The Leitz-Lexicon

1. Sawblades
1. Sawblades 1.3 Sawblades for cutting across grain
42
For cross cutting to a high cut quality and
positive hook angle
● available ex stock
▫ available at short notice
HW
Designed for tear-free cutting across grain and sizing dry solid woods, timber products
coated with plastics, paper and veneered timber products and laminated woods
respectively up to 40 mm cutting height. For splitting, mitre saws and saw benches.
WK 159-2 *
Class. D SB TDI BO NLA FLD Z ZF ID Nr.
mm mm mm mm mm mm
* 255 2,8 2,0 30 2/10/60 120 80 WZ/FZ 065888 ●
* 355 3,0 2,2 30 2/10/60 120 120 WZ/FZ 065890 ●
* 305 3,0 2,2 30 2/10/60 120 100 WZ/FZ 065889 ●
Designed for noise-reduced, tear-free cutting across grain and sizing dry solid woods,
timber products coated with plastics, paper and veneered timber products and laminated
woods up to 40 mm cutting height. For splitting-, mitre saws and saw benches.
Noise reduced design AS OptiCut – noise reduction up to 5 dB(A) in free running.
Tool body with vibration-damping laser ornaments.
WK 179-2-50 *
Class. D SB TDI BO NLA FLD Z ZF ID Nr.
mm mm mm mm mm mm
* 300 3,0 2,2 30 2/10/60 100 100 WZ/FZ 068550 ●
Designed for low-noise, tear-free cuttings across grain and sizing dry solid woods,
timber products coated with plastics, paper and veneered timber products and
laminated woods up to 80 mm cutting height. For splitting machines, double cutoff-devices
and saw benches.
WK 206-2 *
Class. D SB TDI BO NLA FLD Z ZF ID Nr.
mm mm mm mm mm mm
* 350 3,2 2,2 30 2/10/60 120 54 HZ 058805 ●
* 400 3,2 2,2 30 2/10/60 140 60 HZ 058806 ●