MPEG2-Encoder v5 Datasheet 1 Connector description - Maintech.de
MPEG2-Encoder v5 Datasheet 1 Connector description - Maintech.de
MPEG2-Encoder v5 Datasheet 1 Connector description - Maintech.de
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Datasheet</strong><br />
1 <strong>Connector</strong> <strong><strong>de</strong>scription</strong><br />
<strong>Connector</strong>s<br />
LEDs<br />
2<br />
3<br />
4<br />
1<br />
5<br />
2<br />
1<br />
6<br />
4<br />
copyright © SR-Systems <strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong> <strong>Datasheet</strong> v1.0 en<br />
16<br />
15<br />
1 4pin Hea<strong>de</strong>r ext. I 2 C-Bus<br />
1<br />
1 2<br />
7<br />
3<br />
1<br />
1 2<br />
13 14<br />
8<br />
9<br />
<strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong><br />
2 RCA plug audio left 0 dB signal level<br />
Signal level adaption only possible after circuit change on the <strong>Enco<strong>de</strong>r</strong> board!<br />
3 RCA plug audio right<br />
4 RCA plug vi<strong>de</strong>o Supported standards PAL/NTSC<br />
5 S-Vi<strong>de</strong>o Y/C vi<strong>de</strong>o input<br />
6 16pin Hea<strong>de</strong>r ext. vi<strong>de</strong>o and audio input<br />
7 2pin Hea<strong>de</strong>r vi<strong>de</strong>o co<strong>de</strong>c on/off<br />
8 14pin Hea<strong>de</strong>r ITU-656<br />
9 3pin Hea<strong>de</strong>r ext. audio input<br />
10 34pin Hea<strong>de</strong>r TS out connection to modulator/multiplexor<br />
a LED green Voltage 3.3 V ok<br />
b LED green Voltage 5.0 V ok<br />
c LED red Voltage 1.8 V ok<br />
1 2<br />
3334<br />
a<br />
b<br />
10<br />
c<br />
board dimensions: 80×100 mm<br />
1
<strong>Datasheet</strong><br />
2 Pin <strong><strong>de</strong>scription</strong><br />
1 – ext. I 2 C-Bus<br />
1 GND<br />
2 +5.0 V<br />
3 SDA<br />
4 SCL<br />
5 – Control<br />
1 PLL Clk 2 PLL Data<br />
3 PLL En2 4 PLL En1<br />
11 GND 12 GND<br />
13 IF in (50 MHz) 14 GND<br />
6 – ext. Vi<strong>de</strong>o + Audio<br />
1 GND 2 S/P-DIF<br />
3 GND 4 Audio L<br />
5 GND 6 Audio R<br />
7 GND 8 CVBS<br />
9 GND 10 Y or G<br />
11 GND 12 C/Cb or B<br />
13 GND 14 Cr or R<br />
15 GND 16 +5.0 V<br />
7 – Vi<strong>de</strong>o co<strong>de</strong>c on/off<br />
bridge to disable vi<strong>de</strong>o co<strong>de</strong>c<br />
8 – ITU-656<br />
1 +3.3 V 2 GND<br />
3 not connected 4 not connected<br />
5 VCLK 6 GND<br />
7 DVi<strong>de</strong>o 0 8 DVi<strong>de</strong>o 1<br />
9 DVi<strong>de</strong>o 2 10 DVi<strong>de</strong>o 3<br />
11 DVi<strong>de</strong>o 4 12 DVi<strong>de</strong>o 5<br />
13 DVi<strong>de</strong>o 6 14 DVi<strong>de</strong>o 7<br />
9 – ext. AF in<br />
1 Audio R<br />
2 GND<br />
3 Audio L<br />
copyright © SR-Systems <strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong> <strong>Datasheet</strong> v1.0 en<br />
<strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong><br />
10 – TS out<br />
1 +5.0 V 2 +5.0 V<br />
3 +5.0 V 4 +5.0 V<br />
5 SDA 6 not connected<br />
7 SCL 8 xReset<br />
9 GND 10 GND<br />
11 TSCLK in/out 12 PSYM<br />
13 not connected 14 DVAL<br />
15 TS 6 16 TS 7<br />
17 TS 4 18 TS 5<br />
19 TS 2 20 TS 3<br />
21 TS 0 22 TS 1<br />
23 GND 24 GND<br />
25 SD Out (f. E.*) 26 PLL THR (f. E.*)<br />
27 SDCLK (f. E.*) 28 SD In (f. E.*)<br />
29 GND 30 GND<br />
31 MCLK 27 MHz 32 ASCLK (f. E.*)<br />
33 RST Vid. Co<strong>de</strong>c 34 not connected<br />
*f.E. = for <strong>Enco<strong>de</strong>r</strong>s<br />
2
<strong>Datasheet</strong><br />
3 Dimensional drawing<br />
<br />
<br />
<br />
<br />
<br />
<br />
copyright © SR-Systems <strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong> <strong>Datasheet</strong> v1.0 en<br />
<br />
<br />
<br />
<br />
<br />
<br />
note: all dimensions are given in mm (1 inch=25.4 mm)!<br />
<br />
<br />
<br />
<strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong><br />
The board itself is 2.0 mm thick, the maximal component height is 14.0 mm from the top of the board. The safety<br />
clearance for component pins should be 2.0 mm from the bottom of the board.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
3
<strong>Datasheet</strong><br />
Errata/corrections:<br />
25.05.2011 First release<br />
copyright © SR-Systems <strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong> <strong>Datasheet</strong> v1.0 en<br />
<strong>MPEG2</strong>-<strong>Enco<strong>de</strong>r</strong> <strong>v5</strong><br />
The information in this manual was compiled with great care and to our best knowledge; nevertheless there might be some errors<br />
left in this document. We do not take legal or any other responsibility for the correctness of any information.<br />
This doument is protected by copyright law. All rights including copying, translation, microfilming as well as storage and processing<br />
in electronic systems are reserved.<br />
We are happy to receive your comments and questions:<br />
SR-Systems Tel.: +49 (66 63) 91 88 66<br />
Brü<strong>de</strong>r-Grimm-Straße 130 Fax: +49 (66 63) 91 88 67<br />
36396 Steinau eMail: DATV@SR-Systems.<strong>de</strong><br />
4