2-GAllOn PORTABlE<br />
HAnGInG BUckET HOlDER<br />
This ingenious bucket-mount is sized<br />
to hold a standard 1- to 1-1/2-gallon<br />
bucket on wire fence via a single pin<br />
attachment. lightweight yet sturdy, use<br />
this easily adjustable mount for feed or<br />
water. Bucket not included. Available in<br />
powder coat red only.<br />
PORTABlE HAnGInG FEEDER<br />
30 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
BUnk FEEDER AnD HAY RAck<br />
This versatile, lightweight feeder is built low to the ground to accommodate<br />
goats and all types of short-to-medium sized animals. Extremely durable, this is<br />
one of the sturdiest feeders of its kind on the market. The bunk liner is formed<br />
of 100% recycled materials. The feeder is available with or without the hay<br />
rack, which bolts directly to the frame. The hay rack is galvanized for excellent<br />
durability and features 4" x 4" wire mesh for easy feeding and minimal waste.<br />
This specially designed hay feeder is lightweight,<br />
portable and has an easy one-pin hanging system that<br />
allows you to quickly and easily attach it to any kidding<br />
pen or other goat panel for quick and easy feeding. This<br />
feeder is perfect for feeding small animals, is easy to<br />
transport, and is made of high-quality galvanized steel<br />
for years of carefree service. Whether on the farm or at a<br />
show, you’ll find unsurpassed versatility from this feeder.<br />
Shown with optional Goat Hay Rack.<br />
Description Item # Height Approx. Weight Width Length<br />
Goat Bunk Feeder GSBF 14" 40 lbs. 27" 64"<br />
Goat Hay Rack GH5 24" 20 lbs. 24" 64"<br />
GOAT mInERAl FEEDER<br />
Our <strong>Tarter</strong> Goat mineral Feeder is custom<br />
built with extra-long legs to prevent tipping<br />
or being pushed around, yet places the<br />
minerals at the ideal height for small animals.<br />
Featuring a thick poly tub, protective molded<br />
wind vane, heavy-duty roller bearing and<br />
64"-diameter base, it is available in durable,<br />
corrosion-resistant powder coat red.<br />
Description Item # Height Approx. Weight Width Length Diameter Capacity<br />
Portable Hanging Bucket Holder GBH 8" 5 lbs. 11" 12" 10-1/4" 1 to 1-1/2 gallons<br />
Portable Hanging Goat Feeder PHGF 26" 10 lbs. 21" ––– ––– –––<br />
Goat mineral Feeder GmF 31" 29 lbs. 64-1/2" ––– ––– –––
ElITE SERIES<br />
DOG kEnnEl<br />
There is no other kennel<br />
that comes close to the<br />
quality, durability, and<br />
outstanding good looks<br />
of the Elite kennel from<br />
<strong>Tarter</strong>. Our finest kennel,<br />
this unit is designed for rugged<br />
outdoor use in difficult environments. Each panel is heavy-duty<br />
1-3/4" tubing and filled with sturdy 8-gauge 2" x 4" wire. The front<br />
panel features a durable door that creates a 2-1/2' x 5' 8" opening,<br />
complete with slam latch. Whether for your favorite hunting dogs<br />
year-round or as a secure outdoor getaway for everyday household<br />
pets, there’s no kennel that matches the Elite kennel for style and<br />
durability. The complete kennel measures 6' tall x 10' wide x 10' long<br />
and weighs 273 lbs. While other products are painted, only the Elite<br />
kennel from <strong>Tarter</strong> is powder coated to provide a long life in the<br />
harsh elements outdoors. Available in powder coat gray only.<br />
10WKWD<br />
DOG kEnnElS & SHADES<br />
Our welded kennels are superior in the canine and small animal<br />
containment market because of their strong galvanized 1-3/8"<br />
tubular frame and heavy-duty 11-1/2-gauge chain link wire. Built<br />
to contain multiple animals whether they are large or small breeds,<br />
these kennels are easily assembled and can be moved in a matter<br />
of minutes. Our 6' kennels are available with 1 or 2 doors or with<br />
a divider and 2 doors. An additional mid-section brace on each<br />
panel adds extra sturdiness. We also offer dog kennel shades in a<br />
super-tough polypropylene U.V.-stabilized fabric. The shades provide<br />
protection from sun and serve as a lightweight security cover for<br />
your pets and possessions. measuring 10' x 10', they have grommets<br />
for easy installation without tools and come complete with zip-ties.<br />
C A N I N E E Q U I P M E N T<br />
DKHDG<br />
Description Item #<br />
Approx.<br />
Weight<br />
6' x 10' x 10' complete Heavy-Duty Dog kennel DkHDG 273 lbs.<br />
6' x 10' Heavy-Duty Dog kennel – Front – Gray DkFHDG 84 lbs.<br />
6' x 10' Heavy-Duty Dog kennel – Side – Gray DkSHDG 63 lbs.<br />
6' x 10' Heavy-Duty Dog kennel – Front w/2 Doors – Gray DkF2DHDG 96 lbs.<br />
6' x 5' Heavy-Duty Dog kennel – Side – Gray DkSHDG5 42 lbs.<br />
6' x 5' Heavy-Duty Dog kennel – Front – Gray DkFHDG5 53 lbs.<br />
Heavy-Duty Dog kennel clamp Set DkcHD 2 lbs.<br />
Dog kennel Slam latch DkSl 2 lbs.<br />
10WK<br />
Dog Kennel Shade<br />
Cover – DKSC<br />
Approx.<br />
Description Item # Weight<br />
4' x 10' x 10' complete Welded kennel w/Door 10Wk4 133 lbs.<br />
4' x 10' Welded kennel Section 10WkS4 31 lbs.<br />
4' x 10' Welded kennel Section w/Door 10WkD4 40 lbs.<br />
6' x 10' x 10' complete Welded kennel w/Door 10Wk 181 lbs.<br />
6' x 10' Welded kennel Section 10WkS 42 lbs.<br />
6' x 10' Welded kennel Section w/Door 10WkD 55 lbs.<br />
6' x 10' x 10' complete Welded kennel w/2 Doors 10Wk2D 204 lbs.<br />
6' x 10' x 10' complete Welded kennel w/Divider & 2 Doors 10WkWD 246 lbs.<br />
6' x 10' x 10' Welded kennel Section w/2 Doors 10WkD2 78 lbs.<br />
10' x 10' Dog kennel Shade covers DkSc 3-1/2 lbs.<br />
tartergate.com 31
FA R M A N D R A N C H E Q U I P M E N T<br />
You raise animals for a living. You depend on them and they depend on you.<br />
So your choice of <strong>Farm</strong> and <strong>Ranch</strong> <strong>Equipment</strong> is important to you both. Since<br />
1945, <strong>Tarter</strong> has produced the largest line of quality-made animal management<br />
equipment available, including tubular and galvanized-steel gates, corral fencing<br />
and a host of other products to meet all your needs.<br />
Gates ..................................... 33-36<br />
Continuous Fencing..................... 37<br />
Corral Panels.......................... 38-40<br />
Corral Panel Carrier ..................... 40<br />
Walk-Thrus............................. 41-42<br />
Feeder Panels .............................. 43<br />
32 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Hay Feeders ........................... 44-45<br />
Valu-Line Products ................. 46-47<br />
Gate Accessories ......................... 48<br />
Mineral Feeders .......................... 49<br />
Bunk Feeders ......................... 50-51
6-BAR EcOnOmY TUBE GATE<br />
G A T E S<br />
The perfect gate between pastures and entries, our 1-3/4" rounded high-tensile strength tubing with superior continuous-welded<br />
saddle joints has the quality that has made <strong>Tarter</strong> the leader in farm gate products. 50" high with vertical “z” Braces, this gate features<br />
a superior powder coat finish to ensure longer life in the field. All gates are available in lengths from 4' to 20' and come complete with<br />
hinges, hinge pins and 22" snap chain. Available in green and red.<br />
6-BAR EcOnOmY GAlVAnIzED TUBE GATE<br />
Length Vertical “Z” Braces Approx. Weight Green Item # Red Item #<br />
4' 0 17 lbs. 6EG4 6ER4<br />
6' 1 26 lbs. 6EG6 6ER6<br />
8' 1 34 lbs. 6EG8 6ER8<br />
10' 1 42 lbs. 6EG10 6ER10<br />
12' 2 51 lbs. 6EG12 6ER12<br />
14' 2 60 lbs. 6EG14 6ER14<br />
16' 3 69 lbs. 6EG16 6ER16<br />
18'* 3 78 lbs. 6EG18 6ER18<br />
20'* 4 87 lbs. 6EG20 6ER20<br />
*Has 3 hinges and 3 hinge pins.<br />
NOTE: All gates are 3" shorter than listed length to allow for gate hardware and proper clearance.<br />
Recommended for light confinement only.<br />
Our Economy Galvanized Tube Gate has the quality, features<br />
and durable value you’ve come to expect from <strong>Tarter</strong>. This<br />
gate is perfect for placement at construction sites, for crowd<br />
control, or for fencing pastures, orchards, and gardens. 50"<br />
high with vertical “z” Braces, this gate is made from 1-3/4"<br />
round high-tensile strength galvanized tubing with superior<br />
continuous-welded saddle joints. Gates come with hinges,<br />
hinge pins and 22" snap chain. Available in 4' to 20' lengths.<br />
NOTE: All gates are 3" shorter than listed length to allow<br />
for gate hardware and proper clearance. Recommended<br />
for light confinement only.<br />
6ER12<br />
6GG10<br />
Length Vertical “Z” Braces Approx. Weight Item #<br />
4' 0 18 lbs. 6GG4<br />
6' 0 26 lbs. 6GG6<br />
8' 1 35 lbs. 6GG8<br />
10' 1 43 lbs. 6GG10<br />
12' 1 51 lbs. 6GG12<br />
14' 2 60 lbs. 6GG14<br />
16' 2 68 lbs. 6GG16<br />
18'* 3 78 lbs. 6GG18<br />
20'* 3 87 lbs. 6GG20<br />
*Has 3 hinges and 3 hinge pins.<br />
tartergate.com 33
G A T E S<br />
6-BAR HEAVY-DUTY STAnDARD BUll GATE<br />
Our 6-Bar Heavy-Duty Standard Bull Gate is designed for light-to-medium confinement<br />
situations, as well as pasture and field entrances. This gate is built tough for tough<br />
situations and has been the favorite of farmers and herdsmen for years. 1-3/4" round tube<br />
made of high-tensile strength steel with superior continuous-welded saddle joints helps<br />
make this 50"-high gate so tough. This gate features vertical “z” Braces and a superior<br />
powder coat finish to ensure longer life in the field. Gates come with hinges, hinge pins<br />
and 22" snap chain. Available in lengths from 4' to 20' in red only.<br />
NOTE: Not available in galvanized. All gates are 3" shorter than listed length to allow for<br />
gate hardware and proper clearance. Recommended for light-to-medium confinement only.<br />
2" 6-BAR ExTRA-HEAVY-DUTY BUll GATE<br />
Our 6-Bar Extra-Heavy-Duty Bull Gate is designed for feedlots, large herd<br />
containment and heavy confinement situations with the quality, features and<br />
strength you have come to expect from <strong>Tarter</strong>. This 52"-high gate features<br />
vertical “z” Braces and 2" diameter round high-tensile strength steel tubing<br />
with continuous-welded saddle joints. A superior powder coat finish ensures<br />
longer life in the field. Gates come with (2) 3/4" x 12" hinge pins and heavyduty<br />
welded chain latch and are available in 4' to 20' lengths in red or green.<br />
NOTE: All 2" gates are 2-1/2" shorter than listed length to allow for gate<br />
hardware and proper clearance. Recommended for heavy confinement.<br />
34 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
6RRB12<br />
Vertical Approx.<br />
Length “Z” Braces Weight Item #<br />
4' 0 22 lbs. 6RRB4<br />
6' 1 38 lbs. 6RRB6<br />
8' 1 40 lbs. 6RRB8<br />
10' 2 48 lbs. 6RRB10<br />
12' 3 55 lbs. 6RRB12<br />
14' 3 66 lbs. 6RRB14<br />
16' 4 78 lbs. 6RRB16<br />
18'* 5 91 lbs. 6RRB18<br />
20'* 6 102 lbs. 6RRB20<br />
*Has 3 hinges and 3 hinge pins.<br />
2GG12<br />
Vertical Approx. Red Green<br />
Length “Z” Braces Weight Item # Item #<br />
4' 0 43 lbs. 2RG4 2GG4<br />
6' 1 62 lbs. 2RG6 2GG6<br />
8' 1 81 lbs. 2RG8 2GG8<br />
10' 1 99 lbs. 2RG10 2GG10<br />
12' 2 117 lbs. 2RG12 2GG12<br />
14' 2 140 lbs. 2RG14 2GG14<br />
16' 3 152 lbs. 2RG16 2GG16<br />
18'* 3 178 lbs. 2RG18 2GG18<br />
20'* 4 197 lbs. 2RG20 2GG20<br />
*Has 3 hinges and 3 hinge pins.
Individually Saddle-Welded Braces<br />
Super-Duty Hinge Pin<br />
SUPER-DUTY 2" SqUARE cORnER GATE<br />
This super-duty unit is designed for the heaviest applications. This gate is 60"<br />
high and has full saddle-welded square corners and individually saddle-welded<br />
braces. The 3/4"-diameter, super-duty hinge pin on welded, swivel-collared<br />
hinge provides the heaviest attachment on the market. The Super-Duty Square<br />
corner Gate comes with chain latch and is available in lengths from 4' to 16'.<br />
This product features our powder coat green finish for maximum corrosion<br />
resistance.<br />
2 x 4 WIRE-FIllED GATE<br />
WFGB12<br />
This heavy-duty 50"-high gate features exterior side bracing and 2 x 4 8-gauge<br />
wire. Powder coated wire keeps horses and small livestock safely inside allowing<br />
no catch points. Frame and braces are made from 1-3/4" tube that has been<br />
protected from the elements by powder coat. It comes complete with hinges,<br />
hinge pins and 22" snap chain. This gate features a superior powder coat finish<br />
to ensure longer life in the field and is available in lengths from 4' to 16'.<br />
NOTE: All gates are 3" shorter than listed length to allow for gate hardware and<br />
proper clearance. Recommended for light confinement only.<br />
G A T E S<br />
2SCGG12<br />
Length Vertical Braces Approx. Weight Item #<br />
4' 0 45 lbs. 2ScGG4<br />
6' 0 53 lbs. 2ScGG6<br />
8' 1 75 lbs. 2ScGG8<br />
10' 1 87 lbs. 2ScGG10<br />
12' 2 104 lbs. 2ScGG12<br />
14' 2 116 lbs. 2ScGG14<br />
16' 2 136 lbs. 2ScGG16<br />
18'* 3 193 lbs. 2ScGG18<br />
20'* 4 212 lbs. 2ScGG20<br />
*Special order requiring 2 week lead time.<br />
Vertical Approx. Green Gray<br />
Length Braces Weight Item # Item #<br />
4' 0 26 lbs. WFGG4 WFGGR4<br />
6' 0 35 lbs. WFGG6 WFGGR6<br />
8' 1 44 lbs. WFGG8 WFGGR8<br />
10' 1 53 lbs. WFGG10 WFGGR10<br />
12' 1 61 lbs. WFGG12 WFGGR12<br />
14' 2 72 lbs. WFGG14 WFGGR14<br />
16' 2 83 lbs. WFGG16 WFGGR16<br />
WFGG12<br />
tartergate.com 35
G A T E S<br />
GAlVAnIzED WIRE-FIllED TUBE GATE<br />
Our Galvanized Wire-Filled Tube Gate is ideal for confinement of hogs, sheep<br />
or any small animal. It is also recommended for use as an entry gate. 50"<br />
high with vertical pipe braces, this gate features 1-3/4" round high-tensile<br />
galvanized tubing with 6-gauge galvanized wire. It comes complete with<br />
hinges, hinge pins and 22" snap chain, and is available in 4' to 16' lengths.<br />
NOTE: All gates are 3" shorter than listed length to allow for gate hardware<br />
and proper clearance. Recommended for small animal confinement only.<br />
7-BAR HOG/SHEEP GATE<br />
Our 7-Bar Hog/Sheep Gate is specially designed for hogs, sheep and other small<br />
animals. Standing 35" high, this gate features 1-3/4" round high-tensile strength<br />
steel tubing with technologically superior continuous-welded saddle joints. This<br />
gate features vertical “z” Braces and the superior powder coat finish ensures<br />
longer life in the field. It comes with hinge pins and snap chain, and is available<br />
in 4' to 20' lengths in red only.<br />
NOTE: The 7-Bar Hog/Sheep Gate is recommended<br />
for small animal confinement only.<br />
36 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
WG12<br />
Length Vertical Braces Approx. Weight Item #<br />
4' 0 20 lbs. WG4<br />
6' 0 28 lbs. WG6<br />
8' 1 39 lbs. WG8<br />
10' 1 47 lbs. WG10<br />
12' 1 55 lbs. WG12<br />
14' 2 65 lbs. WG14<br />
16' 2 72 lbs. WG16<br />
RRP12<br />
Length Vertical “Z” Braces Approx. Weight Item #<br />
4'* 0 22 lbs. RRP4<br />
6'* 1 31 lbs. RRP6<br />
8'* 1 41 lbs. RRP8<br />
10'* 2 52 lbs. RRP10<br />
12'* 3 62 lbs. RRP12<br />
14'* 3 72 lbs. RRP14<br />
16'* 4 82 lbs. RRP16<br />
18'* 5 92 lbs. RRP18<br />
20'* 5 103 lbs. RRP20<br />
*Available by special order only.
2CF8 – 2" Continuous Fence 8' Panel<br />
C O N T I N U O U S F E N C I N G<br />
2CF16 – 2" Continuous Fence 16' Panel<br />
cOnTInUOUS FEncInG<br />
continuous Fence is a welded steel<br />
component type, permanent fencing.<br />
It is available in 8' and 16' panels which<br />
are joined together and secured to posts.<br />
The panels are unique to the industry as<br />
they are powder coat, using the same<br />
kind of finish used in the automotive<br />
industry, providing for long life and<br />
exceptional corrosion resistance. Each<br />
panel is designed to easily attach to the<br />
next panel by sliding the 3" reduced<br />
end into the next panel. The clips (sold<br />
separately) secure the panels to the posts.<br />
Fence clips can be welded to metal posts<br />
or screwed into wooden posts. Posts are<br />
supplied by the customer. A variety of<br />
post materials can be used. Available in<br />
powder coat gray.<br />
2CFC<br />
Fence Clips<br />
for attaching<br />
continuous fence<br />
panels to posts<br />
2CFE90<br />
2" Continuous<br />
Fence<br />
Elbow 90<br />
2CFE45<br />
2" Continuous<br />
Fence<br />
Elbow 45<br />
2CFEPM 2CFEPF<br />
2" End Posts<br />
Approx.<br />
Description Height Weight Length Item #<br />
2" continuous Fence 8' Panel 47" 60 lbs. 8' 3" 2cF8<br />
2" continuous Fence 16' Panel 47" 104 lbs. 16' 3" 2cF16<br />
2" continuous Fence End Post – Female 48" 12 lbs. 12" 2cFEPF<br />
2" continuous Fence End Post – male 48" 12 lbs. 12" 2cFEPm<br />
2" continuous Fence clips 2" 1/5 lb. 4" 2cFc<br />
2" continuous Fence Elbow 90 2" 1 lb. 25-3/4" 2cFE90<br />
2" continuous Fence Elbow 45 2" 1 lb. 25-3/4" 2cFE45<br />
tartergate.com 37
C O R R A L P A N E L S<br />
6-BAR EcOnOmY cORRAl PAnEl<br />
Our 6-Bar Economy corral Panels are built with the same high quality and<br />
strength as our gates. light but strong, these panels are ideal for light<br />
confinement and are portable for travel to overnight shows or trail rides. 60" high<br />
with vertical “z” Braces, these panels are built from 1-3/4" round high-tensile<br />
strength steel tubing with superior continuous-welded saddle joints. A superior<br />
powder coat finish ensures longer life in the field, and the quick pin-latch system<br />
makes for easy hookup. custom loop legs prevent sinking, and panels hook up<br />
easily to our Walk-Thru Arch Gate. Available in 6' to 16' lengths in red or green.<br />
NOTE: Recommended for light confinement.<br />
38 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
cORRAl PEn cAlcUlATOR<br />
1) To find the number of panels needed, multiply the desired diameter (straight line passing through the<br />
center of the circle) by 3.14. This will determine the circumference (the distance around the circle).<br />
2) Divide the circumference by the length of panels being used. This will equal the number of panels needed.<br />
Panel Length 20'<br />
Diameter of Holding Area (Feet)<br />
25' 30' 35' 40' 45' 50' 55' 60' 65' 70' 75' 80' 85' 90' 95' 100'<br />
10' 6 8 9 11 13 14 16 17 19 20 22 24 25 27 28 30 31<br />
12' 5 7 8 9 10 12 13 14 15 16 18 20 21 22 24 25 26<br />
16' 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20<br />
NOTES: Sizes of pens are approximate. Pen sizes will vary depending on the size of the Walk-Thru Arch Gate<br />
used. Walk-Thru Arch Gates are available in 4'-12' lengths. Walk-Thru Arch Gates with Panels are available in<br />
10' and 12' lengths for a more rigid entry.<br />
OUR BEST-SELLING PRODUCT!<br />
ECR12<br />
Vertical Approx. Red Green<br />
Length “Z” Braces Weight Item # Item #<br />
6' 1 36 lbs. EcR6 EcG6T<br />
8' 1 40 lbs. EcR8 EcG8T<br />
10' 1 52 lbs. EcR10 EcG10T<br />
12' 2 58 lbs. EcR12 EcG12T<br />
14' 2 65 lbs. EcR14 EcG14T<br />
16' 3 72 lbs. EcR16 EcG16T
6-BAR EcOnOmY<br />
GAlVAnIzED cORRAl PAnEl<br />
Our 6-Bar Economy Galvanized corral<br />
Panel is built with the same quality and<br />
strength as our gates. light but strong,<br />
these panels are ideal for light confinement<br />
and are portable for travel to overnight<br />
shows and trail rides. 60" high with vertical<br />
“z” Braces, these panels are built from 1-3/4"<br />
rounded high-tensile strength steel tubing<br />
with superior continuous welded saddle<br />
joints. custom loop legs prevent sinking,<br />
and panels hook up easily to our Walk-Thru<br />
Arch Gate. Equipped with a quick pin-latch<br />
system, these panels are available in 10',<br />
12' and 16' lengths.<br />
NOTE: Recommended for light confinement.<br />
6-BAR HEAVY-DUTY<br />
STAnDARD cORRAl PAnEl<br />
Our 6-Bar Heavy-Duty Standard corral<br />
Panels are built with the same quality and<br />
strength as our Heavy-Duty Standard Bull<br />
Gate. This corral panel is ideal for the<br />
light-to-medium confinement of livestock<br />
in round pens and working areas. 60" high<br />
with vertical “z” Braces, this panel features<br />
high-tensile strength steel tubing with<br />
superior continuous-welded saddle joints.<br />
A superior powder coat finish ensures a<br />
longer life in the field while custom loop<br />
legs prevent sinking into the ground. It<br />
hooks easily to our Walk-Thru Arch Gate<br />
as well as other panels, thanks to its quick<br />
pin-latch system. These 1-3/4" round tube<br />
panels are available in red in lengths from<br />
6' to 20'.<br />
NOTE: Not available in galvanized.<br />
Recommended for light-to-medium<br />
confinement.<br />
2" 6-BAR ExTRA-HEAVY-DUTY<br />
cORRAl PAnEl<br />
Our 6-Bar Extra-Heavy-Duty corral Panel<br />
is designed for containment in crowding<br />
areas such as feedlots and working pens,<br />
and has the quality features and strength<br />
you’ve come to expect from <strong>Tarter</strong>.<br />
62" high with vertical “z” Braces, this<br />
panel features 2" round high-tensile<br />
strength steel tubing with superior<br />
continuous-welded saddle joints. The<br />
superior powder coat finish ensures a<br />
longer life in the field while custom loop<br />
legs prevent sinking into the ground. It<br />
hooks easily to our Walk-Thru Arch Gate<br />
as well as other panels, thanks to its quick<br />
pin-latch system. 8' to 16' lengths are<br />
available in green.<br />
NOTE: Recommended for heavy confinement.<br />
Vertical Approx.<br />
Length “Z” Braces Weight Item #<br />
6' 1 39 lbs. RRc6<br />
8' 1 45 lbs. RRc8<br />
10' 2 54 lbs. RRc10<br />
12' 3 62 lbs. RRc12<br />
C O R R A L P A N E L S<br />
Length Vertical “Z” Braces Approx. Weight Item #<br />
10' 1 52 lbs. 6Gc10<br />
12' 2 58 lbs. 6Gc12<br />
16' 2 72 lbs. 6Gc16<br />
Vertical Approx.<br />
Length “Z” Braces Weight Item #<br />
14' 3 78 lbs. RRc14<br />
16' 4 84 lbs. RRc16<br />
18'* 5 92 lbs. RRc18<br />
20'* 6 102 lbs. RRc20<br />
*Available by special order only.<br />
Length Vertical “Z” Braces Approx. Weight Item #<br />
8' 1 82 lbs. 2Gc8<br />
10' 1 100 lbs. 2Gc10<br />
12' 2 118 lbs. 2Gc12<br />
14'* 2 141 lbs. 2Gc14<br />
16' 3 153 lbs. 2Gc16<br />
*Available by special order only.<br />
RRC12<br />
2GC12<br />
6GC12<br />
tartergate.com 39
C O R R A L P A N E L S<br />
EcOnOmY PIPE PAnElS<br />
This Pipe Panel has been designed as an enclosure for small animals including goats, sheep or<br />
hogs. Each panel features a female and a male connection point so that multiple panels quickly<br />
and easily attach to form round or square pens, runways or other configurations. Available in<br />
4' and 8' lengths, the durable red powder coat finish ensures a longer life in the field. We also<br />
offer a Walk-Thru Arch Gate for even more versatility. Available in red 1-1/4" steel tubing, this<br />
panel is lightweight and should be used for small animal confinement only.<br />
NOTE: Recommended for small animal confinement only.<br />
Description Item # Height Approx. Weight<br />
4' Pipe Panel w/Hardware PPWR4 36" 15 lbs.<br />
8' Pipe Panel w/Hardware PPWR8 36" 24 lbs.<br />
4' Pipe Panel Walk-Thru Arch Gate PPWTR4 74" 23 lbs.<br />
40 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
PPWR8 PPWTR4<br />
cORRAl PAnEl cARRIER<br />
This corral carrier makes transporting corrals or<br />
gates a breeze, and is perfect for moving gates<br />
and panels to different locations. This heavy-duty<br />
unit features a sturdy box-frame construction<br />
and a super-duty axle. Adjustable uprights<br />
allow for hanging different lengths and load<br />
balancing. The new heavy-duty implement tires<br />
are protected by a vertical interior guard that<br />
keeps panels away from tires. The corral carrier<br />
will easily hold 30 of our 1-3/4" corrals, and 26 of<br />
our 2" corrals. This unit comes with a fixed stand<br />
under the tongue, a heavy-duty hitch pin, and<br />
features our durable red powder coat finish.<br />
Description Item #<br />
Approx.<br />
Weight Height Length Width<br />
corral Panel carrier cORcAR 460 lbs. 85-5/8" 164-1/2" 83-1/4"
WAlk-THRU ARcH GATES<br />
EWR4<br />
6GW4<br />
Our Walk-Thru Arch Gates complement our<br />
portable corral Panels and provide ease of<br />
access for both livestock and herdsmen.<br />
These walk-thrus feature a variety of<br />
lengths with an 8' arch, which makes it easy<br />
for trailers, wagons and large equipment<br />
to pass. The superior powder coat finish<br />
ensures a longer life in the field, and the<br />
quick pin-latch system ensures a quick, yet<br />
secure, hookup for your corral pen. The<br />
gate also features a chain latch. In addition<br />
to our painted models, we also offer the<br />
galvanized in 4' and 6' lengths. They are<br />
available in a wide range of constructed<br />
tubing including round 1-3/4" and round<br />
2" in a variety of colors and weights.<br />
W A L K - T H R U S<br />
Economy 1-3/4" Round Tube<br />
Length Red Item # Green Item # Approx. Weight Galvanized Item # Approx. Weight<br />
4' EWR4 EWG4T 45 lbs. 6GW4 48 lbs.<br />
6' EWR6 EWG6T 68 lbs. 6GW6 70 lbs.<br />
8' EWR8 ––– 90 lbs. ––– –––<br />
10' EWR10 ––– 112 lbs. ––– –––<br />
12' EWR12 ––– 135 lbs. ––– –––<br />
Heavy-Duty 1-3/4" Round Tube<br />
Length Red Item # Approx. Weight<br />
4' RRW4 53 lbs.<br />
6' RRW6 80 lbs.<br />
EWG6T<br />
Extra-Heavy-Duty 2" Round Tube<br />
Length Red Item # Green Item # Approx. Weight<br />
4' 2WR4 2WG4 76 lbs.<br />
6' 2WR6 2WG6 114 lbs.<br />
8' ––– 2WG8 152 lbs.<br />
10' ––– 2WG10 190 lbs.<br />
tartergate.com 41
W A L K - T H R U S<br />
42 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
EWR64<br />
6GW84<br />
EWG64T
FEncE lInE FEEDER PAnEl<br />
Our Fence line Feeder Panels are designed for feeding square-bale,<br />
loose hay or silage in the pasture fence line or corner. They can<br />
also be used in barns or sheds for easy feeding. 50" high, these<br />
feeder panels are available in 2" tubing in powder coat green.<br />
These panels are also great for constructing your own square bale<br />
feeders of various sizes, with S-bar openings and quick pin hookup.<br />
The superior powder coat finish ensures longer life in the field, and<br />
the S-bar design helps prevent calves from getting inside. 4' to 16'<br />
lengths are available with or without the hay-saver metal panel.<br />
NOTE: All panels come with quick pin hookup and are not<br />
available in galvanized.<br />
WAlk-THRU ARcH GATES WITH PAnEl<br />
F E E D E R P A N E L S<br />
2FSG8<br />
2" Panel Without Saver 2" Panel With Saver<br />
Length Item # Approx. Weight Item # Approx. Weight<br />
4'* 2FSG4 32 lbs. 2FSWG4 38 lbs.<br />
6' 2FSG6 48 lbs. 2FSWG6 57 lbs.<br />
8'* 2FSG8 64 lbs. 2FSWG8 76 lbs.<br />
10' 2FSG10 83 lbs. 2FSWG10 97 lbs.<br />
12' 2FSG12 96 lbs. 2FSWG12 114 lbs.<br />
14'* 2FSG14 112 lbs. 2FSWG14 133 lbs.<br />
16' 2FSG16 128 lbs. 2FSWG16 152 lbs.<br />
*Available by special order only.<br />
Our Walk-Thru Arch Gate with welded corral Panel is built to stand rigid for ease of opening and closing when handling livestock.<br />
All of our panel-attached Walk-Thru Arch Gates stand 8' high for easy clearance and are available in 4' or 6' lengths. The corral<br />
Panel attachments are available in 6' or 8' lengths. Both our economy and heavy-duty versions feature 6-bar, 1-3/4" round tubing<br />
and stand 60" high. The economy is available in red, green and galvanized. The heavy-duty is available in red only. The extra-heavyduty<br />
version features 6-bar 2" round tubing and stands 62" high. It is available in green only. The superior powder coat finish<br />
ensures a longer life in the field.<br />
Economy 1-3/4" Round Tube<br />
Length Red Item # Green Item # Approx. Weight Galvanized Item # Approx. Weight<br />
6' Panel w/4' Gate EWR64 EWG64T 71 lbs. 6GW64 72 lbs.<br />
8' Panel w/4' Gate EWR84 EWG84T 86 lbs. 6GW84 88 lbs.<br />
6' Panel w/6' Gate EWR66 EWG66T 90 lbs. ––– –––<br />
Heavy-Duty 1-3/4" Round Tube<br />
Length Red Item # Approx. Weight<br />
6' Panel w /4' Gate RRW64 77 lbs.<br />
8' Panel w /4' Gate RRW84 92 lbs.<br />
6' Panel w /6' Gate RRW66 96 lbs.<br />
Extra-Heavy-Duty 2" Round Tube<br />
Length Green Item # Approx. Weight<br />
6' Panel w/4' Gate 2WG64 122 lbs.<br />
8' Panel w/4' Gate 2WG84 162 lbs.<br />
tartergate.com 43
H A Y F E E D E R S<br />
3-PIEcE HEAVY-DUTY S-BAR HAY FEEDER<br />
Our 3-Piece Heavy-Duty S-Bar Hay Feeder is our most proven and solid design. The 3-piece<br />
construction makes for easy assembly. 8' in diameter and 45" high, this feeder features 1-3/4" round<br />
tubular steel, horizontal rails and vertical S-bars. The S-bar design helps prevent calves from getting<br />
inside and the heavy-duty end post brace provides superior strength and easy assembly. Available with<br />
or without the 17" metal hay-saver panel, the superior powder coat finish ensures longer life in the<br />
field. This feeder comes in powder coat red.<br />
NOTE: All hay feeders come complete with bolts and nuts.<br />
Recommended for tough situations. Not recommended for horses.<br />
Description Item # Approx. Weight<br />
8' 3-Pc. HD S-Bar Hay Feeder RF 120 lbs.<br />
8' 3-Pc. HD S-Bar Hay Feeder w/metal RFm 180 lbs.<br />
For our complete line of Equine Round Bale Hay Feeders, please see the Equine <strong>Equipment</strong> section, page 20.<br />
44 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
RF<br />
RFM
2-PIEcE ExTRA-HEAVY-DUTY SlAnT-BAR HAY FEEDER<br />
H A Y F E E D E R S<br />
14G20<br />
The <strong>Tarter</strong> 2-Piece Extra-Heavy-Duty Feeder has long been a favorite of the serious cattleman. This<br />
feeder is 8' in diameter, 45" high and features 1-7/8" flat oval rails and 1-1/2" round slats. These slats<br />
are welded on the outside for extra strength. It also features a super-duty round end post brace with<br />
3 bolt connections for superior strength and rock-solid assembly.<br />
NOTE: Not available in galvanized. Recommended for toughest situations. Not recommended for horses.<br />
Description Item # Approx. Weight<br />
2-Pc. Extra HD Slant-Bar Hay Feeder 14G20 179 lbs.<br />
3-PIEcE ExTRA-HEAVY-DUTY BUll HAY FEEDER<br />
This 3-Piece Extra-Heavy-Duty Bull Hay Feeder has been designed by and for the serious cattleman. It is the heaviest<br />
and most durable Hay Feeder in the <strong>Tarter</strong> line of quality feeders. This feeder is 8' 6" in diameter and 54" high.<br />
Super-duty end post brace with 3 bolt connections provide strength and rock-solid assembly. The extra-tall 24" metal<br />
saver is the heaviest and tallest metal hay-saver in the industry and is made for feeding of large animals, and can also<br />
accommodate silage feeding. It features heavy-duty slant bars that are welded on the outside for superior strength and<br />
durability. The superior powder coat finish ensures long life in the field. Available in powder coat red only.<br />
NOTE: Not available in galvanized. Recommended for toughest situations. Not recommended for horses.<br />
Description Item # Approx. Weight<br />
3-Pc. Extra HD Bull Hay Feeder RBF 239 lbs.<br />
RBF<br />
tartergate.com 45
The Valu-line Series features lightweight price performers that are perfect for any light-duty needs. They<br />
include straight end-post construction and durable powder coat finish for long life in the field. All welds are<br />
continuous-welded saddle joints constructed with 1-1/2" tubing. They are easy to handle, maneuver and afford.<br />
VAlU-lInE 8' BUnk FEEDER<br />
46 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
This lightweight, versatile Bunk Feeder is 8' in length, features our<br />
one-piece poly liner and is constructed of 1-1/2" tubing. This price<br />
performer can help you achieve your light feeding chores for less.<br />
Description Item # Approx. Weight<br />
Valu-line 8' Bunk Feeder VlBFGR8 49 lbs.<br />
VAlU-lInE 3-PIEcE ROUnD BAlE FEEDER<br />
The Valu-line 3-Piece Round Bale Feeder is a lightweight performer<br />
for all your hay feeding needs. light but durable, it is easy to assemble<br />
and features our slant bar design. This feeder is 8' in diameter, 45" high<br />
and is made exclusively of 1-1/2" tubular steel. It features our durable<br />
powder coat finish for strong corrosion resistance.<br />
Description Item # Approx. Weight<br />
Valu-line 3-Pc. Round Bale Feeder VlRBFGR 99 lbs.<br />
OUR BIGGEST VALUE YET!<br />
VLBFGR8<br />
VLRBFGR
VAlU-lInE 5-BAR 12' GATE<br />
Perfect for light-duty needs, the Valu-line Gate is 12' in length and 50" tall, featuring continuous-welded<br />
saddle joints and our proven “z” Brace design. It ships with hinges and is ready to install.<br />
VAlU-lInE 5-BAR 6' WAlk-THRU<br />
The Valu-line 5-Bar Walk-Thru is 6' wide<br />
and features a double-brace bow design.<br />
The gate has a chain and latch with a<br />
bow that connects to the corral with our<br />
drop-pin hookup system.<br />
VLWGR6<br />
Description Item # Approx. Weight Length<br />
Valu-line 5-Bar 12' Gate VlGGR12 34 lbs. 12'<br />
Valu-line 5-Bar 6' Walk-Thru VlWGR6 45 lbs. 6'<br />
Valu-line 5-Bar 12' corral Panel VlcGR12 44 lbs. 12'<br />
VAlU-lInE 5-BAR 12' cORRAl PAnEl<br />
VLGGR12<br />
The 5-Bar corral Panel is 12' in length and 62" high with vertical “z” Braces. The unique<br />
drop-pin hookup makes setup quick and easy. It features loop legs to prevent sinking.<br />
VLCGR12<br />
tartergate.com 47
G A T E A C C E S S O R I E S<br />
Gate Rack<br />
Our Portable Gate Rack is designed for farm supply dealers as well as the large herdsman<br />
who needs off-the-ground storage of gates and corral panels. double-deck design allows for<br />
the easy storage of more gates in a small space. this rack is easy to unload or load by hand<br />
or forklift and is constructed from 3" steel channel. Hardware and assembly instructions<br />
included. available in powder coat gray only.<br />
Approx. Arm Length Gate<br />
Description Item # Weight Height Length Width (4 Arms) Capacity<br />
Gate Rack GR 220 lbs. 121" 80" 50-1/2" 25" 50<br />
48 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Gate Stand<br />
this easy-to-use stand puts the product upright and in<br />
position so the customer can easily visualize several gates<br />
in use. these Gate Stands are available in three different<br />
configurations of 6, 10 and 14 rod stands. By setting<br />
gates on and between the rods, you can hold double the<br />
number of gates. these stands are available in powder<br />
coat red only.<br />
Approx.<br />
Description Item # Weight Height Length Width<br />
6 Bar 6BGS 21 lbs. 8-1/4" 27" 6"<br />
10 Bar 10BGS 36 lbs. 8-1/4" 43" 6"<br />
14 Bar 14BGS 50 lbs. 8-1/4" 59" 6"<br />
<strong>Tarter</strong> Tube’s three tube mills produce<br />
more than 17,000 miles of round tube<br />
each year, each length prepared for<br />
the next manufacturing step.
HEAVY-DUTY mInERAl FEEDER<br />
Our Heavy-Duty mineral Feeder is the best-selling mineral feeder on<br />
the market because of its superior design and quality workmanship.<br />
Rough and rugged, our Heavy-Duty mineral Feeder will serve you<br />
well for years. This feeder features a rotating 15" poly wind vane<br />
head with dual ball bearings, a large rotating 2-cubic-foot-capacity<br />
heavy poly tub and a 46"-diameter base built with solid 3/4" steel<br />
rods to prevent tipping. Available in red only.<br />
NO ASSEMBLY<br />
REQUIRED!<br />
ASSEMBLES IN<br />
MINUTES!<br />
Assembled Approx.<br />
Description Item # Height Weight<br />
Heavy-Duty mineral Feeder mF 59" 58 lbs.<br />
STAnDARD mInERAl FEEDER<br />
Our Standard mineral Feeder is made with the same quality and<br />
features as our heavy-duty model but requires no assembly.<br />
custom built with 1-1/2" round tubular steel, this feeder is sturdy<br />
enough to easily withstand the elements. Featuring a rotating<br />
1/4"-thick poly tub, protective molded wind vane, heavy-duty<br />
roller bearing and 46"-diameter base of a 5/8" steel rod to resist<br />
tipping, it is available in red only.<br />
Assembled Approx.<br />
Description Item # Height Weight<br />
Standard mineral Feeder SmF 46-1/2" 38 lbs.<br />
M I N E R A L F E E D E R S<br />
BUll mInERAl FEEDER<br />
This heavy-duty, 3-compartment poly feeder stands up to the<br />
most difficult environmental conditions. Each compartment holds<br />
approximately 6 gallons of water or feed. Total wet volume is<br />
108-120 lbs. Total dry volume is approximately 144 lbs. Standing<br />
7" high, this 30"-diameter tub is heavy enough to withstand<br />
animals and the elements but light enough to move to nearly any<br />
location. convenient anchoring holes make it easy to secure the<br />
Bull mineral Feeder to the ground, preventing animals from moving<br />
it. The weatherproof poly lid protects the contents of the entire<br />
feeder. Resistant to impact as well as heat and cold, this feeder<br />
presents smooth edges for safety to both people and animals.<br />
This product is lightweight and can be shipped by UPS or FedEx.<br />
Description Item #<br />
Approx.<br />
Weight Height Diameter<br />
Bull mineral Feeder SBmF 17 lbs. 7" 30" inside<br />
36" lid<br />
tartergate.com 49
B U N K F E E D E R S<br />
5' OR 10' 1-PIEcE HEAVY-DUTY BUnk FEEDER<br />
Our 1-Piece Heavy-Duty Bunk Feeder is the industry leader in design and quality. The replaceable bunk liner is formed in a<br />
single piece from 100% recycled materials with no seams or inserts and is built rugged to withstand abuse from small or large<br />
herds. The welded frame is made from 1-3/4" diameter round tubular steel. Available in 5' or 10' lengths in red frames, the<br />
feeder is 27" wide. You can also add a 5' or 10' galvanized hay rack for even more versatility.<br />
5' OR 10' 1-PIEcE HEAVY-DUTY BUnk FEEDER GAlVAnIzED<br />
50 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
1PB10<br />
1PGB10<br />
Our 1-Piece Heavy-Duty Bunk Feeder with Galvanized Frame is the industry leader in design and quality. The replaceable bunk<br />
liner is formed from a single solid piece of 100% recycled materials, 10" deep x 25" wide with weep holes for drainage. It is<br />
built rugged to withstand abuse from any size herd. Featuring a superior welded frame of 1-3/4" diameter galvanized steel<br />
this feeder is available in 5' or 10' lengths and is 27" wide. Also available with an optional 5' or 10' hay rack.
5' OR 10' HAY RAck<br />
Optional Hay Rack loaded<br />
with features:<br />
• Heavy-duty galvanized steel<br />
• V-style for easy loading and<br />
animal access<br />
• Bolts easily onto your feeder for<br />
quick assembly<br />
• keeps hay accessible and clean<br />
B U N K F E E D E R S<br />
1PGB5 Feeder<br />
Shown with HR5<br />
Optional Hay Rack<br />
Red Galvanized Approx. Black Approx.<br />
Description Item # Item # Weight Item # Weight<br />
5' 1-Pc. Poly Bunk Feeder 1PB5 1PGB5 38 lbs. ––– –––<br />
5' Hay Rack ––– HR5 48 lbs. ––– –––<br />
5' 1-Pc. Poly Bunk Feeder liner ––– ––– ––– 1PBl5 6 lbs.<br />
10' 1-Pc. Poly Bunk Feeder 1PB10 1PGB10 65 lbs. ––– –––<br />
10' Hay Rack ––– HR10 68 lbs. ––– –––<br />
10' 1-Pc. Poly Bunk Feeder liner ––– ––– ––– 1PBl10 8 lbs.<br />
10' mETAl GRAIn FEEDER<br />
The heaviest bunk feeder on the market, this tough<br />
metal Grain Feeder is constructed of 14-gauge steel with<br />
heavy-duty legs. The tapered bottom provides for easy flow and holes<br />
drilled in the bottom of each end provide for drainage. Pre-drilled holes<br />
on each end of the feeder allow for multiple feeders to be joined together for<br />
continuous bunks. The units are fully stackable. Available in powder coat gray only.<br />
Description Item # Approx. Weight Height Width<br />
10' metal Grain Feeder mGF 170 lbs. 21" 28"<br />
For our complete line of Equine Bunk Feeders, please see the Equine <strong>Equipment</strong> section, page 22.<br />
tartergate.com 51
C A T T L E - H A N D L I N G E Q U I P M E N T<br />
It’s your empire. And your domain requires quality.<br />
<strong>Tarter</strong> Cattle-Handling <strong>Equipment</strong> is made for the rancher with<br />
small-to-medium herds who requires heavy-duty construction<br />
that lasts and all the accessories needed to keep it growing.<br />
Squeeze Chutes ....................... 53-57<br />
Headgates ................................... 58<br />
Alley and Sweep Systems ......... 59-62<br />
Stock Tanks .................................. 63<br />
Tanks and Waterers ................. 64-65<br />
Earth Tube ................................... 65<br />
Tank Accessories .......................... 66<br />
52 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
S Q U E E Z E C H U T E S<br />
Cattlemaster with<br />
Automatic<br />
Headgate – CMSCA<br />
cATTlEmASTER HEAVY-DUTY SqUEEzE cHUTE<br />
The cattlemaster is designed with the professional rancher in mind.<br />
Our heavy-duty, all-steel welded construction provides a lifetime of<br />
consistent operation, making the handling of cattle much easier. We<br />
have engineered our line of modular cattle-handling equipment to allow<br />
the rancher every option as far as the optimum setup for his ranch.<br />
This chute is available with either a manual or automatic headgate. Our<br />
products feature ease of assembly and ease of adjustment as well as our<br />
durable powder coated finish. Our goal with this and all of our fine line<br />
of agricultural products is to provide products that are durable, reliable<br />
and can be depended on to perform every function every time. We have<br />
taken ergonomic factors into account to see to it that the controls are<br />
located in the optimum location for ease of single-operator use.<br />
tartergate.com 53
S Q U E E Z E C H U T E S<br />
Description Item # Height Approx. Weight Width Length<br />
cattlemaster Squeeze chute cmScA 82" 1,380 lbs. 45" 95"<br />
w/Automatic Headgate<br />
cattlemaster Squeeze chute cmScm 82" 1,372 lbs. 48" 95"<br />
w/manual Headgate<br />
OPTIOnAl PAlPATIOn cAGE<br />
54 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
CaTTlemasTeR<br />
HEAVY-DUTY SqUEEzE cHUTE . . .<br />
• configured to fit both the cattlemaster and cattleman chutes<br />
• High-sheeted doors with heavy square tubing to block animal views<br />
• Features dual-access doors from each side with heavy-duty, spring-loaded slam latches<br />
• Both doors open into alley and latch, forming a protective barrier from the animals in the alley<br />
• Easy-adjusting, movable hookups for ease of attachment to chute and alley<br />
• Grease fittings on all pivot points<br />
• Durable powder coat finish<br />
Cattlemaster Squeeze<br />
Chute with Automatic<br />
Headgate – CMSCA<br />
SPC
. . . DESIGnED WITH THE PROFESSIOnAl RAncHER In mInD<br />
• Heavy-duty, all-steel welded construction<br />
• modular design allows easy addition of optional accessories<br />
such as palpation cage, tailgates and alleyways<br />
• Available with manual or<br />
automatic headgate<br />
• Easily adjusts to various<br />
cattle sizes/breeds<br />
• User-friendly ergonomic design<br />
• Single-lever squeeze mechanism<br />
• 6 drop-down sides for easy<br />
pinpoint access<br />
• Bottom panel folds down or<br />
removes completely<br />
• Side exit door for larger animal exit<br />
• Sliding vertical tailgate with stop<br />
• Bottom adjustments with multiple<br />
settings for various size animals<br />
• Durable powder coat finish<br />
in red only<br />
Cattlemaster Squeeze<br />
Chute with Manual<br />
Headgate – CMSCM<br />
Optional Split Tailgate – STG<br />
S Q U E E Z E C H U T E S<br />
CMSCM<br />
Description Item # Height Approx. Weight Width Length<br />
Standard Palpation cage SPc 78" 185 lbs. 32" 32"<br />
Wheel kit Only Wk 40" 260 lbs. 6' 5" 13'<br />
Split Tailgate STG 86" 228 lbs. 55-1/2" 13'<br />
• Sliding split tailgate can be used as an alternative to vertical tailgate<br />
• Single lever pull action with lockback handle<br />
• Adjustable to fit on back of chute or on back of palpation cage<br />
• Fits cattlemaster chute or the Standard Palpation cage<br />
tartergate.com 55
S Q U E E Z E C H U T E S<br />
CaTTleman<br />
Description Item # Height Approx. Weight Width Length<br />
cattleman chute w/Automatic Headgate ccA 80" 995 lbs. 45" 108"<br />
cattleman chute w/manual Headgate ccm 80" 995 lbs. 45" 108"<br />
Standard Palpation cage SPc 78" 185 lbs. 32" 32"<br />
Wheel kit Only Wk 40" 260 lbs. 6' 5" 13'<br />
56 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
WK<br />
NEW <strong>AND</strong><br />
IMPROVED!<br />
WHEEl kIT<br />
• configured to fit both the cattlemaster and<br />
cattleman chutes<br />
• Provides easy loading of both the cattlemaster<br />
and cattleman chutes for transport<br />
• Fully assembled including new tires, rims, and<br />
heavy-duty, 2-way winch<br />
• Durable powder coat red finish<br />
Cattleman<br />
with Automatic<br />
Headgate – CCA<br />
CCA
cATTlEmAn STAnDARD SqUEEzE cHUTE<br />
• Features a single-lever, double-sided squeeze mechanism with<br />
heavy-duty linkage<br />
• Heavy-duty squeeze lever for improved ergonomics, ease of use,<br />
and safety<br />
• Drop-down horseshoes for easy top-side access, as well as the fold-down<br />
and fully-removable bottom panels<br />
• Spring-loaded side exit door for larger animals to exit and for sorting<br />
• Scale-ready and equipped to handle various load bar configurations<br />
Cattleman<br />
with Manual<br />
Headgate<br />
– CCM<br />
CCM<br />
S Q U E E Z E C H U T E S<br />
• Rear vertical sliding tailgate with automatic locking that locks it in<br />
both the closed and fully open positions with safety stop at top<br />
• Rear tailgate release and side door release feature durable triangular<br />
pull handles hooked to pulleys at pivot points for ease of operation<br />
and durability<br />
• Grease fittings on all major pivot points<br />
• Entire unit is powder coated for corrosion resistance<br />
and long life in the field<br />
tartergate.com 57
H E A D G A T E S<br />
HEAVY-DUTY<br />
cATTlEmASTER<br />
AUTOmATIc HEADGATE<br />
• Perfect for<br />
medium-to-large herds<br />
• Operated smoothly by<br />
single operator<br />
• Adjusts from calves to bulls<br />
• Grease fittings at critical points<br />
• Positive latching with in/out<br />
rotating door<br />
• Reversible controls allow<br />
it to be operated from<br />
either side<br />
• Adjustable bottom to<br />
accommodate various<br />
animal sizes<br />
• constructed of quality,<br />
heavy-duty 2-3/8" tubular steel<br />
• Overhead bar prevents accidental release of automatic headgate<br />
• Sold separately or with cattlemaster chute<br />
• Available in powder coat red only for superior corrosion protection<br />
mEDIUm-DUTY<br />
cATTlEmAn<br />
AUTOmATIc HEADGATE<br />
• Ideal for the small herd<br />
• Single-person operated<br />
• Works with cattleman chute<br />
• can be bolted to wooden alley<br />
posts if desired<br />
• Grease fittings at critical points<br />
• Single-piece top linkage for<br />
smooth operation<br />
• quality constructed of<br />
heavy-duty 2" tubular steel<br />
• Sold separately or with<br />
cattleman chute<br />
• Available in powder coat red only<br />
for superior corrosion protection<br />
58 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
HeaVY-DUTY<br />
cATTlEmASTER<br />
mAnUAl<br />
HEADGATE<br />
• Perfect for<br />
medium-to-large<br />
herds<br />
• Superior “catch-ability”<br />
of a manual chute<br />
• Heaviest and most<br />
proven for any size<br />
animal<br />
• Grease fittings at<br />
critical points<br />
• constructed of<br />
quality, heavy-duty<br />
2-3/8" tubular steel<br />
• Sold separately or<br />
with cattlemaster<br />
chute<br />
All headgates feature our durable powder coat finish.<br />
meDiUm-DUTY<br />
• Available in powder<br />
coat red only for superior corrosion protection<br />
cATTlEmAn<br />
mAnUAl<br />
HEADGATE<br />
• Superior “catch-ability”<br />
of a manual chute<br />
• Ideal for any size herd<br />
• Works with<br />
cattleman chute<br />
• can be bolted to wooden<br />
alley posts if desired<br />
• Works with animals<br />
of all sizes<br />
• Sold separately or<br />
with cattleman chute<br />
• Available in powder coat<br />
red only for superior<br />
corrosion protection<br />
Description Item # Height Approx. Weight Mounting Bolt Width Total Width Length<br />
cattlemaster Auto Headgate cmAH 79" 360 lbs. 42-1/2" 45" 12"<br />
cattlemaster manual Headgate cmmH 75" 248 lbs. 37-1/2" 53" 8"<br />
cattleman Auto Headgate cAH 72" 220 lbs. 37-1/2" 42" 18"<br />
cattleman manual Headgate cmH 77" 200 lbs. 37-1/2" 57-1/2" 8"
A L L E Y A N D S W E E P S Y S T E M S<br />
The entire system ships complete on a single pallet, whether sheeted or open-sided, and<br />
assembles quickly and easily, with no tools required (unless sweep gate latch is reversed).<br />
TArTEr – THE rULE<br />
oN ALLEY <strong>AND</strong> SWEEP SYSTEMS!<br />
When <strong>Tarter</strong> designers set out to make the best and most versatile system on the market, they started with several clear objectives.<br />
Make it rugged, make it versatile, make it easy to assemble and use, make it affordable, and make it work every single time.<br />
The result? An alley and sweep system like no other on the market.<br />
And now these units dominate the market!<br />
tartergate.com 59
A L L E Y A N D S W E E P S Y S T E M S<br />
Sheeted Sweep System 180 x 20<br />
Shown with Cattlemaster Squeeze Chute,<br />
sold separately.<br />
Left-<br />
Hand<br />
Inside<br />
Controls<br />
Left-<br />
Hand<br />
Outside<br />
Controls<br />
Straight<br />
Lead-in<br />
Units<br />
Left-<br />
Hand<br />
Inside<br />
Controls<br />
Both the open and sheeted systems are fully reversible and can be configured in 6<br />
different setups. Straight lead-in setups include a 10' alley. For a 20' alley on a straight<br />
lead-in configuration, one additional alley panel and one additional bow must be purchased.<br />
Open-Sided Sweep System 180 x 20<br />
Shown with Cattlemaster Squeeze Chute,<br />
sold separately.<br />
Straight<br />
Lead-in<br />
Units<br />
Right-<br />
Hand<br />
Inside<br />
Controls<br />
60 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Right-<br />
Hand<br />
Inside<br />
Controls<br />
Right-<br />
Hand<br />
Outside<br />
Controls<br />
SIX<br />
REASONS<br />
to INSIST<br />
ON TARTER<br />
CATTLE-H<strong>AND</strong>LING<br />
<strong>EQUIPMENT</strong><br />
1<br />
2<br />
3<br />
4 5<br />
6<br />
Both open and sheeted units<br />
ship complete on a single pallet<br />
that includes all components<br />
and easy-to-use, picture-based<br />
assembly instructions. This means<br />
easy shipping to the store and easy<br />
transport to the farm after purchase.<br />
No tools required, unless sweep<br />
gate latch is reversed. Assembly<br />
is simple. The complete unit can be<br />
set up in 6 different configurations,<br />
putting the controls where you want<br />
them, in less than an hour.<br />
Every unit is pre-assembled at the<br />
factory prior to shipping. Everything<br />
fits the way it is supposed to. nothing<br />
is missing. nothing is broken. That’s why<br />
we can guarantee smooth assembly and<br />
operation each and every time.<br />
Each tub has 3 full bows to hold<br />
the sweep tub in place – this means<br />
no shifting or moving of any tub<br />
panels regardless of the load.<br />
A fully adjustable alleyway on all<br />
units allows working animals of<br />
any size. These are versatile systems,<br />
designed for a wide range of species,<br />
sizes and ages. The alleyway rolls on<br />
a smooth but tough roller system.<br />
large alley adjustment handles make<br />
adjustment easy in 3" increments from<br />
13" to 31". Interchangeable first bow<br />
at chute connection points make for<br />
clean and easy connections to either the<br />
cattlemaster or cattleman chutes.<br />
Value pricing offers a heavy-duty<br />
system at a lightweight price. All<br />
sweep and alley systems are 14-gauge<br />
or heavier. The 7-bar design on both<br />
the open and sheeted unit is heavier<br />
and more rigid than any on the market.<br />
You simply get more cattle-handling<br />
capacity, versatility and simplicity for<br />
a good deal less money. The durable,<br />
corrosion-resistant powder coat finish<br />
will still be bright and rust-free long<br />
after dip-painted models are covered in<br />
rust. Expect these heavy-duty, rugged<br />
units to be your working partners for a<br />
long, long time.
cOmPlETE AllEY & SWEEP SYSTEm kITS<br />
A L L E Y A N D S W E E P S Y S T E M S<br />
Description Item # Height Approx. Weight Width Length<br />
180 x 20 Sheeted Sweep System SSS 86" 2,750 lbs. 48" 132"<br />
180 x 20 Open-Sided Sweep System OSS 86" 1,900 lbs. 48" 132"<br />
AllEY & SWEEP SYSTEm cOmPOnEnTS & OPTIOnS<br />
Description Item # Height Approx. Weight Width Length<br />
Adjustable Alley Arch – One-Way AAA1 74-1/2" 95 lbs. 38" 4"<br />
Straight 10' Alley Panel SAP10 62" 136 lbs. 2-1/2" 121"<br />
Straight 10' Alley Panel – Sheeted SSAP10 62" 223 lbs. 2-1/2" 121"<br />
Adjustable Alley Arch – Two-Way AAA2 74-1/2" 95 lbs. 38" 4"<br />
Straight 10' Alley Entry Panel w/Arch SAPA10 74-1/2" 153 lbs. 2-1/2" 126"<br />
Straight 10' Alley Entry Panel w/Arch – Sheeted SSAPA10 74-1/2" 287 lbs. 2-1/2" 126"<br />
center Arch Assembly cAA 80-1/2" 165 lbs. 12" 132"<br />
Secondary Arch Assembly SAA 79" 85 lbs. 6" 126"<br />
curved Sweep Panel cSP 62" 136 lbs. 16" 117"<br />
curved Sweep Panel – Sheeted cSSP 62" 236 lbs. 16" 117"<br />
Sweep Pen Gate SPG 62" 136 lbs. 2-1/2" 121"<br />
Sweep Pen Gate – Sheeted SSPG 62" 223 lbs. 2-1/2" 121"<br />
Sweep Gate latch SGl 12-1/2" 35 lbs. 6-1/2" 21"<br />
Attachment Rods AR 4" 5 lbs. 2" 63"<br />
Sliding Alley Gate ScG 80" 196 lbs. 74" 8"<br />
no Back Alley Stop nBAS 6" 42 lbs. 27" 50"<br />
Universal Hookup Bar UHUB 62" 8 lbs. ––– –––<br />
UnIVERSAl HOOkUP BAR<br />
• The ideal connection between most any brand of equipment<br />
to the <strong>Tarter</strong> line<br />
UHUB<br />
• Allows for easy hookup to many different types of panels and systems<br />
NBAS<br />
nO BAck AllEY STOP<br />
• Universal hookup to fit any system<br />
• Prevents animals from backing up in the alley<br />
• Spring-loaded to allow for easy animal passage<br />
• Adjusts to accommodate any size animal and moves with<br />
adjustable alleyway<br />
OPTIOnAl SlIDInG AllEY GATE<br />
• Heavy-duty square tube construction and sheeted door to<br />
block animal view<br />
• Doors slide easily on top-mounted, ball-bearing rollers with<br />
self-cleaning bottom<br />
SCG<br />
• Door features heavy-duty handle and spring-loaded auto latch<br />
• can be used as alleyway entry gate or mid-alley for scales or<br />
other uses<br />
tartergate.com 61
A L L E Y A N D S W E E P S Y S T E M S<br />
3 bows hold the sweep tub in position<br />
(shown partially assembled).<br />
Sheeted Alley & Sweep System pictured with<br />
Cattelmaster Squeeze Chute, which is sold separately.<br />
62 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Open-Sided Alley & Sweep System<br />
pictured with Cattelmaster Squeeze<br />
Chute, which is sold separately.
• Available in oval (44-425 gallons)<br />
• Available in round<br />
(165-, 390- and 706-gallon sizes)<br />
• 4-ply, double-lock bottom<br />
• Deep sidewall corrugation for strength<br />
• Heavy-duty zinc G90 coating withstands<br />
harsh weather conditions<br />
• 1-1/8" top rim is permanently rolled<br />
for strong reinforcement<br />
• 1" tube inside rim of tank for additional<br />
strength<br />
• most feature a 1" drain plug<br />
• Unmatched quality and consistency<br />
in construction<br />
S T O C K T A N K S<br />
HEAVY-DUTY GAlVAnIzED STOck TAnkS<br />
Our Galvanized Stock Tanks are fabricated at liberty Water Tanks, our state-of-the-art manufacturing facility dedicated to the exclusive production<br />
of water tanks. Our rigid standards and unparalleled manufacturing acumen combined with the finest high-quality steel and outstanding value make<br />
these the best galvanized tanks around. We take flat, rolled steel, coated with heavy-duty zinc G90, cut it into precise lengths, then guide it into<br />
shape on computer-driven forming mills that make the world’s best galvanized water tanks at a faster rate and with few chances for human error<br />
ever. The formed tanks are matched to precision-cut bottoms, spot welded and joined by a computer-driven-and-guided seaming station that makes<br />
3 circumferences around each tank bottom before the sealer is applied. Then, 3 or 4 sets of tanks per day are filled with water for testing purposes so<br />
that no leakers ever make it out of the plant. They feature 20-gauge galvanized bottoms and 21-gauge sides as well as a four-ply double-lock seam at<br />
the bottom sealed with Pliogrip ® Adhesive/Sealant Seam Sealer for a superior bond.<br />
Other<br />
features<br />
include:<br />
WT224<br />
WTD224<br />
Oval Galvanized Stock Tanks<br />
Size Capacity Item #<br />
2' x 1' x 4' 44 gallons WT214<br />
2' x 1' x 6' 70 gallons WT216<br />
2' x 2' x 3' 71 gallons WT223<br />
2' x 2' x 4' 100 gallons WT224<br />
2' x 2' x 5' 125 gallons WT225<br />
2' x 2' x 6' 169 gallons WT226<br />
2' x 2' x 8' 220 gallons WT228<br />
3' x 2' x 8' 300 gallons WT328<br />
3' x 2' x 10' 425 gallons WT3210<br />
Round Galvanized Stock Tanks<br />
Size Capacity Item #<br />
4' x 2' 165 gallons WTR42<br />
6' x 2' 390 gallons WTR62<br />
8' x 2' 706 gallons WTR82<br />
Oval Galvanized Stock Tanks<br />
Size Capacity Item #<br />
2' x 2' x 4' 100 gallons WTD224<br />
tartergate.com 63
T A N K S A N D W A T E R E R S<br />
TUFF TAnkS<br />
Our <strong>Tarter</strong> Tuff Tank products are recycled from 100% lowdensity<br />
polyethylene materials. Because they are fashioned<br />
from top-grade recycled materials, they are the best-priced<br />
tanks of their quality on the market. Impact-, heat-, cold- and<br />
U.V.-resistant, these tanks can withstand years of outdoor use.<br />
These tanks will not discolor over time, but they are paintable.<br />
Edges are smooth to provide the greatest safety for humans<br />
and animals. Available with bulk head adapter plug.<br />
Double Bowl Electric Waterer<br />
11-gallon capacity – WEE100<br />
ElEcTRIc WATERERS<br />
Single Bowl Electric Waterer<br />
7-gallon capacity – WEE50<br />
These electric models are built using 100% polyethylene construction, creating strong,<br />
corrosion-free products to provide many years of trouble-free operation. These units are<br />
designed with the protection of the livestock in mind. Additionally, all models listed below are<br />
cSA certified. The polyethylene used in our waterers is FDA and HPB approved, food-grade,<br />
recyclable plastic. Their design also features rounded corners to handle abuse by livestock<br />
while ensuring livestock safety. All models meet “Grade A” Dairy recommendations.<br />
model WEE10 is both wall and floor mount.<br />
64 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Oval Tuff Tanks<br />
Size Capacity Item #<br />
22" x 8" x 28" 15 gallons kmT103<br />
25" x 12" x 35" 30 gallons kmT102<br />
27" x 13" x 38" 40 gallons kmT101<br />
34" x 20" x 51" 110 gallons kmT100<br />
38" x 20" x 56" 140 gallons* kmT99<br />
40" x 24" x 58" 180 gallons* kmT98<br />
*comes with built-in 1" drain plug.<br />
Low Profile Double Bowl<br />
Electric Waterer<br />
5.2-gallon capacity – WEE20<br />
Approx. Heating<br />
Description Item # Height Weight Width Length Capacity Element<br />
Electric Waterer WEE100 26" 54 lbs. 22" 32" 9.2 gallons 250 watts<br />
Electric Waterer WEE50 26" 40 lbs. 22" 27" 4.8 gallons 250 watts<br />
Electric Waterer WEE20 16" 32 lbs. 21-3/4" 28" 5.2 gallons 250 watts<br />
Electric Horse Waterer WEE10 13-1/2" 26 lbs. 17" 17" 2.9 gallons 250 watts<br />
Round Tuff Tanks<br />
Size Capacity Item #<br />
28" x 13" 25 gallons kmB103<br />
33" x 21" 54 gallons kmB101<br />
Miscellaneous Capacity Item #<br />
Feed Drum w/lid 37 gallons kmW105<br />
Feed Pan 7 gallons kmD102<br />
Feed Pan 2-1/2 gallons kmS100<br />
Bulk Head Adapter/Plug kit AD34<br />
Wall or Floor Mount<br />
Electric Horse Waterer<br />
2.9-gallon capacity – WEE10
PORTABlE 5-GAllOn BUckET HOlDER<br />
This bucket holder is lightweight, portable and has an easy bolt-on hanging system that<br />
allows you to quickly and easily hang it on the side of a stall or fence for quick and easy<br />
feeding and watering. Whether on the farm or at a show, you’ll find the versatility of this<br />
bucket holder to be unsurpassed. Available in powder coat red only. Bucket not included.<br />
Approx. Inside<br />
Description Item # Height Weight Width Depth Diameter Capacity<br />
5-Gallon Bucket Holder 5GBH 11-1/8" 5 lbs. 12-3/16" 12" 11-11/16" 5 gallons<br />
W351<br />
A MUST FOR<br />
EVERY WATERER<br />
InSUlATED<br />
EARTH TUBE<br />
The Earth Tube<br />
conserves the Earth’s<br />
ground-source heat as<br />
it rises up, protecting<br />
your water line from<br />
freezing. It has excellent<br />
insulating properties,<br />
amazing structural<br />
strength, and is easily<br />
stackable for deep<br />
installation. The<br />
Earth Tube is highly<br />
recommended<br />
for all cold climates.<br />
T A N K S A N D W A T E R E R S<br />
• constant fresh, clean water; your livestock are<br />
never without water – like pouring your animals<br />
a fresh glass of water, on demand, 24 hours a day<br />
• Enclosed insulated containers help keep water<br />
a constant temperature year-round<br />
• cool drinking water will lower respiration rates<br />
and body temperatures; increase feed intake<br />
and milk yield<br />
• Time saver – automatic water refill<br />
8' ROUnD TAnk<br />
W352NG W44<br />
EnERGY-FREE WATERERS<br />
2' tall with an 8' diameter, this tough polyethylene stock<br />
tank with drain is molded as a single piece and will hold<br />
625 gallons. Available in blue only.<br />
Approx.<br />
Description Item # Height Weight Capacity<br />
8' Round Tank WTP82 24" 85 lbs. 625 gallons<br />
These energy-free models are built using 100% polyethylene construction, creating strong,<br />
corrosion-free products to provide many years of trouble-free operation. These waterers are<br />
designed with rounded corners to handle abuse by livestock while ensuring livestock safety.<br />
• Algae growth reduced on water<br />
• Protection from the elements, eliminating<br />
stagnant water which aids against West nile Virus<br />
• Year-round ease of usage<br />
• Product will not crack or rust in extreme<br />
weather conditions<br />
• Bolt-down method keeps the waterer<br />
in desired location<br />
• less everyday maintenance<br />
Approx.<br />
Description Item # Height Weight Width Length Capacity<br />
Single-Door Energy Free Waterer W351 20" 50 lbs. 23" 28" 17 gallons<br />
Dual-Door Energy Free Waterer W352nG 20" 75 lbs. 23" 41" 22 gallons<br />
Four-Door Energy Free Waterer W44 19" 92 lbs. 36" 41" 40 gallons<br />
Earth Tube IET 49" 22-1/2 lbs. 12-3/4"<br />
tartergate.com 65
T A N K A C C E S S O R I E S<br />
DRAIn PlUG DE-IcER<br />
The Drain Plug De-Icer fits most standard<br />
livestock water tank drains with adjustments that<br />
can be made to seal around the de-icer for a<br />
proper fit. This unit prevents water from freezing<br />
from the bottom of the tank up and comes with<br />
a built-in thermostat. The Drain Plug De-Icer also<br />
stays submerged in water to prevent destruction<br />
by livestock. This is a 120 volt/1500 watt unit<br />
that comes with a 6' cord.<br />
Description Item # Height Approx. Weight Width Length<br />
Drain Plug De-Icer DPD 4-1/2" 2-1/2 lbs. 6-1/2" 14"<br />
FlOATInG DE-IcER<br />
The Floating De-Icer is encased in a<br />
rugged plastic housing for durability<br />
and for long life floating on top of<br />
the water. This tough performer is<br />
designed with a built-in thermostat<br />
and automatic shut-off in the event<br />
the unit is removed from the tank.<br />
This is a 120 volt/1500 watt unit that<br />
comes with a 6' cord.<br />
Description Item # Height Approx. Weight Width Length<br />
Floating De-Icer FTD 6" 2-1/4 lbs. 9" 9"<br />
SInkInG TAnk DE-IcER<br />
The Sinking Tank De-Icer is<br />
dropped into water tanks to<br />
maintain a temperature above<br />
freezing with a thermostat control.<br />
This model comes with a built-in<br />
safety feature to automatically shut<br />
off if it is taken out of the water.<br />
This is a 120 volt/1500 watt unit<br />
that comes with a 6' cord.<br />
Description Item # Height Approx. Weight Width Length<br />
Sinking Tank De-Icer STD 5-1/2" 1-3/4 lbs. 14-1/2" 14-1/2"<br />
WATER TAnk FlOAT VAlVE<br />
The <strong>Tarter</strong> Water Tank Float Valve eliminates<br />
the need for manual water fills or expensive<br />
automatic livestock watering systems. This<br />
rugged unit is designed to attach to existing<br />
water tanks to allow for automatic water fill<br />
when levels are low, eliminating the worry<br />
and hassle of continually filling water tanks.<br />
The <strong>Tarter</strong> Water Tank Float Valve is designed<br />
to operate with gravity flow or pressures up<br />
to 70 PSI and is versatile enough to work<br />
with most any water tank.<br />
• made of tough, high-density • Features replaceable water<br />
polyethylene shut-off orifice<br />
• Attaches to standard garden hose • 300 GPH capacity<br />
Description Item # Height Approx. Weight Width Length<br />
Water Tank Float Valve WTFV 3-3/4" 1-1/3 lbs. 3-3/4" 7-1/2"<br />
66 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
IN V ES T ING IN OUR CUS T OMERS<br />
• NO BARRIERS TO ENTRY! WE CARRY THE INVENTORY<br />
• NO TRUCKLOAD qUANTITIES REqUIRED<br />
• NO LONG LEAD TIMES – SAME 10-14 DAY LEAD<br />
• EASY LOAD BUILDS WITH OTHER PRODUCTS<br />
• UNMATCHED FINISHES – ALL POWDER COATED<br />
• ONE OF THE LARGEST INVENTORIES IN THE NATION<br />
• ALL DELIVERED PRICING<br />
• qUALITY FABRICATION – ALL MADE IN THE U.S.A.<br />
• MARKETING <strong>AND</strong> ADVERTISING SUPPORT<br />
• 100% DEDICATED FACILITY – 280,000 SqUARE FEET<br />
Our 280,000-square-foot,<br />
3-point manufacturing facility was<br />
an investment in our customers who<br />
told us of the need for a reliable<br />
source for quality 3-Point <strong>Equipment</strong>.<br />
We outfitted this plant with state-<br />
of-the-art equipment, designed to<br />
utilize proven lean manufacturing<br />
methods, to create one of the largest,<br />
most efficient 3-point manufacturing<br />
operations in the industry.<br />
3 - P O I N T E Q U I P M E N T<br />
This facility now manufactures<br />
over 45 different 3-point products.<br />
Why the big investment?<br />
You – our customers! This facility<br />
gives you even more choices for farm<br />
and livestock products. All of our<br />
products are manufactured right here<br />
in the U.S.A. And all of our<br />
3-point products are powder coated<br />
for longer life in the field – not<br />
sprayed or dipped like many other<br />
3-point products on the market.<br />
But the most important difference<br />
this facility represents is in our ability<br />
to anticipate demand and build for<br />
your needs. Our 3-Point <strong>Equipment</strong><br />
will come delivered with the other<br />
550 products in the <strong>Tarter</strong> line,<br />
allowing you even greater ease in<br />
building loads and consolidating<br />
vendors. no more six-week lead<br />
times as with some manufacturers.<br />
We offer the same 10-day<br />
delivery service in the east<br />
and 14-day delivery service<br />
in the west you’ve come<br />
to expect from <strong>Tarter</strong>. Our<br />
investment in you is just<br />
another reason why <strong>Tarter</strong><br />
is your number-one choice<br />
for farm and livestock<br />
equipment.<br />
tartergate.com 67
3 - P O I N T E Q U I P M E N T<br />
There’s a lot more work on a farm than feeding the<br />
livestock – the land needs your attention too. And <strong>Tarter</strong><br />
carries the finest rotary cutters, hay spears, cultivators<br />
and other 3-Point <strong>Equipment</strong>, all made in the U.S.A.<br />
From fence line to fence line, <strong>Tarter</strong> has you covered.<br />
Rotary Cutters ..............................69<br />
Hay Spears ............................. 70-71<br />
3-Point <strong>Equipment</strong> ................... 72-73<br />
Tillage <strong>Equipment</strong> ................... 74-76<br />
Sub-Compact<br />
3-Point <strong>Equipment</strong> ................ 77-79<br />
68 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
ROTARY cUTTERS<br />
R O T A R Y C U T T E R S<br />
The <strong>Tarter</strong> medium-duty Rotary cutters, available in 4', 5' and 6' sizes, are built to be durable and productive in a variety<br />
of applications. These tough cutters can handle grass, stalks and brush with ease. Taking their power from the PTO of your<br />
tractor, these units work efficiently up to 45 HP on 540 RPm category I and II tractors. The laminated, puncture-resistant,<br />
adjustable rear wheel easily changes the cutting angle of the deck, provides stability and smooth operation, reduces scraping,<br />
and allows for easy mowing height adjustments. Additional features include a shielded PTO with shear pin, cast iron gearbox,<br />
and stump jumper with heat-treated forged blades. The 5' and 6' are available in Square Back or Round Back configurations.<br />
Adjustable for cutting height, this family of tough performers is available in durable, corrosion-resistant powder coat gray.<br />
• 45 HP heavy-duty cast iron 540 RPm gearbox<br />
• 12-gauge deck, 8-gauge sides; series 4 driveline<br />
• Adjustable, laminated, puncture-resistant rear wheel<br />
• Shielded PTO shaft with shear pin<br />
• Stump jumper with heavy-duty, heat-treated forged blades<br />
• Assembles in minutes<br />
• category I pins included with purchase<br />
• Also available with 65 HP gearbox and slip clutch on special order only<br />
• Available in Square Back or Round Back designs<br />
Description Item # Unit Height Approx. Weight Width Length<br />
4' Rotary cutter RcGR4 24" 360 lbs. 50" 69"<br />
5' Rotary cutter RcGR5 24" 460 lbs. 63" 81"<br />
6' Rotary cutter RcGR6 24" 580 lbs. 75-1/2" 94-1/2"<br />
5' Rotary cutter Round Back RBRc5 24" 445 lbs. 64" 94"<br />
6' Rotary cutter Round Back RBRc6 24" 550 lbs. 76" 105"<br />
NOTE: Gearbox ships without oil and must be filled with 90 wt. gear oil before first use.<br />
Front and rear rubber guards are available for all units.<br />
RBRC6<br />
RCGR4<br />
Features durable,<br />
corrosion-resistant<br />
powder coat finish.<br />
tartergate.com 69
H A Y S P E A R S<br />
STAnDARD HAY SPEAR<br />
Our Standard Hay Spear is built heavy-duty for most any<br />
category 1 3-point hitch. It features a welded spear and stabilizer<br />
spikes and can carry bales weighing up to 1,500 lbs. category<br />
I pins are included with purchase. This product features our<br />
durable, corrosion-resistant powder coat gray.<br />
Approx. Empty Overall Center Spear Stabilizer Spike Max. Bale<br />
Description Item # Height Spear Weight Width Length Length Length Capacity<br />
Standard Hay Spear HFGR 26-1/4" 95 lbs. 36" 51" 45" 14-1/2" 1,500 lbs.<br />
HEAVY-DUTY SUPER SPEAR<br />
Our Heavy-Duty Super Spear is designed for<br />
the heaviest of round bale lifting. Featuring<br />
a heavy-duty replaceable heat-treated<br />
upper spear and 2 lower welded stabilizer<br />
bars for extra hold, this spear hooks to<br />
most any category I 3-point hitch.<br />
category I pins are included with purchase.<br />
This product features our durable,<br />
corrosion-resistant powder coat gray.<br />
Approx. Empty Overall Upper Spear Lower Spike Max. Bale<br />
Description Item # Height Spear Weight Width Length Length Length Capacity<br />
Heavy-Duty Super Spear SSGR 26-1/4" 75 lbs. 36" 51-1/2" 44-1/2" 14-1/2" 2,200 lbs.<br />
STAnDARD BUckET SPEAR<br />
Our Standard Bucket Spear includes a welded spear, two<br />
stabilizer spikes, mounts and dismounts with one bolt, and<br />
lifts hay without having to remove loader bucket. This spear<br />
is recommended for lifting bales up to 1,500 lbs. This product<br />
features our durable, corrosion-resistant powder coat gray.<br />
Approx. Empty Overall Center Spear Stabilizer Spike Max. Bale<br />
Description Item # Height Spear Weight Width Length Length Length Capacity<br />
Standard Bucket Spear SBSGR 16" 100 lbs. 28-3/4" 62-3/4" 45" 15" 1,500 lbs.<br />
70 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
BUckET-mOUnT SUPER SPEAR<br />
Our Bucket-mount Super Spear features 2 stabilizer spikes and a replaceable<br />
heavy-duty, heat-treated spear. It easily mounts and dismounts with a single bolt<br />
without removing front bucket and is capable of lifting bales up to 2,200 lbs.<br />
This product features our durable, corrosion-resistant powder coat gray.<br />
FROnT ADJUSTABlE SUPER SPEAR<br />
Our Front Adjustable Super Spear mounts in place of the bucket on a front-end loader and<br />
features a replaceable heavy-duty, heat-treated spear and 2 stabilizer spikes. It has sliding<br />
mounting brackets with multiple hole adjustments to fit most any front end loader. This<br />
product features our durable, corrosion-resistant powder coat gray.<br />
HEAVY-DUTY HAY lIFTER<br />
Our Heavy-Duty Hay lifter is built to lift the heaviest<br />
of round bales that normal spears can’t touch! It<br />
also helps in lifting loose or older bales. This unique<br />
unit features 2-stage category I and category II pin<br />
hookups, all in the same design, so that it will fit<br />
most any tractor size. All pins for both categories are<br />
included with purchase. This product features our<br />
durable, corrosion-resistant powder coat gray.<br />
H A Y S P E A R S<br />
Approx. Empty Overall Center Spear Stabilizer Spike Max. Bale<br />
Description Item # Height Spear Weight Width Length Length Length Capacity<br />
Bucket-mount Super Spear BSGR 8-3/4" 65 lbs. 30-1/4" 61-1/2" 45" 15" 2,200 lbs.<br />
Approx. Empty Overall Center Spear Stabilizer Spike Max. Bale<br />
Description Item # Height Spear Weight Width Length Length Length Capacity<br />
Front Adjustable Super Spear FSSGR 20-1/4" 200 lbs. 61" 52-1/2" 44" 13" 2,200 lbs.<br />
Approx. Empty Overall Max. Bale<br />
Description Item # Height Spear Weight Width Length Capacity<br />
Heavy-Duty Hay lifter HlGR 32" 180 lbs. 44" 60-1/4" 2,200 lbs.<br />
tartergate.com 71
3 - P O I N T E Q U I P M E N T<br />
REAR GRADER BlADES<br />
Our Rear Grader Blade is ideal for the farmer with light-duty moving needs<br />
such as sand, snow or gravel. It features a pull-pin design with forward<br />
and reversible blade angle adjustment and a 1/4" blade with a 1/2"-thick<br />
replaceable cutting edge. category I pins are included with purchase. This<br />
product features our durable, corrosion-resistant powder coat gray.<br />
Unit Blade Approx. Replacment<br />
Description Item # Height Height Weight Width Length Blade Item #<br />
5' Rear Grader Blade GBGR5 23" 15" 242 lbs. 60" 42" RB5<br />
6' Rear Grader Blade GBGR6 23" 15" 262 lbs. 72" 42" RB6<br />
7' Rear Grader Blade GBGR7 23" 15" 282 lbs. 84" 42" RB7<br />
BOOm POlE<br />
72 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
cARRY All<br />
Our carry All is a very handy, versatile piece of equipment for the farmer with small moving needs.<br />
A variety of platforms can be constructed to fit any situation. category I pins are included with<br />
purchase. This product features our durable, corrosion-resistant powder coat gray.<br />
NOTE: Material for platform assembly not included.<br />
GBGR5<br />
Front<br />
View<br />
GBGR5 – Rear View<br />
Empty Overall Platform Overall Platform Carry<br />
Description Item # Height Weight Width Arm Width Length Arm Length Capacity<br />
carry All cAGR 36" 50 lbs. 29" 28" 36" 33" 1,000 lbs.<br />
Our Boom Pole is a handy picker-upper for the farmer. It is ideal for many tasks including loading items<br />
on to trailers, pulling up old fence posts or other lifting chores. This boom features 2 different lifting<br />
loops for extra capacity. category I pins are included with purchase. This product features our durable,<br />
corrosion-resistant powder coat gray.<br />
Empty Lift Capacity Lift Capacity<br />
Description Item # Height Weight Width Length Front Loop Back Loop<br />
Boom Pole BPGR 25-1/2" 50 lbs. 32" 85-1/2" 500 lbs. 1,000 lbs.<br />
TARTER FERTIlIzER SPREADERS AnD SEEDERS<br />
Our Fertilizer Spreaders and Seeders are industry-best units for 3-point hitch spreading. Both units are identical in capacity and features,<br />
with one offering an all-steel tub and the other an all-poly tub. Both products feature:<br />
• Seamless, 1-piece, 850-lb./65-gallon capacity hoppers<br />
• Reversible lift arm pins to accommodate different size tractors<br />
• PTO-driven wheel agitator for material mixing and smooth,<br />
consistent flow<br />
• PTO-driven spin broadcast with super treated<br />
spreading disc and galvanized fins<br />
• Side discharge hopper guarantees greater<br />
accuracy and more even spreading<br />
• Spreading width up to 46'<br />
• can broadcast to each side for directional<br />
spreading when needed<br />
• Fully splined gearbox shaft<br />
• Fully galvanized opening system kit<br />
Tub<br />
Agitator<br />
• Super-duty epoxy painting throughout the complete frame<br />
FS<br />
Spreading volume coverage and rate will vary with the material being spread,<br />
spreader aperture settings, machine speed, and terrain. consult the spreader rate<br />
chart for precise indications. Unit performs optimally at ground speed of 6-8 mPH and PTO speed of 540 RPm.<br />
Description Item # Color Height Approx. Weight Tub Diameter Spreading Capacity Width<br />
Fertilizer Spreader – metal Tub FS Red 42" 135 lbs. 40" 850 lbs./65 gal. 46'<br />
Fertilizer Spreader – Poly Tub FSP Yellow 42" 130 lbs. 40" 850 lbs./65 gal. 46'<br />
FSP
REAR DIRT ScOOP<br />
This ingenious scoop drops down by means of a lanyard latch and<br />
can be backed or driven into dirt, gravel, mulch or other materials to<br />
take a wheelbarrow-sized bite and allow it to be moved and dumped<br />
by a simple pull on the control rope. Dual category I hookup allows<br />
identical hookup from either side. Bucket is formed of 6-gauge metal.<br />
category I pins included with purchase. This product features our<br />
durable, corrosion-resistant powder coat gray.<br />
Description Item # Height Approx. Weight Width Depth<br />
Rear Dirt Scoop DSRGR 32" 255 lbs. 42" 38"<br />
NOTE: Rope not included.<br />
3 - P O I N T E Q U I P M E N T<br />
WIRE FEncE STRETcHER/UnROllER<br />
This Stretcher/Unroller lets one person handle the<br />
work of a crew. Field fence of all sizes can be unrolled<br />
and stretched easily without kinking or tangling.<br />
Once unrolled, fence can be stretched to the desired<br />
tightness and held in place for nailing or stapling.<br />
Easily hooks up to your 3-point hitch using the<br />
category I pins included. This product features our<br />
durable, corrosion-resistant powder coat gray.<br />
TRAIlER mOVER<br />
Our Trailer mover is handy for easy movement of gooseneck trailers, regular trailers or farm wagons. With this<br />
piece of equipment, gooseneck trailers can be moved without raising the landing gear. Just slide in your 2"<br />
receiver with your 1-7/8", 2", or 2-5/16" ball to move any type of trailer. Slide in your receiver without a ball and<br />
pin drop any farm wagon. A 2-5/16" ball is included with purchase and the 2" receiver accepts hitch for pin drop<br />
wagons or ball mount trailers. It is made to fit most category I and category II 3-point hitches and the category I<br />
pins are included with purchase. This product features our durable, corrosion-resistant powder coat gray.<br />
Description Item # Height Approx. Weight Width Depth<br />
Trailer mover TmGR 32" 56 lbs. 36" 12"<br />
2" REcEIVER WIRE UnROllER<br />
The heavy-duty, powder coated 2" Receiver Wire Unroller is perfect for tough fencing jobs in<br />
tight places. This fencer’s helper handles an entire roll of fencing wire and allows your tractor<br />
or truck to do the work of a crew. This product features an easy-to-mount design. As an ATV<br />
Unroller it comes with a multi-Receiver Hitch that fits all ATVs with factory hitches. As a 2"<br />
Receiver Unroller it works with a standard 2" receiver hitch. let this tough tool stand in for a<br />
handful of helpers. This product features our durable, corrosion-resistant powder coat gray.<br />
Description Item # Approx. Weight Height Length Width<br />
2" Receiver Wire Unroller 2RWUGR 26 lbs. 12" 23" 24"<br />
ATV Wire Unroller ATVWUGR 32 lbs. 12" 25" 24"<br />
Opening Overall Rod Approx.<br />
Description Item # Height Height Height Weight Length<br />
Wire Fence Stretcher/Unroller WFSGR 65" 71" 75" 200 lbs. 45"<br />
Multi-Receiver<br />
Hitch for ATV<br />
Unroller<br />
tartergate.com 73
T I L L A G E E Q U I P M E N T<br />
mEDIUm-DUTY 20-BlADE<br />
6' TIllAGE DISc<br />
This hard worker is just big enough for<br />
the small farmer and just small enough for<br />
the home garden. This medium-duty disc<br />
makes planting the garden a pleasure. Features<br />
include a heavy-duty welded angle-iron frame,<br />
10-18" x 3mm notched blades, 10-18" x 3mm<br />
smooth blades for better tillage, and heavy-duty<br />
sealed bearings. This hard worker breaks up 6-1/2'<br />
of soil on a single pass. category I pins are included<br />
with purchase. This product features our durable,<br />
corrosion-resistant powder coat gray.<br />
Description Item # Height Approx. Weight Width Length<br />
medium-Duty 6' Disc, 18" Blades mDDGR6 41" 553 lbs. 73" 50"<br />
NOTE: Scalloped blades are available on rear gangs with a 10-day lead time and $25 upcharge. Know your tractor’s capabilities<br />
before using this equipment. Never exceed the manufacturer’s recommended equipment handling capabilities when using 3-Point <strong>Equipment</strong>.<br />
OnE ROW cUlTIVATOR<br />
Our One Row cultivator is designed for family gardening and smaller<br />
farming operations. The cultivator is useful in preparing garden soil,<br />
planting beds and cultivating for weed control and may also be used<br />
to remove mulch and undergrowth. Featuring 6 cultivator tines with<br />
1-3/4" x 10" long reversible curved points, this cultivator is rated for<br />
tractors less than 50 HP. category I pins are included with purchase.<br />
This product features our durable, corrosion-resistant powder coat gray.<br />
Description Item # Height<br />
Approx.<br />
Weight Width Length<br />
One Row cultivator cUlGR 36" 102 lbs. 50-1/2" 37"<br />
74 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
FIElD cUlTIVATOR<br />
The heavy-duty 3-point Field cultivator features a powder coated<br />
box frame with 13 adjustable 5-curve tines. With its 72" working<br />
width, it is perfect for weed control, preparing seed beds, burying<br />
crop residue, mixing soil and other soil surface prep needs. It has<br />
category I pins and width – ideal for tractors from 25-45 HP. This<br />
Field cultivator features removable, curved 1-1/4" x 8" points.<br />
Description Item # Height<br />
Approx.<br />
Weight Width Length<br />
Field cultivator FcGR 39" 267 lbs. 73-1/4" 37-1/2"
2BPGR<br />
MBGR<br />
T I L L A G E E Q U I P M E N T<br />
HEAVY-DUTY 20-BlADE<br />
6' TIllAGE DISc<br />
nearly 1/3 heavier than our medium-duty tillage disc, this heavy-duty box<br />
frame disc cuts through plowed soil even after rains and baking sun. Designed for<br />
serious farming or commercial operations where higher horsepower tractors are in use, this unit<br />
features 10-18" x 3mm notched blades, 10-18" x 3mm smooth blades, and heavy-duty sealed bearings.<br />
Front and rear disc gangs have adjustable cutting angles and together they cut a 6-1/2' swath with each pass.<br />
This disc can be pulled by 30 HP tractors and greater. category I pins are included with purchase.<br />
This product features our durable, corrosion-resistant powder coat gray.<br />
NOTE: Scalloped blades are available on rear gangs with a 10-day lead time and $25 upcharge. Know your tractor’s capabilities<br />
before using this equipment. Never exceed the manufacturer’s recommended equipment handling capabilities when using 3-Point <strong>Equipment</strong>.<br />
mIDDlE BUSTER<br />
Our middle Buster is designed with a 15" double-wing cutting blade for single<br />
rows and is handy for planting or plowing up potatoes. Rated for tractors less<br />
than 50 HP. category I pins are included with purchase. This product features<br />
our durable, corrosion-resistant powder coat gray.<br />
SUBSOIlER<br />
Description Item # Height Approx. Weight Width Length<br />
Heavy-Duty 6' Disc, 18" Blades HDDGR6 41" 846 lbs. 84" 53-1/2"<br />
TURnInG PlOWS<br />
Available in single or two bottom units, this versatile plow cuts<br />
through even compacted soils with ease. Replaceable plow shares,<br />
shins, and landsides are available. Plows fit most any category I<br />
3-point hitch and category I pins are included with purchase. This<br />
product features our durable, corrosion-resistant powder coat gray.<br />
Description Item # Height<br />
Approx.<br />
Weight Width Length<br />
1 Bottom Plow 1BPGR 40-1/2" 256 lbs. 33" 45"<br />
2 Bottom Plow 2BPGR 40-1/2" 479 lbs. 40" 71"<br />
Approx. Overall Blade Blade<br />
Description Item # Height Weight Width Width Length<br />
middle Buster mBGR 38-1/2" 79 lbs. 31" 19" 11"<br />
Our Subsoiler is designed for deep breakage of hard, low ground where water<br />
accumulates. Water will drain easily after one pass with this equipment. Featuring<br />
a 3/4" x 4" solid steel shank with reversible, rectangular, sloped point (2-9/16" x 12"),<br />
this subsoiler is rated for tractors less than 50 HP. category I pins are included with<br />
purchase. This product features our durable, corrosion-resistant powder coat gray.<br />
Approx. Useable<br />
Description Item # Height Weight Width Length Depth<br />
Subsoiler SUBGR 49" 96 lbs. 32-1/2" 16" 22"<br />
1BPGR<br />
SUBGR<br />
tartergate.com 75
T I L L A G E E Q U I P M E N T<br />
Landscape Rake Wheel Kit – LRWK<br />
(fits all sizes)<br />
LRGR6<br />
lAnDScAPE RAkES WITH OPTIOnAl WHEEl kITS<br />
Steel tines curve to make quick work of smoothing, raking or<br />
contouring soil surfaces. Gathering twigs, rocks and other debris<br />
is easy work when this tough performer is put to the task. Rake<br />
rotates a full 360° to be pulled or pushed. Use these models with<br />
or without wheels using the optional landscape Rake Wheel<br />
kit. Without wheels, the rake rests at grade level. With wheels,<br />
several points of adjustment allow varying heights above grade.<br />
category I pins are included with purchase. Available in 5', 6' and<br />
7' models, in durable, corrosion-resistant powder coat gray.<br />
NOTES: This unit can be fitted with optional wheel kit.<br />
76 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
BOx BlADES<br />
This rugged steel rear-mount box blade is ideal for small<br />
horsepower tractors working gravel, topsoil, mulch, manure<br />
and more. Boxed ends help retain product being worked. Double-sided<br />
blade allows for grading in both directions. category I pins are included<br />
with purchase. Features 2 replaceable 1/2"-thick blades and adjustable ripper<br />
shanks. metal gauge for blade sides is 5/16" and back is 3/16". This product is rated for<br />
tractors up to 50 HP and features our durable, corrosion-resistant powder coat gray.<br />
Approx. Replacement<br />
Description Item # Height Weight Width Length Blade item #<br />
5' Box Blade BBGR5 33" 442 lbs. 61-1/2" 31" RB5<br />
6' Box Blade BBGR6 33" 507 lbs. 73-1/2" 31" RB6<br />
LRGR6 with optional<br />
Landscape Rake Wheel Kit<br />
Description Item #<br />
Approx.<br />
Height Weight Width Length<br />
5' landscape Rake lRGR5 21" 199 lbs. 61" 50"<br />
6' landscape Rake lRGR6 21" 214 lbs. 73" 50"<br />
7' landscape Rake lRGR7 21" 274 lbs. 85" 50"<br />
landscape Rake Wheel kit lRWk 12" 22 lbs. 10" 25"
S U B - C O M P A C T 3 - P O I N T E Q U I P M E N T<br />
CATEGORY I PIN hOOkUP <strong>AND</strong><br />
CATEGORY 0 SPACING fOR TODAY’S<br />
SUB-COmPACT TRACTORS.<br />
5' DISc Sc<br />
This heavy-duty welded angle-iron frame Disc Harrow<br />
helps make your work all pleasure. Features include<br />
16-14" x 3mm notched cutting blades to make<br />
quick work of a commercial garden or a backyard<br />
vegetable plot, and heavy-duty sealed bearings.<br />
category I pin hookup and category 0 spacing for<br />
today’s sub-compact tractors. category I pins included<br />
with purchase. This product is available in durable,<br />
corrosion-resistant powder coat red.<br />
Description Item # Height Approx. Weight Width Length<br />
5' Disc Sc DScR5 30-1/2" 407 lbs. 58" 48"<br />
NOTES: Gearbox ships without oil and must be filled with 90 wt.<br />
gear oil before first use. This unit ships with front guard installed.<br />
Optional rear guard available (rubber only).<br />
4' ROTARY cUTTER Sc<br />
This Rotary cutter takes its power from the 3-point PTO of your tractor and efficiently and<br />
neatly cuts a 4' swath. Rear wheels help provide a smooth, stable ride and give excellent<br />
adjustability for cutting height. category I pins included with purchase. This product is<br />
available in durable, corrosion-resistant powder coat red.<br />
• 45 HP heavy-duty cast iron<br />
540 RPm gearbox<br />
• 12-gauge deck, 8-gauge sides;<br />
series 4 driveline<br />
• Adjustable solid rear wheels help support<br />
the weight and keep the cutter level<br />
• Shielded PTO shaft with shear pin<br />
• Stump jumper with heavy-duty,<br />
heat-treated forged blades<br />
• Assembles in minutes<br />
• category I pin hookup and category 0<br />
spacing for today’s sub-compact tractors<br />
Unit Approx.<br />
Description Item # Height Weight Width Length<br />
4' Rotary cutter Sc RcScR4 24" 360 lbs. 50" 69"<br />
tartergate.com 77
S U B - C O M P A C T 3 - P O I N T E Q U I P M E N T<br />
4' BOx BlADE Sc<br />
This rugged steel rear-mount box blade is ideal for smaller horsepower sub-compact tractors (35 HP and below). It’s perfect for gravel, topsoil, mulch or<br />
manure. Boxed ends help retain product being worked. category I pin hookup and category 0 spacing for today’s sub-compact tractors. Double-sided<br />
blade allows for grading in both directions. category I pins are included with purchase. Features 2 replaceable 1/2"-thick blades and adjustable ripper<br />
shanks. metal gauge for blade sides is 5/16" and back is 3/16". This product is available in durable, corrosion-resistant powder coat red.<br />
Approx. Replacement<br />
Description Item # Height Weight Width Length Blade Item #<br />
4' Box Blade Sc BBScR4 32" 284 lbs. 49-1/2" 28" RB4<br />
REAR DIRT ScOOP Sc<br />
This ingenious scoop drops down by means of a lanyard latch and can be backed or<br />
driven into dirt, gravel, mulch, or other materials to take a wheelbarrow-sized bite<br />
and allow it to be moved and dumped by a simple pull on the control rope. Bucket is<br />
formed of 6-gauge metal. category I pin hookup and category 0 spacing for today’s<br />
sub-compact tractors. Dual category I hookup allows identical hookup from either<br />
side. category I pins are included with purchase. This product is available in durable,<br />
corrosion-resistant powder coat red.<br />
Description Item # Height Approx. Weight Width Depth<br />
Rear Dirt Scoop Sc DSScR 31" 215 lbs. 36-1/2" 34"<br />
NOTE: Rope not included.<br />
78 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
mIDDlE BUSTER/SUBSOIlER Sc<br />
Our middle Buster/Subsoiler Sc is designed as a dual feature<br />
tool. Use the double-wing cutter for planting or plowing<br />
up potatoes. Attach subsoiler point to break up hard, low<br />
ground where water accumulates. Water will drain easily<br />
after one pass with the equipment. category I pin hookup<br />
and category 0 spacing for today’s sub-compact tractors.<br />
category I pins are included with purchase. This product is<br />
available in durable, corrosion-resistant powder coat red.<br />
Description<br />
middle Buster/<br />
Item # Height<br />
Approx.<br />
Weight Width<br />
Subsoiler Sc mBSSScR 31" 35 lbs. 27"
S U B - C O M P A C T 3 - P O I N T E Q U I P M E N T<br />
5' REAR GRADER BlADE Sc<br />
Designed to pull, grade, and condition gravel or<br />
soil, this rugged steel blade is ideal for driveway<br />
repairs or for smoothing out topsoil. It features<br />
a pull-pin design with forward and reversible<br />
blade angle adjustment and a 1/4" blade with a<br />
1/2"-thick replaceable cutting edge. category I<br />
pin hookup and category 0 spacing for today’s<br />
sub-compact tractors. category I pins included<br />
with purchase. This product is available in durable,<br />
corrosion-resistant powder coat red.<br />
Unit Blade Approx. Replacement<br />
Description Item # Height Height Weight Width Length Blade Item #<br />
5' Rear Grader Blade Sc RBScR5 26" 13" 240 lbs. 60" 22" RB5<br />
5' lAnDScAPE RAkE Sc<br />
Steel tines curve to make quick work of smoothing, raking<br />
or contouring soil surfaces. Gathering twigs, rocks and other<br />
debris is easy work when this tough performer is put to the task.<br />
Rake rotates a full 360° to be pulled or pushed. category I pin<br />
hookup and category 0 spacing for today’s sub-compact tractors.<br />
category I pins are included with purchase. This product is available<br />
in durable, corrosion-resistant powder coat red.<br />
Description Item # Height Approx. Weight Width Length<br />
5' landscape Rake Sc lRScR5 21" 177 lbs. 61" 48"<br />
NOTE: This unit can be fitted with optional wheel kit.<br />
tartergate.com 79
W I R E A N D F E N C I N G<br />
Fence need replacing? Or expanding your farm’s horizons? <strong>Tarter</strong> carries the tools<br />
you require to keep your farm or ranch safe from outside predators and keep your<br />
livestock safely inside. From wire, fencing and wire panels to all the hardware<br />
necessary to keep things running smoothly, we have you covered.<br />
Wire and Fencing .................... 81-84<br />
Wire Panels .................................... 85<br />
Hardware ..................................86-90<br />
80 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide
eArTH ANcHors<br />
These handy tools screw<br />
into soil and provide an<br />
easy tie-down for a variety<br />
of uses. Use earth Anchors<br />
to hold tarps in place,<br />
as sturdy tent or canopy<br />
tie-downs, as braces on<br />
construction sites or to<br />
hold temporary fence.<br />
Available in red only.<br />
Approx.<br />
Description Item # Weight<br />
9/16" x 3" x 15" eA315 2 lbs.<br />
9/16" x 3" x 30" eA330 3 lbs.<br />
9/16" x 4" x 40" eA440 3 lbs.<br />
5/8" x 5" x 48" eA548 4 lbs.<br />
Hinge joint construction<br />
provides flexibility<br />
and shape retention<br />
Tension curve helps maintain<br />
fence uniformity despite<br />
extremes of temperature<br />
PosT driver<br />
our Post driver is<br />
fashioned from 2"<br />
scH 40 pipe, is<br />
28-1/4" long and<br />
weighs approximately<br />
14 pounds. sturdy<br />
19" x 1/2" rod<br />
handles make driving<br />
posts easy on the<br />
user. Available in<br />
powder coat red only.<br />
W I R E A N D F E N C I N G<br />
T-PosTs<br />
• Always in stock in our warehouse<br />
• Available in 10 days or less in the<br />
east and 14 days or less in the west,<br />
just like all other <strong>Tarter</strong> products<br />
• No truckload or 1/2 truckload<br />
minimums required<br />
• Add 1 skid, 2 skids or whatever<br />
quantity you need for fill-in or special order<br />
• Perfect complement to any existing T-post program<br />
you currently have in place<br />
• Available in green only<br />
1.25 lbs./ft. Approx. 1.33 lbs./ft. Approx.<br />
Description Item # Weight Item # Weight<br />
5' TP5125 6.69 lbs. TP5133 7.32 lbs.<br />
5.5' TP512125 7.32 lbs. TP512133 7.99 lbs.<br />
6' TP6125 7.95 lbs. TP6133 8.65 lbs.<br />
6.5' TP612125 8.57 lbs. TP612133 9.32 lbs.<br />
7' TP7125 9.20 lbs. TP7133 9.98 lbs.<br />
8' TP8125 10.45 lbs. TP8133 11.31 lbs.<br />
10' ––– ––– TP10133 14.00 lbs.<br />
T-PosT PUller<br />
This ingenious tool creates a tight connection between<br />
the pulling head and T-post while the base functions<br />
as a fulcrum. A small amount of pull exerts a<br />
powerful force on the post, pulling it quickly<br />
and neatly out of the ground. The T-Post<br />
Puller folds for easy storage when<br />
not in use. A must for every<br />
pickup and farm toolbox.<br />
Available in powder<br />
coat red<br />
only.<br />
Description Item # Approx. Weight Length Width Height<br />
Post driver Pd 14 lbs. 28-1/4" 7-3/4" –––<br />
T-Post Puller TPP 21 lbs. 64" ––– 31"<br />
Field FeNce<br />
• Available in 3 different gauges and also in class 1 and class 3<br />
• Heavy-duty galvanized coating<br />
• Palletized and shrink-wrapped<br />
Galvanized – Class 1<br />
Item # Description Gauge Spacing Height Length<br />
348102A 832-6 12.5 6" 32" 330'<br />
348104T 939-6 12.5 6" 39" 330'<br />
348106T 1047-6 12.5 6" 47" 330'<br />
348122T 1047-6 11 6" 47" 330'<br />
348120T 1047-6 9 6" 47" 330'<br />
Galvanized – Class 3<br />
Item # Description Gauge Spacing Height Length<br />
348130T 1047-6 11 6" 47" 330'<br />
348132T 1047-6 9 6" 47" 330'<br />
tartergate.com 81
W I R E A N D F E N C I N G<br />
HORSE FEncE<br />
• class 1 galvanized for corrosion resistance<br />
• continuous vertical and horizontal wires<br />
• Squares connected with horse-safe knot<br />
• Strong, rigid and designed for horse safety<br />
Galvanized – Class 1<br />
Item # Description Gauge Spacing Height Length<br />
348308T 1348-2 12.5 4" x 2" 48" 100'<br />
348310T 1660-2 12.5 4" x 2" 60" 100'<br />
348312A 1972-2 12.5 4" x 2" 72" 100'<br />
POUlTRY nETTInG<br />
• Hexagonal design for superior strength<br />
• Reinforced lines equally spaced<br />
across netting<br />
• made perfectly straight and flat<br />
• Ideal for poultry cages or enclosures,<br />
garden fencing, insulation retainers,<br />
storage bins, decorative supports<br />
and stone wrapping<br />
82 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
Galvanized 1" Hexagon<br />
Item # Gauge Height Length<br />
308421A 20 36" 50'<br />
308447A 20 72" 50'<br />
308413A 20 24" 150'<br />
308427A 20 36" 150'<br />
308434A 20 60" 150'<br />
308435A 20 72" 150'<br />
*Other sizes available upon request.<br />
SHEEP AnD GOAT<br />
FIElD FEncE<br />
Galvanized 2" Hexagon<br />
Item # Gauge Height Length<br />
308475A 20 36" 50'<br />
308476A 20 48" 50'<br />
308479A 20 72" 50'<br />
308495A 20 36" 150'<br />
308496A 20 48" 150'<br />
308497A 20 60" 150'<br />
308498A 20 72" 150'<br />
• 4" x 4" spacing for goats and other small animals<br />
• 48" high<br />
• 12.5 gauge<br />
• class 1 zinc coating<br />
• 330' per roll<br />
• 4 rolls per pallet<br />
Galvanized – Class 1<br />
Item # Gauge Spacing Height Length<br />
356106T 12.5 4" x 4" 48" 330'
ElEcTRIc FEncE WIRE<br />
• made with superior quality high-tensile steel<br />
• For a low-cost temporary or permanent fence<br />
• Galvanized zinc coating resists rust and corrosion<br />
• Tension and breaking strength resistance twice<br />
as high as the common galvanized wire<br />
• Allows placing of posts every 65'<br />
without deformation<br />
• Available in 14 and 17 gauges<br />
• 1,320' and 2,640' rolls<br />
• meets ASTm-641 standard<br />
TRADITIOnAl BARBED WIRE<br />
• Available in class 1<br />
• 2-point or 4-point barbs<br />
• Palletized and shrink-wrapped<br />
(27 spools per pallet)<br />
• 5" barb spacing<br />
• Each spool contains 1/4 mile<br />
of product<br />
2 Point 4 Point<br />
WElDED WIRE<br />
• Heavy-duty galvanized wire<br />
• 4" x 2" spacing<br />
W I R E A N D F E N C I N G<br />
Electric Fence Wire<br />
Item # Gauge Length<br />
Spools<br />
Per Box<br />
317774T 14 1/4 mile 2<br />
317772T 14 1/2 mile 1<br />
317754T 17 1/4 mile 4<br />
317752T 17 1/2 mile 2<br />
Class 3 Electric Fence Wire<br />
Item #<br />
Rolls<br />
Gauge Length Per Pallet<br />
317732T 12-1/2 4,000' 20<br />
• High-tech welding process results<br />
in stronger welds and longer life<br />
• Ideal for animal enclosures or<br />
plant protection<br />
• Product comes in 100' rolls<br />
Barbed Wire – Class 1<br />
Item # Description Barbs Spacing Gauge<br />
317821A Barbed Wire class 1 2PT 5" 12.5<br />
317831T Barbed Wire class 1 4PT 5" 12.5<br />
317801T Barbless cable class 1 ––– ––– 12.5<br />
HEAVY-DUTY clASS 3 ElEcTRIc FEncE WIRE<br />
• High-tensile steel<br />
• class 3 galvanized<br />
• 200,000 PSI<br />
• meets or exceeds ASTm-A-854 standards<br />
• 12.5 gauge wire<br />
• 48% more electrical conductivity than standard<br />
14.5 gauge wire<br />
• 77% savings in posts – allows posts to be placed<br />
every 65-1/2' without deformity<br />
• 20 rolls per pallet, 100 lbs. per roll, 4,000' per roll<br />
Item # Gauge Height Length<br />
308321A 12.5 36" 100'<br />
308322T 12.5 48" 100'<br />
308323T 12.5 60" 100'<br />
308324A 12.5 72" 100'<br />
308311A 14.0 36" 100'<br />
308312T 14.0 48" 100'<br />
308313T 14.0 60" 100'<br />
308314A 14.0 72" 100'<br />
HIGH-TEnSIlE BARBED WIRE<br />
• Available in class 3<br />
• Heavy-duty galvanized<br />
coating for years of longer<br />
life<br />
• Weighs 50% less than<br />
traditional barbed wire<br />
without losing strength<br />
• Allows for further placement<br />
distance between posts<br />
• Extra-sharp barbs<br />
• Easy carrying handle<br />
• cardboard cover protects from sharp barbs<br />
• Palletized and shrink-wrapped (48 spools per pallet)<br />
Barbed Wire – Class 3<br />
Item # Description Barbs Spacing Gauge<br />
317871T Barbed Wire High-Tensile class 3 2PT 5" 15.5<br />
317881T Barbed Wire High-Tensile class 3 4PT 5" 15.5<br />
tartergate.com 83
W I R E A N D F E N C I N G<br />
1/2 mile<br />
(160 Rods)<br />
1/4 mile<br />
(80 Rods)<br />
1/8 mile<br />
(40 Rods)<br />
2.5 Acres<br />
(100 Rods)<br />
1/4 mile (80 Rods)<br />
10 Acres<br />
(160 Rods)<br />
40 Acres<br />
(320 Rods)<br />
5 Acres<br />
(120 Rods)<br />
1/2 mile (160 Rods)<br />
20 Acres (240 Rods)<br />
1/4 mile (80 Rods)<br />
1/8 mile<br />
(40 Rods)<br />
160 Acres (640 Rods)<br />
BARBED WIRE<br />
80 Rods (1,320') Per Roll<br />
1/4 mile (80 Rods)<br />
84 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
80 Acres (480 Rods)<br />
1/4 mile<br />
(80 Rods)<br />
FEncE & POST cAlcUlATIOn GUIDE & cHARTS<br />
1/2 mile (160 Rods) 1/2 mile (160 Rods)<br />
SmOOTH WIRE<br />
• Uniform diameter along the whole roll<br />
• Heavy-duty galvanized finish resists rust<br />
• continuous rolls from start to end (without cuts)<br />
• meets the norm ASTm-A-641<br />
• class 3<br />
1 Rod = 16-1/2'<br />
1/4 mile = 1,320' (80 Rods)<br />
1/2 mile = 2,640' (160 Rods)<br />
1 mile = 5,280' (320 Rods)<br />
Square Field<br />
Fence<br />
No. of Steel<br />
Line Posts<br />
Acres Field Length Required* Required<br />
4-Corner<br />
Rods Feet Inches Rods Field<br />
1 12 10 9 51 47<br />
2 17 14 8 72 68<br />
3 21 15 ––– 88 84<br />
4 25 4 11 101 97<br />
5 28 4 8 113 109<br />
6 30 16 3 124 120<br />
7 33 7 8 134 130<br />
8 35 12 10 143 139<br />
9 37 15 8 152 148<br />
10 40 ––– ––– 160 156<br />
20 56 9 5 227 223<br />
30 69 4 8 277 273<br />
40 80 ––– ––– 320 316<br />
50 89 7 4 358 354<br />
60 97 16 2 392 388<br />
70 105 13 8 424 420<br />
80 113 2 3 453 449<br />
100 126 8 1 506 502<br />
120 138 9 4 554 550<br />
140 149 11 ––– 599 595<br />
150 160 ––– ––– 640 636<br />
320 226 4 7 905 901<br />
640 320 ––– ––– 1,280 1,276<br />
*Use ends and corner posts as required. Stretcher posts should<br />
be used at approximately 20-rod intervals for permanent farm<br />
fences. Subtract 1 line for every stretcher post to be used.<br />
FIElD FEncE<br />
20 Rods (330') Per Roll<br />
Galvanized WM<br />
Item # Description Gauge<br />
317527A 10# coils 9<br />
317525A 10# coils 11<br />
317524A 10# coils 12.5<br />
317523A 10# coils 14<br />
317577A 100# coils 9<br />
317576A 100# coils 10<br />
317575A 100# coils 11<br />
317574A 100# coils 12.5<br />
317573A 100# coils 14<br />
Rectagular Field<br />
Field Field Fence<br />
No. of Steel<br />
Line Posts<br />
Acres Length Width Required Required<br />
4-Corner<br />
Rods Rods Rods Field<br />
1 16 10 52 48<br />
1 20 8 56 52<br />
2.5 40 10 100 96<br />
4 32 20 104 100<br />
5 40 20 120 116<br />
6 60 16 152 148<br />
7 80 14 188 184<br />
8 80 16 192 188<br />
9 80 18 196 192<br />
10 50 32 164 160<br />
20 100 32 264 260<br />
30 80 60 280 276<br />
40 100 64 328 324<br />
50 100 80 360 356<br />
60 120 80 400 396<br />
70 160 70 460 456<br />
80 128 100 456 452<br />
100 160 100 520 516<br />
120 192 100 584 580<br />
140 280 80 720 716<br />
160 320 80 800 796<br />
320 400 128 1,056 1,052<br />
640 400 256 1,312 1,308
STOck 10 WIRE PAnEl<br />
This 50" tall panel comes in 16' lengths and is sold in bundles of 50 panels. constructed of 4-gauge<br />
wire with 10 horizontal wires running the length of the panel, these units can be lined up with T-posts<br />
to form fencing panels or can be affixed to wooden posts with steeples.<br />
Description Item # Height Approx. Weight Length<br />
Stock 10 Wire Panel cPS10 50" 36 lbs. 16'<br />
cOmBO THRIFTY WIRE PAnEl<br />
This 50" tall panel comes in 16' lengths and is sold in bundles of 50 panels. constructed of 4-gauge<br />
wire with 13 horizontal wires running the length of the panel, these units can be lined up with T-posts<br />
to form fencing panels or can be affixed to wooden posts with steeples.<br />
Description Item # Height Approx. Weight Length<br />
combo Thrifty Wire Panel cPcT 50" 43 lbs. 16'<br />
HOG WIRE PAnEl<br />
This 34" tall panel comes in 16' lengths and is sold in bundles of 50 panels. constructed of 4-gauge<br />
wire with 11 horizontal wires running the length of the panel, these units can be lined up with T-posts<br />
to form fencing panels or can be affixed to wooden posts with steeples.<br />
Description Item # Height Approx. Weight Length<br />
Hog Wire Panel cPH 34" 34 lbs. 16'<br />
HORSE WIRE PAnEl<br />
This 60" tall panel comes in 16' lengths and is sold in bundles of 25 panels. constructed of 6-gauge<br />
wire with 16 horizontal wires running the length of the panel and 2 x 4 spacing, these units can be<br />
lined up with T-posts to form fencing panels or can be affixed to wooden posts with steeples.<br />
Description Item # Height Approx. Weight Length<br />
Horse Wire Panel WPG16 60" 75 lbs. 16'<br />
4 x 4 UTIlITY PAnEl<br />
This 48" tall panel comes in 20' lengths and is sold in bundles of 50 panels. constructed of 6-gauge<br />
wire with 13 horizontal wires running the length of the panel, these units can be lined up with T-posts<br />
to form fencing panels or can be affixed to wooden posts with steeples.<br />
Description Item # Height Approx. Weight Length<br />
4 x 4 Utility Panel WP4466 48" 46 lbs. 20'<br />
W I R E P A N E L S<br />
tartergate.com 85
H A R D W A R E<br />
PAckAGED GATE AnD cORRAl HARDWARE<br />
Using very little space, <strong>Tarter</strong> now offers full-color pegboard packaging for more popular gate hardware showing<br />
photographs of each product in use. Ask your representative about high-margin <strong>Tarter</strong> Hardware, designed to attract<br />
attention and generate greater retail traffic. These selections and additional hardware are also available without packaging.<br />
Description Item # Approx. Weight Height Width<br />
2—5/8" x 13"Galvanized Threaded Hinge Pins HPG13P 3 lbs. 5" 16-1/2"<br />
2—3/4" x 12" HD Galvanized Threaded Hinge Pins HPHDG12P 4 lbs. 4-3/4" 15-1/2"<br />
2—5/8" x 10" Threaded Hinge Pins HP10P 2-2/5 lbs. 4-3/4" 13-1/2"<br />
2—3/4" x 6" HD Screw-In Hinge Pins HPHD6P 2-1/5 lbs. 4-3/4" 9-1/2"<br />
2—3/4" x 8" HD Screw-In Hinge Pins HPHD8P 2-3/5 lbs. 4-3/4" 11-1/2"<br />
2—5/8" x 6" Galvanized Screw-in Hinge Pins HPG6P 1 lb. 4-1/2" 9-1/4"<br />
2—22"Galvanized Snap chains cP 7/10 lb. 5-1/4" 8"<br />
2—32" HD Galvanized Snap chains HDGScP 1-1/2 lbs. 5" 9"<br />
2—1-3/4" Galvanized Bolt-on Hinges cHGP 1 lb. 4-1/2" 8-3/4"<br />
2—2" HD Galvanized Bolt-on Hinges cHHDGP 1-3/4 lbs. 4-1/2" 9"<br />
2—10"Galvanized corral Panel connectors cPc10P 2-1/4 lbs. 4-3/4" 12-1/2"<br />
2—Plated l-Pins lPPP 2 lbs. 4-3/4" 11-1/2"<br />
HPG13P<br />
HPHDG12P<br />
CP HDGSCP<br />
CHGP<br />
CHHDGP<br />
86 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
HP10P<br />
HPHD6P<br />
HPHD8P<br />
CPC10P<br />
HPG6P<br />
LPPP
GWHP<br />
CBGAP<br />
WL<br />
GL22P<br />
PAckAGED GATE AccESSORIES<br />
H A R D W A R E<br />
<strong>Tarter</strong> now offers a full line of Gate Accessories presented with full-color pegboard packaging<br />
showing photographs of each product in use. Ask your representative about these high-margin<br />
<strong>Tarter</strong> accessories, designed to attract attention and generate greater retail traffic.<br />
Description Item # Approx. Weight Width Height Diameter<br />
Gate Wheel GWHP 3-3/4 lbs. ––– ––– 7"<br />
cane Bolt Gate Anchor cBGAP 4 lbs. 3-3/4" 19" –––<br />
HD Two-Way lockable Gate latch Gl22P 5 lbs. 4-1/4" 11" –––<br />
1-5/8" – 2" O.D.<br />
Two-Way lockable Gate latch Gl21P 2 lbs. 4" 6-3/4" –––<br />
1-1/4" – 1-1/2" O.D.<br />
One-Way lockable Gate latch Gl1P 3-1/4 lbs. 5-3/4" 8-3/4" –––<br />
Wrangler latch Wl 7-1/4 lbs. 4-1/2" 31-1/2" –––<br />
<strong>Ranch</strong>er latch Rl 19-1/2 lbs. 37" 14" –––<br />
RL<br />
GL21P GL1P<br />
tartergate.com 87
H A R D W A R E<br />
58"<br />
88 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
HARDWARE AnD AccESSORIES PlAn-O-GRAm<br />
<strong>Tarter</strong> pre-packaged, pegboard-ready hardware and accessories allow you to<br />
quickly and easily create a high-margin pegboard display in your store. For a<br />
larger preview, please visit tartergate.com and click on the downloads section.<br />
40"
ATV HITcHES PlAn-O-GRAm<br />
<strong>Tarter</strong> pre-packaged pegboard-ready ATV hitches allow you to quickly and easily<br />
create a high-margin pegboard display in your store. For a larger preview please<br />
visit tartergate.com and click on the downloads section.<br />
40"<br />
H A R D W A R E<br />
58"<br />
tartergate.com 89
H A R D W A R E<br />
HPG6 HPG13<br />
CHG<br />
CHHDG<br />
HDGSC<br />
TUBE GATE HINGES (Non-Packaged)<br />
Approx.<br />
Description Item # Weight<br />
1-3/4" Hinge Galvanized CHG .45 lb.<br />
2" HD Hinge Galvanized CHHDG .85 lb.<br />
90 <strong>Tarter</strong> <strong>Farm</strong> and <strong>Ranch</strong> Product Guide<br />
C<br />
S<br />
HINGE PINS FOR 1-3/4" GATES (Non-Packaged)<br />
SL<br />
NUT<br />
HAY SPEAR REPLACEMENT PARTS<br />
SPKS<br />
HPHDG12<br />
Description Item # Approx. Weight<br />
5/8" x 6" Galvanized HPG6 .5 lb.<br />
Screw-in Pin<br />
5/8" x 13" Galvanized HPG13 1.5 lbs.<br />
Threaded Pin<br />
HINGE PINS FOR 2" GATES (Non-Packaged)<br />
Description Item # Approx. Weight<br />
3/4" x 12" Galvanized HPHDG12 2.0 lbs.<br />
Threaded Pin*<br />
*We do not recommend using smaller pins for 2" Heavy-Duty Gates.<br />
MISCELLANEOUS ITEMS (Non-Packaged)<br />
Description Item # Approx. Weight<br />
32" HD Galvanized HDGSC .75 lb.<br />
Snap Chain<br />
22" Galvanized Snap Chain C .40 lb.<br />
Description Item # Approx. Weight<br />
Hay Spear – fits SSGR, BSGR, FSSGR S 20.0 lbs.<br />
Spear Sleeve – fits SSGR, BSGR, FSSGR SL 4.25 lbs.<br />
Spear Nut – fits SSGR, BSGR, FSSGR NUT .25 lb.<br />
Spike – fits FSSGR SPKS 6.0 lbs.
BRing TARTER pROdUcTS<br />
inTO YOUR STORE TOdAY...<br />
...WiThOUT Adding A diME TO YOUR inVEnTORY!<br />
• Serves as an end-cap attached<br />
to a standard gondola or can be<br />
used as a freestanding display.<br />
Digitally printed graphics show<br />
actual <strong>Tarter</strong> products in use in a<br />
variety of traditional farming and<br />
hobbyist applications.<br />
• Made by <strong>Tarter</strong> from the same<br />
E-Coated steel tubing you’ll find<br />
on actual products.<br />
• Washable, laminate tabletop with<br />
binder rings holds page after page<br />
of full-color catalog that includes<br />
over 550 <strong>Tarter</strong> products.<br />
• Assembles in minutes using only<br />
a 9/16" wrench (easy-to-follow<br />
directions and parts list included<br />
with every end-cap).<br />
• Compare this sturdy, attractive<br />
display to other units costing<br />
hundreds of dollars more.<br />
• Use display to educate consumers<br />
about products you carry and<br />
take orders for products you don’t<br />
– <strong>Tarter</strong>’s fast service and low<br />
minimums let you place orders for<br />
delivery in 10 days or less in the<br />
east and 14 days or less in the west.<br />
tartergate.com 91
Why buy from <strong>Tarter</strong>?<br />
PRICE, SERVICE, QUALITY, PRODUCT SELECTION<br />
• Family owned and operated for over 60 years.<br />
• The best finish in the nation with Powder Coat.<br />
• Dependable service from our company-owned motor<br />
fleet, with orders filled in 10 days or less in the east<br />
and 14 days or less in the west – no back-orders!<br />
• 100% order fill rate.<br />
• Largest inventory in the nation.<br />
• Over 550 products among our product lines –<br />
all UPC coded.<br />
• Unsurpassed quality control processes.<br />
• Field support from “The Service People.”<br />
• Strong marketing drives consumers to your stores<br />
and strengthens loyalty to your company.<br />
P . O . b O x 1 0 • 1 0 7 3 9 s O U T H H w y . 1 2 7 • D U N N v I l l E , k y 4 2 5 2 8<br />
8 0 0 - 7 3 3 - 4 2 8 3 • 6 0 6 - 7 8 7 - 8 9 1 3 ( F A x ) • 8 8 8 - 4 T G - w E s T<br />
T A R T E R G A T E . C O M<br />
©2008, <strong>Tarter</strong> Gate Company, LLC. This catalog is protected by copyright and may not be reproduced in whole or in part without <strong>Tarter</strong>’s express, written permission.<br />
Although every precaution is taken, errors in specifications do occur. We reserve the right to correct any such errors. 10-2008